2010 MINI Cooper
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › MINI › Cooper › 2010
These records cover every 2010 MINI Cooper. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2010 MINI Cooper. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2008-2014 MINI Clubman Cooper, Clubman Cooper S, Clubman John Cooper Works, and 2007-2013 MINI Hardtop 2-Door Cooper, Cooper S, and John Cooper Works vehicles sold, or ever registered, in Alaska, Colorado, Connecticut, Delaware, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts…
Risk and remedy
Risk
An electrical short-circuit can increase the risk of a fire.
Remedy
Dealers will inspect the sunroof drains, interior footwell area, and FRM and, depending upon the results of the inspection, certain components will be replaced. Owner notification letters were mailed May 13, 2024. Owners may contact BMW customer service at 1-866-825-1525.
BMW IS recalling certain model year 2010 MINI cooper and cooper s vehicles for failing comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." the affected vehicles were equipped with 17 inch wheels, but their label states that they were equipped with 16 inch wheels. also the tire pressure stated on the…
Risk and remedy
Risk
Erroneous tire information could lead to improper tire fitment and inflation which could affect the durability of the tire and the stability of the vehicle, increasing the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the recall began on march 4, 2010. owners may contact BMW at 1-800-831-1117.
Owner complaints
92 complaints3 involved a crash7 involved a fire9 injuries
What owners report most
Latest complaints
- Electrical system · Exterior lighting · Unknown or other
The dealer refused to perform the required FRM recall inspection and denied the recall without providing any of the federally required documentation. I was forced to pay out‑of‑pocket for the FRM module replacement even though my VIN is listed under the safety recall. MINI of Murray stated my FRM…
The dealer refused to perform the required FRM recall inspection and denied the recall without providing any of the federally required documentation. I was forced to pay out‑of‑pocket for the FRM module replacement even though my VIN is listed under the safety recall. MINI of Murray stated my FRM “failed,” but admitted they never opened the module, which is required to determine internal moisture intrusion. • The Service Manager stated they based their denial on “carpet and headliner moisture,” which is not part of the FRM recall inspection procedure. • I requested the FRM inspection report, photos, and the MINI Corporate denial code. I received none of these. • MINI Corporate Recall Team confirmed they had no documentation from the dealer and incorrectly stated that the module does not need to be opened. • Without a completed inspection uploaded to MINI Corporate, a denial code cannot be generated. • I was charged for the FRM replacement part, even though the recall should cover the repair if the module is affected. • The dealer only offered to waive a $149 programming fee. Safety Concern: The dealer failed to follow required recall procedures, failed to document the inspection, and denied federally mandated recall coverage without evidence. This violates recall protocol and leaves the safety defect unresolved. The module was replaced at my expense.
- Electrical system · Exterior lighting
The vehicle is experiencing repeated failure of the Footwell module (FRM), a known defect acknowledged by MINI/BMW. During the two years I have owned the vehicle, the FRM has required four separate reflashes due to recurring malfunctions. The failure causes loss of proper power window operation…
The vehicle is experiencing repeated failure of the Footwell module (FRM), a known defect acknowledged by MINI/BMW. During the two years I have owned the vehicle, the FRM has required four separate reflashes due to recurring malfunctions. The failure causes loss of proper power window operation, including the passenger window reversing or rolling down unexpectedly, and loss or malfunction of other body electrical functions controlled by the FRM. Headlamps will not turn off, resulting in a dead battery and electrical/intermittent dash light surges. The FRM failed again after a software reflash, which is a documented trigger for FRM internal memory corruption. MINI/BMW issued and Extended Limited Warranty for FRM failure, acknowledging this defect; however, I received the official notice after the warranty period had already expired, leaving no opportunity to repair the defect while covered. This failure affects safe operation of the vehicle, including the inability to properly secure windows and maintain normal electrical functionality. The issue is not due to wear or misuse, but an internal electronic defect recognized by the manufacturer. The repeated nature of the failure and reliance on reflashing demonstrate the defect was never fully resolved. I am reporting this issue to document the repeated failures, late manufacturer notification, and ongoing safety-related electrical system issues. I purchased the vehicle with 86,000 miles. It now has 100,000, well below the criteria for the LW. In the 14,000 miles and two years I have owned and driven it, it has required four FRM reflashings. Had I known about the Extended Limited Warranty, I would have had BMW repair it under said warranty. That wasn't possible because I received notice of the known failure after the ELW expired.
- Engine
Engine issues Engine leaks over heating seal gasket Timing bell Engine missed firing
- Air bags · Seat belts
Passenger Airbag sensor is off even when passenger is in the seat and airbag should be on.
- Electrical system · Engine · Steering
On Thursday I was driving my 2010 Mini Cooper S with 75,000 miles on it and there was a total and sudden power outage on the high way. I was able to get to the breakdown lane and had it towed. My mini certified garage ran the computer on it and the car started right up. It was due for an inspection…
On Thursday I was driving my 2010 Mini Cooper S with 75,000 miles on it and there was a total and sudden power outage on the high way. I was able to get to the breakdown lane and had it towed. My mini certified garage ran the computer on it and the car started right up. It was due for an inspection so we did an oil and filter and put on some new tires. No issues were found and car was running well. We picked it up on Friday and Saturday morning after a short drive I was parking and smoke started pouring out from behind the steering wheel. I ran inside a coffee shop for help and they asked if there were flames. I went back out and opened the car door and there was loud noise and the hood was in flames. The entire dash was melted, the hood had a hole burned in it and with the fire rescue interventions the car was a total loss. No one was injured.
- Air bags · Electrical system · Exterior lighting
The passenger airbag with seat belt icon is always indicating no one is in the seat or not buckled. The alert icon for the lighting is also on and we have replaced bulbs and still won’t work and the windows at times just randomly stops would have to unplug battery for it to reset for the windows…
The passenger airbag with seat belt icon is always indicating no one is in the seat or not buckled. The alert icon for the lighting is also on and we have replaced bulbs and still won’t work and the windows at times just randomly stops would have to unplug battery for it to reset for the windows only. I just bought this car and have registered since. Was told there was several recalls with the same issue I am experiencing. Please include my car for the proper recalls so I can have a safe reliable vehicle for my family.
- Electrical system
The contact owned a 2010 Mini Cooper S Hartop. The contact stated that while driving at 25 MPH with the two sunroofs open, the vehicle caught fire. There were flames underneath the rear of the vehicle. There were no warning lights illuminated. The contact opened the hood and threw baking soda on…
The contact owned a 2010 Mini Cooper S Hartop. The contact stated that while driving at 25 MPH with the two sunroofs open, the vehicle caught fire. There were flames underneath the rear of the vehicle. There were no warning lights illuminated. The contact opened the hood and threw baking soda on the flames but sustained burns to her hands and face, and medical attention was provided. The neighbors had used a fire extinguisher to put out the fire. The fire department was able to extinguish the fire. The airbags did not deploy. A police report was filed. There was no crash. The vehicle was previously taken to an independent mechanic who replaced the footwell control module. The vehicle was towed to a tow lot. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. Parts distribution disconnect. The failure mileage was approximately 130,000. The insurance deemed the vehicle a total loss.
- Engine
In an attempt to resolve persistent rough running engine issue, mechanic discovered that the timing chain guides failed (broke apart) and that plastic pieces of the guides migrated into the engine oil system.
- Engine · Vehicle speed control
Engine stalling Oil pan leaks Caused the engine to shut down when slowing down or sitting in traffic on highway. No warning lights prior to incidents Only right after
- Unknown or other
COPY OF COMPLAINT sent to MINI USA today 9/2/24. (Removed my personal data -name, address, email, phone number): I have been waiting since JULY 2023 for notice of a fix for this DANGEROUS ISSUE of failed FOOTWELL MODULES that can CATCH ON FIRE! How is this either legal or humane? When I call…
COPY OF COMPLAINT sent to MINI USA today 9/2/24. (Removed my personal data -name, address, email, phone number): I have been waiting since JULY 2023 for notice of a fix for this DANGEROUS ISSUE of failed FOOTWELL MODULES that can CATCH ON FIRE! How is this either legal or humane? When I call, and I call regularly, to ask about any progress made in CORRECTING THE POTENTIALLY FATAL to the driver, problem, I'm asked to BE PATIENT...that a fix is being studied but none has become available. And, oh yes, always the "FOOTWELL FIRES are very very rare"...so I suppose if I have one and I DIE my heirs should take comfort in knowing that it was very very rare? Here's the bottom line. I spoke with a service manager at MINI OF LOVELAND and I will not divulge his name because he doesn't deserve to be reprimanded or hassled. I asked him if they were replacing ANY FOOTWELL MODULES BECAUSE OF THE RECALL. I was given the same BS about "working on creating a part that will fix it". Yeah, right. But here's the jewel in this conversation: When I asked what they'd do if my Footwell module failed for MECHANICAL REASONS he told me and I BELIEVE it's a fix that should be offered to all affected owners: "He told me that when FWMODULES in my make/model/year mini, fail (not catch fire but fail as they normally do - i.e. windows won't go up or down, OR turn signals and or/headlights won't work, etc. the fix for that also address the recall issue: REPLACE THE FOOTWELL WITH THE SAME PART with these modifications to address the corrosion/fire recall: They remove the old broken module. They clean out the entire footwell removing any signs of corrosion from the leaked in water. THEY PACK the module with material that will prevent moisture from seeping in. AND then they close it back up! AT NO CHARGE TO THE OWNER> I WANT THIS FIX! I deserve this fix as do other mini owners who are affected by this recall to prevent death or severe burns or both from failed footwell modules. THANKS
- Air bags
Airbag light is deployed when passenger is sitting in seat. Module under seat is not recognizing the passenger and airbags are turned off. This is a safety concern in likeliness of an accident the passenger could be injured.
- Electrical system · Exterior lighting
The car showed a check vehicle light. Looks like a car being lifted up (red light). The windows do not move up or down, light switches do not work and the blinkers do not work. I was told by my mechanic it was the footwell module. I read there was a recall for this but my VIN wasn't on the list. Is it possible to check to see if it should have been on the list for the recall?
- Electrical system
Footwell Control Module was recalled on 12 May 2023 NHTSA Recall Number 23V337. This item has been outstanding for almost a year and I am not able to repair it yet because a manufacturer remedy is not yet available. In rare cases corrosion could result in short circuit, thermal runaway and injury. Please compel the manufacturer to develop a remedy immediately.
- Service brakes
Trailer brakes disconnected in 18k lb trailer while driving down mountain. This bulletin is the issue, should be a recall. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Engine · Exterior lighting
The FRM module on my 2010 MINI Cooper S failed in 2022. I was unable to access multiple functions on the vehicle, including interior and exterior lighting, window controls, and other operations that worked randomly during this time. I needed my car fully operational for work commuting so I had to…
The FRM module on my 2010 MINI Cooper S failed in 2022. I was unable to access multiple functions on the vehicle, including interior and exterior lighting, window controls, and other operations that worked randomly during this time. I needed my car fully operational for work commuting so I had to find a replacement FRM, which I did from an OEM MINI parts website, [XXX] . The new FRM I purchased was matched to my vehicle's VIN and installed and programmed by my local MINI shop, Detroit Tuned [XXX] ) , in Clawson, MI. The total bill for this was over $800 (I have receipts for the purchase and the install). The recall notice from MINI/BMW came in 2023, and according to their website there is still no fix, which makes no sense since I bought an OEM replacement that was fitted to my car in 2022, as I noted here. How can a part that when fails can potentially cause vehicle fires ("thermal incident", per their recall notes) NOT be replaced immediately by the manufacturer? And how can MINI/BMW say they can't get the part when an OEM version is available online? The delay in this fix is unacceptable. My OEM replacement FRM works perfectly, but I am out the $800+ I spent to get it since MINI didn't then and still doesn't have them available, "officially". So if they ever get the part and replace my fully operational replacement for free, I am still out the money I spent in 2020 to make my car operationally safe. What can I do to get a refund from MINI/BMW? Thanks. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Exterior lighting · Unknown or other
On [XXX], mileage was 47,744 I took Mini for service, and told them that the front right headlight didn't work, they replaced the light bulb and they found out that the headlight was still inoperable, and internally shorted. They didn't want to include it in the extended warranty. The mini has…
On [XXX], mileage was 47,744 I took Mini for service, and told them that the front right headlight didn't work, they replaced the light bulb and they found out that the headlight was still inoperable, and internally shorted. They didn't want to include it in the extended warranty. The mini has electrical issues (FRM). The headlight wires are damaged inside the light housing and are bare-striped even if you change the light bulb when you hit a bump the wires touch the bulb short out. So my car was under the extended warranty when I took it to Braman Motors Miami for service but they failed to correct the problem. BMW of North America extended the warranty for 10 years /156,000 miles whichever occurs first, as determined by your vehicle's service date (original service date is 3/16/2010) extending the limited warranty for the Footwell Module (FRM) This problem is a known problem by BMW / Mini they currently have open recalls on the model, series, production date, and year. but since hardly anyone files complaints to NHTSA in Fla, this problem is ongoing. [XXX], under violation of federal law (The Safety Act) dealers can't sell, lease, or deliver any vehicle until recall repairs have been performed. But they overlook the problem at the dealership when the car is in the shop for service. I was given a multi-point inspection it passed 28 of them LOL, but the first one (Operation of all light and signals, (passed)...lol So how can this test pass? When I picked up the Mini nothing was working turn signals, the front right headlight, windows, hazard lights, fog lights. However, the dealer overlooks the safety recall and wants to charge the client an additional charge to diagnose the FRM. They gave me an estimate for $1,985.38 if I had approved the work that they said the Mini needed, but nothing to do with the recall (FRM) is this how BMW handles this safety recall? They don't care to solve the problem at any level dealer or manufacturer. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C.
- Electrical system · Engine
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated while driving approximately 65 MPH, the vehicle stalled. The contact stated that she was unable to check for warning lights due to a previous failure of the instrument cluster. The contact was able to coast the vehicle over to the side of the road. The contact was unable to restart the vehicle and had the vehicle towed to the residence. The contact stated that the stall was an intermittent failure and occurred at various speeds. Additionally, the contact stated that there were various other electrical failures with the power windows. Additionally, the sunroof was unable to open or close as needed. The contact stated that the vehicle was also intermittently not able to turn off after turning the ignition key to the off position and remained running until the vehicle turned off independently. The contact drove the vehicle to a local dealer who diagnosed the vehicle and related the failure to NHTSA Campaign Number: 23V337000 (Electrical System). The failure mileage was approximately 30,000. VIN tool confirms parts not available.
- Electrical system
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the vehicle was experiencing an electrical failure. The contact stated that the…
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the vehicle was experiencing an electrical failure. The contact stated that the turn signals, the headlights, the power window switches, the gauges and other unknown components were inoperable. Additionally, the contact stated that the vehicle had locked independently. The local dealer was contacted and informed the contact that they needed to pay a fee for the repairs. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure, but no assistance was provided. The failure mileage was approximately 93,000. VIN tool confirms parts not available.
- Electrical system
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the power window switch had failed to operate as needed intermittently.…
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the power window switch had failed to operate as needed intermittently. Additionally, the contact stated that the gauges were inoperable. An unknown dealer was contacted and advised the contact to tow the vehicle to their location for a diagnostic test. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 123,000. VIN tool confirms parts not available.
- Electrical system
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact…
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact recently stated that the vehicle failed to start without warning. The manufacturer was made aware of the issue. The failure mileage was unknown. VIN tool confirms parts not available.
- Electrical system
My 2010 Mini Cooper convertible recently had an electrical failure. I lost power while driving and the power steering wouldn’t work. Once it started again the blinkers wouldn’t work and brake lights and radio worked intermittently. I took it to the mechanic and the diagnostic determined that the…
My 2010 Mini Cooper convertible recently had an electrical failure. I lost power while driving and the power steering wouldn’t work. Once it started again the blinkers wouldn’t work and brake lights and radio worked intermittently. I took it to the mechanic and the diagnostic determined that the footwell module is bad. Unfortunately this part is apparently on back order so the part cannot be ordered. The car is not safe to drive nor is a solution available. I looked up recalls on Mini coopers. This current recall shows that the footwell module has been recalled on 2010 hardtop Mini Coopers: MINI Recall 23V-xxx: Footwell Module Attachments: BMW AG is conducting a Voluntary Safety Recall (effective May 11, 2023) on certain Model Year 2007 - 2014 MINI vehicles that were produced between November 16, 2006, and June 27, 2014. (Due to several contributing factors (environmental, certain US States’ wintertime road treatment, vehicle design configuration and age), over time, the Footwell module (FRM) could become susceptible to corrosion) It doesn’t make sense that the exact year Mini in hardtop has the recall. Clearly the footwell modules are a problem in convertibles as well. The wording of the recall says that winter conditions can contribute to the problem. My convertible resided in a winter area for 10 years. I believe that the Mini Cooper convertibles should be included in the recall.
- Electrical system
Unknown. I’d just like to know how long Mini is allowed to work on a solution for the safety recall for the footwell control module that was issued last May. Given that they have known about problems with this module for years, it seems to me that they should have a solution ready to deploy by now. Thanks for your assistance.
- Electrical system
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue. The contact stated that the manufacturer had exceeded a…
The contact owns a 2010 Mini Cooper. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system
My vehicle started smelling intensely like burning plastic which filled the compartment. I brought it immediately to the repair shop. I had it towed in. It was apparent something was on fire. When I got to the repair shop (not mini) the electrical components for the interior, turn signals and…
My vehicle started smelling intensely like burning plastic which filled the compartment. I brought it immediately to the repair shop. I had it towed in. It was apparent something was on fire. When I got to the repair shop (not mini) the electrical components for the interior, turn signals and windows) had failed and smoldered. There were no warning lights. I was told that there was a recall for the Footwell Module and that this had caused the problem. I never received a letter for the recall. The car is registered in California but was first sold in New York and so it qualifies for the recall but when I look up my VIN it says no recalls. The part has failed, and they have told me they have no replacement part yet so my car is now sitting with a car cover with the windows rolled own because they cannot roll up without the Footwell Module. Mini says they have no solution. I had to buy a new car. This was not an easy expense for me as I have limited income due to a disability.
- Electrical system
The contact's son owns a 2010 Mini Cooper Hardtop. The contact stated that the windows failed to roll down, and the turn signals and the headlights were inoperable. Additionally, the check engine warning light was illuminated. The vehicle was taken to several independent mechanics, where it was…
The contact's son owns a 2010 Mini Cooper Hardtop. The contact stated that the windows failed to roll down, and the turn signals and the headlights were inoperable. Additionally, the check engine warning light was illuminated. The vehicle was taken to several independent mechanics, where it was diagnosed that the footwell control module (FRM) was severely corroded. The contact later received NHTSA Campaign Number: 23V337000 (Electrical System); however, the part to do the recall repair was not yet available. The manufacturer was notified of the failure and advised the contact to take the vehicle to the dealer for a temporary repair and she would later receive reimbursement. The local dealer was contacted, and an appointment was scheduled for temporary repair; however, the manufacturer informed the contact that they would no longer provide reimbursement for any repairs completed prior to the safety recall because the vehicle was drivable despite the safety failures. The vehicle had not yet been repaired. The failure mileage was approximately 47,000.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10245428Cavity protection applied to underside of the hood is leaking out onto the wheel arch trim and grille.
- 10244507MINI electrical systems have continued to develop over the past few years. As a result, the demand on the batteries has increased. Breakdowns due to an empty battery or problems in the vehicles electrical system can have various causes, most of which are not due to the battery itself. For this reason, a battery replacement will permanently eliminate the problem only in the rarest of cases. The energy diagnosis test module helps to localize these causes. This document covers important information for the dealer on how to handle discharged battery complaints. Without performing the energy diagnosis test plan, the root cause of a discharged battery cannot be identified. In order to properly repair the vehicle the first time, it is very important that the diagnostic test plan is performed to completion; with all results taken into consideration.
- 10206696New RDC wheel electronics will be introduced with future generation MINI models. The new wheel electronics are identified as Huf Generation 5. These new wheel electronics will need to be programmed using the new tool when replaced or when depressurized (0 psi) for more than 2 minutes.
- 10179827OC3 SEAT OCCUPANCY MAT - LIMITED WARRANTY EXTENSION TO 10 YEARS/120,000 MILES: Component-Specific Limited Warranty Extension For the above-referenced vehicles, MINI USA, a division of BMW of North America, LLC (MINI USA) is extending the limited warranty for the front passenger's OC3 seat occupancy mat (shown) to: 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10171506CLASS ACTION SETTLEMENT: N14 HIGH-PRESSURE FUEL PUMP (HDP) SERVICE BENEFIT CLASS VEHICLES: The MINI vehicle may experience a sudden engine operational failure reduced or loss of power while driving and the malfunction indicator lamp (MIL) may be illuminated along with high-pressure fuel pumprelated faults stored in the Engine Control Module (DME). PROCEDURE Perform the corresponding diagnosis/vehicle test and run the test plans to completion as applicable.
- 10162461Air Conditioning System Leak Testing. The customer complains of poor or no air conditioning cooling. After further diagnosis, the system is found to be low or empty of a refrigerant charge, but when using an electronic leak detector, no leak can be found. CAUSE: In most cases, an electronic leak detector is not sufficient for identifying small leaks in the system. Electronic leak detectors can give false alarms and can lead to an improper diagnosis of small leaks. A leak cannot be located exactly if accessibility is impaired (in the case of the expansion valve, evaporator or condenser).
- 10162460Service Action: Checking or Replacing the Door Sill Trim Strips. The door sill trim strips are deformed and/or peeling up at the corners. CAUSE: Insufficient surface preparation of the door sill.
- 10153778OC3 seat occupancy mat: limited warranty extension to 10 years/120.
- 10152680"MANUAL TRANSMISSION - STIFF DIAGONAL GEARSHIFT LEVER MOVEMENT. The customer may complain of a ""stiff diagonal shift"" (e.g., N-R, R-N, 2-3/3-2 or 4-5/5-4). Also, in some cases, gears cannot be selected, or the selector gear does not go into the neutral position. CAUSE 1. The deflection lever circlip of the gearshift mechanism is damaged or missing. 2. Possible corrosion at the gearshift mechanism (shift cables or transmission gearshift unit)"
- 10151349Bluetooth Connection Failures This Service Information bulletin supersedes SI M84 01 14 dated February 2016.. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware
- 10151347Delay in Automatic Driving Light Switching on/off. When driving out of a tunnel or exiting underground parking, the automatic driving light remains switched on for two minutes. Shut-off period varies based on detected situation. This is normal operational behavior.
- 10151060This Service Information bulletin supersedes SI M84 01 14 dated November 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: z Apple iPhones z Samsung S6 and the S6 Edge. Connectivity failure examples are: z Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. z Contact List incomplete z General connection failures z Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) z Samsung S6 and S6 Edge device firmware
- 10150985?OC3 SEAT OCCUPANCY MAT: LIMITED WARRANTY EXTENSION TO 10 YEARS/120,000 MILES. This Service Information bulletin supersedes SI 01 11 16 dated December 2016.
- 10150357?SUBJECT DWA (Anti-theft Alarm System): False Alarm Is Triggered Intermittently. When the vehicle is parked and locked (DWA active), the alarm system is triggered intermittently. One or more of the following conditions may trigger the alarm system: Sun roof in the tilted/open position, Window partially open, Excessive local noise (for example, near an airport, on a busy road, or in heavy rain) CAUSE Normal sensitivity of the interior ultrasonic sensor.
- 10150356"Discharged Battery: Energy Diagnosis Must Be Performed. MINI electrical systems and advancements in vehicle technology have resulted in an increased demand on the vehicle battery. This SI will help the dealer handle ""discharged battery"" complaints. A discharged battery can have various causes, most unrelated to the battery. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to http://www.batteryuniversity.com/parttwo-42B.htm. For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. To properly repair the vehicle the first time in the workshop, the diagnostic test plans must be performed to completion, with all results taken into consideration. The procedure below will guide the technician to properly repairing the vehicle and getting paid for a warranty claim. CAUSE Discharged battery."
- 10150347During Engine Oil Service a Small O-Ring Is Found in the Oil Filter Housing. No customer complaint has been received. During the scheduled engine oil service, the technician notices a black rubber o-ring lying on the bottom of the engine oil filter housing. The o-ring has been dislodged from the non-return valve inside the engine oil filter housing. No subsequent engine damage occurs from the dislodged o-ring. Engine oil filter housing (1) Rubber o-ring (2) The material dimensions of the rubber o-ring are not satisfactory, allowing it to become dislodged from its installation location.
- 10150309Squeaking Noise from Front Seat. A noise may be heard from the front driver's seat back when the customer applies sideways pressure during cornering. CAUSE Surface corrosion on the metal seat back frame can make a squeaking noise when rubbing against the foam rubber padding of the seat back.
- 10150308Bonnet Lock Difficult to Open or Close. The bonnet lock fails to operate correctly and is difficult to open or close. CAUSE Corrosion in the bonnet lock assembly
- 10150306"Erroneous ""Service due"" Message Though Brake Lining Thickness Sufficient. The CBS data calculated for the remaining distance of the front and/or rear brake pads does not agree with the actual brake pad thickness. The yellow brake lining service due indicator illuminates even though the pad thickness is greater than the minimum wear limit (approximately 3.7 mm); the brake wear sensor has not yet been activated (from a thickness of approx. 4.2 mm). In some cases, the red warning message may already be active. The CBS front/rear brake display is based on a mathematical calculation. Various influences are incorporated into this calculation (for example, vehicle speed, brake pressure, and rotor temperature). Due to changing driving characteristics and/or unfavorable environmental conditions, the calculated remaining distance may differ from actual pad thickness."
- 10150305Adjusting Rear Camber. Rear camber cannot be adjusted properly. CAUSE Repair instructions not followed properly
- 10150301DMTL Pump: Warranty Extension to 10 Years/120,000 Miles. On affected vehicles, the Tank Leak Diagnostic Module (DMTL) pump can fail. Some vehicles will have the Service Engine Soon lamp illuminated, but the vehicle's drivability and engine performance will not be reduced by this DMTL pump malfunction.
- 10150269Intermittent Humming or Buzzing Noise from Speedometer. When the vehicle is decelerating, an intermittent humming or buzzing noise coming from the instrument cluster may be heard when the speedometer needle is between 0 and 12 mph. Hardware error in the instrument cluster
- 10150241Incorrect Customer Relations Telephone Number Is Saved in the Vehicle. The customer is not connected to MINI Customer Relations after dialing the number displayed in the vehicle Kombi or radio. CAUSE During the Pre-Delivery Inspection (PDI), the incorrect telephone number is being written into the vehicle. INFORMATION 1. When performing the PDI test plan, it is extremely important that you select MINI if the ISID is configured for both BMW and MINI. 2. After completion of the PDI test plan, verify that the customer relations number stored in the vehicle is correct. 3. The correct customer relations phone number is 1(866) 275-6464. 4. If the number stored in the vehicle is incorrect and the correct test plan was used, contact your 3g Administrator and have him or her verify the number stored in the ISID. 5.This picture shows the correct number stored in the Combox control unit. Note: To read out telephone number:
- 10150237?N18 Engine: FC 2BF2 Rail Pressure Sensor Is Stored in DME Fault Memory. The customer states that the Service Engine Soon lamp is illuminated and the following fault is stored in the DME: FC 2BF2 Rail pressure sensor, workspace: pressure too high CAUSE A DME calibration error in the fuel pressure diagnostics results in an increased sensitivity.
- 10150205"?SI M34 01 13 November 2013 BrakesTechnical Service This Service Information bulletin supersedes SI 34 01 13 dated October 2013. designates changes to this revision SUBJECT Erroneous ""Service due"" Message Though Brake Lining Thickness Sufficient. The CBS data calculated for the remaining distance of the front and/or rear brake pads does not agree with the actual brake pad thickness. The yellow brake lining service due indicator illuminates even though the pad thickness is greater than the minimum wear limit (approximately 3.7 mm); the brake wear sensor has not yet been activated (from a thickness of approx. 4.2 mm). In some cases, the red warning message may already be active. The CBS front/rear brake display is based on a mathematical calculation. Various influences are incorporated into this calculation (for example, vehicle speed, brake pressure, and rotor temperature). Due to changing driving characteristics and/or unfavorable environmental conditions, the calculated remaining distance may differ from actual pad thickness."
- 10150203N16 Engine: FC 2D9B Knock Sensor, Signal Is Stored in the DME. Certain areas of the US experience extremely cold climate conditions during the winter months, which can cause the Service Engine Soon lamp to illuminate while the engine temperature is increasing to full operating temperature. The following fault may be stored in the DME: ??FC 2D9B Knock Sensor, Signal CAUSE Unfavorable DME knock sensor diagnostic at outside ambient temperatures below -5 C
- 10150148Basic SVS: Voice Recognition Inoperative After Programming. After programming the vehicle with ISTA/P 2.48.x, the voice recognition (Basic SVS) is inoperative. NOTE: The Basic SVS only includes voice recognition for phone functions. Error in the coding data of ISTA/P 2.48.x The voice recognition function is unintentionally deactivated.
- 10150147"CHAMP2: Stored Radio Stations Deleted After Ignition Off. After ignition off, the stored radio stations (AM/FM and Satellite radio) are no longer available in: * Menu ""PRESETS"" * Preset buttons on the head unit Hardware error in the CHAMP2 head unit"
- 10150091"DWA (Anti-theft Alarm System): False Alarm Is Triggered Intermittently. INFORMATION Parts replacement will not solve the problem if one or more of the conditions described in the situation above caused the alarm to trigger. The sensitivity of the interior ultrasonic sensor cannot be reduced. If the customer wishes to park the vehicle with the sunroof tilted, the window partially open, and/or in an area with excessive local noise, the interior sensor must be switched off by using the following procedure: Press the lock button on the remote control twice in succession. The LEDs flash in short succession for approx. 2 seconds. The interior ultrasonic sensor is switched off until the vehicle is unlocked and locked the next time. NOTE: This information can be found in the Owner's Manual in the ""Controls"" section under ""Switching off the tilt alarm sensor and interior movement detector."""
- 10150090"HAMP2: Stored Radio Stations Deleted After Ignition Off. After ignition off, the stored radio stations (AM/FM and Satellite radio) are no longer available in: * Menu ""PRESETS"" * Preset buttons on the head unit Hardware error in the CHAMP2 head unit"
- 10150046Clicking Noise from Front Axle Brakes.
- 10149623"Discharged Battery: Energy Diagnosis Must Be Performed. MINI electrical systems and advancements in vehicle technology have resulted in an increased demand on the vehicle battery. This SI will help the dealer handle ""discharged battery"" complaints. A discharged battery can have various causes, most unrelated to the battery. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to http://www.batteryuniversity.com/parttwo-42B.htm. For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. To repair the vehicle properly the first time in the workshop, the diagnostic test plans must be performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair. CAUSE Discharged battery."
- 10149621Whistling Noise from the Water Pump Area. A whistling or squealing noise is heard from the engine at idle and/or at higher engine speeds. CAUSE 1. Noise is caused by the water pump. 2. Noise is caused by the friction wheel of the belt tensioner.
- 10149508Telephone: Phonebook Does Not Transfer to the Vehicle. The telephone book does not transfer to the vehicle after the pairing process is completed. CAUSE Software error in the head unit
- 10149507Red or Blue Cap Missing from Temperature Control Wheel. The customer states the red or blue cap is missing from the temperature control wheel of the heat and air conditioning control panel.
- 10149504"MINI GP: Choice of Tire Option Agreement and Alternate Tire Retrofit. The Kumho 215/40 R17 Ecsta V700 sport tire performance optimization results in vehicle operation limitations, specifically when operated in cold climates or on wet, slushy or snow-covered roads. If your MINI JCW GP owner prefers a set of tires that better fits his/her driving style and climate, these owners can swap out the factory-original equipment (OE) Kumho 215/40 R17 Ecsta V700 sport tires for a set of the following MINI approved alternate tires: ??205/45R17 84W John Cooper Works performance run-flat tires Please refer to the attached MINI Product Planning & Strategy Bulletin M-20-0313-0012, ""MINI John Cooper Works GP Unleashed,"" for more information, including the required ""choice of tire option"" agreement form."
- 10149500Engine Oil Leak. The customer states that a small engine oil leak can be seen from the underside of the engine. CAUSE The internal sealing of the oil pump volume control solenoid valve is compromised, allowing engine oil to leak from the oil pump volume control solenoid.
- 10149469Telephone: Phonebook Does Not Transfer to the Vehicle. The telephone book does not transfer to the vehicle after the pairing process is completed. CAUSE Software error in the head unit
- 10149466Service Action: Replace Both Sun Visors. When opening the sun visor mirror cover, the pivot pins bind. The spring tension is too great and weak pivot pins can break.
- 10149464"N16 Engine: FC 2D9B Knock Sensor, Signal Is Stored in the DME. Certain areas of the US experience extremely cold climate conditions during the winter months, which can cause the Service Engine Soon lamp to illuminate while the engine temperature is increasing to full operating temperature. The following fault may be stored in the DME: FC 2D9B Knock Sensor, Signal While performing test plan B1214 M KNOCK SENSOR, the following error message will be displayed: ""An error has occurred during execution of a service program. Fault code: 61/3."" This error in the test plan will not allow diagnosis to continue. The test plan error will be repaired with ISTA/D 2.36.0. CAUSE A DME calibration error in the knock sensor diagnostics results in an increased sensitivity threshold to cold temperatures."
Every MINI Cooper model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.