2011 BMW 328I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2011 BMW 328I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2011 BMW 328I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy
Dealers will inspect and replace the driver's air bag module as necessary, free of charge. Owner notification letters were mailed August 30, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk and remedy
Risk
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.
Risk and remedy
Risk
Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Remedy
BMW will notify owners, and dealers will replace the wiring and electrical connectors, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i…
Risk and remedy
Risk
If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the four VANOS housing bolts for both VANOS units (intake and exhaust), free of charge. In addition, owners of approximately 170,172 model year 2010-2012 BMW vehicles equipped with inline 6 cylinder engines not covered by this recall, will receive an extended warranty to address this condition. The recall began on September 24, 2014. Owners may contact BMW at 1-800-525-7417.
BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through…
Risk and remedy
Risk
If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
BMW IS recalling certain model year 2011 328I xdrive and 335I xdrive vehicles manufactured from february 8, 2011, through july 29, 2011. The front driveshaft attachment bolts may not have been tightened to specification. if the bolts were not tightened to specification, they may become loose.
Risk and remedy
Risk
If the bolts loosen, it could lead to a loss of power to the front wheels and ultimately a vehicle breakdown, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the front driveshaft attachment bolts free of charge. the safety recall IS expected to begin during october 2011. owners may contact BMW customer relations and services at 1-800-525-7417.
Owner complaints
579 complaints19 involved a crash26 involved a fire19 injuries
What owners report most
Latest complaints
- Vehicle speed control › Accelerator pedal
The contact owns a 2011 BMW 328I. The contact stated that while coming to a stop the brake pedal was depressed; however, after releasing the brake pedal, the vehicle independently accelerated. The contact stated that on a separate occasion while coming to a stop in front of a garage, the brake…
The contact owns a 2011 BMW 328I. The contact stated that while coming to a stop the brake pedal was depressed; however, after releasing the brake pedal, the vehicle independently accelerated. The contact stated that on a separate occasion while coming to a stop in front of a garage, the brake pedal was slightly released and the vehicle accelerated independently and crashed into the garage door. The manufacturer was notified of the failure. The vehicle was taken to the dealer, but the dealer was unable to duplicate the failure. The failure mileage was 65,000.
- Electrical system
VIN [XXX] 2011 BMW 328i 4dr. Disabled widow, and on [XXX] while driving with my 3 minor children in vehicle, vehicle attempted to stall/loss of complete electrical power, smoke from trunk/rear seat. After stopping, got the trunk opened and discovered that the Battery Safety Terminal (BST) box and…
VIN [XXX] 2011 BMW 328i 4dr. Disabled widow, and on [XXX] while driving with my 3 minor children in vehicle, vehicle attempted to stall/loss of complete electrical power, smoke from trunk/rear seat. After stopping, got the trunk opened and discovered that the Battery Safety Terminal (BST) box and Battery Distribution Box in my trunk was on fire. After researching, it came to my attention that this incident matches NHTSA Recall 13V-044 (positive battery cable to fuse box stall/loss) and 2012 battery cable fire recall (1.3M BMW 5/6/3 series - BMW stated "can result in electrical malfunction, failure to start and, in some cases, to charring or fire") re-expanded 2019. Obviously, I contacted BMW, and to say I was surprised at the complete lack of support, respect and help with this incredibly important and serious matter, would be an understatement. BMW NA rep 'Eddie' closed my case on Oct 21 (after telling me 2 days, yet waiting over a week, mind you) citing salvage/total loss, absolutely refused inspection and then with attitude, REFUSES to give me a supervisors info, told me he’s not allowed to give me any info in order to speak to anyone higher up, that he can pass along my info and if they WANT to, then THEY can contact ME. TN Certificate of Title [XXX] issued 07-31-2026 shows CLEAN title Remarks: Actual Mileage only, no brand. IF the title is/was salvaged, it was absolutely not disclosed by private seller at sale [XXX], nor stated on my title. Retaining burnt BST box and battery distribution box. Safety fire with children. Request investigation. Absolutely disgusted with the behavior from the BMW rep, ‘Eddie’ 🙄 Just completely careless and not even acknowledging how terribly close this came to ENDING THE LIVES of my 3 children and I. This has completely traumatized my daughter, as she felt the heat through the right of the backseat. Literal nightmares for her and crying if I even mention the car now. Incredibly difficult. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)
- Engine
"My vehicle is experiencing a complete mechanical breakdown with a fast-crank, no-start condition and an active fault code for exhaust valve timing. This matches the exact failure mode of active Safety Recall 23V-707 (VANOS Bolts). BMW's official safety recall report states that if a vehicle shows…
"My vehicle is experiencing a complete mechanical breakdown with a fast-crank, no-start condition and an active fault code for exhaust valve timing. This matches the exact failure mode of active Safety Recall 23V-707 (VANOS Bolts). BMW's official safety recall report states that if a vehicle shows these symptoms, owners must not drive it and must contact them to arrange pickup and transportation. However, BMW Corporate Case Manager Jasmine has officially refused to cover the tow, stating over the phone that the transport language in the recall letter 'doesn't mean they cover a tow.' BMW is failing to execute its federally mandated safety recall remedy for an inoperable, broken-down vehicle."
- Engine
I took my car to the Tigard Oregon bmw dealership for my three recalls that were needing addressed. I turned my car over to them in good working order. After picking it up after the repairs my service engine light came on. My car started knocking and rattling louder and louder. I returned to the…
I took my car to the Tigard Oregon bmw dealership for my three recalls that were needing addressed. I turned my car over to them in good working order. After picking it up after the repairs my service engine light came on. My car started knocking and rattling louder and louder. I returned to the dealership and requested they fix the issue. After a few days they contacted my and told me it needs a new engine. They say they checked over their work and the problem isn't their fault. I disagree. They say they found metal shavings in my oil. They did an oil change a week earlier and mentioned no metal in my oil.
- Electrical system · Engine · Exterior lighting › Headlights
The contact owns a 2011 BMW 328I. The contact stated that the headlights and taillights remained illuminated after the vehicle was turned off. Additionally, the vehicle intermittently failed to start up. The contact stated that AAA jump-started the vehicle, and it was determined that the battery…
The contact owns a 2011 BMW 328I. The contact stated that the headlights and taillights remained illuminated after the vehicle was turned off. Additionally, the vehicle intermittently failed to start up. The contact stated that AAA jump-started the vehicle, and it was determined that the battery was in good working condition. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact associated the failure to NHTSA Campaign Number: 17V676000 (Electrical System); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 110,000.
- Engine
I believe my car is effected by the active bmw recall NHTSA Campaign 23V-707. I have called bmw and gave them my vin number and was rudely rushed off the phone being told my car has no active recalls. I have done a ton of research and the car sounds just like every other car effected by this…
I believe my car is effected by the active bmw recall NHTSA Campaign 23V-707. I have called bmw and gave them my vin number and was rudely rushed off the phone being told my car has no active recalls. I have done a ton of research and the car sounds just like every other car effected by this recall. The car starts and idles fine initially but as soon as it drops to normal idle rpms it makes a loud clanking noise and vibrates really bad. When i go into the engine bay i hear the noise coming directly from the vanos area. The car had one code which was 2a7c before the noise. I cleared the code it has not come back but the noise is still there and therefore the vehicle is unsafe to drive. It feels and sounds like if i drive this car on public roads something catastrophic will happen. I believe that my vehicle should be covered under this recall even though they are saying my vin has no outstanding recalls. This is literally the same exact issue for the recall in the first place and it would be amazing if they could help me out.
- Engine
I brought my vehicle to an authorized dealer for three open safety recalls. Two were performed at no charge. The third, the VANOS adjustment unit screw connection recall, was not performed. The dealer stated in writing on the repair order that the vehicle has a broken valve cover bolt, that the…
I brought my vehicle to an authorized dealer for three open safety recalls. Two were performed at no charge. The third, the VANOS adjustment unit screw connection recall, was not performed. The dealer stated in writing on the repair order that the vehicle has a broken valve cover bolt, that the valve cover will not seal properly, and that a new valve cover is recommended to complete the recall. They quoted $1,077.43 for a valve cover as a customer-pay repair and stated the recall could not be completed until that was done. I declined the valve cover. The recall was not performed. The bolt is not broken and the valve cover is not broken. The threads in the cylinder head bolt boss are stripped, and a larger bolt was installed that holds. There is no oil leak. A new valve cover would thread into the same stripped hole in the cylinder head and would not repair the damaged threads. The dealer's proposed repair does not address the condition they described. The manufacturer's dealer bulletin for this recall lists a cylinder head cover profile seal as a recall part and does not list a valve cover in any parts list. The remedy requires removing the cylinder head cover regardless. I left without signing the repair order. The recall remains open. I am reporting that a free safety recall remedy was conditioned on a customer-pay repair. The dealer could have performed the recall, documented the pre-existing thread damage on the repair order, noted that the customer was advised and declined the valve cover, and disclaimed responsibility for any future seepage at the cover. I would have accepted that. Instead they performed neither the recall nor any repair, and left a federal safety recall open.
- Engine and engine cooling
The contact owns a 2011 BMW 328I. The contact stated that upon starting the vehicle, the low oil pressure warning light illuminated, and the vehicle stalled. The vehicle was towed to an independent mechanic, where it was diagnosed, and determined that the VANOS bolts had failed and needed to be…
The contact owns a 2011 BMW 328I. The contact stated that upon starting the vehicle, the low oil pressure warning light illuminated, and the vehicle stalled. The vehicle was towed to an independent mechanic, where it was diagnosed, and determined that the VANOS bolts had failed and needed to be replaced. The vehicle was not repaired due to the cost. The contact related the failure to TSB Number: SIB 11 04 14. The manufacturer was notified of the failure and informed the contact that the vehicle was covered under the TSB. The failure mileage was approximately 157,637.
- Engine
The contact owns a 2011 BMW 328I. The contact stated that while driving at various speeds, there was a burning odor coming from the vehicle. The odor was more prominent while the vehicle was idling. The RPM fluctuated while idling, causing the vehicle to stall. The contact would depress the brake…
The contact owns a 2011 BMW 328I. The contact stated that while driving at various speeds, there was a burning odor coming from the vehicle. The odor was more prominent while the vehicle was idling. The RPM fluctuated while idling, causing the vehicle to stall. The contact would depress the brake pedal, place the vehicle in neutral, turn off, and restart the vehicle to accelerate and continue driving. The air bag warning light was illuminated, and the message, "Check Engine Soon," was displayed. The vehicle was taken to a certified mechanic, and a diagnostic code was retrieved for Positive Crankcase Ventilation (PCV) failure; however, no repairs were completed. The contact completed some research and learned that the failure could be occurring due to air entering the brake lines. The contact also found information about NHTSA Campaign Number: 22V119000 (Engine); however, the VIN was not included. The vehicle was not taken to the dealer, diagnosed, or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 133,000.
- Engine
The contact owns a 2011 BMW 328I. The contact stated that on several occasions while driving on the streets and the highway, the vehicle lost automotive power. There were no warning lights illuminated at the time of the failure. The contact stated that the vehicle jerked unexpectedly, stalled, and…
The contact owns a 2011 BMW 328I. The contact stated that on several occasions while driving on the streets and the highway, the vehicle lost automotive power. There were no warning lights illuminated at the time of the failure. The contact stated that the vehicle jerked unexpectedly, stalled, and failed to accelerate over 30 MPH. The vehicle was towed to an independent mechanic but was not diagnosed or repaired. The mechanic referred the contact to the dealer for further assistance and stated that the failure could be related to a recall. The vehicle was towed to the dealer, but was not diagnosed or repaired. The contact stated that the failure started after the vehicle was repaired under an air bag recall by the dealer, and the failure persisted. The manufacturer was made aware of the failure. The approximate failure mileage was 200,000.
- Fuel/propulsion system
Fuel Pump Control Module and Fuel Pump Failed at highway speeds. There was a notification warning for a failed fuel pump and then the engine shut down and stalled at highway speeds within seconds.
- Engine
> While driving the car, low oil pressure indicator came on and within less than a mile later there was a sudden loss of power, engine stalled and then would not start again, requiring vehicle to be towed off the road and to a repair garage. Yes, vehicle is available for inspection upon request.…
> While driving the car, low oil pressure indicator came on and within less than a mile later there was a sudden loss of power, engine stalled and then would not start again, requiring vehicle to be towed off the road and to a repair garage. Yes, vehicle is available for inspection upon request. >Vehicle was immobile on the road putting driver of vehicle and other vehicles on the road at risk of accident and injury. > Attached documentation reviews the issue. > Vehicle originally inspected by non-dealership garage that strongly recommended the vehicle be evaluated by BMW. Vehicle was towed to and inspected by BMW Sewickley [XXX] . BMW states not covered under Vanos recall. >Only immediately prior to stall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine
> While driving the car, the low oil pressure indicator came on, and within less than a mile later there was a sudden loss of power, engine stalled and then would not start again, requiring the vehicle to be towed off the road and to a repair garage. > Vehicle was immobile on the road putting…
> While driving the car, the low oil pressure indicator came on, and within less than a mile later there was a sudden loss of power, engine stalled and then would not start again, requiring the vehicle to be towed off the road and to a repair garage. > Vehicle was immobile on the road putting driver of this vehicle and other vehicles on the road at risk of an accident and injury. > Vehicle originally inspected by non-dealership garage that strongly recommended the vehicle be evaluated by BMW. Vehicle was towed to and has been inspected by BMW Sewickley [XXX] . > Only immediately prior to stall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine
Engine lost all oil pressure, smoke came through vents with the smell of burnt oil. Engine stalled, intake camshaft no longer moves when the engine is trying to turn over. Vanos system failed.
- Electrical system
The power cable to my battery needed to be replaced from the front to the rear. This seems like the recall NHTSA CAMPAIGN ID: 13V044000 but my car was not listed for it.
- Engine and engine cooling
The contact owns a 2011 BMW 328I. The contact stated that while driving approximately 65 MPH, the check engine warning light illuminated, and the vehicle hesitated and stalled. The vehicle was restarted several times but continually stalled. The vehicle was later towed to the residence. The contact…
The contact owns a 2011 BMW 328I. The contact stated that while driving approximately 65 MPH, the check engine warning light illuminated, and the vehicle hesitated and stalled. The vehicle was restarted several times but continually stalled. The vehicle was later towed to the residence. The contact examined the engine and discovered metal shavings in the VANOS solenoid engine oil. The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure. The vehicle was not yet repaired. The failure mileage was 120,000.
- Engine and engine cooling
The contact owns a 2011 BMW 328I. The contact stated that while driving at an undisclosed speed, the contact noticed an abnormal dinging sound coming from underneath the hood. The vehicle was taken to the dealer where it was diagnosed with a detached VANOS bolt. The contact was informed that the…
The contact owns a 2011 BMW 328I. The contact stated that while driving at an undisclosed speed, the contact noticed an abnormal dinging sound coming from underneath the hood. The vehicle was taken to the dealer where it was diagnosed with a detached VANOS bolt. The contact was informed that the failure was due to unrepaired recall NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling). The recall repair was performed. The vehicle was repaired. The contact stated that when the vehicle was released to the contact, the contact stated that the vehicle was shaking violently, and the RPM was fluctuating. In addition, the engine shut off while idling. The contact stated that the failure occurred before leaving the dealer. The dealer requested that the vehicle remain at the dealer for inspection. The vehicle was taken back to the dealer the following day. The vehicle was inspected, and the contact was informed that the failure was not related to the recall. The contact was requested to provide a diagnostic fee for further diagnostic tests and the contact declined. The contact stated that the vehicle was in worse condition after the recall repair was performed. The manufacturer was not made aware of the failure. The failure mileage was 91,000.
- Electrical system · Exterior lighting · Unknown or other
Footwell module (FRM) module went out after negative battery disconnect to change fuse. Module being inoperable is causing windows to not operate,interior lighting not working, headlights stay dim (not good for nightime driving), blinkers inoperable (not good for driving with windows not working- no arm signals), dash light also inoperable.
- Structure › Body
Door handle plastics are disintegrating in to a soft sticky matter. Please advice as this seem to a poor decision on the type of material need in the door handles.
- Engine and engine cooling
The contact owns a 2011 BMW 328I. The contact received notification of NHTSA Campaign Number: 23V707000 (ENGINE AND ENGINE COOLING). The recall repair was completed; however, on the drive home after the vehicle was retrieved, while driving 60 MPH, the engine seized. The contact stated that the…
The contact owns a 2011 BMW 328I. The contact received notification of NHTSA Campaign Number: 23V707000 (ENGINE AND ENGINE COOLING). The recall repair was completed; however, on the drive home after the vehicle was retrieved, while driving 60 MPH, the engine seized. The contact stated that the vehicle was sluggish and hesitated before stalling in the middle lane of the highway. The oil pressure warning light was illuminated. The contact attempted to restart the vehicle, and after several attempts, the vehicle failed to restart. The contact was able to coast to the side of the road. The vehicle was towed to the dealer, where it was determined that the incorrect oil filter was installed on the vehicle. The vehicle was repaired. The contact towed the vehicle back to the residence. The manufacturer was made aware of the failure and offered the contact a 10% discount on a new engine. The failure mileage was 126,657.
- Engine and engine cooling
The contact owns a 2011 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (ENGINE AND ENGINE COOLING). The contact had received various unknown notifications of NHTSA recalls. The vehicle was taken to the dealer, where the vehicle was repaired. The contact stopped by…
The contact owns a 2011 BMW 328I. The contact received notification of NHTSA Campaign Number: 22V119000 (ENGINE AND ENGINE COOLING). The contact had received various unknown notifications of NHTSA recalls. The vehicle was taken to the dealer, where the vehicle was repaired. The contact stopped by the dealer to pick up the vehicle, and when the vehicle was started, there was an abnormal sound coming from the engine. The contact stated that the vehicle was idling abnormally. The contact left the vehicle at the dealer. The contact believed that the dealer had damaged the vehicle. The dealer informed the contact that the vehicle had other issues that the contact needed to repair for the dealer to repair the vehicle again. The manufacturer was not notified of the failure. The failure mileage was 134,184.
- Engine and engine cooling
The contact owns a 2011 BMW 328I. The contact stated while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull to the shoulder of the roadway, where the vehicle failed to restart. No warning lights were illuminated. The vehicle was not taken to…
The contact owns a 2011 BMW 328I. The contact stated while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull to the shoulder of the roadway, where the vehicle failed to restart. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling), but the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was unknown.
- Electrical system
The contact owns a 2011 BMW 328I. The contact stated that while attempting to start the vehicle, the electrical system failed to function as intended. The contact stated there was no warning light illuminated. The vehicle eventually started; however, the failure occurred. The vehicle was not…
The contact owns a 2011 BMW 328I. The contact stated that while attempting to start the vehicle, the electrical system failed to function as intended. The contact stated there was no warning light illuminated. The vehicle eventually started; however, the failure occurred. The vehicle was not diagnosed or repaired. The contact stated that the failure persisted. The manufacturer had been informed of the failure and transferred the contact to the NHTSA Hotline. The contact researched online and related the failure to NHTSA Campaign Number: 13V044000 (Electrical System); however, the VIN was not included. The failure mileage was approximately 116,000.
- Engine · Engine and engine cooling
The contact owns a 2011 BMW 328I. The contact stated that while driving at various speeds and attempting to slow down, the vehicle started to jerk abnormally, with the check engine warning light illuminated. The vehicle was taken to a local dealer and was diagnosed, and the contact was informed…
The contact owns a 2011 BMW 328I. The contact stated that while driving at various speeds and attempting to slow down, the vehicle started to jerk abnormally, with the check engine warning light illuminated. The vehicle was taken to a local dealer and was diagnosed, and the contact was informed that the camshaft adjusting unit was faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 106,000.
- Air bags · Engine
RE: Recall on 2011 328i Vin# [XXX] I drove the car to run an errand, car was running ok but had a miss. During my drive home, the car stalled. I had to quickly coast to a parking lot in order not to get hit by the car behind me. I tried to restart the car, but it acted as if it needed a jump.…
RE: Recall on 2011 328i Vin# [XXX] I drove the car to run an errand, car was running ok but had a miss. During my drive home, the car stalled. I had to quickly coast to a parking lot in order not to get hit by the car behind me. I tried to restart the car, but it acted as if it needed a jump. Tried to jump the car but it turned over slowly without starting. Ended up getting it towed to Metairie very early the next morning, due to parades. Had a friend of mine, a BMW shop owner, take a look at the car. He told me that he found out that it had a few recalls and he thought that may be the problem. I spoke with a service advisor at BMW dealer that checked the vin and said the recalls would be taken care of along with anything it caused. I made the appointment and had it towed to BMW dea;er. I was assigned to Erin C, Service Advisor, when I made my appointment. My appointment was for 7:30 AM on the 28th of March. I heard from Erin at 4:30 that afternoon with an update. She told me that I had a seized engine and it was going to cost ten thousand or more to replace the engine. I asked if the recall was done on it, because the recall stated that one of the indicators of the Vanos issue was that it would not start any more. I also found information saying that stalling, engine seizing, and oil starvation can be dangerously caused by the recall. Erin stated that they would take the valve cover off to confirm. Didn’t hear from her on Friday, or over the weekend. I got her on the phone Monday evening at 5:30 PM. Erin told me the same information that after they took off the valve cover and videoed it (have not seen that video yet). That my engine was seized. She assured me that they hooked up the car to communicate with the engineers who confirmed, from all the evidence, that the engine seizing was not caused by the recall but lack of oil circulation. If she had a diagnostic done on the car, she had not shared any codes found with me at this INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATIO
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10215024The engine?s intake charge-air duct limited warranty extension to 10 years/120,000 miles applies to ?eligible USspecification
- 10211864The footwell module (FRM) cannot be encoded after replacement.
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10170574SERVICE ACTION: N54T ENGINE - INSPECT AND REPLACE INJECTOR(S). The piezo-type fuel injectors may cause a rough running at start-up or rough running while at idle.
- 10163047RETRACTABLE HARDTOP STATUS REQUEST SUPPLEMENT. This Service Information bulletin replaces SI B54 09 07 dated September 2018.
- 10162434Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10162431"Erroneous CC Message "Remote control! Do not switch off the engine" is Displayed. An erroneous CC message, "Remote control!" " Do not switch off the engine" is displayed in the Central Information Display (CID). The engine can still be started, even with the CC message displayed. CAUSE: Car Access System (CAS) software error"
- 10162426Trunk Lid Intermittently Does Not Open or Latch. Intermittently the trunk lid does not pop open when using the remote, or latch when closing. If the vehicle is driven and the trunk is not closed fully, a Check Control message will be displayed in the instrument cluster. CAUSE: The trunk lid is out of tolerance. When opening or closing the trunk lid, the latch rubs against the striker because of insufficient clearance.
- 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
- 10162406Power Mirrors and/or Windows are Inoperative. The power windows and/or power mirrors are inoperative. The LED on the headlight switch is flashing. There is a check control message for Windows/Mirrors/ Headlights. There may also be a complaint of water in one or both headlights. One of the following fault codes may be stored: * 9CBD - Communication with stepper motor box left defective * 9CBE - Communication with stepper motor box right defective * 9CC1 - Communication with mirror driver side defective * 9CC2 - Communication with mirror passenger side defective/Right Stepper Motor Controller (SMC) signaling fault * 9CCF - Communication with LIN control defective Left and/or right headlight housing cover is not properly fitted allowing water ingress into the Stepper Motor Controller (SMC) connector. CAUSE: Left and/or right headlight housing cover is not properly fitted allowing water ingress into the Stepper Motor Controller (SMC) connector.
- 10162404"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Follow the diagnosis test plan using the latest ISTA version. In Information Search, select the "Function Structure"" tab. Select Body, Mirror, Door mirror, Driver's or passenger side, Exterior Mirror Malfunction, and then press "Start Search". Select test plan ""AM5102_00010".
- 10162395N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
- 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10154816In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
- 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
- 10152314Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM door lock status due to voltage variations
- 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
- 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151255ISTA/P Cannot Program an E-Series N55 Replacement DME. ISTA/P fails when attempting to program a replacement DME (MEVD172) on BN2000 E-Series vehicles with the Continental HPP. Part number: 12 14 8 618 483. DME logistic error between the replacement hardware and basic software prevents correct programming with ISTA/P.
- 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151170N51 Engine: Service Engine Soon Lamp Illuminated - Loss of Power and Various Faults Stored in the DME. The customer complains that the Service Engine Soon lamp is illuminated. The vehicle has lost power; the engine cranks but will not start; and various faults are stored in the DME for engine misfire and/or mixture adaptations. CAUSE The vehicle has lost fuel system delivery pressure due to a loose or split fuel line inside the fuel tank. The failure is related to an unfavorable stacking of tolerances between the rubber fuel hose and the plastic regulator nipple or deterioration of the rubber hose construction material.
- 10151119SI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
- 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
- 10151079SI B13 03 15 February 2016 Fuel Systems Technical Service This Service Information bulletin supersedes SI B13 03 15 dated March 2015 and replaces SI B13 04 13 dated March 2014. SUBJECT N20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error. The current version of the ETK incorporates multiple part number errors for the Bosch type injectors. Ordering the injectors by VIN number or manual identification in ETK may result in an incorrect part number.
- 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
- 10150894?RETRACTABLE HARDTOP STATUS REQUEST SUPPLEMENT. INFORMATION Documents have been developed showing the known correct statuses for all hall sensors and micro switches used to operate the retractable hard top (RHT). This document is intended to act as a supplement to the diagnostic information available in ISTA. Comparing these statuses to the actual statuses of a vehicle with a functional problem may assist in narrowing down which sensor/switch is contributing to the functional problem. For E93, the status request may be found by connecting the car to ISTA and selecting: Control module functions/CTM Convertible top module/Diagnosis Requests ?Sensors/Switches For F33/F83, the statuses should be checked using the applicable test plan as instructed in attachment B54 09 07 F33 F83 RHT Status.pdf. For I15, the statuses should be checked using the applicable test plan as instructed in attachment B54 09 07 I15 Top Status.pd
- 10150389Service Action: CIC - Install Navigation Road Map Database 2013. The Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
- 10150381Junction Box Pin Assignment Change. When replacing the Junction Box (fuse box) using P/N 61 14 6 978 270 or later, note that various pin assignments have changed. The following additional work procedure is necessary to properly perform this repair.
- 10150365"N51, N52K and N52T: Idle Fluctuation During Engine Warm-up Phase. After a cold engine start, the idle speed may be unstable or start fluctuating up and down slightly while the vehicle is stopped. On vehicles with automatic transmissions, roughness or shuddering may be felt during this warm-up period when diving away slowly in ""D"" or in ""R"" without depressing the accelerator pedal. No relevant errors are stored in the DME fault code memory, and these symptoms are no longer present once the engine is at operating temperature (> 90C). Unfavorable DME software"
- 10150334"Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD). Note: The INITIAL enabling code ""FSC CIC map, N. America 2013 INITIAL"" is necessary to start the installation process and to activate the road map database."
- 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
- 10150329Intermittently the trunk lid does not pop open when using the remote, or latch when closing. If the vehicle is driven and the trunk is not closed fully, a Check Control message will be displayed in the instrument cluster. CAUSE The trunk lid is out of tolerance. When opening or closing the trunk lid, the latch rubs against the striker because of insufficient clearance.
- 10150324?SI B51 15 08 Body Equipment October 2012 Technical Service. This Service Information bulletin supersedes SI B51 15 08 dated July 2008. designates changes to this revision SUBJECT Rear Window False Anti-trap Activation. INFORMATION The anti-trap protection feature may be activated when no obstruction is present. This may occur at either one or both of the rear windows. The root cause of the false anti-trap activation may be difficult to determine. The attached diagnosis flowchart has been developed to assist with determining the actual root cause of the failure as well as to help prevent unnecessary part replacements. The root cause is typically either an issue with the window system, or an electrical/software issue. The diagnosis flowchart will help ensure that repairs are only carried out for the system that is most likely at fault. Refer to B511508_Attachment. PARTS INFORMATION Refer to the Electronic Parts Catalog (EPC) for the appropriate parts noted in the diagnostic flowchart. WARRANTY INFORMATION Not applicable.
Every BMW 328I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.