2010 Toyota Venza
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Venza › 2010
These records cover every 2010 Toyota Venza. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2010 Toyota Venza. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2009-2015 Venza vehicles. The Supplemental Restraint System (SRS) wiring may become damaged with regular use of the driver-side door.
Risk and remedy
Risk
Damaged wires may cause the air bag sensor to become inoperable, preventing the deployment of the side and curtain air bags on the driver side and increasing the risk of injury during a crash.
Remedy
Dealers will inspect and, if necessary, replace the driver-side front door wire harness, free of charge. Owner notification letters were mailed October 19, 2021. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TB01/21TA01.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2009 camry vehicles manufactured from july 1, 2008, through february 28, 2009, and model year 2009-2011 venza vehicles manufactured from october 20, 2008, through january 4, 2011. during assembly of the contact-type stop lamp switch, silicone grease may have come in contact with the surface of the switch which could…
Risk and remedy
Risk
Inoperative brake lights would not warn other drivers that the vehicle IS slowing or stopping, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the stop lamp switch, free of charge. the safety recall began on april 12, 2012. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2008-2010 highlander, model year 2009-2010 corolla, venza and matrix passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat. this recall IS an expansion of a campaign of 3.8 million other toyota vehicles announced…
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota will modify or replace the accelerator pedals on the subject vehicles. Floor surface modifications are also being considered and will be included for any model for which it IS deemed appropriate. Initially, dealers will be instructed on how to reshape the accelerator pedal for the repair. As replacement parts with the same shape as the modified pedal become available, they will be made available to the dealers for the repair. Customers who have had the pedal reshape remedy completed will have the opportunity to receive a new pedal if they desire, after replacement pedals become available. in addition, toyota will replace any toyota all-weather floor mat in a subject vehicle with a newly designed mat, free of charge. For those customers who have the previous design all-weather floor mat but do not need or want the newly designed all-weather floor mat, toyota will recover the previous design all-weather floor mat and reimburse its price. the safety recall began march 30, 2010. owners may contact toyota at 1-800-331-4331.
Owner complaints
79 complaints10 involved a crash3 involved a fire7 injuries
What owners report most
Latest complaints
- Unknown or other
while driving, the sunroof made a loud explosion and shattered everywhere.
- Electrical system · Engine and engine cooling › Engine › Engine control module (ecu/ecm)
The contact owns a 2010 Toyota Venza. The contact stated that while the vehicle was parked and occupied, while attempting to start the vehicle, the vehicle failed to respond as intended. An independent mechanic was contacted. The vehicle was not taken to the dealer to be diagnosed; however, an…
The contact owns a 2010 Toyota Venza. The contact stated that while the vehicle was parked and occupied, while attempting to start the vehicle, the vehicle failed to respond as intended. An independent mechanic was contacted. The vehicle was not taken to the dealer to be diagnosed; however, an independent mechanic arrived at the residence to diagnose the vehicle and retrieved a fault code related to the ECM. The mechanic also informed the contact to call a locksmith regarding the key fob. The contact stated that the failure had occurred on several occasions. The engine control module and the purge valve were replaced, and the vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was unknown.
- Electrical system
The contact owns a 2010 Toyota Venza. The contact stated that while driving at 60 MPH, the air bag warning light illuminated. The contact stated that on a separate occasion, the horn failed to operate as intended. The vehicle was taken to an independent mechanic, where it was diagnosed and…
The contact owns a 2010 Toyota Venza. The contact stated that while driving at 60 MPH, the air bag warning light illuminated. The contact stated that on a separate occasion, the horn failed to operate as intended. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the failures were related. However, no cause for the failure was found. The vehicle was not repaired. The manufacturer was not contacted or notified of the failure. The failure mileage was approximately 93,000.
- Air bags · Electrical system · Unknown or other
When I open the driver's side when car running, the check SRS airbag system warning light comes on. It also comes on if I start car with door open.
- Engine
The contact submitted the complaint on behalf of her friend. The contact stated that while the contact's friend was driving, the friend heard a ticking noise and the check engine warning light illuminated. The contact's friend drove the vehicle to the intended destination. The contact's friend…
The contact submitted the complaint on behalf of her friend. The contact stated that while the contact's friend was driving, the friend heard a ticking noise and the check engine warning light illuminated. The contact's friend drove the vehicle to the intended destination. The contact's friend exited the vehicle and noticed a large amount of oil on the ground that had leaked from underneath the vehicle. The vehicle was towed to the dealer where it was diagnosed with failed oil cooler hoses. The contact's friend was informed that the oil cooler hoses needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure and a case was filed. In addition, the contact was informed that the previous unknown warranty for the failure description had expired. The failure mileage was approximately 184,000.
- Service brakes
Since I bought the Venza, the brake has not been working well, so I am trembling with fear and the risk of an accident countless times. I didn't know how to claim this, so I endured it and drove this car until now. Today, after reading an article about Fisker's break issue investigation. I decided to report it to NHTSA. Please investigate this and resolve this issue.
- Electrical system · Seats
On or around March 10, 2023, as my wife and daughter were driving the driver's side heated seat started burning/smoking. Immediately, my wife turned off the seat and returned home. I found there was an existing recall for this issue but only for the Southeast Toyota Distributors, I purchased my car…
On or around March 10, 2023, as my wife and daughter were driving the driver's side heated seat started burning/smoking. Immediately, my wife turned off the seat and returned home. I found there was an existing recall for this issue but only for the Southeast Toyota Distributors, I purchased my car in Missouri. I took the vehicle to the local dealership in Clarksville, Tennessee. Not only would they not honor the recall, but charged me $115.88 to confirm the burning of the seat. I contacted Toyota 7 times thus far and they are refusing to help because the recall only affected the Southeast Distributor group. I find this ludicrous as all the vehicles were made at the Georgetown, Kentucky plant. I simply want the remedy that Southeast Toyota Distributors gave their customers: Removal of bad heating unit, return of $115.88 charge of confirmation, and a return of the accessory charge I paid in December 2009. Thank you, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Electrical system · Seats
The heated seat on the driver side is creating a burning smell. I have read about numerous other issues with this model that have had recalls but not mine. This seat is still in tact and available for full inspection upon request. This is a major safety issue that is known about but not addressed.…
The heated seat on the driver side is creating a burning smell. I have read about numerous other issues with this model that have had recalls but not mine. This seat is still in tact and available for full inspection upon request. This is a major safety issue that is known about but not addressed. Major fire risk putting anyone inside vehicle in danger. I have a 2 year old daughter and if I didn’t have a lot of electrical and vehicle knowledge I could have easily left the heated seat on not knowing and caused a major risk for my entire family. Toyota needs to add the rest of the vehicles that have these issues into the recall. I have not taken into dealer yet just informed my wife not to use heated seat. I plan to take in soon to dealer but with a known issue it should be covered by a recall and not out of pocket. No police, insurance or manufacture have inspected yet. No warning lights on at all.
- Electrical system
The contact owns a 2010 Toyota Venza. The contact stated that while making a turn in either direction, the vehicle would lose motive power and stall. After coasting to a complete stop, the vehicle was restarted and the vehicle operated normally. The battery and battery cables were replaced however…
The contact owns a 2010 Toyota Venza. The contact stated that while making a turn in either direction, the vehicle would lose motive power and stall. After coasting to a complete stop, the vehicle was restarted and the vehicle operated normally. The battery and battery cables were replaced however, the failure persisted. The manufacturer and local dealer were not notified of the failure. The failure mileage was 100,000.
- Unknown or other · Visibility/wiper
Driving local freeway, 65 degrees and sunny, light traffic.... Loud impact sound but no cars in our immediate vicinity, nothing in the roadway. Once stopped, examined car and found the large panoramic sunroof had spontaneously exploded. Sunroof cover was in place so no glass fell into passenger…
Driving local freeway, 65 degrees and sunny, light traffic.... Loud impact sound but no cars in our immediate vicinity, nothing in the roadway. Once stopped, examined car and found the large panoramic sunroof had spontaneously exploded. Sunroof cover was in place so no glass fell into passenger compartment, thankfully. Pictures available. No inspection by dealer or insurance. No prior indications of any issues. No weather extremes at the time. No impact from any external or internal object could be found. Remaining glass in sunroof bulges upwards slightly
- Seats › Front assembly › Seat heater/cooler
The contact owns a 2010 Toyota Venza. The contact stated while driving 50-60 MPH, she became aware of a burning odor coming from the driver’s and passenger’s heated seats. There was no warning light illuminated. The contact drove the vehicle to an independent mechanic however, the vehicle was not diagnosed nor repaired. The manufacturer was notified of the failure. The failure mileage was 159,638
- Air bags › Frontal › Driver clockspring/spiral cassette
The contact owns a 2010 Toyota Venza. The contact stated that the air bag warning light was illuminated. The vehicle was taken to the local dealer where it was diagnosed that the clockspring harness needed to be replaced. The vehicle was not repaired. The vehicle was taken to an independent…
The contact owns a 2010 Toyota Venza. The contact stated that the air bag warning light was illuminated. The vehicle was taken to the local dealer where it was diagnosed that the clockspring harness needed to be replaced. The vehicle was not repaired. The vehicle was taken to an independent mechanic who informed the contact that the repair should be covered. The manufacturer was not contacted or notified of the failure. The failure mileage was approximately 42,000.
- Electrical system · Unknown or other
When coming to a faster stop, vehicle stalls entire system shuts off. Happened before when driving. Lucklily was not in a place to wreck.
- Engine
Ze2 warranty explains as a leaking engine oil cooler pipe A Brief knocking a really niceAt startup in th 1ar2.7l 4-0041-13 Cylinder engine could be caused by probable with the camshaft timing VVT gear assembly My invoice states Knocking rattling noise at start off causes problems with the…
Ze2 warranty explains as a leaking engine oil cooler pipe A Brief knocking a really niceAt startup in th 1ar2.7l 4-0041-13 Cylinder engine could be caused by probable with the camshaft timing VVT gear assembly My invoice states Knocking rattling noise at start off causes problems with the camshaft time in a gear assembly was repaired February 15 2021 B system warning light is on. Test for stored codes. Misc p0138: tech found internal electrical failures in rear O2 sensor and AF sensor also found internal failures in cam gears replaced all parts .$2168.77 (miles122919)Then it was also done on Oct 30 2018 $1337.73(miles 104725)
- Engine
Oil hole to close to heat that was made out of rubber. New part purchase made out of metal
- Unknown or other
Panoramic roof leaking
- Visibility › Sun/moon roof assembly
2010 toyota venza. Consumer writes in regards to loud cracking and popping sounds in roof. *Ld *js
- Electrical system · Structure › Body · Unknown or other
Water leak from panoramic sunroof when it rains. Side pillar posts. have read several reviews including: shorted out the power window controls, owners had to dismantled moonroof on their own to add sealant or glue. this should be toyota's responsibility as a factory issue. dealers are not taking…
Water leak from panoramic sunroof when it rains. Side pillar posts. have read several reviews including: shorted out the power window controls, owners had to dismantled moonroof on their own to add sealant or glue. this should be toyota's responsibility as a factory issue. dealers are not taking responsibility for it. issue has been going on for about 2YRS but I just found out I could make complaint here. please assist. *tr
- Seats · Steering
There IS a rattle in the steering column when turning it on uneven roads. Also, the drivers seat smells like it's burning when the seat heater IS on.
- Vehicle speed control › Accelerator pedal
TL* the contact owns a 2010 toyota venza. While the contact's wife was driving through a drive thru car wash, the accelerator pedal became stuck and the vehicle crashed into a wall. There were no injuries and a police report was not filed. The bumper, radiator, battery, and hood were damaged. The…
TL* the contact owns a 2010 toyota venza. While the contact's wife was driving through a drive thru car wash, the accelerator pedal became stuck and the vehicle crashed into a wall. There were no injuries and a police report was not filed. The bumper, radiator, battery, and hood were damaged. The internal damage could not be determined because the hood would not open. The insurance company was contacted and stated that they would call the contact back. The dealer and manufacturer were not notified. The air bags did not deploy. The distance of the vehicle's impact to the wall was approximately 15 to 20 feet. The cause of the failure was not determined. The vin was unknown. The failure mileage was 110,000.
- Unknown or other
I am having sleepless nights and so are my neighbors and it IS very annoying for my co-workers and the maintenance personnel in our parking garage of 1000 plus cars, to have to deal with my toyota venza 2010's alarm system to keep going off even when no one has touched the panic button or alarm.…
I am having sleepless nights and so are my neighbors and it IS very annoying for my co-workers and the maintenance personnel in our parking garage of 1000 plus cars, to have to deal with my toyota venza 2010's alarm system to keep going off even when no one has touched the panic button or alarm. There IS no breeze, movement nor animals around my car and it goes off day and night. I have to constantly wake up and press my alarm off to get the car to stop. This IS not normal. I am not sure how I could keep paying a car note on a car that does this and how this IS my fault or that of any environmental factors. It IS a mechanical issue and should become a recalled item that IS fixed by toyota. You folks need to get this recalled. I am not the only person complaining about this major inconvenience, I have seen 1000s of complaints on it. I have taken the car to the mechanic and they have been unable to fix it. They say its a manufacturer issue.
- Electronic stability control (esc) · Unknown or other
Upon startup and in movement, warning dash lights come on. indicating check engine and traction control, simultaneously and remain on. Return to authorized dealer, diagnostic complete. 02 sensor bank 1&2 corrected. Problem has returned.
- Electrical system
Las luces largas de los focos delanteros dejaron de funcionar . SE me informo que lo que sucedio ES que el injuction block esta defectuoso. Me persone a un auto parts de toyota y me informaron que son muchos los casos como mi asunto, que ES el mal de esas guaguas.
- Seats
Passenger side seat heater stopped working. Went to atlanta toyota on 12/9/15 and had seat inspected, report stated heating assembly failed and was quoted $555 for repair. An associate informed me of a recall off the heating elements for the seats, but I had to wait for my vehicle to be included.…
Passenger side seat heater stopped working. Went to atlanta toyota on 12/9/15 and had seat inspected, report stated heating assembly failed and was quoted $555 for repair. An associate informed me of a recall off the heating elements for the seats, but I had to wait for my vehicle to be included. It IS 6/11/2018 and my vin IS still excluded from the recalls for this safety issue. I contacted toyota directly today and they stated there are no recalls and have never been any recalls on my vehicle. Theu only stated they would document my issue (which has been reported before). I requested a case number for my complaint #1806110811. The recalls for this fire hazard on the 2009-2010 toyota venza are 14v74300 11/19/14 and 16v39600 6/2/16. I am requesting that all toyota venzas be included in this safety recall.
- Electrical system · Steering · Wheels
The electrical in my car flickers off and on the dome lights my headlights my license plate lights flicker off and on all the time now my driver visor light will not come on when I am driving in motion I can hear sometimes they squeaking noise sometimes I grinding noise and I feel like my car IS…
The electrical in my car flickers off and on the dome lights my headlights my license plate lights flicker off and on all the time now my driver visor light will not come on when I am driving in motion I can hear sometimes they squeaking noise sometimes I grinding noise and I feel like my car IS going all over the place my tires are being worn out way more than they should I was told my struts were leaking and then I was told I would they were not I don't know but at times I do not feel safe driving in this car and for some reason I have to keep changing my brakes almost every 5 months 6 months or so they need to be checked because my brakes will feel like they are going out but I do have brake pads on them still but in order for my car not to make certain noises or drive sometimes a certain way I need to put brand new pads on even though I have new pads on already
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10201400TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190450OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0012-21.
Every Toyota Venza model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.