2005 Mercedes Benz E500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes Benz › E500 › 2005
These records cover every 2005 Mercedes Benz E500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2005 Mercedes Benz E500. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.
Risk and remedy
Risk
A detached sunroof panel can become a road hazard, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the sunroof panel as necessary, free of charge. Owner notification letters were mailed January 10, 2025. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of previous NHTSA recall number 22V-954. MBUSA's number for this recall is 2024120001/2/3.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please refer to MBUSA's recall report for specific vehicle model details. The glass sunroof panel may not be properly secured and may detach.
Risk and remedy
Risk
A detached sunroof panel may become a road hazard, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the sunroof panel as necessary free of charge. Owner notification letters were mailed February 3, 2023. Owners may contact MBUSA customer service at 1-800-367-6372. This recall expands NHTSA recall number 19V-918. MBUSA's numbers for this recall are 2023010004, 2023010005, and 2023010006.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2001-2011 vehicles. The bonding between the glass panel and the sliding roof frame may deteriorate, possibly resulting in the glass panel detaching from the vehicle. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V918-4126.pdf
Risk and remedy
Risk
A detached glass panel can separate from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
MBUSA will notify owners, and dealers will inspect the glass panel bonding and replace the sliding roof, as necessary, free of charge. The recall began July 10, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020040011.
Owner complaints
140 complaints4 involved a crash4 injuries
What owners report most
Latest complaints
- Service brakes
This is not about an accident. It's about the vehicle's condition. Precisely, about the brake service warning. Red warning with beeping on dashboard saying I need to bring it to workshop for service. My wife was driving this car when she felt something was wrong with the car and she brought it to…
This is not about an accident. It's about the vehicle's condition. Precisely, about the brake service warning. Red warning with beeping on dashboard saying I need to bring it to workshop for service. My wife was driving this car when she felt something was wrong with the car and she brought it to her trustful mechanic for check up right away sameday That mechanic gave up to look any further suggesting a visit to MB dealer.
- Engine · Fuel/propulsion system
Car smells like gas. Constantly a couple machanic. Did some repairs. But there’s a small leak as well from a smoke test. Gas leaks in more than one area. Oil leaks everywhere. Evap leak didn’t pass smog. Then went to a smog station and repair. Check engine light back on again. I saw Mercedes had an…
Car smells like gas. Constantly a couple machanic. Did some repairs. But there’s a small leak as well from a smoke test. Gas leaks in more than one area. Oil leaks everywhere. Evap leak didn’t pass smog. Then went to a smog station and repair. Check engine light back on again. I saw Mercedes had an extended warranty to avoid recalling several safety complaints. I got the car from a guy who never looked into recalls or extended warranty for these complaints. Please help me to get refunded what I payed so far with repairs on gas leaks. Also to repair the whole gas system. It is dangerously ongoing. I never got notified by Mercedes nor did the previous owner.
- Fuel/propulsion system · Suspension · Unknown or other
2005 e500 mercedes benz,after full tank of gas I filled. I noticed very strong gas inside my car and outside. It can catch on fired. cause cancer and lung issues.
- Fuel system, gasoline
The contact owns a 2005 Mercedes-Benz E500. The contact stated that fuel was leaking from the fuel tank. There was an abnormal odor of fuel inside the vehicle. The contact refueled the vehicle and there was an abnormal odor of fuel outside of the vehicle. There were no warning lights illuminated.…
The contact owns a 2005 Mercedes-Benz E500. The contact stated that fuel was leaking from the fuel tank. There was an abnormal odor of fuel inside the vehicle. The contact refueled the vehicle and there was an abnormal odor of fuel outside of the vehicle. There were no warning lights illuminated. The contact called the local dealer, who stated there was no warranty coverage. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The approximate failure mileage was 40,000.
- Air bags
Had a minor accident no airbags deployed sitting in car I don’t know a month later something around that sitting in car key not in the ignition sitting in the driver seat when all of a sudden a big bang happened and blue out both side airbag by the sunroof sunroof. Was very loud and knocked my head…
Had a minor accident no airbags deployed sitting in car I don’t know a month later something around that sitting in car key not in the ignition sitting in the driver seat when all of a sudden a big bang happened and blue out both side airbag by the sunroof sunroof. Was very loud and knocked my head sideways. Nothing had touch the car car hadn’t been hit car was sitting in the driveway with no ignition running no key in the ignition.
- Service brakes
Per incident was back glass detached from window and broke all over the road and on the back of my car while driving. 2: Sbcc pump goes in and out admittedly and type of a no brake issue at all hard as a rock will not move car only has 180,000 miles on it and it’s been doing that since…
Per incident was back glass detached from window and broke all over the road and on the back of my car while driving. 2: Sbcc pump goes in and out admittedly and type of a no brake issue at all hard as a rock will not move car only has 180,000 miles on it and it’s been doing that since 140,000 miles Which did cause me to get in a minor accident on the right side of the car the passenger side where now I’ve had to replace a fender and still have problems because of it
- Electrical system · Unknown or other
Several times if the vehicle is not driven in a day or two the battery would be dead.I had to replace the battery twice in 2 years. I now receive a message (check battery) every time I start the vehicle. I bought a battery charger that I keep with me all the time. Once a month I put the vehicle on…
Several times if the vehicle is not driven in a day or two the battery would be dead.I had to replace the battery twice in 2 years. I now receive a message (check battery) every time I start the vehicle. I bought a battery charger that I keep with me all the time. Once a month I put the vehicle on a battery charger, and if I’m not going to use it for a week or more,I put it on a trickle charger. I own 2 other vehicle and none of them need this type of treatment.
- Engine · Power train · Service brakes
I was traveling at about 60mph and started to slow to turn off the highway. Suddenly a red brake warning light came on and it took tremendous pressure to slow the car down and I overshot the turn. Then the car had no power. I was 36 miles from my home. I limped at 5-20 mph to a friends house and…
I was traveling at about 60mph and started to slow to turn off the highway. Suddenly a red brake warning light came on and it took tremendous pressure to slow the car down and I overshot the turn. Then the car had no power. I was 36 miles from my home. I limped at 5-20 mph to a friends house and had the car towed to my home. There was absolutely no warning of any kind of brake problem. The car was driving just fine before this happened. I believe it could have been a much worse situation had I been in any kind of traffic.
- Suspension
I was sold this car and because I did not know what the red "STOP CAR TOO LOW WARNING" meant when I was driving it home, I was not only scammed by the used car dealership with no recourse, but I also was tricked into driving this car while it was not supposed to be driven for safety, per the manual…
I was sold this car and because I did not know what the red "STOP CAR TOO LOW WARNING" meant when I was driving it home, I was not only scammed by the used car dealership with no recourse, but I also was tricked into driving this car while it was not supposed to be driven for safety, per the manual of the vehicle. I will include a picture of the safety message from the manual where it states, "HIGH PRIORITY MESSAGES APPEAR IN THE MULTIFUNCTION DISPLAY IN RED COLOR". and the STOP CAR TOO LOW message states very specific safety instructions that a reasonable person could not know. I am filing this recall complaint because how the system operates. I was sold this car while the struts were faulty and had already developed a leak and because the car was currently running the AIR COMPRESSOR was able to keep up with the leak during the test drive because a slow leak will only go back down after an extended time period which I believe the dealer knew because he asked me how much I was trying to spend and all of a sudden he pulled my car out of their shop telling me they just got the car and haven't put it out yet. Please help me. When I parked the vehicle at a Golf course parking lot during the test drive I was with my uncle, I did look up mechanic shops but because the car dealership was located in Farmington, MN there was no place feasibly close enough for me to have the vehicle properly inspected. The issue is the ride of the vehicle on the air suspension was perfect so there was no way of me knowing the car was not supposed to be driven over 50 mph which you will see on the safety instructions, and the vehicle could have caused an accident because there was no way of me knowing the suspension being too low could cause the wheels to rub on the wheel well if the car is too low. I even added more radiator coolant the next day when I was driving the car and the STOP CAR TOO LOW WARNING came on again. Over $5000 in repairs that I had to do because of safety, please help me.
- Fuel/propulsion system
The 2005 E500 W211 gas tank cracks leaking fuel sending unit and fuel pump. The odor of gas permeates the cabin, recall campaign number 2008-020001, and it’s extension information of 15 years dated Jan. 2015 signed by Ralph S. Fisher GM customer assistance center. The dealer in Hawai’i refuse to honor the recall warranty. It’s traveling a bomb.
- Fuel system, gasoline · Seats
TL* the contact owns a 2005 mercedes-benz E500. The contact stated there was an abnormal fuel odor detected. The vehicle was taken to euro auto center (5180 venice blvd los angeles, ca 90019, (323) 938-9888) to be diagnosed. The contact was informed that the rear seats were soaked in fuel. The…
TL* the contact owns a 2005 mercedes-benz E500. The contact stated there was an abnormal fuel odor detected. The vehicle was taken to euro auto center (5180 venice blvd los angeles, ca 90019, (323) 938-9888) to be diagnosed. The contact was informed that the rear seats were soaked in fuel. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 50,000. ## vin passed ## mercedes-benz E500 2005 ##
- Suspension
I have replaced the suspension before and now the suspension light comes back on. the car IS down lower than normal. this IS all the time.
- Fuel/propulsion system
Emission system has multiple issues over time that cause check engine ligjt to engage. Problem s range from, gas cap to fuel tank parts to valves to carbon canister issues. All issues occur when vehicle IS stationary and in motion. No impact.
- Suspension
I was driving my 2005 E500 4matic mercedes hit a giant pot hole busting my left passenger rim n wheel. Suspension malfunction begin by the car not rising due to a malfunction. Reported the incident to scdot on 12/5/2019. My claim was denied. I received a letter stating the pot hole was fixed a d they were unaware of the damaged road because no other reports was made about the gigantic pothole. *tr
- Visibility/wiper
TL* the contact owns a 2005 mercedes benz E500. The contact stated that water entered the cabin of the vehicle from the sunroof. The contact stated that the water entered the sunroof, rolled down the driver's side door and into the engine compartment. The battery and service engine warning lights…
TL* the contact owns a 2005 mercedes benz E500. The contact stated that water entered the cabin of the vehicle from the sunroof. The contact stated that the water entered the sunroof, rolled down the driver's side door and into the engine compartment. The battery and service engine warning lights were illuminated. The vehicle was taken to an independent mechanic where the auxiliary battery, the rear battery, and the alternator were replaced however, the failure recurred. The contact then received notification of nhtsa campaign number: 19v918000 (visibility). (Rbm of atlanta, inc. 7640 roswell rd, atlanta, ga 30350) was notified of the recall and informed the contact that the part for the recall repair was unavailable. The manufacturer was not notified of the failure. The failure mileage was 170,000. Vin tool confirms parts not available.
- Service brakes
TL* the contact owns a 2005 mercedes-benz E500. While driving at an unknown speed, the brakes lost power and did not stop the vehicle. In addition, the 'stop driving the vehicle' warning indicator illuminated. The contact used the emergency brake to stop the vehicle. The vehicle was taken to…
TL* the contact owns a 2005 mercedes-benz E500. While driving at an unknown speed, the brakes lost power and did not stop the vehicle. In addition, the 'stop driving the vehicle' warning indicator illuminated. The contact used the emergency brake to stop the vehicle. The vehicle was taken to mercedes-benz of encino (888-280-0902, located at 16721 ventura blvd, encino, ca 91436). The technician was unable to diagnose the failure, but assured the contact that the vehicle would be repaired. The failure recurred a couple of times and the vehicle was taken to keyes european mercedes-benz (818-574-5053, located at 5400 van nuys blvd, sherman oaks, ca 91401) where a diagnostic test was recommended. The manufacturer was made aware of the failure and informed the contact that he would be called back. The vehicle was not repaired. The vin and failure mileage were not provided.
- Air bags
The warning light indicating that the airbag might not deploy IS illuminated. Could this be a manufracturing defect?
- Fuel/propulsion system
Fuel pump under warranty and mercedes dealer refused to reimburse for repair
- Fuel/propulsion system
2005 mercedes E500 wagon has a strong fuel odor inside and outside the vehicle when the fuel tank IS completely filled. This odor persists for a few days until the fuel level has gone down. This has persisted for about a year. due to this safety issue, mb has extended the warranty on this part…
2005 mercedes E500 wagon has a strong fuel odor inside and outside the vehicle when the fuel tank IS completely filled. This odor persists for a few days until the fuel level has gone down. This has persisted for about a year. due to this safety issue, mb has extended the warranty on this part to repair it. Vehicle was taken to mb of plano for repair. Once the technician confirmed the fuel tank needed to be replaced, the technician followed the procedure which requires them to remove the muffler system to remove the fuel tank. The technician stated that a muffler bracket was rusted and would need to be replaced to complete the repair. The dealership notified me that this bracket IS only available as a part of the complete muffler and would cost ~$600 to replace and would not be covered by the warranty. The muffler was operating properly and does not need to be replaced for any other reason. the dealership appealed the warranty and that was denied. I appealed to the mercedes executive referral team and they also denied the claim due to the age and mileage of the vehicle. if I am not willing to spend $600 to replace a perfectly good muffler, then I will have to drive a vehicle with two small children that has a live gasoline leak inside the cabin because mercedes benz will not replace the muffler bracket. I have been in contact with ralph at mercedes benz executive referral as well as the mercedes benz of plano service department.
- Fuel/propulsion system · Unknown or other
I took my car to the dealership because it was a red battery on the dash board, I was told I need a fuel pump, I told the dealership I have a warranty for this, but I was told the paper I have explain what a warranty IS, I called mercedes headquarters several times and I was told I keep calling…
I took my car to the dealership because it was a red battery on the dash board, I was told I need a fuel pump, I told the dealership I have a warranty for this, but I was told the paper I have explain what a warranty IS, I called mercedes headquarters several times and I was told I keep calling about the same thing its in the notes it IS up to the service manager to approve the warranty I had to pay for the car repairs even tho I had a warranty. I took my car to another mechanic and I was told I need a battery, my car in the streets while I was driving to the dealership I called and had it towed to the dealership my grandbaby and I was in the heat for over an hour waiting for the tow truck, I also took my car to goodyear and they put it on the computer 2X and they did not know why the red light was on they but though I just need another battery
- Service brakes
TL* the contact owns a 2005 mercedes-benz E500. The contact stated that the brake pedal was depressed and traveled to the floorboard. In order to stop the vehicle, the contact downshifted into park and coasted with the park pedal depressed. The contact stated that the brake warning indicator…
TL* the contact owns a 2005 mercedes-benz E500. The contact stated that the brake pedal was depressed and traveled to the floorboard. In order to stop the vehicle, the contact downshifted into park and coasted with the park pedal depressed. The contact stated that the brake warning indicator illuminated and 'the vehicle does not have sufficient power to stop' appeared. The vehicle was taken to an independent mechanic who diagnosed that the pentatonic brake connection failed. The contact stated that the vehicle exhibited the same symptoms as listed in nhtsa campaign number: 05v133000 (service brakes, hydraulic). The manufacturer was notified and informed the contact that the vin was not included in the recall. The vehicle was not repaired. The failure mileage was 133,000.
- Service brakes
When driving on interstate, in wet conditions at speeds of 65mph+ ,the esp&abs warning lights came on and car became very difficult to steer and stop. Was able to move off interstate and had car towed to mercedes-benz dealership. Was told the ABS brake module esp control had to be replaced…
When driving on interstate, in wet conditions at speeds of 65mph+ ,the esp&abs warning lights came on and car became very difficult to steer and stop. Was able to move off interstate and had car towed to mercedes-benz dealership. Was told the ABS brake module esp control had to be replaced $1,100.00. Since having that done the car IS still at dealership because now the sbc module needs replaced, which IS another $1,600.00.
- Electrical system · Service brakes
TL* the contact owns a 2005 mercedes-benz e500w, while driving approximately 60 mph, the contact depressed the brake pedal, but the brakes failed. As a result, the contact drove through a stop light. The contact stated that the epc warning indicator was illuminated. The contact coasted the vehicle…
TL* the contact owns a 2005 mercedes-benz e500w, while driving approximately 60 mph, the contact depressed the brake pedal, but the brakes failed. As a result, the contact drove through a stop light. The contact stated that the epc warning indicator was illuminated. The contact coasted the vehicle to the side of the road and was able to resume driving. The vehicle was taken to an independent mechanic where it was diagnosed that the epc unit failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 129,000.
- Service brakes
I was exiting the interstate freeway onto a frontage road (travelling ~45mph). A warning message said that there was a failure of the braking system. I tried to slow down, but had lost all braking power. Fortunately, there was no one in front of me. The vehicle automatically downshifted to a low…
I was exiting the interstate freeway onto a frontage road (travelling ~45mph). A warning message said that there was a failure of the braking system. I tried to slow down, but had lost all braking power. Fortunately, there was no one in front of me. The vehicle automatically downshifted to a low gear which helped slow me down. I came to a stop in a safe location, put the car in park, and turned off the engine. When I re-started the car, normal braking function returned. The mercedes dealership said that this was a normal issue with this model. A hydraulic unit of some sort needed replacing.
- Service brakes
TL* the contact owns a 2005 mercedes-benz E500. While driving 75 mph, the advisory brake malfunction warning indicator illuminated. The contact was able to coast to the shoulder lane. When the vehicle was turned off and restarted, it operated normally. The vehicle was taken to an unknown dealer…
TL* the contact owns a 2005 mercedes-benz E500. While driving 75 mph, the advisory brake malfunction warning indicator illuminated. The contact was able to coast to the shoulder lane. When the vehicle was turned off and restarted, it operated normally. The vehicle was taken to an unknown dealer where the contact was advised that they were aware of the failure. The dealer stated that diagnostic testing could only be performed while the failure occurred. The contact was also informed that the vehicle was not included in nhtsa campaign number: 04v296000 (service brakes, hydraulic). The manufacturer stated that the warranty repair for the sensotronic brake control failure had expired. The vehicle was not repaired. The failure mileage was 101,386.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Fuel Leakage From The Fuel Tank
The Office of Defects Investigation (ODI) opened this investigation on January 23, 2012 as PE12-001 based on 20 consumer reports in model year (MY) 2003-2006 E55 AMG vehicles.Based on new reports in other E-Class vehicles, ODI upgraded the investigation to Engineering Analysis (EA) 13-003 on March 15, 2013, and…
The Office of Defects Investigation (ODI) opened this investigation on January 23, 2012 as PE12-001 based on 20 consumer reports in model year (MY) 2003-2006 E55 AMG vehicles.Based on new reports in other E-Class vehicles, ODI upgraded the investigation to Engineering Analysis (EA) 13-003 on March 15, 2013, and expanded the scope to all E-Class vehicles through MY 2008.The complainants alleged a strong odor of gasoline fuel both inside and outside of their vehicle, particularly after refilling the fuel tank.Many of the complainants noted that the odor subsided or went away after driving some distance thereby lowering the fuel level in the tank.Other owners reported they would only fill the tank to about three quarters full to avoid the odor altogether.Some complainants alleged fuel leaked from the fuel filter/sender, located on the top of the fuel tank on the driver's side, and collected on top of the tank.There were also allegations that the fuel leaks were associated with an Emissions Recall Campaign (No. 2008020001) conducted by Mercedes-Benz USA, LLC (Mercedes) in 2008 on MY 2003-2006 E-Class and CLS-Class AMG models.The issue in the recall involved small cracks in the pressurized outlet fitting of the fuel filter/sender.AMG vehicles are high performance models that operate at higher fuel pressure and use a different fuel filter/sender and fuel pump than non-AMG models.Information on Recall No. 2008020001 is available from the U.S. Environmental Protection Agency (EPA) website at www.EPA.gov.ODI's investigation found various leak sources that are unrelated to the outlet fitting cited in the EPA recall campaign.Through interviews with complainants, field inspections of complaint vehicles, and the collection and laboratory analysis of failed parts, three identifiable leak sources were found.The component parts and areas of the leaks involve the On-Board Diagnostic fuel tank pressure sensor (located on top of the fuel filter/sender), the outlet of the centrally mounted fuel tank fuel filling limiter valve, and the top of the fuel pump. These areas of leakage are located at the top of the fuel tank in unpressurized parts of the fuel system. When the tank is full, fuel can slowly weep/seep from micro-cracks in these components and may collect in cavities on top of the filter/sender, pump, or tank.Contrary to complainant's allegations that fuel entered the inside of their vehicle under the rear seat bench, neither ODI nor Mercedes found a plausible way for this to occur.The fuel tank is located outside of the passenger compartment, attached to the underside of the vehicle.The service access ports for the fuel filter/sender (driver's side) and fuel pump (passenger's side) are located under the rear seat bench, covered by a steel plate, sealed and bolted to the vehicle floor.When technicians service the fuel filter/sender, which has a regularly scheduled 60,000 mile service interval, and/or the fuel pump, the work is performed from inside the vehicle by working through the access ports.By letter dated September 4, 2014, Mercedes has notified the agency that it will extend the original warranty coverage to 15 years and unlimited mileage on Covered Fuel Tank Components in E-Class vehicles in MY 2003-2009 and CLS-Class vehicles in MY 2006-2011.The covered fuel tank components for the warranty extension include the fuel tank, fuel filter/sender, fuel pump, and all related gaskets/seals and retention rings.ODI is closing this investigation based on the manufacturer's extend warranty of the affected fuel system components and in consideration that the nature of the leaks does not appear to present an un
- Driver Air Bag Circuit High Resistance
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty…
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
- 11008323Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove headlamps. 2. Remove all grommets from outlet openings. 3. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation diaphragm to work properly! 4. Remove existing service cover. 5. Place desiccant packs into the new service covers and bolt down (Picture_01). 6. Glue the new diaphragm onto the intended surface at the service cover (Picture_02). Note: The bonding surface must be clean and dry. 7. Attach service cover with desiccant pack at headlamp. 8. Install headlamp. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_03). 2. The new transparent diaphragm must be correctly bonded (Picture_04). 3. Check headlamp housing for any external damage.
- 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
- 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
- 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
- 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
- 10252770As previously reported, to enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a Settlement regarding claims relating to allegations that the 590 Mars Red paint available as an original, exterior color option for certain models of Mercedes-Benz vehicles may experience peeling, flaking, or bubbling of the exterior paint or clear coat. This Mars Red paint is sometimes referred to as Fire Opal. The purpose of this update is to alert you that: 1. The Settlement has received final approval. The Settlement will go into effect on March 11, 2024. As of that date, customers are eligible to receive extended warranty coverage under the Settlement. 2. Under the Settlement, an eligible customer might receive extended warranty coverage as of the date the vehicle is presented to your dealership OR certain customers might have validated Qualified Future Repair claims, making them eligible for a different level of coverage. To determine if a customer: (a) is eligible for extended warranty coverage; and (b) what level of warranty coverage is available to them, please refer to the Service Packages section in VMI/Netstar. 3. Damage code 21800 (damage type 00) must be used for warranty claims covered pursuant to the Settlement. Please note that you should only claim for the percentage of warranty repair cost reflected in VMI/Netstar (see below, e.g., for Period Two, claim only 50% of warranty repair cost). 4. Before the dealership agrees to perform any work: The customer should be given a Repair Order containing: (1) an estimate for the repair, (2) the portion covered under the extended warranty; and (3) the customers contribution amount for the repair, if applicable. The customer must agree to pay their contribution amount for the repair and sign the Repair Order before the repair is performed.
- 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
- 10235972Enclosed for your information and pursuant to part 579.5, please find our latest Service and Warranty Bulletins for March, 2016
- 10205233Mobile phone cotacts are not transferred completely.
- 10205225Headlamps fogged.
- 10186142Unmotivated Reaction from Park Assist - model series 213 facelift / 238 facelift with option code 235 (active par- king assist) and option code 501 (surround view system)
- 10186135If the customer brakes sharply from a speed of > 30mph, without ABS intervention, there is a single cracking noise from the area of the ESP hydraulic unit
- 10181124Harsh engagement when changing gear range from P to D or R
- 10181123Harsh engagement when changing gear range from P to D
- 10179951AIRMATIC Fault Message "Max 80 km/ h (50 mph) " In Instrument Cluster
- 10167561Xenon burner inoperative or flickers
- 10167525Apple products (iPhone or iPod) are not charged via the serial USB interface of the COMAND Online control unit (A40/3) in the stowage compartment of the center console.
- 10167489Noise: A rattling noise may be heard from the area of the chain drive for approx. 2-5 seconds after engine start. And/or: Fault code entries in engine control unit: SIM271DE20: P001177 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The commanded position cannot be reached. P001762 The position of the exhaust camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. The signal comparison is faulty. P001192 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The function or the instruction is faulty. P001195 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The mechanical setup is not OK. P001477 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The commanded position cannot be reached. P001492 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The function or the instruction is faulty. P001495 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The mechanical setup is not OK. P001600 The position of the intake camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. P001662 The position of the intake camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. The signal comparison is faulty. P001700 The position of the exhaust camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft.
- 10167000Surface damage on steering wheel trim
- 10166982During disengagement from D to N and/or from R to N some slight jolting could be experienced.
- 10166976Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual"
- 10166975This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014.
- 10166103The controls on the partially electric seat adjustment switch stick or are loose or broken.
- 10166092Dynamic seat control is not functioning correctly and/or air cushions do not inflate fully.
- 10166090Possible complaints: 1. Memory function of electric seat fore/aft adjustment not functioning. 2. Seat fore/aft adjustment with easy entry/exit feature not functioning. 3. Head restraint presetting not functioning. 4. Seat fore/aft adjustment can only be adjusted for 2 sec with the seat adjustment switch (seat can only be adjusted in longitudinal direction in fits and starts). 5. Function "Collision avoidance when folding down the rear seat backrest" not functioning (seat fails to move forward when the rear seat backrest is folded down).
- 10166084Rubbing noises at the point at which the covering rubs against the cover. Only occurs on vehicles with the sport package .
- 10166083Rubbing noises arise between the covering and cover of the sidebag
- 10166082Noises from area of seat adjuster or cushion frame.
- 10166081Noise complaints when load on backrest frame changes. Affects the driver and front passenger seats. Also perform the remedial action if you are performing work on: - backrest frame - backrest cover or - guide rail of head restraint. If the backrest frame is exposed as a result, the actions must always be performed in order to avoid follow-up repairs.
- 10165849AIRCAP functions excessively
- 10165844Possible minor leakage at described components or oil transfer from assembly plant.
- 10165839Shift quality complaints on TRANSMISSION 722.9 (7G-TRONIC and 7G-TRONIC PLUS)
- 10158329Oil in engine wiring harness
- 10151959Seat belt extender toothed rack sluggish or makes noises
- 10151948Display of suspension setting in head unit implausible
- 10151924Liftgate intermittently does not open fully
- 10136029SENTEX gate operator with Clik Card Remote not compatible with Homelink
- 10135628iPhone mobile phone: Various complaints after software update to iOS8
- 10135598Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "Implausible data were received from the ethanol sensor"
Every Mercedes Benz E500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.