2013 BMW 328I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2013 BMW 328I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2013 BMW 328I. Newest first.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical…
Risk and remedy
Risk
An electrical short increases the risk of a fire.
Remedy
Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW North America, LLC (BMW) is recalling certain model year 2012-2015 320i, 320xi, 328i, 328xi, 335i, 335xi, and ActiveHybrid3 vehicles manufactured October 20, 2011, to June 22, 2015, 2014-2015 328xi Sports Wagon vehicles manufactured March 21, 2013, to March 17, 2015, 2014-2015 328d, 328xd vehicles manufactured June 28, 2013, to April 21, 2015, and…
Risk and remedy
Risk
If the side marker lights do not illuminate, the vehicle may be less visible at night, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will upload revised software to correct the issue, free of charge. The recall began on October 7, 2015. Owners may contact BMW customer service at 1-800-525-7417 or by email at CustomerRelations@bmwusa.com.
BMW of North America LLC (BMW) is recalling certain model year 2014 BMW 328i xDrive Sports Wagon, 2012-2014 BMW 320i Sedan, 328i Sedan, 320i xDrive Sedan, 328i xDrive Sedan, 2012-2013 BMW 528i Sedan, 528i xDrive Sedan, 2013-2014 BMW X1 sDrive28i, X1 xDrive28i Sports Activity Vehicle, 2013-2014 BMW X3 xDrive28i Sports Activity Vehicle, 2012-2014 BMW Z4…
Risk and remedy
Risk
A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will install a locking ring in the camshaft to retain the camshaft seal disk in the proper location, free of charge. The recall began on December 2, 2014. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America LLC (BMW) is recalling certain model year 2012-2014 320i, 328i, 320i xDrive, and 328i xDrive sedans; model year 2014 328i xDrive Sports Wagons; model year 2012-2013 528i and 528i xDrive sedans, model year 2013-2014 X1 sDrive28i and X1 xDrive28i vehicles and model year 2012-2014 Z4 sDrive28i roadsters. Due to insufficient lubrication…
Risk and remedy
Risk
A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will modify the vehicles to prevent insufficient vacuum pump lubrication, free of charge. The safety recall began on January 31, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Owner complaints
257 complaints24 involved a crash8 involved a fire17 injuries
What owners report most
Latest complaints
- Service brakes
I was at the John Wayne Airport, going from the arrivals to departures. I had a lot of stop and go traffic, and when I was going down toward the bottom, my brakes failed. I kept pumping them to try and stop but they were not working. I saw an empty area where the car rental returns were and I was…
I was at the John Wayne Airport, going from the arrivals to departures. I had a lot of stop and go traffic, and when I was going down toward the bottom, my brakes failed. I kept pumping them to try and stop but they were not working. I saw an empty area where the car rental returns were and I was able to pull over and come to a stop. I was very lucky that there was a spot to pull over, I used the emergency brake as well when I finally came to a stop. I want the brake system to be looked into. After seeing the other complaints regarding the exact situation, I do not understand why this was not looked into before I got this car.
- Air bags · Power train
The contact owns a 2013 BMW 328I. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The drivetrain and passenger’s side air bag warning lights were illuminated. The vehicle was driven to the…
The contact owns a 2013 BMW 328I. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The drivetrain and passenger’s side air bag warning lights were illuminated. The vehicle was driven to the shoulder of the road. The contact turned off and restarted the vehicle; however, the failure reoccurred. The contact stated that the vehicle failed to accelerate above 25 MPH and the vehicle was shaking erratically. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 174,775.
- Engine · Power train
2013 BMW 328i, N20 engine. Timing chain guide assembly and oil pump drive chain failed catastrophically. Vehicle is available for inspection, however the authorized BMW dealership has already made clear they will accept no responsibility, and I would bear the expense of towing it two hours to their…
2013 BMW 328i, N20 engine. Timing chain guide assembly and oil pump drive chain failed catastrophically. Vehicle is available for inspection, however the authorized BMW dealership has already made clear they will accept no responsibility, and I would bear the expense of towing it two hours to their facility. The failure is a known issue with a class action case, but BMW took no responsibility, and falsified information stating the vehicle showed no signs of an issue when I brought my vehicle in for inspection. Eighteen months before failure, steam came from the engine compartment on a humid day, later connected to the water pump electrical connector recall. Following this, the vehicle ran consistently hotter than normal and lost noticeable power. Twelve months before failure, an intermittent oil pressure warning began triggering under load at highway speeds, particularly on inclines above 70mph. I brought the vehicle to Sandia BMW in Albuquerque, NM and reported all symptoms when I was contacted by them for the recall. The service advisor falsely claimed elevated operating temperature was optimal, suspected a faulty sensor, and returned the vehicle without offering further diagnosis or making me aware of the impending issue, all classic signs of the engine faults. Eight weeks later, the oil pressure light activated on a highway, followed immediately by a drivetrain malfunction warning, a violent grinding sound, and complete loss of power. The vehicle was towed and has not restarted since. I contacted BMW of North America's recall line. A case was opened and an advocate stated BMW would accept no responsibility because the class action was closed and I'mpast 70K miles. I raised the dealership's direct culpability. The advocate stated a dealership representative would contact me. No call was ever received. This failure is consistent with BMW Service Bulletin SI B11 03 17. A engine safety recall is warranted regardless of age to protect the public.
- Fuel system, gasoline
The contact owns a 2013 BMW 328I. The contact stated that while driving at an undisclosed speed, an unknown warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed with a hole on top of the fuel tank. The contact was informed that the fuel tank needed to be replaced.…
The contact owns a 2013 BMW 328I. The contact stated that while driving at an undisclosed speed, an unknown warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed with a hole on top of the fuel tank. The contact was informed that the fuel tank needed to be replaced. In addition, the contact was informed that the failure was a known failure with the vehicle. The contact stated that the manufacturer had previously initiated an extended warranty coverage for similar vehicles; however, the repair was not covered under the Extended Warranty. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 56,910.
- Electrical system · Engine and engine cooling
The contact owns a 2013 BMW 328i. The contact stated that while driving at an undisclosed speed, the engine overheated, and multiple warning lights were illuminated. The contact then stated that the vehicle lost power and would not restart. The vehicle was towed to an independent mechanic, where it…
The contact owns a 2013 BMW 328i. The contact stated that while driving at an undisclosed speed, the engine overheated, and multiple warning lights were illuminated. The contact then stated that the vehicle lost power and would not restart. The vehicle was towed to an independent mechanic, where it was diagnosed that the water pump and electrical plug connector had failed and needed to be replaced. The vehicle was repaired. The contact later received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System). The vehicle was taken to the dealer, where it was not diagnosed or repaired. The contact requested reimbursement for the cost of the repair that was performed prior to the safety recall, but the dealer informed the contact that the reimbursement claim was denied. The manufacturer was made aware of the failure, and the manufacturer also denied the reimbursement claim. The approximate failure mileage was 89,565.
- Electrical system · Engine and engine cooling
See attached document for complaint. I am writing in reference to the recall on my 2013 BMW-328xi. The vin number is. The recall is for the water pump electrical connector. My water pump failed May 2024. I went to an independent repair service center that specializes in BMW repair, which in turn…
See attached document for complaint. I am writing in reference to the recall on my 2013 BMW-328xi. The vin number is. The recall is for the water pump electrical connector. My water pump failed May 2024. I went to an independent repair service center that specializes in BMW repair, which in turn was the closest service center to where the vehicle broke down. I paid out of pocket for the repair. Now there is a recall on this part, I would appreciate reimbursement for the charges. I am enclosing a copy of the invoice.
- Air bags · Seat belts · Seats
Passenger Restraint system malfunction for the front passenger seat. This may not trigger the airbag for a passenger sitting in the front if a collision occurs and can seriously injure someone. This problem appears to be very common with BMW models within this timeframe. All over car forums and…
Passenger Restraint system malfunction for the front passenger seat. This may not trigger the airbag for a passenger sitting in the front if a collision occurs and can seriously injure someone. This problem appears to be very common with BMW models within this timeframe. All over car forums and youtube videos, some videos with over 100k views per video. I am not sure how BMW has not recalled this safety issue as it seems to linger throughout many of their models for many years. As soon as the malfuction occured\, the warning sign and lamp lights did flash on.
- Engine and engine cooling
The contact owns a 2013 BMW 328I. The contact’s daughter stated that while driving at an undisclosed speed, there was smoke coming from the engine compartment. There was no warning light illuminated. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling…
The contact owns a 2013 BMW 328I. The contact’s daughter stated that while driving at an undisclosed speed, there was smoke coming from the engine compartment. There was no warning light illuminated. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); and the vehicle was taken to the dealer to have the water pump replaced. The contact was informed by the dealer after the repaired that the valve cover gasket had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 123,000.
- Engine and engine cooling
See attached document for complaint.
- Electrical system · Engine and engine cooling
See attached document for complaint.
- Electrical system
Recall was issued in August 2024 and there is yet to be a fix/remedy
- Engine
MY 2013 BMW 328 NON TURBO experienced an all of a sudden warning that the temperature was high even though the temp gauge did not show. Car was pulled over and towed to repair shop. Broken VANOS bolts were discovered and car made a load noise when run.
- Electrical system
Dropped off my BMW on June 17 for a water pump recall 24V-608 for wiring harness connector issue and the dealer did indeed discover corrosion and damage to the water pump which could cause a thermal event or a fire. However, they repaired 1 single strand of wire by replacing a pin and not the…
Dropped off my BMW on June 17 for a water pump recall 24V-608 for wiring harness connector issue and the dealer did indeed discover corrosion and damage to the water pump which could cause a thermal event or a fire. However, they repaired 1 single strand of wire by replacing a pin and not the entire connector or the water pump. Furthermore, I was charged $197 for that damaged wire saying even though the wire was corroded, I had to pay to repair that to do the recall which was to put a plastic sheath over the wiring.
- Electrical system · Engine and engine cooling
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for…
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Fuel/propulsion system
Fuel leak from factory fuel pump housing
- Electrical system · Engine and engine cooling
The contact owns a 2013 BMW 328i. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); However, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had…
The contact owns a 2013 BMW 328i. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); However, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Electrical system · Engine and engine cooling
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet…
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system · Engine and engine cooling
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time…
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system
BMW has not provided a timely solution for the latest recall dated 8/2024.
- Electrical system · Unknown or other
It has been over a year since I received the first recall notice for my vehicle, and I am continuing to receive notices from BMW that state there is no remedy available. This recall has the potential to create premature depreciating damage to my financial asset as well as serious safety risks…
It has been over a year since I received the first recall notice for my vehicle, and I am continuing to receive notices from BMW that state there is no remedy available. This recall has the potential to create premature depreciating damage to my financial asset as well as serious safety risks myself and my family. I would like to know what kind of alternative remedy BMW has to offer me, since no repair has been offered in a timely manner.
- Electrical system · Engine and engine cooling
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had…
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system · Engine and engine cooling
The contact owns a 2013 BMW 328I. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the water pump and water pump connector. The contact was advised to discontinue…
The contact owns a 2013 BMW 328I. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the water pump and water pump connector. The contact was advised to discontinue driving the vehicle. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); the VIN was included, but parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. The failure mileage was 201,000. VIN tool confirms parts not available.
- Electrical system · Engine · Fuel/propulsion system
Dear NHTSA, I am submitting this complaint regarding a serious safety issue with my [Your BMW Model & Year]. My vehicle was recalled due to an issue with the engine coolant pump, which could lead to a short circuit and, in rare cases, a fire. •The recall was issued over a month ago, but BMW has…
Dear NHTSA, I am submitting this complaint regarding a serious safety issue with my [Your BMW Model & Year]. My vehicle was recalled due to an issue with the engine coolant pump, which could lead to a short circuit and, in rare cases, a fire. •The recall was issued over a month ago, but BMW has not provided a solution or a repair date. •On March 26th, 2025, I visited an authorized BMW service center for an oil change and to address the recall, but they informed me that the necessary parts were not available and gave no timeline for the repair. •For the past three weeks, white smoke has been coming from the hood, and there is a noticeable burning smell. •I have a video documenting this issue. •My vehicle is in active use, and the problem is getting worse daily, increasing the risk of engine failure or fire. BMW’s delay in addressing this recall is putting my safety and the safety of others at risk. I request immediate action to ensure that BMW prioritizes this repair and prevents further damage to my vehicle. I would appreciate your urgent attention to this matter. Please let me know how I can proceed with this complaint. Best regards, Name: [XXX] Phone: [XXX] Vin Number : [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Engine
The vehicle's manufacturer (BMW) has failed to remedy a potentially lethal safety recall in a timely manner.
- Electrical system · Engine and engine cooling
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the parts to do the recall repair were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of…
The contact owns a 2013 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the parts to do the recall repair were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was not made aware of the issue. The contact stated while driving 50 MPH, the vehicle started running rough with the temperature gauge rising. The stabilizer warning light was illuminated. On another occasion, while driving to the residence at an undisclosed speed, the vehicle shut off. The contact stated that a message related to the fuel was displayed. The vehicle was under warranty and was repaired. The contact stated that on another occasion, the stabilizer warning light illuminated while depressing the brake pedal. The contact stated that after several minutes the vehicle was restarted and taken to the local dealer; however, the vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 129,000. VIN tool confirms parts not available.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Loss of power assist braking
In a letter dated September 26, 2013, BMW Group submitted a safety recall notice to NHTSA identifying a defect condition in the vacuum pump oil supply that may result in loss of power assist braking in 76,191 model year (MY) 2012 through 2014 BMW 3-Series, 5-Series, X1 SAV, X3 SAV, and Z4 vehicles equipped with…
In a letter dated September 26, 2013, BMW Group submitted a safety recall notice to NHTSA identifying a defect condition in the vacuum pump oil supply that may result in loss of power assist braking in 76,191 model year (MY) 2012 through 2014 BMW 3-Series, 5-Series, X1 SAV, X3 SAV, and Z4 vehicles equipped with 4-cylinder engines (NHTSA Recall 13V-454).According to BMW, movement of the seal disk within the camshaft may result in blocking of the oil supply to the vacuum pump, resulting in improper pump operation and loss of power assist braking.On July 11, 2013, BMW initiated a change to the camshaft geometry that prevented the seal disk from blocking the oil port.BMW has not received any braking complaints related to loss of power assist after the design change was implemented in production.The owners of all affected vehicles will be contacted by mail and asked to take their vehicle to a BMW dealer who will install a locking ring into the camshaft to keep the seal disk in its proper location.BMW expects to begin dealer and owner notification in November 2013 and complete dealer and owner notification in December when the remedy is expected to be available.Based on the actions taken by BMW, this investigation is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
- 10238081Upon opening and closing the tailgate, a creaking/groaning sound can be heard from tailgate actuator.
- 10235205The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via the Voice over LTE (VoLTE) function. For this purpose, the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance, and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
- 10235202Exterior rear lights do not work.
- 10230722After an automatic engine start (MSA start), the transmission intermittently goes into the Park "P" or Neutral "N" position without any customer influence.
- 10230717For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10227568According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present.
- 10215746Component specific limited warranty extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle Nitrogen Oxide (NOx) Sensor(s) to: 10 years/120,000 miles as determined by the vehicle original in-service date.
- 10215025Shipping specific non-deployed vehicle safety devices to lighting resources, llc. This service Information bulletin provides information on shipping "specific" noin-deployed vehicle safety devices that are classified as Dangerous Goods (DG) to Lighting resources, LLC
- 10215024The engine?s intake charge-air duct limited warranty extension to 10 years/120,000 miles applies to ?eligible USspecification
- 10215023Visual Inspection of Brake discs/Rotors for new car deliveries
- 10214990The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (as of 7/2012 production). This uses map North America NEXT. The Headunit High 2 (HU-H2), also called NBT-EVO, superseded the NBT HU and was introduced in 3/2014. This uses map North America EVO. The Headunit High 4 (HU-H4, also called MGU21) superseded the MGU starting with certain MY2021 vehicles with option code 6U3 Live Cockpit Professional. This uses map North America JOY. The ENTRY Media/Navigation (HU-B) is the low line business version of the navigation system and was introduced in 3/2014. This uses map North America ROUTE. The ENTRY NAV EVO (HU-B2) replaced Entry Media/Navigation as the low-line business version and was introduced in certain MY2018 vehicles. This uses map North America WAY.
- 10214953The engine coolant thermostat component-specific limited warranty extension to 10 years/120,000
- 10214256The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- 10212788The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- 10212780Component and Issue Specific Limited Emission Warranty Extension. This bulletin is notice of a limited emission warranty extension. This is NOT a notice of a Recall or Service Action. There is no immediate repair required unless the BMW vehicle is currently experiencing this problem. Customer Notification Letter Even though this is NOT a Recall, BMW NA is sending VIN-specific customer notification letters. The plastic fuel tank has two openings, one at the top right and the other at the top left. The top right opening (passenger's side, serviceable) provides a mounting point and repair access to the intake fuel pump/level sensor assembly. The top left opening (driver's side, non-serviceable) serves as an access point for the installation of the suction jet pump/level sensor assembly during the fuel tank manufacturing process. After these components are installed, the top left side opening is then permanently closed and sealed with the installation of a circular Coex biopolymer plastic cover plate which is welded into place. Over time, the left side opening plastic cover plate weld may become damaged. Should this occur, there is the possibility of fuel leakage. Additionally, your vehicle will store the corresponding fault codes that may also be generated, and the Malfunction Indicator Lamp (MIL) will illuminate.
- 10212779Component and Issue Specific Limited Emission Warranty Extension. This component-specific limited emission warranty extension applies to defects in materials or workmanship.
- 10211864The footwell module (FRM) cannot be encoded after replacement.
- 10205068Customer may complain of reduced air flow when the air conditioning system is operated for an extended time, usually longer than 30 minutes.
- 10204656With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Gelis, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BMW of North America, LLC.
- 10204619BMW of North America, LLC BMW NA is extending the limited warranty for the engine timing chain and oil pump drive chain modules to: 7 years/70,000 miles as determined by the vehicle's original in-service date
- 10204534For the above-referenced vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the engine timing chain and oil pump drive chain modules to: 7 years/70,000 miles as determined by the vehicle's original in-service date.
- 10203340Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle,when turning the steering wheel.
- 10203338The trunk lid/hatch does not open fully when unlatched with remote or hands-free operation.
- 10203331BMW of North America, LLC (BMW NA) is extending the limited warranty for the engine timing chain and oil pump drive chain modules to: 7 years/70,000 miles as determined by the vehicle's original in-service date
- 10201140With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Gelis, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BMW of North America, LLC.
- 10200489TELEMATICS UNIT RETROFIT TO 4G CELLULAR TECHNOLOGY: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
- 10200487TELEMATICS UNIT DEACTIVATION DUE TO 3G CELLULAR TECHNOLOGY DISCONTINUATION: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
- 10200249The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022. The decision to phase out 3G network technology was made at the discretion of the respective cellular carriers and lies beyond the control of BMW. Due to the phase-out, BMW Assist and ConnectedDrive services will no longer be supported after this date.
- 10200238Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle, when turning the steering wheel.
- 10200228On rare occasions during an engine oil service, the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing.
- 10200226Distribution of the following tool will be through the Automatic Tool Shipment Program
- 10199292B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.
- 10198899B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10193495The customer complains of rattling noises from the rear window when driving on rough roads.
- 10193494Butt connector for repairing a plug connection. The ?top up coolant? message is displayed in the central display (CC message ID 166). When checking the cooling system there are no leaks found and the expansion tank is filled to the proper level.
- 10188938COMBUSTION CONTROL VALVE LIFT AT IDLE: The vehicle will run rough or hesitate when accelerating from a stationary position.
Every BMW 328I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.