2007 BMW 328I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2007 BMW 328I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2007 BMW 328I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy
Dealers will inspect and replace the driver's air bag module as necessary, free of charge. Owner notification letters were mailed August 30, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk and remedy
Risk
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.
Risk and remedy
Risk
Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Remedy
BMW will notify owners, and dealers will replace the wiring and electrical connectors, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America LLC (BMW) is recalling certain model year 2006 325i, 325xi, 330i, 330xi sedans and 325xi sports wagons, model year 2007 328i, 328xi, 335i, 335xi sedans and 328i and 328xi sports wagons, model year 2006-2007 525i, 525xi, 530i, 530xi, 550i sedans and 530xi sports wagons, model year 2006 760i sedans, model year 2006-2007 750i, 750Li, and…
Risk and remedy
Risk
Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
Remedy
BMW will notify owners with an interim notification letter in January 2014 since parts are not currently available. When parts are available, BMW sent a second letter in August and dealers will repair the occupant detection mat to eliminate the possibility that it may crack, free of charge. Additionally, owners of model year 2006-2007 3 Series with standard seats, 5 Series with comfort seats, and Z4 models, will receive an extended warranty on their front passenger seat occupant detection mat. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through…
Risk and remedy
Risk
If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Owner complaints
399 complaints11 involved a crash28 involved a fire14 injuries
What owners report most
Latest complaints
- Electrical system
I am filing this complaint regarding my 2007 BMW 328i and my recent experience attempting to have an active safety recall addressed by an authorized BMW dealership. My vehicle has an active safety recall involving the vehicle’s power supply system/positive battery cable connection. The vehicle has…
I am filing this complaint regarding my 2007 BMW 328i and my recent experience attempting to have an active safety recall addressed by an authorized BMW dealership. My vehicle has an active safety recall involving the vehicle’s power supply system/positive battery cable connection. The vehicle has also been experiencing intermittent electrical power issues, which makes addressing this recall particularly important from a safety standpoint. I brought my vehicle to the dealership specifically to have the recall inspected and repaired. However, I was informed that the dealership would not replace the recall-related part because the vehicle has a salvage title. I am concerned because this is a safety-related recall, and the dealership’s refusal prevented me from having the recalled component properly inspected and, if necessary, replaced. The vehicle is also experiencing electrical symptoms involving the same general power supply system associated with the recall. I am requesting that NHTSA review this matter and determine whether the dealership’s refusal to perform or properly address the safety recall because of the vehicle’s salvage title is consistent with BMW’s recall obligations and applicable federal safety requirements. I am also requesting guidance regarding what steps I should take to have the recall properly inspected and completed by an authorized BMW dealer. My primary concern is safety. I want the recalled component and the vehicle’s power supply system properly evaluated to determine whether the vehicle presents an ongoing safety risk. VEHICLE INFORMATION Year: 2007 Make: BMW Model: 328i TITLE STATUS: Salvage RECALL INFORMATION Recall: Power Supply/Positive Battery Cable System DEALERSHIP INFORMATION Dealership: BMW of Birmingham Location: Irondale, Alabama ISSUE REPORTED The dealership refused to replace the recall-related component because the vehicle has a salvage title. I can provide documentation of the recall and dealership communications
- Unknown or other
I took my car to Riverside bmw dealership. They said they submitted the cleared recall paperwork but it’s been 44days since and my recall still isn’t cleared from the system
- Engine and engine cooling
The contact owned a 2007 BMW 328i. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The contact stated that while driving approximately 60 MPH, there was whitish grey smoke coming from the vehicle. The vehicle was taken to the residence where it was…
The contact owned a 2007 BMW 328i. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The contact stated that while driving approximately 60 MPH, there was whitish grey smoke coming from the vehicle. The vehicle was taken to the residence where it was parked, and there was smoke coming from under the hood. The contact pushed the vehicle away from the residence and from structures and became aware that there were heat bubbles on the hood of the vehicle and called 9-1-1. The Police and Fire Department arrived, and the firemen axed the hood and extinguished the fire under the hood. The fire department was able to extinguish the fire. The Police and Fire Department filed reports; however, the reports were not available. There were no injuries. The vehicle was towed to a tow lot. The manufacturer was not notified of the failure. The failure mileage was approximately 198,000.
- Electrical system · Power train
Hello I contacted bmw about a recall on my vehicle and made an appointment the gentleman I spoke with at first did the whole recall appointment. He wasn’t there on the day of and the other technician refused to conduct the recall repair and very rudely said to me you either pay $500 for diagnosing…
Hello I contacted bmw about a recall on my vehicle and made an appointment the gentleman I spoke with at first did the whole recall appointment. He wasn’t there on the day of and the other technician refused to conduct the recall repair and very rudely said to me you either pay $500 for diagnosing or you come pick up your car now otherwise I will charge you $200 daily storage he said the car didn’t start I told him yes of course is due to that recall which caused a meltdown leading to smoke coming in from the vents cutting all power to car . This guy refused to understand the situation and was really rude he said I have til the end of today to pick up the car and he disregard my appointment and refuse to fix it. So I call my AAA tow truck to pick up my vehicle and the refused to release it so now my car isn’t getting fixed and it’s being hold hostage
- Electrical system
The contact owns a 2007 BMW 328I. The contact stated that upon starting the vehicle, there was an abnormally strong burning odor coming from the vehicle. Additionally, the blower motor became inoperable. There was no warning light illuminated. The contact stated that he had personally replaced the…
The contact owns a 2007 BMW 328I. The contact stated that upon starting the vehicle, there was an abnormally strong burning odor coming from the vehicle. Additionally, the blower motor became inoperable. There was no warning light illuminated. The contact stated that he had personally replaced the blower motor. The contact stated that while servicing the vehicle, he noticed that the wiring underneath the footwell had melted. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 17V676000 (Electrical System); however, the recall repair failed to prevent the failure. The dealer was contacted and advised the contact that he had to pay for the diagnostic test and the repairs. The vehicle was not yet diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 173,000.
- Unknown or other
We where sitting in our car me my wife and our 6 month old son it was running and out of no where lots of smoke started coming out from under the hood I didn't know what it was so I turned the car off got my wife and son out and away from the car then I opened the hood and soon as I did all I could…
We where sitting in our car me my wife and our 6 month old son it was running and out of no where lots of smoke started coming out from under the hood I didn't know what it was so I turned the car off got my wife and son out and away from the car then I opened the hood and soon as I did all I could see was flames I ran and got water and started throwing it on the fire till it was out this was the only car we had now it is ruined we missed our sons doctors appointment and I have not been able to make it to work
- Air bags
passenger restraint malfunction warning light has been on. It is a common problem with many BMW's and they did not issue a recall prior to 2009 models. The repair is quite costly and it seems to be a computer error that is not actually an issue at all
- Tires › Sidewall · Tires › Tread/belt
Sidewall blow out and tire tread separation. Continental 205/55R16.
- Air bags · Seat belts · Seats
Front Seat Passenger Side Seatbelt warning indicator activates when no person is in passenger seat. Airbag warning light illuminates even when there is a passenger in the seat. I see numerous complaints about the same/similar issues in your data base, but seemingly no resolution or recall. My…
Front Seat Passenger Side Seatbelt warning indicator activates when no person is in passenger seat. Airbag warning light illuminates even when there is a passenger in the seat. I see numerous complaints about the same/similar issues in your data base, but seemingly no resolution or recall. My car is a convertible. I note from other complaints on your website that a related recall was initiated for my year make model but it did not apply to convertible version of this model. That is irresponsible and unacceptable.
- Electrical system
Defective Professional Grade Radio. When you first start the vehicle the radio works fine. After driving the vehicle 30 minutes or so the digital display on the radio goes blank ( Cannot read the display). The radio is connected to the digital display underneath the speed odometer. So it’s…
Defective Professional Grade Radio. When you first start the vehicle the radio works fine. After driving the vehicle 30 minutes or so the digital display on the radio goes blank ( Cannot read the display). The radio is connected to the digital display underneath the speed odometer. So it’s untelling what all might happen if the radio issue is not resolved. It could Possibly cause the vehicle to not start or short out and cause a fire. Me personally, I would just recall it and upgrade it to digital Navi. System.(radio is included). This days time everything is digital.
- Exterior lighting
HEADLIGHTS. FIRE HAZARD BECAUSE OF BRITTLE AND BARE WIRING INSIDE OF HEADLIGHT HOUSING. Confirmation is as simple as looking inside of headlight to change a bulb. The vehicle does not set any codes to make you aware of wiring issue.
- Electrical system · Engine
we have taken the car to the dealership for the recall and was told they do not have the parts and also wouldn't know how to fix it. every time the car turns on, you can smell the melting of the plastic. it smells bad and am worried every time im driving about a fire. before the recall came out, we had asked about the unknown smell of something burning and was told it was "normal"
- Fuel system, gasoline
The contact owns a 2007 BMW 328I. The contact stated that while driving at an undisclosed speed, he smelled fuel within the interior of the vehicle and observed low RPM's before the vehicle lost motive power and stalled. The contact was able to coast to the shoulder of the road, where, after visual…
The contact owns a 2007 BMW 328I. The contact stated that while driving at an undisclosed speed, he smelled fuel within the interior of the vehicle and observed low RPM's before the vehicle lost motive power and stalled. The contact was able to coast to the shoulder of the road, where, after visual inspection, he observed fuel leaking within the rear driver's side wheel well. The check engine warning light was illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was towed to the residence. The vehicle was not repaired. The manufacturer was notified of the failure but was unable to help. The failure mileage was 165,000.
- Electrical system · Engine and engine cooling
The contact owns a 2007 BMW 328i. The contact stated that while driving approximately 50- 55 mph, the vehicle caught fire. There was an abnormal burning odor detected. There were no warning lights illuminated. The driver was able to use her fire extinguisher and extinguish the fire. There were no…
The contact owns a 2007 BMW 328i. The contact stated that while driving approximately 50- 55 mph, the vehicle caught fire. There was an abnormal burning odor detected. There were no warning lights illuminated. The driver was able to use her fire extinguisher and extinguish the fire. There were no reported injuries, police reports filed, or air bag deployments. The vehicle was towed to an independent mechanic, who informed her that the battery pack wiring had melted. and the PCV and wiring needed to be repaired. The vehicle was taken to the local dealer, where an unknown diagnosis regarding the electrical panel was provided. The vehicle was repaired. The manufacturer was not notified. The failure mileage was approximately 149, 000.
- Engine and engine cooling
The contact owns a 2007 BMW 328i. The contact had received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The contact stated that after parking and turning off the vehicle, she remained inside, and there was a burning smell. The contact stated that smoke was coming…
The contact owns a 2007 BMW 328i. The contact had received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The contact stated that after parking and turning off the vehicle, she remained inside, and there was a burning smell. The contact stated that smoke was coming from the passenger floorboard and that after exiting the vehicle, there was also smoke coming from the hood, and after opening it, there were flames seen. The contact stated that she extinguished the flames with a garden hose and did not require calling the fire department. The contact made a local dealer aware of the failure and recall and scheduled a recall repair appointment. The vehicle was then taken to the dealer; however, the mechanic denied completing the recall remedy after the fire. The vehicle had not yet been diagnosed or repaired. The manufacturer was made aware, and a case was opened. The approximate failure mileage was 140,000.
- Fuel/propulsion system
Unknown, BMW had to replace an eccentric shaft sensor, valve cover fuel pump sensing unit after check engine light appeared. The repair was significant and appeared to be a huge safety hazard from my understanding. Please look into this matter. Thank you
- Engine and engine cooling
The contact owns a 2007 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that there was an abnormal burning plastic odor after starting the vehicle. The contact…
The contact owns a 2007 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that there was an abnormal burning plastic odor after starting the vehicle. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was 100,000. Parts distribution disconnect.
- Engine
The contact owns a 2007 BMW 328I. The contact stated that while driving at various speeds, there was a burning odor coming from the vehicle. The contact stated that the check engine warning light was illuminated. The contact made a local dealer aware of the failure; however, the vehicle was not yet…
The contact owns a 2007 BMW 328I. The contact stated that while driving at various speeds, there was a burning odor coming from the vehicle. The contact stated that the check engine warning light was illuminated. The contact made a local dealer aware of the failure; however, the vehicle was not yet taken to be diagnosed or repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 128,000.
- Engine and engine cooling › Cooling system › Pump · Engine and engine cooling › Exhaust system › Emission control › Crankcase (pcv)
The contact owns a 2007 BMW 328I. The contact stated that she smelled an abnormal odor inside her vehicle, and the thermostat warning light was illuminated. The vehicle was taken to an independent mechanic, where the water pump was replaced; however, the failure recurred. The vehicle was not…
The contact owns a 2007 BMW 328I. The contact stated that she smelled an abnormal odor inside her vehicle, and the thermostat warning light was illuminated. The vehicle was taken to an independent mechanic, where the water pump was replaced; however, the failure recurred. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was unknown.
- Engine and engine cooling
The contact owns a 2007 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2007 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system
The wiring insulation is dry cracked everywhere in both headlights exposing a lot of the wires in many places. It can cause a short.
- Engine and engine cooling
The contact owns a 2007 BMW 328I. The contact received notification of the NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2007 BMW 328I. The contact received notification of the NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that she had started to smell a burning odor throughout the vehicle. The vehicle was not diagnosed or repaired. The manufacturer was notified of the issue and the contact was informed that parts were not yet available. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2007 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2007 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system · Engine · Structure › Body
My vehicle caught on fire while parked and unoccupied. Fire started in the engine compartment.
- Engine and engine cooling
The contact owns a 2007 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine, Engine Cooling) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not available. The contact stated that…
The contact owns a 2007 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine, Engine Cooling) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced the failure. VIN tool confirms parts not available.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10211864The footwell module (FRM) cannot be encoded after replacement.
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
- 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10170574SERVICE ACTION: N54T ENGINE - INSPECT AND REPLACE INJECTOR(S). The piezo-type fuel injectors may cause a rough running at start-up or rough running while at idle.
- 10162434Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10162431"Erroneous CC Message "Remote control! Do not switch off the engine" is Displayed. An erroneous CC message, "Remote control!" " Do not switch off the engine" is displayed in the Central Information Display (CID). The engine can still be started, even with the CC message displayed. CAUSE: Car Access System (CAS) software error"
- 10162426Trunk Lid Intermittently Does Not Open or Latch. Intermittently the trunk lid does not pop open when using the remote, or latch when closing. If the vehicle is driven and the trunk is not closed fully, a Check Control message will be displayed in the instrument cluster. CAUSE: The trunk lid is out of tolerance. When opening or closing the trunk lid, the latch rubs against the striker because of insufficient clearance.
- 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
- 10162406Power Mirrors and/or Windows are Inoperative. The power windows and/or power mirrors are inoperative. The LED on the headlight switch is flashing. There is a check control message for Windows/Mirrors/ Headlights. There may also be a complaint of water in one or both headlights. One of the following fault codes may be stored: * 9CBD - Communication with stepper motor box left defective * 9CBE - Communication with stepper motor box right defective * 9CC1 - Communication with mirror driver side defective * 9CC2 - Communication with mirror passenger side defective/Right Stepper Motor Controller (SMC) signaling fault * 9CCF - Communication with LIN control defective Left and/or right headlight housing cover is not properly fitted allowing water ingress into the Stepper Motor Controller (SMC) connector. CAUSE: Left and/or right headlight housing cover is not properly fitted allowing water ingress into the Stepper Motor Controller (SMC) connector.
- 10162404"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Follow the diagnosis test plan using the latest ISTA version. In Information Search, select the "Function Structure"" tab. Select Body, Mirror, Door mirror, Driver's or passenger side, Exterior Mirror Malfunction, and then press "Start Search". Select test plan ""AM5102_00010".
- 10162395N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
- 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10154816In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
- 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
- 10152314Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM door lock status due to voltage variations
- 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
- 10151323ELV Does Not Release. The customer complains of a no-crank, no-start situation. The condition may be intermittent. The ELV (Electric Steering Lock) warning is shown in the Instrument Cluster.
- 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151255ISTA/P Cannot Program an E-Series N55 Replacement DME. ISTA/P fails when attempting to program a replacement DME (MEVD172) on BN2000 E-Series vehicles with the Continental HPP. Part number: 12 14 8 618 483. DME logistic error between the replacement hardware and basic software prevents correct programming with ISTA/P.
- 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151170N51 Engine: Service Engine Soon Lamp Illuminated - Loss of Power and Various Faults Stored in the DME. The customer complains that the Service Engine Soon lamp is illuminated. The vehicle has lost power; the engine cranks but will not start; and various faults are stored in the DME for engine misfire and/or mixture adaptations. CAUSE The vehicle has lost fuel system delivery pressure due to a loose or split fuel line inside the fuel tank. The failure is related to an unfavorable stacking of tolerances between the rubber fuel hose and the plastic regulator nipple or deterioration of the rubber hose construction material.
- 10151119SI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
- 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
- 10151079SI B13 03 15 February 2016 Fuel Systems Technical Service This Service Information bulletin supersedes SI B13 03 15 dated March 2015 and replaces SI B13 04 13 dated March 2014. SUBJECT N20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error. The current version of the ETK incorporates multiple part number errors for the Bosch type injectors. Ordering the injectors by VIN number or manual identification in ETK may result in an incorrect part number.
- 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10151028"This Service Information bulletin supersedes SI B65 69 06 dated June 2008. designates changes to this revision SUBJECT Airbag Warning Lamp Illuminated, FC 93EB or FC 55 . The red airbag warning lamp (AWL) in the instrument cluster is illuminated and a fault code for ""Emergency call function..."" is stored in the MRS5 (Multiple Restraint System) control module. The fault code is FC 93EB for the E90 and E91 or FC 55 for the X3. The fault occurs regardless of whether the vehicle has a TCU (Telematics Control Unit) or not. Internal varistor fault within the MRS control module."
- 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
- 10150389Service Action: CIC - Install Navigation Road Map Database 2013. The Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
- 10150381Junction Box Pin Assignment Change. When replacing the Junction Box (fuse box) using P/N 61 14 6 978 270 or later, note that various pin assignments have changed. The following additional work procedure is necessary to properly perform this repair.
- 10150365"N51, N52K and N52T: Idle Fluctuation During Engine Warm-up Phase. After a cold engine start, the idle speed may be unstable or start fluctuating up and down slightly while the vehicle is stopped. On vehicles with automatic transmissions, roughness or shuddering may be felt during this warm-up period when diving away slowly in ""D"" or in ""R"" without depressing the accelerator pedal. No relevant errors are stored in the DME fault code memory, and these symptoms are no longer present once the engine is at operating temperature (> 90C). Unfavorable DME software"
- 10150334"Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD). Note: The INITIAL enabling code ""FSC CIC map, N. America 2013 INITIAL"" is necessary to start the installation process and to activate the road map database."
- 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
- 10150329Intermittently the trunk lid does not pop open when using the remote, or latch when closing. If the vehicle is driven and the trunk is not closed fully, a Check Control message will be displayed in the instrument cluster. CAUSE The trunk lid is out of tolerance. When opening or closing the trunk lid, the latch rubs against the striker because of insufficient clearance.
- 10150324?SI B51 15 08 Body Equipment October 2012 Technical Service. This Service Information bulletin supersedes SI B51 15 08 dated July 2008. designates changes to this revision SUBJECT Rear Window False Anti-trap Activation. INFORMATION The anti-trap protection feature may be activated when no obstruction is present. This may occur at either one or both of the rear windows. The root cause of the false anti-trap activation may be difficult to determine. The attached diagnosis flowchart has been developed to assist with determining the actual root cause of the failure as well as to help prevent unnecessary part replacements. The root cause is typically either an issue with the window system, or an electrical/software issue. The diagnosis flowchart will help ensure that repairs are only carried out for the system that is most likely at fault. Refer to B511508_Attachment. PARTS INFORMATION Refer to the Electronic Parts Catalog (EPC) for the appropriate parts noted in the diagnostic flowchart. WARRANTY INFORMATION Not applicable.
- 10150265Intermittently Stored FM Radio Stations Default to FM 87.7. Intermittently, the stored FM radio stations default to FM 87.7 after vehicle start-up. CAUSE 1. Low battery voltage or voltage drop at the head unit 2. Radio station preset contains FM 87.7 3. Remote key memory not set correctly or the setting is lost
Every BMW 328I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.