2008 BMW X3

Recalls

3 recalls name the 2008 BMW X3. Newest first.

• Air bags › Frontal › Driver side › Inflator module

  Jan 15, 2020NHTSA 20V01700059,965 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…

  Risk and remedy

  Risk

  An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

  Remedy

  BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.

  Full recall details →

• Engine and engine cooling › Exhaust system › Emission control › Crankcase (pcv)

  Oct 30, 2017NHTSA 17V683000740,561 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.

  Risk and remedy

  Risk

  An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.

  Remedy

  BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.

  Full recall details →

• Air bags › Sensor › Occupant classification

  Sep 28, 2017NHTSA 17V60500085,302 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2006-2010 BMW X3 2.5i, X3 3.0i and X3 xDrive30i Sports Activity Vehicles. The front passenger seat occupant detection mat that determines if, and how, the passenger frontal air bag should deploy in a crash may fatigue and develop cracks which could lead to a system failure.

  Risk and remedy

  Risk

  Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.

  Remedy

  BMW will notify owners, and dealers will replace the front passenger seat occupant detection mat, free of charge. Interim owner notification letters were mailed on November 27, 2017. A second notification letter will be sent when parts are available. Owners may contact BMW customer service at 1-800-525-7417.

  Full recall details →

Owner complaints

What owners report most

1. Air bags32
2. Engine16
3. Engine and engine cooling15
4. Seats6
5. Power train5
6. Unknown or other5
7. Electrical system5
8. Fuel/propulsion system2
9. Service brakes2
10. Visibility/wiper1

Latest complaints

• Mar 18, 2026AKFire
  Electrical system · Engine · Unknown or other
  I am reporting a vehicle fire involving my 2008 BMW X3, which had an active safety recall for the Positive Crankcase Ventilation (PCV) valve heater (Recall Campaign No. 22V-119). This recall identifies a risk of short circuiting, overheating, and potential fire. On February 27, 2026, I contacted…

  I am reporting a vehicle fire involving my 2008 BMW X3, which had an active safety recall for the Positive Crankcase Ventilation (PCV) valve heater (Recall Campaign No. 22V-119). This recall identifies a risk of short circuiting, overheating, and potential fire. On February 27, 2026, I contacted BMW after discovering multiple active recalls on my vehicle. I specifically asked whether the vehicle was safe to drive. After consulting internally, I was advised that I did not need a tow and that the vehicle was safe to drive. Based on this guidance, I scheduled a repair appointment for March 24, 2026. On March 14, 2026, before starting the vehicle, I noticed a very faint smell of burning plastic, which I reasonably believed was coming from a nearby source and not from my vehicle. After starting the vehicle and driving approximately 2–3 blocks, the smell rapidly intensified and began filling the interior. Multiple dashboard warning lights illuminated, and the vehicle lost acceleration almost immediately. I safely pulled the vehicle off the road, turned it off, and opened the hood, at which point I observed smoke and active fire originating from the rear/center area of the engine compartment. I immediately called 911, and the Central Mat-Su Fire Department responded and extinguished the fire. The vehicle sustained extensive fire damage and has been deemed a total loss. I am concerned that despite a known recall involving fire risk, I was advised that the vehicle was safe to drive, which may have contributed to this incident. There were no indicators of any problems prior to driving it and the dashboard only lit up seconds before the vehicle stopped moving and caught fire. It has not been inspected by anyone but I have it covered on my property to preserve the evidence. I am waiting to receive the fire department report and can provide that once it’s available.

• Dec 26, 2024FL130,000 mi
  Electrical system › Seat heater › Wiring harness
  The contact owns a 2008 BMW X3. The contact stated while driving approximately 20 MPH with the front driver's seat heater activated, the contact felt a sharp pain on the buttock and immediately leaned forward. The contact stated that upon touching the seat, the contact noticed that the seat heater…

  The contact owns a 2008 BMW X3. The contact stated while driving approximately 20 MPH with the front driver's seat heater activated, the contact felt a sharp pain on the buttock and immediately leaned forward. The contact stated that upon touching the seat, the contact noticed that the seat heater had burned the seat through the seat leather cover. There was no warning light illuminated. The contact was able to pull to the side of the road immediately, and the contact turned off the seat heater. The contact noticed that the seat burn hole was the size of a cigarette hole, and there was a burn mark on the contact's pants. The contact stated that the burning sensation he had sustained did not require medical assistance. The contact was able to continue driving. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 130,000.

• Oct 28, 2024NC325,000 mi
  Tires
  The contact owns a 2008 BMW X3 equipped with Arroyo Tires, Tire Line: Grand Sport A/S, Tire Size: 254/40/R19, DOT Number: 1TBY3KB5C. The contact stated while driving at an undisclosed speed, the contact noticed that the tread of the tires became inoperable. The contact stated that the vehicle…

  The contact owns a 2008 BMW X3 equipped with Arroyo Tires, Tire Line: Grand Sport A/S, Tire Size: 254/40/R19, DOT Number: 1TBY3KB5C. The contact stated while driving at an undisclosed speed, the contact noticed that the tread of the tires became inoperable. The contact stated that the vehicle became difficult to control. The contact parked the vehicle and inspected all the tires and the contact noticed that the inside of all the tires tread had separated. The vehicle was taken to an independent where it was diagnosed that the tires failed due to the tires being delaminated, and the tires needed to be replaced. The tires were replaced. The manufacturer was notified of the failure. The tire failure mileage was 500. The vehicle failure mileage was 325,000.

• Jul 29, 2024NJ142,000 mi
  Air bags
  The contact owns a 2008 BMW X3. The contact stated while driving at an undisclosed speed, the air bag warning light illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the front passenger’s side seat occupant detection mat. The vehicle was not repaired. After…

  The contact owns a 2008 BMW X3. The contact stated while driving at an undisclosed speed, the air bag warning light illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the front passenger’s side seat occupant detection mat. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 17V605000 (Air Bags), but the VIN was not included. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was 142,000.

• Mar 12, 2024MA
  Engine

  The car no longer starts. When towing it to a BMW dealership, they informed me that there is a problem with the VANOS bolts and that "they snap easily"; however after some research into it I realized that these engines have a recall for this specific issue only that my vehicle isn't listed under the recall. I believe this is a mistake and that it should be.

• Feb 29, 2024RI200,000 mi
  Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact stated that while driving at 20 MPH in cold weather, there was smoke coming from the engine compartment. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was…

  The contact owns a 2008 BMW X3. The contact stated that while driving at 20 MPH in cold weather, there was smoke coming from the engine compartment. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted; however, the contact received no response. The contact stated that the failure was related to NHTSA Campaign Number: 22V119000 (Engine and Engine); the VIN was included. The failure mileage was approximately 200,000.

• Oct 22, 2023MI
  Electrical system
  The wiring insulation inside of the headlight on my vehicle deteriorated, causing the wires to be exposed. The headlight stopped working because of the wires touching, and a defective lamp dash light came on. Exposed wires touching has the potential to start fires. I have completely re wrapped all…

  The wiring insulation inside of the headlight on my vehicle deteriorated, causing the wires to be exposed. The headlight stopped working because of the wires touching, and a defective lamp dash light came on. Exposed wires touching has the potential to start fires. I have completely re wrapped all of the wiring inside of the headlights with heat shrink so I no longer have the problem, although the problem first appeared after I tried replacing the light bulb

• Jul 27, 2023CO
  Air bags · Service brakes · Steering
  The steering angle sensor has faulted, at around 60,000 miles. This fault results in possible airbag failure, in conjunction with inability to perform safety breaking mechanisms, as well as disabling the cars 4x4 stability control features. BMW as well as other BMW third-party mechanics have told…

  The steering angle sensor has faulted, at around 60,000 miles. This fault results in possible airbag failure, in conjunction with inability to perform safety breaking mechanisms, as well as disabling the cars 4x4 stability control features. BMW as well as other BMW third-party mechanics have told me this is a reoccurring problem and could pose a serious danger if in an accident. BMW officially told me to put a complaint in so that a recall could be performed. I will not pay 2000 for my airbags to work, as it is a feature required by law to operate properly. I will upload all necessary documentation if needed, should this complaint be taken into consideration.

• May 12, 2023PA180,000 mi
  Engine and engine cooling
  The contact owned a 2008 BMW X3. The contact stated while driving at an undisclosed speed, he turned on the heater and became aware of smoke coming from under the hood of the vehicle. The vehicle then started to overheat, and the coolant temperature warning light and the check engine warning…

  The contact owned a 2008 BMW X3. The contact stated while driving at an undisclosed speed, he turned on the heater and became aware of smoke coming from under the hood of the vehicle. The vehicle then started to overheat, and the coolant temperature warning light and the check engine warning illuminated. The contact stated that he veered off the road and turned the vehicle off. The contact then stated that he waited a few minutes and allowed the engine to cool down. Additionally, the contact stated that he added water to the radiator after the engine had cooled down. The contact then stated that he restarted the vehicle and while driving, he noticed smoke coming from under the hood of the vehicle before the vehicle stalled. The vehicle failed to restart. The vehicle was inspected by an independent mechanic where the contact was informed that the engine failed and needed to be replaced. The vehicle was not diagnosed nor repaired. The contact stated that after several attempts to repair the vehicle, the vehicle was then towed away and disposed. The contact then stated that six years later he received notification of the NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the dealer nor manufacturer was notified of the failure. The failure mileage was approximately 180,000.

• Feb 28, 2023MA
  Engine and engine cooling
  The contact owns a 2008 BMX X3. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…

  The contact owns a 2008 BMX X3. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The local dealer was notified of the issue and confirmed that parts were not yet available for the recall repair. The manufacturer was not notified of the issue. The contact had not experienced a failure. Parts distribution disconnect.

• Nov 18, 2022NV
  Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the dealer was contacted and stated that parts were not yet available. The contact…

  The contact owns a 2008 BMW X3. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the dealer was contacted and stated that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that the parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

• Nov 10, 2022CA115,000 mi
  Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact received notification of the NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The contact stated that after attempting to turn on the heat, the heat failed to properly operate. The contact stated that the heat was either too low or too hot.…

  The contact owns a 2008 BMW X3. The contact received notification of the NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The contact stated that after attempting to turn on the heat, the heat failed to properly operate. The contact stated that the heat was either too low or too hot. The contact was concerned that the system would overheat. No warning lights were illuminated. The dealer was notified of the failure and the contact was informed that parts were not available for the recall repair. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer exceeded a reasonable amount time for the recall repair. The local dealer was made aware of the issue and confirmed that parts were not yet available for the recall repair. The manufacturer was not notified of the failure. The failure mileage was approximately 115,000. VIN tool confirms parts not available.

• Nov 3, 2022GA78,000 mi
  Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact stated while driving 30 MPH, the engine was shutting off inadvertently. Several unknown warning lights were illuminated. Additionally, the contact stated while driving at an undisclosed speed, the vehicle stalled in the middle of the road. The contact was…

  The contact owns a 2008 BMW X3. The contact stated while driving 30 MPH, the engine was shutting off inadvertently. Several unknown warning lights were illuminated. Additionally, the contact stated while driving at an undisclosed speed, the vehicle stalled in the middle of the road. The contact was unable to veer to the side of the road. The contact was able to restart the vehicle after several attempts. The contact drove back to her residence. The contact stated that the failure had been reoccurring while driving. The contact later received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted several times and informed the contact that parts were not yet available. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 78,000. VIN tool confirms parts not available.

• Oct 26, 2022TX169,935 mi
  Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact stated while driving 25-30 MPH, he smelled a burning odor and saw smoke coming out from underneath the hood. The contact veered to the side of the road and allowed the vehicle to cool down. The contact was able to continue driving. The contact stated that…

  The contact owns a 2008 BMW X3. The contact stated while driving 25-30 MPH, he smelled a burning odor and saw smoke coming out from underneath the hood. The contact veered to the side of the road and allowed the vehicle to cool down. The contact was able to continue driving. The contact stated that the failure had been reoccurring. The vehicle was taken to several independent mechanics who informed the contact that they could not duplicate the failure. The contact later received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) that he associated with the failure; however, the part to do the recall repair was not yet available. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure and referred the contact to the dealer. The failure mileage was approximately 169,935. VIN tool confirms parts not available.

• Oct 10, 2022IA
  Unknown or other

  I got Safety recall letter in April 2022 for 22V-119 PCV valve Heater. As of today, 10/10/2022, the dealer in North liberty Iowa don't have the part and they don't know when they get the part.

• Aug 10, 2022CA170,000 mi
  Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact stated when she picked up her vehicle from the dealer after having NHTSA Campaign Number:17V683000 (Engine And Engine Cooling) completed while driving at 40 MPH, the vehicle started overheating. The contact was able to pull over and when shutting off and…

  The contact owns a 2008 BMW X3. The contact stated when she picked up her vehicle from the dealer after having NHTSA Campaign Number:17V683000 (Engine And Engine Cooling) completed while driving at 40 MPH, the vehicle started overheating. The contact was able to pull over and when shutting off and attempting to restart the vehicle, the vehicle would not start. The dealer was contacted, and they stated the vehicle needed to be diagnosed. The manufacturer was contacted, and they also stated the vehicle needed to be diagnosed. The failure mileage was 170,000

• Jul 13, 2022GA200,000 mi
  Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, there was smoke coming from underneath…

  The contact owns a 2008 BMW X3. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, there was smoke coming from underneath the hood and the exhaust pipe. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 200,000. VIN tool confirms parts not available.

• Jun 29, 2022CA
  Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not yet available. The contact stated…

  The contact owns a 2008 BMW X3. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

• May 27, 2022WI188,000 mi
  Engine and engine cooling
  The contact's daughter owns a 2008 BMW X3. The contact's daughter received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, a burning odor was…

  The contact's daughter owns a 2008 BMW X3. The contact's daughter received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, a burning odor was detected. The contact pulled over and waited until the vehicle cooled down, then restarted the vehicle. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 188,000. VIN tool confirms parts not available.

• May 24, 2022CTFire
  Engine and engine cooling
  The contact's wife owns a 2008 BMW X3. The contact stated while driving at 40-45 MPH, he saw smoke coming out from underneath the hood of the vehicle. The contact was unsure whether there were warning lights illuminated. The contact veered to the side of the road. The contact then opened the hood…

  The contact's wife owns a 2008 BMW X3. The contact stated while driving at 40-45 MPH, he saw smoke coming out from underneath the hood of the vehicle. The contact was unsure whether there were warning lights illuminated. The contact veered to the side of the road. The contact then opened the hood of the vehicle and saw flames. The contact was able to extinguish the flames with the assistance of the fire department. There were no injuries sustained. The contact was unsure whether a fire department report and a police report were filed. The vehicle was towed to the contact's residence. The contact stated that a couple of days later, he was able to restart and drive the vehicle. The contact later received notification of NHTSA Campaign Number: 22V119000 (ENGINE AND ENGINE COOLING) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer and the manufacturer were not notified of the failure. The vehicle was diagnosed or repaired. The failure mileage was unknown.

• Apr 28, 2022CA
  Engine · Unknown or other
  I was driving my car and the car overheated due to a faulty pcv valve heater: 1.The purpose of the PCV heater is to prevent the PCV valve from freezing in cold ambient temperatures. Heated PCV valves are heated either by water or electric. Water heated systems use engine coolant to heat the valve…

  I was driving my car and the car overheated due to a faulty pcv valve heater: 1.The purpose of the PCV heater is to prevent the PCV valve from freezing in cold ambient temperatures. Heated PCV valves are heated either by water or electric. Water heated systems use engine coolant to heat the valve to prevent freezing. Electrically heated systems use a heating element enclosed in the PCV valve to prevent the valve from freezing. Symptoms of my car Faulty water pump 2 A malfunctioning pcv valve heater, a clogged hose or PCV system or inoperative valve can increase oil consumption because pressure builds when the vapors in the crankcase aren't allowed to flow into the combustion chambers. That additional pressure can force oil past seals and gaskets Symptoms of my car Leaking oil pan gasket Lealing valve cover gasket 3 If the PCV valve and or pcv heater is faulty , the extra gunk can mess up a BMW X3’s spark plugs and increase oil consumption. Symptoms of my car Faulty spark plugs 4.Excessive heat or excessive oil due to malfunctioning pcv valve heater can cause a camshaft actuator to fail Symptoms of my car Faultt camshaft actuator

• Apr 22, 2022PA
  Engine · Engine and engine cooling
  The contact owns a 2008 BMW X3. The contact stated that while at a stop there was an abnormal plastic burning odor coming through the vent. Additionally, the vehicle lost motive power with the check engine warning light illuminated. An independent mechanic was called to her home for maintenance…

  The contact owns a 2008 BMW X3. The contact stated that while at a stop there was an abnormal plastic burning odor coming through the vent. Additionally, the vehicle lost motive power with the check engine warning light illuminated. An independent mechanic was called to her home for maintenance, and the mechanic made minor repairs and reset the computer; however, the failure returned soon after repair. The contact then received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part for the recall repair was not yet available. The contact stated that while picking up her grandson from school, she had attempted to accelerate after placing the vehicle into the park; however, the vehicle stalled. The contact was uncertain if any warning lights were illuminated during the failure. Due to the failure, the contact had the vehicle towed to her home where it remained. Neither the dealer nor the manufacturer had been notified of the failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was unknown. VIN tool confirms parts are not available. (RECALL RELATED INCIDENT) TS

• Nov 28, 2021WI142,381 mi
  Engine · Fuel/propulsion system · Power train
  I am working with a journalist at CNBC to get info about this death trap out since NHTSA is ignoring the issue completely. People are telling you their family members are injured and/or dying because 2008 BMW X3’s simply loose power at 70mph and transmission issues that make this care not…

  I am working with a journalist at CNBC to get info about this death trap out since NHTSA is ignoring the issue completely. People are telling you their family members are injured and/or dying because 2008 BMW X3’s simply loose power at 70mph and transmission issues that make this care not accelerate, jerk, stall, etc. I have been helping contact other owners in an effort to see if they have any unreported issues and many say their complaints were also ignored. when you try to accelerate, the transmission "thinks" about what gear it should be in. the vehicle hesitates, stalls slightly, and creeps along slowly before second gear catches. the rpms are erratic when accelerating. very unpredictable when trying to accelerate. the hesitation is the main issue, especially when trying to pull out of an intersection across traffic. it can become a very scary situation when you want to accelerate and nothing happens. this is an ongoing problem. nothing in particular causes it to happen besides regular acceleration. the problem is intermittent and may disappear while driving. however, it will appear again for no real reason. a software update was performed in mid-july. the problem was still noticeable. on august 3rd, the vehicle was once again brought in for service work. the service manager came along for the drive and noticed the transmission problem. another 2008 bmw x3 that was on the lot was driven under the same driving conditions. the same issues with the transmission were noted. he told me that they will contact bmw to see if there are any service bulletins on how to correct the problem, but was unaware of any fix currently available. after two service calls the problem still persists without any fix as of yet.

• Nov 28, 2021NJCrash
  Electrical system · Engine · Vehicle speed control
  The problem with the 2008 BMW X3 transmission is going to get someone KILLED!! This transmission DOES NOT RESPOND when depressing the accelerator at random times & HAS DONE THIS SINCE THE DAY I BOUGHT IT. it happened once after pulling away from an ezpass booth - the car just froze and would not…

  The problem with the 2008 BMW X3 transmission is going to get someone KILLED!! This transmission DOES NOT RESPOND when depressing the accelerator at random times & HAS DONE THIS SINCE THE DAY I BOUGHT IT. it happened once after pulling away from an ezpass booth - the car just froze and would not accelerate nearly causing an accident. Now it has caused an accident. How are you not doing anything when this has CAUSED DEATHS!!! here is a link to a blog that shows many bmw x3 owners have the problem - some have had their cars replaced by bmw and others have been ignored. this is a serious safety issue that is being ignored by the manufacturer (similar to the toyota issue). please investigate before someone gets killed. http://www.bimmerfest.com/forums/showthread.php?t=262130.

• Mar 23, 2021GA
  Visibility/wiper

  The front passenger window regulator failed making the window not wor and sit in the frame wrong at high speeds it sounds like the window will shatter

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10253326While driving the vehicle on normal roads at10mph and above, a "cracking" sound from the top of the B-pillar(s) is heard.
• 10249437The basic conditions for initializing the power windows are not met.
• 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
• 10247574A noise can be heard from underneath the seat while the seat is being moved either forwards or backwards. This can occur to the drivers and/or the passengers front seat.
• 10244239This situation can result in two customer complaints: 1. Wind noise 2. Excess water entry
• 10225126Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.
• 10225114The front sunroof glass seal has shrunk, creating a gap which can cause wind noise or excess water entry.
• 10224186Component-Specific Limited Warranty Extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Radiator Grille Upper and Lower Active Air Flaps to: 15 years/150,000 miles as determined by the vehicle's original in-service date. 1. Air flap control (link) active, upper (G12, G30 and G32) 2. Air flap control (drive), active, upper 3. Air flaps, upper (assembly) 4. Air flaps, lower (assembly) For eligible MY 2017 BMW 530i (B460) vehicles that are currently registered in the State of California (CA) or a State that has fully adopted the State of California PZEV/SULEV regulation (CT, ME, MD, MA, NJ, NY, RI, and VT), the standard emission-related coverage for the Radiator Front Grille Air Vent Flaps is15 years/150,000 miles. This component-specific limited warranty extension applies to defects in materials or workmanship.' This coverage is subject to the same vehicle eligibility requirements, limitations, and exclusions that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks. A check control message or MIL (Malfunction Indicator Lamp) may be illuminated with faults stored related to the upper and/or lower active air flap(s). Potential causes include: Faulty upper air flap link (G12, G30, G32) Faulty upper air flap actuator (G01, G02, G12, G30, G32) Faulty upper flap assembly (G01, G02, G12, G30, G32) Faulty lower air flap assembly (G01, G02, G12, G30, G32) Software error in the DME affecting the upper flap (G01, G02 only) Or: Upon visual inspection, the passenger side upper active air flaps are either stuck open or closed, and they will not move and there are no faults stored for the active air flaps (With no check control message or check engine light or displaying)
• 10224185Component-Specific Limited Warranty Extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Leak Diagnosis Module with hose assembly (NVLD, shown) to: 15 years/150,000 miles as determined by the vehicle's original in-service date. For eligible MY 2017 BMW 530i Sedan and xDrive (B460) vehicles that are currently registered in the State of California (CA) or a State that has fully adopted the State of California PZEV/SULEV regulation (CT, ME, MD, MA, NJ, NY, RI, and VT), the standard component-related coverage for the NVLD is 15 years/150,000 miles. This component-specific limited warranty extension applies to defects in materials or workmanship. This coverage is subject to the same vehicle eligibility requirements, limitations, and exclusions that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks. Over time, the Leak Diagnosis Module (NVLD) (with connected hose) component material may fail, this can create a fine leak to develop in the Evaporative Emission Control System (EVAP). Should this occur, corresponding fault codes will be stored in the DME memory and the MIL (Malfunction Indicator Lamp) will illuminate.
• 10218420The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via Voice over LTE (VoLTE) function. For this purpose the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
• 10218413BMW AG has issued a Delivery Stop (effective March 28, 2022) on certain Model Year 2022 BMW vehicles that were produced between March 1, 2022 and March 8, 2022 because the torsion struts may not have been installed at the plant. Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop, until the vehicle is repaired. Do not use or sell replacement equipment/parts subject to a Delivery Stop.
• 10218384Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.
• 10218381A check control message for the restraint system appears. In the instrument cluster, the red air bag warning light lights up permanently. One of the following fault codes is stored in the ACSM (air bag control unit): 930949 - Knee airbag, driver: short circuit to negative terminal 93094F - Knee airbag, front passenger: short circuit to negative terminal.
• 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
• 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
• 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
• 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
• 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
• 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
• 10154816In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
• 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
• 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
• 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
• 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
• 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
• 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
• 10150160State Inspection and Emission (I/M) Test Fails Due To an Invalid VIN Number. The customer of an affected vehicle may fail to pass an I/M test due to a non-compliant 17digit vehicle identification number (VIN) stored in the DME (Digital Motor Electronic). The VIN read out and displayed on the state test printout does not match the actual VIN of the vehicle. If the DME was reprogrammed using the previously available BMW service equipment (e.g., Progman, GT1), it is possible that only the last 7 digits of the VIN were entered into the DME, and positions 4 through10 may only contain default characters. For example: The state I/M tester or OBD scan tool may read out WBAAA00000A123456 instead of the correct full 17-digit VIN, WBAZZ03492A123456.
• 10150095Intermittent Hydraulic Valve Adjuster (HVA) Noise. An occasional ticking or rattling noise from the camshaft hydraulic valve lifters (HVA) may occur during cold engine starts, due to frequent short-distance driving, or the noise may occur for an extended period of time even though the engine is at operating temperature. Improved parts were phased into production beginning on 10/1/2008 and fully implemented on November 31st 2008.
• 10150039"?Panoramic Sunroof Repair Instructions. INFORMATION Sunroof Repair Instructions: The panoramic sunroof contains several ""mechanism sets"" which can be repaired and/or replaced independently in the event of a mechanical failure. When performing such a repair to any of these sets, the TIS/ISTA Repair Instructions (REP) should always be consulted. Due to the complex nature of these repairs, a set of complementary instructions with additional detail, explanation, and photos has been developed. The attached Repair Instructions should always be used in conjunction with the TIS/ISTA REP. "
• 10149603"Panoramic Sunroof Repair Instructions. INFORMATION Sunroof Repair Instructions: The panoramic sunroof contains several ""mechanism sets"" which can be repaired and/or replaced independently in the event of a mechanical failure. When performing such a repair to any of these sets, the TIS/ISTA Repair Instructions (REP) should always be consulted. Due to the complex nature of these repairs, a set of complementary instructions with additional detail, explanation, and photos has been developed. The attached Repair Instructions should always be used in conjunction with the TIS/ISTA REP. Refer to the following repair attachments: Front Glass Mechanism repair E53, E61, E70, E83, E91.pdf Rear Glass Mechanism repair E53, E61, E70, E83, E91.pdf Wind Deflector Mechanism repair E53, E61, E70, E83, E91.pdf Sunshade Mechanism repair E53, E61, E83.pdf Sunshade Mechanism repair E70, E91.pdf All panoramic roofs for the above-listed models are conceptually similar and utilize similar repairs. NOTE: An E83 (X3) sunroof cassette is used for demonstration of the repairs. Some differences may exist between this and other models. The following prerequisite work is required in order to replace the following kits (in addition to removing the cassette from the car and glass from the cassette): Front Glass Mechanism - None. Rear Glass Mechanism - Remove the front glass mechanism. Wind Deflector Mechanism - Remove the front glass mechanism; remove the rear glass mechanism. Sun shades and Shade Mechanism - None Sunroof Mechanical 3D Animation: A 3D animation has been developed in order to clarify how the sunroof mechanism operates, as well as how it is assembled and disassembled. To view this animation, open Interactive Career Pathways (ICP) and select ""Replace Front and Rear Glass Panel Mechanic"" from the Technical Service Information section of the home page. This animation allows you to: * Operate the mechanism and view from any angle; * Add or remove parts and then cycle the sunroof; * S
• 10149557For the above-referenced vehicles with driver?s side airbag modules, BMW of North America, LLC (?BMW NA?) will provide a Customer Support Program as outlined in the Takata Settlement Customer Support Program Overview attachment. This ?component-specific? customer support program applies only if there is a defect in materials or workmanship of the Takata driver?s side airbag module in a listed vehicle.
• 10149279Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Analysis of FASTA data and repeat repair visit reports indicates that there are many fault codes that are stored in the above vehicles, but they are not diagnosed to identify their root cause. Fault codes that are not diagnosed to find their root cause can lead to a repeat repair visit to the workshop by the customer. Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
• 10148273Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting
• 10148120Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shut
• 10148087External Engine Oil Leaks and Repairs. During the vehicle's operational life, normal engine oil seepage or sweating, in addition to accumulated road dust, dirt and grime in the engine compartment can cause the appearance of a more severe oil leak. This is further exaggerated by residual oil that remains on the engine assembly after maintenance services are performed, e.g., oil filter changes, "engine oil top-offs," etc. If this visual appearance of accumulated oil on the engine assembly as an "active leak" is misinterpreted, unnecessary gasket repairs/replacements will result. Specifically, our analysis of the claim-related data for vehicles equipped with the engines noted in this bulletin is showing an above-average number of engine gasket repair/replacement claim submissions. The purpose of this bulletin is to provide your workshop with information and a procedure that will help in identifying engine oils leaks that do and do not require a repair.
• 10147930GM6 - 6L45R: Diagnostic Procedure for Shudder or Vibration Issues. A shudder or vibration can be felt under light acceleration or when driving at constant suburban speeds. This can be most noticeable in the 1700 - 2200 engine rpm range while in 3rd through 6th gears. No faults are stored in the EGS module. CAUSE Changes in the frictional properties of the automatic transmission fluid over time can lead to momentary slipping of the torque convertor lock-up clutch.
• 10147758This Service Information bulletin supersedes SI B07 03 14 dated May 2015. designates changes to this revision SUBJECT Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
• 10147241Shudder from the Driveline on Vehicles with xDrive. There is a shudder or vibration from the driveline when taking off from a stop, or when accelerating at highway speeds. CAUSE Possible multiple root causes related to the engine, wheels & tires, suspension components or internal wear on the clutch plates of the xDrive transfer case.
• 10147136Valve Stem Replacement with Wheel Electronics. INFORMATION The valve stems are single-use only, and must be replaced every time the wheel electronics are replaced. If you loosen the nut (1), you must replace the valve stem. Failure to replace the valve stem will lead to a pressure leak. The proper repair procedure can be found in REP 3611533. Not applicable. [ Copyright (c)2015 BMW of North America, Inc. ] Page 1 of 3 Page 1 of 1 https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/232...6/4/2015 https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/232...6/4/2015 Page 1 of 3 https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/232...6/4/2015
• 10147123Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Analysis of FASTA data and repeat repair visit reports indicates that there are many fault codes that are stored in the above vehicles, but they are not diagnosed to identify their root cause. Fault codes that are not diagnosed to find their root cause can lead to a repeat repair visit to the workshop by the customer. Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.

Every BMW X3 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.