2020 BMW X3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2020 BMW X3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
16 recalls name the 2020 BMW X3. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 BMW 330i, 2019-2022 BMW Z4, 2020-2022 BMW 530i, X3, X4, Toyota Supra, 2021-2022 BMW 430i, 430i Convertible, and 2022 BMW 230i vehicles. The engine starter relay may corrode, causing the relay to overheat and short circuit.
Risk and remedy
Risk
A short circuit in the starter relay may increase the risk of a fire.
Remedy
Owners are advised to park their vehicles outside and away from structures until the remedy is complete. Dealers will replace the engine starter, free of charge. Owner notification letters were mailed February 6, 2026. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov November 14, 2025.
BMW of North America, LLC (BMW) is recalling certain 2018-2022 X3 sDrive30i, X3 xDrive30i, X3 M40i, and X3 M vehicles. The attachment for the rear cargo rail may become damaged in a rear crash and result in the cargo rail detaching.
Risk and remedy
Risk
Interior rear cargo rail detachment during a crash can increase the risk of injury.
Remedy
Dealers will replace the rear cargo rail attachment bolts, free of charge. Owner notification letters were mailed December 12, 2024. Owners may contact BMW customer service at 1-800-525-7417. Vehicles in this recall were previously remedied for this issue under recall number 24V-534 and will need to have the new repair completed.
BMW of North America, LLC (BMW) is recalling certain 2018-2023 X3 sDrive30i, X3 xDrive30i, X3 M40i, and X3 M vehicles. The attachment for the interior cargo rail may become damaged in a rear crash and result in the cargo rail detaching.
Risk and remedy
Risk
Interior cargo rail detachment during a rear crash can increase the risk of injury.
Remedy
Dealers will replace the rear cargo rail attachment bolts, free of charge. Owner notification letters were mailed January 2, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 330i, 330i xDrive, M340i xDrive, 2020-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, 2021 X3 xDrive30e, X4 xDrive30i, and X4M vehicles. The seat frame may not have been welded properly to the seat rails.
Risk and remedy
Risk
An improperly welded seat frame may not properly restrain the occupant during a crash, increasing the risk of injury.
Remedy
Dealers will replace the seat frame and back rest, free of charge. Owner notification letters were mailed May 22, 2023. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 M340i, M340i xDrive, 540i, 540i xDrive, X3 M40i, 2020-2021 X4 M40i, 745Le xDrive, 2019-2021 Z4 M40i, and 2020-2021 Toyota Supra vehicles. During engine start, the engine management software may cause loss of braking assist. Full mechanical braking (without assist) remains available.
Risk and remedy
Risk
Loss of braking assist can increase the risk of a crash.
Remedy
Dealers will update the engine management software, free of charge. Owner notification letters were mailed on September 17, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, X4 xDrive30i, X4 M40i, M550i, X4M, X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5M, X5 M50i, X7 xDrive40i, X7 xDrive50i, X7 M50i, Alpina XB7, 330i, 330i xDrive, M340i, M340i xDrive, and 8 Series Coupe, Convertible and Grand Coupe, 840i, 840i xDrive, M850i…
Risk and remedy
Risk
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury.
Remedy
BMW will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began April 16, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020-2021 X3 sDrive 30i, X3 xDrive 30i, X3M 40i, X3 xDrive 30e, X4 xDrive 30i, X4M 40i, 530i, 540i, 540i xDrive, M550i xDrive, M5, 550e, 550e xDrive, and 550e iPerformance vehicles. A small portion of the rearview image may be slightly obscured. As such, these vehicles fail to comply with the…
Risk and remedy
Risk
If the driver relies on only the rearview camera image, the reduced rearview image view can increase the risk of a crash or injury.
Remedy
BMW will notify owners, and dealers will inspect and, if necessary, program the rearview camera with updated software. The recall began November 18, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020-2021 530e, 530e xDrive, 530e iPerformance and X3 xDrive30e and MINI Cooper Countryman All4 SE, 2020 BMW i8, and 2021 330e, 330e xDrive, 745Le xDrive and X5 xDrive45e vehicles. Debris may have entered one or more of the hybrid battery cells during their production.
Risk and remedy
Risk
The debris could result in a short-circuit, increasing the risk of fire or injury.
Remedy
BMW will inspect and, if necessary, replace the battery module free of charge. The remedy is currently being developed. Until the remedy is completed, drivers are instructed to not charge their vehicles. Drivers are instructed to not drive in manual mode, sport mode, and to not use the shift paddles. Owners were notified of the safety risk October 23, 2020. The recall began November 24, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2021 330e and X5 xDrive45e, 2020-2021 X3 xDrive30e, and 2020 MINI Countryman SE ALL4 vehicles. Loose welding beads may form a conductive path between the hybrid battery cells which could lead to a short-circuit.
Risk and remedy
Risk
A short-circuited hybrid battery may increase the risk of a fire.
Remedy
BMW will notify owners, and dealers will inspect and, if necessary, replace the battery modules, free of charge. BMW issued owners an interim notification on October 16, 2020. Although potentially affected BMW owners received interim owner notification letters, all potentially affected BMW owner vehicles have been remedied; therefore, BMW Final owner notification letters will not be necessary. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 X3 sDrive40i, X3 xDrive40i and X3M40i vehicles. These vehicles were not programmed with rearview camera software during assembly, therefore, when the transmission is shifted to reverse, a rearview image is not displayed. As such, these vehicles fail to comply with the requirements of Federal Motor…
Risk and remedy
Risk
An inoperative rearview camera display can increase the risk of a crash when reversing.
Remedy
BMW will notify owners, and dealers will program the affected vehicles with rearview camera software, free of charge. The recall began August 14, 2020. All vehicles have been remedied as of November 9, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019 Z4 sDrive30i, 2019-2020 330i xDrive, M340i and M340i xDrive, 2020 X3M and X4M, and Toyota Supra vehicles. In certain driving conditions, such as high temperatures and rough road surfaces, a steering gear tie rod may become damaged, possibly resulting in a fractured tie rod.
Risk and remedy
Risk
A damaged or fractured tie rod may affect vehicle handling and control, increasing the risk of a crash.
Remedy
BMW and Toyota will notify owners, and dealers will replace the steering gear tie rods, free of charge. The recall began August 14, 2020. Owners may contact BMW customer service at 1-800-525-7417 or Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2020 X3 xDrive30e, X4 xDrive30i, X4 M40i, X4M, 330i, 330i xDrive, M340i, 840i Gran Coupe, 840i xDrive Gran Coupe, M850i xDrive Gran Coupe, M8 Gran Coupe, X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, and 840i xDrive Convertible vehicles. The sensors in the front seat belt buckles may inaccurately detect a…
Risk and remedy
Risk
If the air bag and/or seat belt pretensioners deploy improperly in the event of a crash, there is an increased risk of injury to the driver and front passenger.
Remedy
BMW will notify owners, and dealers will inspect and replace the front seat belt buckles, as necessary, free of charge. The recall began May 18, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2020 X4 xDrive30i and X4 M40i, and 2018-2020 X3 sDrive30i, X3 xDrive30i, X3 M40i, and X3M vehicles. The instrument panel casing may not have been tightened properly to the passenger air bag.
Risk and remedy
Risk
In the event of a crash necessitating air bag deployment, the air bag could damage the instrument panel and cause small pieces of the panel to strike the driver or other occupants, increasing the risk of injury.
Remedy
BMW will notify owners, and dealers will replace the instrument panel casing, free of charge. The recall began May 15, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 BMW X3 M40i and X4 M40i vehicles. The steering rack pinion teeth may break under load, resulting in a loss of steering control.
Risk and remedy
Risk
A loss of steering control increases risk of a crash.
Remedy
BMW has notified owners, and dealers will replace the steering gear, free of charge. The recall began October 9, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018 540d, 2018-2020 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 530e, 530e xDrive, X3 sDrive, X3 xDrive, X3 M40i, X3 M, and 2019-2020 X4 xDrive, X4 M40i, X4 M, X7 xDrive, X7 M50i, 740Li, 740Li xDrive, 750Li, 750Li xDrive, 8 Series Convertible and Coupe 840i, 840i xDrive, M850i xDrive, X5…
Risk and remedy
Risk
The lack of an image in the back-up camera display increases the risk of a crash.
Remedy
BMW will notify owners, and dealers will update the back-up camera software, free of charge. The recall began November 8, 2019. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce at 1-877-877-3735. Toyota owners may contact Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2020 X3 sDrive30i, X3 xDrive30i, and X3 M40i vehicles, X4 xDrive30i, and X4 M40i vehicles. The front axle swivel bearings may not have been properly heat treated during manufacturing, reducing their strength and possibly causing them to break.
Risk and remedy
Risk
Broken swivel bearings can cause a loss of vehicle control, increasing the risk of a crash.
Remedy
BMW has notified owners and instructed them to not drive their vehicles. Dealers will replace the front axle swivel bearings, free of charge. Owners may contact BMW customer service at 1-800-525-7417.
Owner complaints
110 complaints2 involved a crash6 involved a fire
What owners report most
Latest complaints
- Engine
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating…
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. BMW has actively removed the plastic part number out of all dealer networks. Failures have been reported across multiple production years, and affected vehicle population boundaries remain unclear. Because this condition can result in sudden vehicle disablement without adequate warning especially in the cold, I believe this issue warrants investigation as a potential safety-related defect.
- Electrical system · Unknown or other · Visibility/wiper
I am reporting a chronic manufacturing defect on my 2020 BMW X3 that poses an immediate electrical short-circuit and vehicle safety hazard. The passenger-side panoramic sunroof drainage system/roof structure leaks water heavily through the side panel joint of the door frame, directly saturating the…
I am reporting a chronic manufacturing defect on my 2020 BMW X3 that poses an immediate electrical short-circuit and vehicle safety hazard. The passenger-side panoramic sunroof drainage system/roof structure leaks water heavily through the side panel joint of the door frame, directly saturating the front passenger floor carpet. This issue has been ongoing since I received the vehicle in 2020.The vehicle has been brought to Kelly BMW of Columbus, Ohio, at least four separate times since 2020 specifically to address this leak. Technicians have replaced outer seals and cleared tracks, but the leak persists, and on the last visit, unqualified dealership staff claimed they "could not find anything wrong. "This is a severe safety risk: BMW places the primary electronic fuse blocks and vital vehicle wiring harnesses directly underneath the front passenger floorboard carpet. Constant water logging in this exact area threatens to cause sudden, catastrophic electrical failures, component shorts, or vehicle stalling while driving. The manufacturer has failed to issue a recall for this known, widespread G01 platform defect, and dealership service centers lack the training to properly diagnose it.
- Electrical system · Fuel system, diesel
The contact owns a 2020 BMW X3. The contact stated that while driving 25 MPH, the message “Heat Management Module Malfunction” was displayed and the warning light was illuminated. The drive-train warning light was illuminated. Upon research, the contact became aware of NHTSA Campaign Number…
The contact owns a 2020 BMW X3. The contact stated that while driving 25 MPH, the message “Heat Management Module Malfunction” was displayed and the warning light was illuminated. The drive-train warning light was illuminated. Upon research, the contact became aware of NHTSA Campaign Number: 21V586000 (Fuel System, Diesel). The vehicle was previously taken to the dealer to be diagnosed, and the contact was informed that the high-pressure fuel pump needed to be replaced. The vehicle was repaired, but the failure reoccurred. The manufacturer was contacted, but no additional assistance was provided due to a prior good-faith repair being provided. The failure mileage was approximately 70,000.
- Engine · Power train · Vehicle speed control
Heat Management Module HMM is bad. BMW used a plastic part that is right up against the engine block. This HMM Heat Management Module resulted in STOPPING the vehicle completely in the middle of the freeway. I had no control. Then the car drove, then stopped again. I had NO CONTROL over the…
Heat Management Module HMM is bad. BMW used a plastic part that is right up against the engine block. This HMM Heat Management Module resulted in STOPPING the vehicle completely in the middle of the freeway. I had no control. Then the car drove, then stopped again. I had NO CONTROL over the vehicle. Weeks later the Drivetrain Malfunction warning light appeared as i was driving home late at night from the ER. I took it to my BMW dealer. The diagnostic test was performed and was told the Heat Management Module HMM needed to be replaced at a cost to me of $3000. I contacted BMW USA, explained what transpired and they responded with a denial. I stopped driving the car completely after i found other complaints about BMW using an inferior part on the 3 series and the same issue about the car stopping in highway traffic without any control. I later got my BMW repaired, at the BMW dealer, as i could not afford to buy another car. I have the defective inferior part in my possession for inspection by NHTSA. BMW refuses to recall the Heat Management Module HMM and will not address the Drivetrain Malfunction warning light. I would like this to be escalated and investigated by NHTSA.gov so that others may be safe when driving please. Thank you.
- Engine
I own a 2020 BMW X3 M40i, VIN [XXX], manufactured November 2019, now at approximately 100,000 miles, equipped with the B58TU engine. My oil level sensor stopped completing measurements at approximately 45,000 miles, a known precursor to thermoplastic oil pump failure. For 55,000 miles I had no way…
I own a 2020 BMW X3 M40i, VIN [XXX], manufactured November 2019, now at approximately 100,000 miles, equipped with the B58TU engine. My oil level sensor stopped completing measurements at approximately 45,000 miles, a known precursor to thermoplastic oil pump failure. For 55,000 miles I had no way to identify whether my vehicle contained the defective component because BMW removed the original thermoplastic part number from all dealer networks. VIN-based lookup now falsely returns updated metal component information regardless of what is physically present in the vehicle. This makes proactive identification impossible for both owners and dealers, meaning the defect cannot be remediated even by willing owners. I had no actionable path forward. On [XXX] I was driving on a Florida highway at 80 mph when a low oil pressure warning appeared. I pulled over immediately. A fault log pulled at 2:05PM showed code 1C3002. A second log pulled at 6:49PM after briefly running the engine showed three additional oil system faults including 1C2002 - engine oil pump pressure too low - indicating active progressive failure within hours. This failure occurred in 90 degree Florida summer heat, not cold weather. If NHTSA’s investigation is scoped around cold climate failures, my case demonstrates that scope is incomplete and the affected population is broader than currently documented. Carfax records confirm 18 total service records over 100,000+ miles, including 8 dealer visits between 18,000 and 50,000 miles under active CPO warranty. This vehicle has been consistently and properly maintained throughout its life. The vehicle became a safety hazard at highway speed without adequate warning. I will file a second complaint after physical inspection confirming which pump variant is actually present. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine
reporting a safety issue with BMW vehicles equipped with the B58TU engine, primarily 2019-2021 models. These vehicles have an oil pump with an internal plastic component that regulates oil pressure, and this part is fracturing in the field, causing sudden loss of oil pressure. The failure typically…
reporting a safety issue with BMW vehicles equipped with the B58TU engine, primarily 2019-2021 models. These vehicles have an oil pump with an internal plastic component that regulates oil pressure, and this part is fracturing in the field, causing sudden loss of oil pressure. The failure typically occurs during cold starts in low temperatures. When it fails, oil pressure becomes erratic or is lost entirely, often with little to no warning before engine damage or vehicle disablement. Warning signs, when present, include inability to measure oil level electronically, abnormal oil pressure, or sudden drivetrain malfunction warnings. These can rapidly progress to engine shutdown or severe damage from oil starvation. This creates a dangerous situation because the vehicle can become disabled without warning while driving or after startup. This is especially hazardous when cars become immobilized in traffic or during winter conditions when failures occur most frequently, leaving occupants exposed to freezing temperatures while awaiting assistance. Pump replacement requires extensive disassembly and commonly costs $6,000-$8,000, assuming no engine damage. A critical concern: owners cannot determine if their vehicle has the original plastic pump or the later metal revision. BMW's VIN-based parts lookup now shows updated components even when original plastic parts remain installed, and BMW has removed the original plastic part number from dealer networks entirely. Failures are reported across multiple production years, and the scope of affected vehicles remains unclear. Because this condition causes sudden vehicle disablement without adequate warning, especially in cold weather, I believe this warrants investigation as a potential safety-related defect.
- Electrical system
The contact owns a 2020 BMW X3. The contact stated that while driving at an undisclosed speed, the drivetrain warning light illuminated on the instrument panel, causing the vehicle to jerk and run rough. The vehicle was taken to the dealer, where it was diagnosed with a heat management module failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 53,404.
- Electrical system · Engine
The contact owns a 2020 BMW X3. The contact stated that after parking the vehicle and turning the engine off, approximately 10 minutes later a burning rubber odor was present inside the cablin of the vehicle and smoke was present coming from under the hood. The contact opened the hood discovered…
The contact owns a 2020 BMW X3. The contact stated that after parking the vehicle and turning the engine off, approximately 10 minutes later a burning rubber odor was present inside the cablin of the vehicle and smoke was present coming from under the hood. The contact opened the hood discovered flames coming from the engine. The fire and police departments were called to the scene and the fire was extinguished the flame. During the incident the vehicle destroyed and later lowed away. A fire and police report was taken. No injuries were reported. The cause of the fire was not yet determined. The manufacturer was notified of the incident. The local dealer was not contacted. The contact was informed that the VIN was not included in the NHTSA Campaign Number: ( ). The contact indicated that the vehicle had experienced that same failure listed in the recall. The failure mileage was 65,000.
- Electrical system · Engine · Fuel/propulsion system
I am submitting this complaint regarding ongoing and potentially dangerous mechanical failures involving my vehicle that have repeatedly occurred despite numerous repair attempts by the dealership. Over the past year, I have taken my vehicle to the dealership more than 10 times for serious…
I am submitting this complaint regarding ongoing and potentially dangerous mechanical failures involving my vehicle that have repeatedly occurred despite numerous repair attempts by the dealership. Over the past year, I have taken my vehicle to the dealership more than 10 times for serious recurring issues. The problems have included: Drivetrain malfunction warnings Engine warning lights Oil leaks Smoke coming from the vehicle The vehicle unexpectedly shifting into neutral while driving Sudden loss of drivability requiring the vehicle to be towed The dealership has repeatedly stated that the issues were repaired, and at one point even provided a one-year warranty on the repair work. Despite this, the same problems have continued to occur. Most recently, the drivetrain malfunction warning and engine light returned again, smoke came from the vehicle, and the car shifted into neutral on its own, becoming completely undriveable and requiring towing. I have spent more than $10,000 on repairs related to these ongoing issues, yet the vehicle remains unreliable and unsafe. My primary concern is the safety risk posed by the drivetrain failure and the vehicle unexpectedly shifting into neutral while in operation. I am requesting that this matter be reviewed as a potential vehicle safety issue. I believe these repeated failures may present a serious risk not only to myself but potentially to other drivers as well. Thank you for your attention to this matter.
- Electrical system
The contact owns a 2020 BMW X3. The contact stated while driving at an undisclosed speed, the brake pedal was released, the auto start feature failed to function as intended. The vehicle was taken to the dealer where it was diagnosed with a failed engine starter. The contact was informed that the…
The contact owns a 2020 BMW X3. The contact stated while driving at an undisclosed speed, the brake pedal was released, the auto start feature failed to function as intended. The vehicle was taken to the dealer where it was diagnosed with a failed engine starter. The contact was informed that the engine starter needed to be replaced. The vehicle was not repaired. The contact referenced a recall, NHTSA Campaign Number: 25V636000 (Electrical System) however the contact's VIN was not associated. The manufacturer was made aware of the failure. The contact was advised to contact the NHTSA Hotline and report the failure. The failure mileage was approximately 55,000.
- Unknown or other
While stopped at a red light, my front sunroof panel exploded/shattered. My brother and I heard a loud bang. No object hit the sunroof. It was visible that the glass was bubbled outward. And, the 4 corners had cracking. Lucky the roof liner was closed and no glass hit us.
- Air bags · Seats
The heated seat element had a runway incident that caused the seat to smoke and burn a hole through multiple layers and ultimately damaging the airbag sensor mat disabling the passenger airbag system
- Fuel/propulsion system
It has come to my attention that liquid from the Positive Crankcase Ventilation (PCV) system may leak onto the water pump electrical connector. This condition can lead to an electrical short circuit and, in rare cases, may increase the risk of a vehicle fire. This issue presents a serious safety…
It has come to my attention that liquid from the Positive Crankcase Ventilation (PCV) system may leak onto the water pump electrical connector. This condition can lead to an electrical short circuit and, in rare cases, may increase the risk of a vehicle fire. This issue presents a serious safety concern for vehicle owners and others on the road. A failure of this nature, especially one that carries a fire risk, warrants immediate review and corrective action. I respectfully request that NHTSA investigate this matter and determine whether a safety recall is necessary to address this defect. The dealership noticed the leak beginning at the weep hole of the waterpump. No incident occurred this is for preventive measures and review for recall and reimbursement
- Back over prevention › Sensing system › Camera · Forward collision avoidance › Warnings · Lane departure › Warning
Due to a TSB (SIB 65 12 22) wherein the roof antennae leaks water and causes a short in the telemetry module, the car does not have pedestrian warning, navigation or backup camera / cross traffic warning. The car is drivable, but compromised from a safety perspective.
- Electrical system
The contact owns a 2020 BMW X3. The contact received notification of NHTSA Campaign Number: 25V636000 (Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2020 BMW X3. The contact received notification of NHTSA Campaign Number: 25V636000 (Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that the part to do the recall repair was not available. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
- Electrical system
The contact owns a 2020 BMW X3. The contact stated that upon starting the vehicle, there was an abnormal thumping sound coming from the vehicle. There was no warning light illuminated. The contact later received notification of NHTSA Campaign Number: 25V636000 (Electrical System); however, the part…
The contact owns a 2020 BMW X3. The contact stated that upon starting the vehicle, there was an abnormal thumping sound coming from the vehicle. There was no warning light illuminated. The contact later received notification of NHTSA Campaign Number: 25V636000 (Electrical System); however, the part to do the recall repair was not yet available. The vehicle was taken to a local dealer, and the contact was informed to leave the vehicle at the dealer overnight. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The vehicle was not repaired. The failure mileage was approximately 60,000.
- Unknown or other
I am submitting a formal safety complaint regarding a defect in my 2020 BMW X3 that has resulted in the failure of a critical emergency safety system. The vehicle displayed an error message indicating an “Emergency Call System Malfunction.” I brought the vehicle to BMW of Murrieta on March 30…
I am submitting a formal safety complaint regarding a defect in my 2020 BMW X3 that has resulted in the failure of a critical emergency safety system. The vehicle displayed an error message indicating an “Emergency Call System Malfunction.” I brought the vehicle to BMW of Murrieta on March 30, 2026, for diagnosis and repair. Upon inspection, the service center determined that the Telematic Control Unit (TCU) had sustained water damage. This damage was attributed to water intrusion originating from the vehicle’s shark fin antenna. This is a known issue documented by BMW in internal Service Information Bulletin SIB 65 12 22 (dated October 5, 2022). Despite acknowledgment of this known defect, BMW declined to cover the repair costs for both the antenna-related water intrusion and the resulting damage to the TCU. This failure presents a significant safety hazard. The emergency call system is designed to automatically notify emergency services in the event of a collision. With this system inoperable, occupants may be unable to receive timely emergency assistance, increasing the risk of serious injury or death. Given that BMW is aware of this defect and its potential to disable a critical safety feature, I believe this issue warrants further investigation and should be considered for a mandatory safety recall.
- Engine
This recall was in September 2025, and for a starter issue that could cause a fire. Despite the urgency of this recall, it's now six months later, and I am still getting a response from BMW "Remedy Not available". So, in the meantime BMW advises to keep the car outside in the hot Florida sun so…
This recall was in September 2025, and for a starter issue that could cause a fire. Despite the urgency of this recall, it's now six months later, and I am still getting a response from BMW "Remedy Not available". So, in the meantime BMW advises to keep the car outside in the hot Florida sun so it doesn't burn the house down. This is a totally unacceptable situation, and I would appreciate the NHTSA following up with BMW regarding why the delay. It appears to me that BMW is dragging their feet on correcting this serious issue.
- Fuel/propulsion system
We had an oil pump failure that was because the part was plastic, not metal.
- Engine
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating…
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. Owners are currently unable to determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version utilizing metal internal components, as VIN-based parts information now identifies updated components in the car even when no replacement has occurred and the old components are actually in the car. Also, BMW has actively removed the plastic part number out of all dealer networks as well. They are aware.
- Seat belts
The contact owns a 2020 BMW X3. The contact stated that while her son was using the rear passenger's side seat belt, the contact became aware that the seat belt was fraying. The vehicle was taken to the dealer and was provided an estimate for the seat belt replacement. The vehicle was not repaired due to the cost. The manufacturer was not notified of the failure. The failure mileage was approximately 49,000.
- Engine · Fuel/propulsion system · Unknown or other
Component Failed: Engine starter relay and starter motor assembly. The vehicle stalled in traffic and ignited upon a restart attempt. The vehicle is a total loss, currently held by [Insurance Co] at [Location/Lot #], and is available for inspection. Safety Risk: The driver’s life was at immediate…
Component Failed: Engine starter relay and starter motor assembly. The vehicle stalled in traffic and ignited upon a restart attempt. The vehicle is a total loss, currently held by [Insurance Co] at [Location/Lot #], and is available for inspection. Safety Risk: The driver’s life was at immediate risk. The vehicle stalled in active traffic, creating a collision hazard, followed by a rapid, uncontrollable engine fire. The driver suffered smoke inhalation and severe trauma while escaping. A delayed exit would have been fatal. Confirmed by Dealer: The failure mirrors the defect pattern in Recall 25V-636 (Starter Relay Corrosion). While the fire prevents reproduction, the vehicle had a consistent service history with no prior electrical issues. Inspected By: The vehicle was inspected by [Insurance Co] and declared a total loss. [Optional: The Fire Dept. responded under Report #[Number]]. BMW was formally notified via demand letter on [Date]. Warning Lamps/Symptoms: No prior warnings. The failure was acute. A "Drivetrain Malfunction" message appeared seconds before the stall. Smoke and flames appeared immediately upon the attempted restart.
- Engine
I am reporting a driver safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine in model years 2019–2021. These engines use a variable-displacement oil pump containing an internal thermoplastic adjusting component that regulates oil pressure. Field failures show…
I am reporting a driver safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine in model years 2019–2021. These engines use a variable-displacement oil pump containing an internal thermoplastic adjusting component that regulates oil pressure. Field failures show this component can fracture, causing sudden loss or instability of engine oil pressure. Failures most commonly occur during cold starts in low temperatures, it can occur at any time or temperature. When the part breaks, oil pressure becomes erratic or is lost entirely. Drivers often receive little or no actionable warning before the vehicle shuts down or suffers severe engine damage. Precursor symptoms may include inability to measure engine oil level electronically, abnormal oil pressure behavior, or sudden drivetrain malfunction alerts. In many cases, the condition rapidly progresses to engine stall or mechanical failure due to oil starvation. Loss of lubrication can disable the vehicle without warning while driving or shortly after startup. This creates a serious safety hazard, especially if the vehicle stalls in active traffic. The risk is heightened in winter conditions—when failures occur most often—because occupants may be stranded in freezing temperatures while awaiting assistance. Repair requires major disassembly, and oil pump replacement alone commonly exceeds $6,000–$8,000, excluding additional engine damage Owners cannot reliably determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version with metal internal components. VIN-based parts systems now default to the updated design even if no replacement has occurred, and the original plastic component part number has reportedly been removed from dealer networks. This lack of transparency prevents owners from assessing their risk. I believe this represents a known manufacturer defect with direct driver safety implications that warrants formal investigation
- Engine
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating…
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. Owners are currently unable to determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version utilizing metal internal components, as VIN-based parts information now identifies updated components in the car even when no replacement has occurred and the old components are actually in the car. Also, BMW has actively removed the plastic part number out of all dealer networks as well. A recall should happen
- Engine · Fuel/propulsion system · Power train
Oil pump failures have been reported across multiple production years, and affected vehicle population boundaries remain unclear. Because this condition can result in sudden vehicle disablement without adequate warning especially in the cold, I believe this issue warrants investigation as a…
Oil pump failures have been reported across multiple production years, and affected vehicle population boundaries remain unclear. Because this condition can result in sudden vehicle disablement without adequate warning especially in the cold, I believe this issue warrants investigation as a potential safety-related defect. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11012074the NVLD limited emissionrelated warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles as determined from the original in-service date.
- 11012067The NVLD limited emission related warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles as determined from the original in-service date.
- 11012066The NVLD limited emission related warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles as determined from the original in-service date
- 11009427The customer states that one or more of the following situations may occur: 1. The availability of the Steering and Lane Control Assistant is deteriorating, and/or that the function allows thevehicle to move from side to side within the lane markings. 2. The parking space detection is less effective or hardly ever receives any parking space recommendations fromthe PMA.
- 11008994Delivery stop: rear cargo rails
- 10253326While driving the vehicle on normal roads at10mph and above, a "cracking" sound from the top of the B-pillar(s) is heard.
- 10252033During inspection and/or diagnosis there is noticeable dirt/grease buildup on the axles near the inner and/o router CV boots.
- 10252031One or more of the LED daytime running lights are dim or discolored.
- 10250374An interference noise (groaning noise) can be heard from within the heating and air-conditioning unit in thecenter of the instrument panel. The groaning noise always occurs when either a ventilation flap, air stratification flap or the recirculated airflap moves to a different position. Due to the complex design of the heating and air-conditioning unit, the kinematics causing it (top or bottom,left or right) may not be able to be precisely located. Depending on the vehicle model, the number of servomotors (and the associated kinematics unit) varies.Various models use either 2 or 3 servomotors.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249425The Check Control message below appears even though the coolant level is not below minimum when theengine is cold. Check Control message (ID 166): Top up coolant.
- 10249032The Central Information Display goes black intermittently due to resets of the Head Unit (HU-H3). FaultB7F8F9 HU-H: Reset will be stored in the HU-H3.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10249024This bulletin outlines known areas of possible water entry, operational noise, or wind noise for the vehicles listed above. It serves only as a diagnostic resource in troubleshooting complaints from the roof area. This bulletin and the associated attachments are designed to provide one single diagnostic resource for troubleshooting all known issues related to the panoramic sunroof of BMW Sports Activity Vehicles which have quality improvement measures already in place.
- 10249018At low outside temperatures (below 40 degrees F) and slow driving speeds (i.e. when parking, maneuvering)with a large steering angle, the front end can be slightly axially misaligned. This can be felt (jerking)/ heard via an acoustic acknowledgement (clunk) as seen at the 11 second mark of the video. See attached video V36 01 21.
- 10249016With the vehicle is on a lift and the front struts are in the extended position, there may be a cracking and orclicking type noise when turning the steering wheel left/right. See attached video V31 01 24. The sound can reoccur when the vehicle is lowered, and the wheels are once again under load. The noise might also be heard for a short time while driving.
- 10249015A vehicle arrives at your center to be diagnosed for a micro-leak in the fuel evaporative (EVAP) system(NVLD natural vacuum leak detection). For this condition, the following fault is stored in the DME: 190302 - fuel tank ventilation and scavenging air system, micro-leak: leakage more than 0.5mm For: Model vehicles other that the ones listed above, or for EVAP faults related to a large leak, after confirming that the fuel filler cap is fitted properly, then, proceed to follow the corresponding test plan
- 10247574A noise can be heard from underneath the seat while the seat is being moved either forwards or backwards. This can occur to the drivers and/or the passengers front seat.
- 10246225A check control message (CCM) for the restraint system (Air bag) appears. In the instrument cluster, the red air bag warning light lights up permanently. One of the following fault codes is stored in the ACSM (air bag control unit): 930949 - Knee airbag, driver: short circuit to negative terminal 93094F - Knee airbag, front passenger: short circuit to negative terminal 93094C - Knee airbag driver's side: Resistance too great 930952 - Knee airbag, front passenger: Resistance too great
- 10244239This situation can result in two customer complaints: 1. Wind noise 2. Excess water entry
- 10242879A groaning noise is present from the door frame of any door, most commonly when driving over rough roadsor during body flex. This situation may be worse in vehicles which are regularly waxed in the area of the door jamb. Note: This service information bulletin contains diagnostic and repair information which was previouslyincluded in an NED test plan that has been removed.
- 10242874Customers may be experiencing one or more of these following issues with Bluetooth operation: Bluetooth cannot be switched on or off in the head unit (HU-H4) Paired mobile devices cannot be deleted Customer is unable to make phone calls or stream music with mobile device Customer is unable to connect a new mobile device via Bluetooth Mobile device does not automatically reconnect via Bluetooth in the next drive cycle (after short sleep cycle)
- 10242872The customer states that one or more of the following situations may occur: 1. The availability of the Steering and Lane Control Assistant is deteriorating, and/or that the function allows thevehicle to move from side to side within the lane markings. 2. The parking space detection is less effective or hardly ever receives any parking space recommendations fromthe PMA.
- 10242699?When driving over uneven pavement or cobblestones, a knocking noise is present from the passenger side front area (A pillar). Once the vehicle is driven on a flat, even surface; the noise is no longer present.
- 10242696?Water leaking into the vehicle from the headliner/microphone area.
- 10242692While driving the vehicle on normal roads at 10mph and above, a "cracking" sound from the top of the B-pillar(s) is heard.
- 10242690?Disturbing noises (thump/pop) when reversing slowly near the steering wheel limit position; for example, when leaving a parking space.
- 10242686?An unapproved nut was used for the ground point for the chassis ground.
- 10242529A check control message (CCM) for the restraint system (Air bag) appears. In the instrument cluster, the red air bag warning light lights up permanently.
- 10239611Headlight check control (CC) message 128 "High beam headlight failure" is displayed. The following fault codes are stored during a vehicle test: 80419A - Left high-beam headlight: Short circuit and/or 8041A5 - light outputs: Number of permitted short circuit cycles exceeded
- 10239602A vehicle arrives at your center to be diagnosed for a micro-leak in the fuel evaporative (EVAP) system (NVLD natural vacuum leak detection). For this condition, the following fault is stored in the DME: 190302 - fuel tank ventilation and scavenging air system, micro-leak: leakage more than 0.5 mm.
- 10239601BMW AG has issued a Delivery Stop effective June 6, 2023 on certain Model Year 2023 - 2024 BMW vehicles that were produced between October 26, 2022 and May 8, 2023.
- 10239599With the introduction of the BMW Remote Software Upgrade, all Service Pack 18 vehicles and partial Service Pack 15 vehicles may receive new functionality or modifications in their features.
- 10238091BMW AG has issued a Delivery Stop (effective October 15, 2021) on certain Model Year 2022 BMW vehicles that were produced between September 28, 2021 and October 8, 2021. The issue involves the Active Crash Safety Module (ACSM) sensor.
- 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
- 10238088Check Engine Light is illuminated, check control message indicates ""bring in for service"". The faults themselves and the Malfunction Indicator Lamp (MIL) have no functional effect on the vehicle. There are multiple missing message fault codes (DTC) stored in the integrated automatic heating/air conditioning system (IHKA) control unit."
- 10238083Due to a software error, the vehicle sporadically does not achieve sleep mode. As a result, the 12-volt battery becomes discharged and may cause a no-start condition.
- 10238081Upon opening and closing the tailgate, a creaking/groaning sound can be heard from tailgate actuator.
- 10238080Due to the semiconductor supply, the Local Interconnect Network module in either of the exterior mirrors was switched to another controller. That one provides an imprecise voltage measurement, which the main controller interprets as a fault.
- 10238077Upon opening or closing (i.e., folding in or out) the exterior mirror assembly, a creaking sound is heard from either the driver and/or passenger side.
Every BMW X3 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.