2009 Toyota Venza
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Venza › 2009
These records cover every 2009 Toyota Venza. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
8 recalls name the 2009 Toyota Venza. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2009-2015 Venza vehicles. The Supplemental Restraint System (SRS) wiring may become damaged with regular use of the driver-side door.
Risk and remedy
Risk
Damaged wires may cause the air bag sensor to become inoperable, preventing the deployment of the side and curtain air bags on the driver side and increasing the risk of injury during a crash.
Remedy
Dealers will inspect and, if necessary, replace the driver-side front door wire harness, free of charge. Owner notification letters were mailed October 19, 2021. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TB01/21TA01.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2009 camry vehicles manufactured from july 1, 2008, through february 28, 2009, and model year 2009-2011 venza vehicles manufactured from october 20, 2008, through january 4, 2011. during assembly of the contact-type stop lamp switch, silicone grease may have come in contact with the surface of the switch which could…
Risk and remedy
Risk
Inoperative brake lights would not warn other drivers that the vehicle IS slowing or stopping, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 12, 2012. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2008-2010 highlander, model year 2009-2010 corolla, venza and matrix passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat. this recall IS an expansion of a campaign of 3.8 million other toyota vehicles announced…
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota will modify or replace the accelerator pedals on the subject vehicles. Floor surface modifications are also being considered and will be included for any model for which it IS deemed appropriate. Initially, dealers will be instructed on how to reshape the accelerator pedal for the repair. As replacement parts with the same shape as the modified pedal become available, they will be made available to the dealers for the repair. Customers who have had the pedal reshape remedy completed will have the opportunity to receive a new pedal if they desire, after replacement pedals become available. in addition, toyota will replace any toyota all-weather floor mat in a subject vehicle with a newly designed mat, free of charge. For those customers who have the previous design all-weather floor mat but do not need or want the newly designed all-weather floor mat, toyota will recover the previous design all-weather floor mat and reimburse its price. the safety recall began march 30, 2010. owners may contact toyota at 1-800-331-4331.
Owner complaints
173 complaints18 involved a crash3 involved a fire16 injuries1 deaths
What owners report most
Latest complaints
- Air bags · Electrical system · Seats
1) Passenger airbag isn’t measuring weight properly. Airbag safety message says airbag is off when seat is occupied. 2) Driver’s side seat heater is not working. The light registers that it is on, but it’s not. 3) Other I cannot describe
- Steering
I just bought this car and discovered that the steering system is actually unsafe; the vehicle makes noises and vibrates at the steering column.
- Service brakes
1) Brakes consistently 'softer' than normal. Sometimes require pumping the pedal to stop at all. Can be difficult to start car, brake pedal may not move at all to get starter button to light up. **Every time after sitting over night, when the car starts the pedal 'mushes' to the floor. It must be…
1) Brakes consistently 'softer' than normal. Sometimes require pumping the pedal to stop at all. Can be difficult to start car, brake pedal may not move at all to get starter button to light up. **Every time after sitting over night, when the car starts the pedal 'mushes' to the floor. It must be pumped to get any resistance. 2) Lack of reliable brakes poses real safety risk for everyone. I just had incident where I had difficulty stopping, nearly in accident. 3) One mechanic experienced lack of brakes when driving it, had to pump pedal to stop. 4) Multiple independent auto repair shops as well as local Toyota Dealer service have charged me thousands to repair, without success. 5) 6/27/23 warning light, 'check ABS', sensor unplugged by mechanic. Once master cylinder replaced, sensor reconnected. 6) I just called Toyota Corporate, was told they couldn't help, I'd have to pay to have it looked at again.
- Electrical system
While driving, the computer seemed to short out, going blank on the cars display, and all guages failed. The car kpet driving, but I lost power steering and brakes. It was difficult to control the car while getting to the side of the road. Once there, I turned the car off to see if things would…
While driving, the computer seemed to short out, going blank on the cars display, and all guages failed. The car kpet driving, but I lost power steering and brakes. It was difficult to control the car while getting to the side of the road. Once there, I turned the car off to see if things would reset. It would not. The car would not recognize that I had my foot on the brake to start the car. I eventually needed a tow, which was a stupid problem to have. the car was driveable, should be driveable, its the computer telling the car theres a problem when there isnt one. Once at the car shop the car started fine but failed to start again the next day. Now its not doing that behavior and the shop cant figure out whats going wrong. There are no codes to diagnose. What a stupid problem to have, a completely drivable vehicle, but a glitchy computer making the car unreliable. I am stunned that a modern car wont allow you to drive to a car shop, it would not start...the shop was 1.5 miles away but yet I had to pay for a tow. There have been NO other problems, so is it a ground, a short, a faulty display? theres no way to diagnose this or at least the shop is having a very difficult time with it. Are there other owners that have had this issue?
- Seats
Hello, I issue this complaint because my 2009 Venza interior started smelling like smoke. It went on for a bit thinking it may be something outside the vehicle. I then realized the smell was coming from the seat I was sitting on. I've read online about this problem and its seems this is a problem…
Hello, I issue this complaint because my 2009 Venza interior started smelling like smoke. It went on for a bit thinking it may be something outside the vehicle. I then realized the smell was coming from the seat I was sitting on. I've read online about this problem and its seems this is a problem many owners of this vehicle have experienced. It seems to me this should be a safety hazard. Thank You [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags · Engine
The contact owns a 2009 Toyota Venza. The contact stated that while driving approximately 65 MPH the vehicle suddenly hydroplaned causing the driver to loose control of the steering and the vehicle crashed into a concrete median. The contact stated that during the crash the frontend of the vehicle…
The contact owns a 2009 Toyota Venza. The contact stated that while driving approximately 65 MPH the vehicle suddenly hydroplaned causing the driver to loose control of the steering and the vehicle crashed into a concrete median. The contact stated that during the crash the frontend of the vehicle was damaged but no air bags deployed. No injuries were reported. Police were called to the scene but no report was taken. The vehicle was later driven home. The cause of the failure was not determined. The manufacturer was not contacted. The contact indicated that prior to the crash the maintenance light had remained illuminated. The failure mileage was 72,800.
- Air bags
The contact owned a 2009 Toyota Venza. The contact received notification of NHTSA Campaign Number: 21V257000 (Air Bags) and would like to be removed from the recall distribution list. The local dealer and manufacturer were not contacted.
- Air bags · Unknown or other
Water leaks and streams from along the top, driver’s side, just above the window where the felt meets and connects to the hard plastic structure labeled, “ABS Curtain Airbag”, Water, drips from the top ceiling just below the pull down mirror on the driver side. * see attached pictures I love my 2009 Venza. Please fix this problem for me. Thank you so much for any consideration given my request.
- Electrical system · Seats · Unknown or other
Dear NHTSA, I hope this message finds you well. I am writing to bring to your attention a matter of significant concern regarding water leakage in my vehicle, which I believe has the potential to compromise the safety and functionality of the car's electronic systems. I would like to submit this…
Dear NHTSA, I hope this message finds you well. I am writing to bring to your attention a matter of significant concern regarding water leakage in my vehicle, which I believe has the potential to compromise the safety and functionality of the car's electronic systems. I would like to submit this report to the National Highway Traffic Safety Administration (NHTSA) to ensure that appropriate measures are taken to address and rectify this issue promptly. During the rainy season, I have observed water leaks occurring on both sides of the front section of my vehicle. This water infiltration has raised serious concerns about the possibility of damage to the car's computer system, thereby posing a potential risk of car malfunction. The electronic components of modern vehicles, including vital control units and sensors, are susceptible to water damage. In the event of such damage, there is a heightened risk of malfunctions that could compromise the overall safety and performance of the vehicle. Furthermore, I have identified an additional water leakage issue through the panoramic roof at the backside of the car. This raises the likelihood of water seeping into the interior of the vehicle, potentially damaging interior components, electrical wiring, and compromising the structural integrity of the car. I am reaching out to the NHTSA with the intention of highlighting the severity of these issues and advocating for a comprehensive investigation into the water leakage concerns in my vehicle model. I believe that swift action is necessary to prevent any potential safety hazards that may arise from compromised electronic systems or structural damage due to water infiltration. In light of the safety implications associated with water damage to the vehicle's electronic components, I urge the NHTSA to initiate a thorough examination of this matter. Your prompt attention to this matter is crucial in ensuring the safety of drivers and passengers who may be affected by similar issues.
- Power train · Service brakes
I was at a stop sign and I was on an incline and I let the brake go to press the gas and the car started to go backwards and i almost hit the car behind me and and press the gas to go forward. Now anytime I am on an incline during a stop and if I let go the brake the car goes backwards.
- Air bags
The contact owns a 2009 Toyota Venza. The contact stated that after starting the vehicle and opening and closing the front driver’s side door, the SRS warning light illuminated and remained illuminated. The cause of the failure was not yet determined. The vehicle was previously inspected under…
The contact owns a 2009 Toyota Venza. The contact stated that after starting the vehicle and opening and closing the front driver’s side door, the SRS warning light illuminated and remained illuminated. The cause of the failure was not yet determined. The vehicle was previously inspected under NHTSA Campaign Number: 21V257000 (Air Bags) and no failure was found. The contact stated that the vehicle had recently experienced the failure listed in the recall. The manufacturer and local dealer were notified of the failure, but no assistance was provided. The failure mileage was 92,000.
- Unknown or other
My 2009 Venza requires an entire roof seal replacement to stop leaking from all sides of the roof. I was quoted $1k. There should be a recall or some portion of this cost covered by Toyota.
- Structure › Body
The sunroof/moonroof leak every time it rains. The water leaks into the front and back of the car. This is damaging the upholstery and may be causing electrical or structural (rust) damage as well.
- Electrical system · Steering · Suspension
Rack and pinion sound and sterring crazy the brakes sound similar at horn train and suspensión rare sound fuse case problems for my ligths
- Engine
The contact owns a 2009 toyota venza. The contact stated upon starting the vehicle, there was a loud rattling sound coming from the engine compartment. The contact stated no warning light was illuminated. The contact had replaced the starter however, the failure still occurred. The vehicle was then…
The contact owns a 2009 toyota venza. The contact stated upon starting the vehicle, there was a loud rattling sound coming from the engine compartment. The contact stated no warning light was illuminated. The contact had replaced the starter however, the failure still occurred. The vehicle was then taken to the local dealer and it was diagnosed with the timing camshaft needing to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The contact filed a complaint directly with the manufacturer. The failure mileage was approximately 120,000.
- Air bags
TL* the contact owns a 2009 toyota venza. The contact received notification of manufacturers recall number: 21tb01 (air bags) however, the part to do the recall repair was unavailable. The contact called autonation toyota hayward (24773 mission blvd, hayward, ca 94544) where it was confirmed that…
TL* the contact owns a 2009 toyota venza. The contact received notification of manufacturers recall number: 21tb01 (air bags) however, the part to do the recall repair was unavailable. The contact called autonation toyota hayward (24773 mission blvd, hayward, ca 94544) where it was confirmed that the part was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags · Unknown or other
Airbag sign on the dash board without no collusion. It comes off and on and the ignition coil b keeps coming up when scanned after fixing.
- Exterior lighting
The hid lights will flicker and go out leaving you in total darkness. not the bulbs because will come on again when you restart the car and then will start flickering again. there are many complaints on forums regarding this. will do it while in motion or parked. continues to happen
- Air bags · Unknown or other
When it rains I having leaking on the right and left side of sunroof near the airbags it happens every time it rains please help
- Steering
Just purchased a 2009 venza and there IS a rattle in steering column when hitting small pumps or cracks in road or turning. No pics because it seems to be a internal issue.
- Power train · Service brakes
I put my vehicle in reverse and the brakes seemed to lock, when I put it in drive it continued to back up. No matter what gear I put it in it stayed in reverse. I was blocking a lane at the mall ,u my husband tried to push it while in neutral but he couldn't budge it, it was still in reverse. I think it has a defective transmission, and it only has 40,000 miles on it. Scary and very dangerous situation.
- Steering
The steering column make loud noise and like metal contact
- Unknown or other
AWD engaged all the time and it might lock and if this happen the car will stop .this according to the dealer. *tr
- Seats
The seat heaters in the vehicle don't work like they should. Sometimes there IS a burning smell to them. The drivers side one went out completely about 2 years ago and we had it fixed now the passenger one isn't working at all. The drivers side seat heater gets pretty hot too and has to be shut off.
- Exterior lighting
While driving at night with the headlights on, the drivers side low beam headlight intermittently goes out. Usually occurs in the "auto" setting but not always. Sometimes after stopping and turning off the engine and lights, the low beam will start working but not always. Next night the lights work as designed but may go out again. Happens in city and highway driving...
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10201400TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190449OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0044-16.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
Every Toyota Venza model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.