2015 BMW X3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2015 BMW X3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
7 recalls name the 2015 BMW X3. Newest first.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical…
An electrical short increases the risk of a fire.
Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 328d, 328d xDrive, 2014-2018 328d Sports Wagon, 328d xDrive Sports Wagon, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV, and 2014-2017 X5 xDrive35d SAV diesel vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. The EGR cooler…
A melting intake manifold increases the risk of a fire.
Dealers will replace the EGR cooler and inspect the intake manifold, replacing it as necessary, free of charge. This recall includes all vehicles previously recalled under 18V-755. Vehicles previously recalled under 18V-755 will need to have the new remedy performed for this recall. An interim owner notification letter was mailed on January 18, 2022. The remedy is expected to be available in June 2022. Owner notification letters were mailed on July 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2014-2018 328d, 328d xDrive, X5 xDrive35d, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, and 2015-2017 X3 xDrive28d vehicles. The high-pressure fuel pump may fail.
Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Dealers will replace the high-pressure fuel pump, free of charge. Owner notification letters were mailed on January 14, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW 328d and 328d xDrive, 2014-2018 328d Sports Wagon and 328d xDrive Sports Wagon, 2014-2016 535d and 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV and 2014-2017 X5 xDrive35d SAV vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. If the EGR…
The melting intake manifold can increase the risk of a fire.
BMW will notify owners, and dealers will inspect and replace the EGR cooler as necessary. If a leak has already occurred, the engine intake manifold will also be replaced. These repairs will be made free of charge. The recall began May 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC. (BMW) is recalling certain model year 2015 BMW X3 sDrive28i, X3 xDrive28i, X3 xDrive35i, X3 xDrive28d, X4 xDrive28i and X4 xDrive35i vehicles, and model year 2014-2015 X5 xDrive35i, X5 sDrive35i, X5 xDrive50i, and 2014 X5 xDrive35d vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been…
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.
BMW will notify owners, and dealers will replace the driver's front air bag, free of charge. The recall began on November 1, 2016. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2011-2017, X3 sDrive28i, X3 xDrive28i and X3 xDrive35i, vehicles manufactured July 2, 2010 to April 14, 2016, 2015-2017 X3 xDrive28d vehicles manufactured March 10, 2014 to March 31, 2016, and 2015-2017 x4 xDrive28i, X4 xDrive35i and X4 xDriveM40i vehicles manufactured March3, 2014 to April 15…
Damaged lower anchor bars may increase the child's risk of injury in the event of a crash.
BMW will notify owners, and dealers will weld a reinforcing bracket to the lower anchor bars and the vehicle body, free of charge. The recall began on July 13, 2016. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2015 X3 and X4 Sports Activity Vehicles manufactured July 28, 2014 to July 29, 2014. The affected vehicles may have been produced with a driver's side exterior rearview mirror that was designed to meet non-US market requirements. Thus, these vehicles fail to comply with the Federal Motor…
The driver may not notice that vehicles viewed in the mirror are closer than they appear, increasing the risk of a crash.
BMW will notify owners, and dealers will replace the driver's side exterior rearview mirror, free of charge. The recall began on December 16, 2014. Owners may contact BMW customer service at 1-800-525-7417 or CustomerRelations@bmwusa.com.
While driving under medium acceleration, vehicle made a loud popping noise and engine power was severely reduced. Drivetrain warning light immediately appeared and said vehicle could be driven but at reduced power and needed to be serviced soon as possible. At highway speeds on a major interstate, this created several close calls being struck by traffic while trying to reach a safe area on shoulder. On site inspection revealed the plastic turbo charge pipe had blown away from the throttle body. Pieces of plastic and metal were found in engine bay and under vehicle. Vehicle was driven to nearby residence and towed to closest suitable garage for more detailed assessment and repair. Facility confirmed the Air Duct, BMW part number 13717604033 had failed. Repair made costing approximately $825 US dollars.
The contact owns a 2015 BMW X3. The contact stated that while driving at an undisclosed speed, the vehicle stalled. The check engine warning light was illuminated, and the "Service Engine Soon" message was displayed on the instrument panel. The vehicle was taken back to the residence. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 140,000.
BMW illegally stopped updating my car which relies totally on it’s OS system in its iDrive. You used to be able to download them to a usb stick. 1 year newer cars can remotely still download the updates. This is dangerous and needs to be addressed. It is also biased and runs my entire car. The download should still be available for free. There was a technical report but BMW doesn’t honor that.
I am writing to formally report a serious and dangerous safety defect affecting my 2015 BMW X3, which I believe warrants immediate investigation and a recall. Description of the Defect: On multiple occasions, while driving in rainy or wet road conditions, my BMW X3 has suddenly and forcefully reduced speed without any brake pedal input from the driver. The vehicle appears to apply braking on its own, causing abrupt deceleration. This behavior occurs: On wet roads only, while driving straight at steady speed without warning lights or alerts, without driver input and at speeds that pose a high risk of rear-end collision. The sudden and unexpected braking has created an imminent danger to myself, my passengers, and surrounding vehicles, particularly on highways where traffic flow is fast and close. Uncommanded braking under normal driving conditions is a critical safety failure. A driver has no reasonable opportunity to anticipate or correct this behavior, and it places the vehicle at significant risk of being struck from behind. Given the seriousness of this issue, I have requested that BMW: Formally investigate this defect across 2015 BMW X3 (F25) vehicles Determine whether a systemic fault exists involving DSC, ABS, wheel speed sensors, or collision mitigation systems in wet conditions. Issue a recall or safety service action to permanently correct this behavior in order to provide affected owners with a reliable and documented fix. Reason for which I wanted to bring this situation to the NHTSA.GOV attention.
Our vehicle alerted us to over heating and to pull over immediately. Our car then stopped running. We had it towed and was told there was an issue with the water pump sensor and corrosion issues. They alerted us that there was a recall for these issues on our vehicle. We researched and found this to be true. When I contacted BMW they stated our vin number was not part of the recall but our vehicle match the exact models listed in the recall. We took it to the dealership and they repaired it for $2500 and the reason for the repair was the exact reason for the recall. Spoke with BMW again regarding this and they said if our vin was not on the recall list there was nothing they could do. I would think when your vehicle make and model matches the recall and the issues are the same you would be part of the recall no matter the vin number. I would like for this to be reviewed and see if we can get a reimbursement from bmw for the charges we paid out of pocket for an issue that should have been covered by the recall. The recall form attached is one my friend received who has the exact same car we have. The other documents are the service invoice and verification of our payment. Thank you!
High pressure fuel pump Stalling almost caused an accident Yes the problem has been confirmed by BMW BMW has inspected the component Check engine light and drivetrain errors BMW replaced a high pressure fuel pump and fuel system in 2019, see attachment. I was not notifies of the 2021 BMW recall for the high pressure fuel pump. The high pressure fuel pump fail in 2025, see attachment at around 60,000 on the replaced high pressure fuel pump in 2019, less than the original fuel pump. BMW now says they are not going to repair this because of the age and mileage on the car. My position is the mileage on the car is irrelevant. It’s the mileage on the fuel system replaced in 2019. In addition, I was not notified of the recall in 2021and now the question is “ is the high pressure fuel pump replaced in 2019 the same fuel pump replacement part that came with the car when new? Obliviously the 2021 recall may have upgraded the fuel pump to satisfy the recall. If so, that should have been put into my car in 2021. BMW has been very deceiving on answering my questions.
My from passenger seatbelt will always beep even when no one is sitting in it and the back middle seat has the wrong seatbelt installed and isn’t correct for use, so I am not able to ever use it, I don’t even know how that’s even possible that it’s an incorrect one installed but it won’t click into place at al!!!!! It’s jot safe of I have three passengers in the back. It was on recall for certain models and mine was not included but it’s clearly a safety issue!!!
The contact owns a 2015 BMW X3. The vehicle was repaired under NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The contact stated that on a separate occasion, the vehicle was taken to an independent mechanic for maintenance, and the contact was informed that the water pump had failed. The contact showed the independent mechanic the receipt for when the vehicle was repaired under the recall for the water pump. The contact was informed that the water pump was not replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was 71,245.
Engine over heating alert issued and to pull over immediately. We had car towed to bmw dealership who stated it is water pump issue. This is a known issue for this make and model but recall not in effect for our vin. We are having the same issues as stated in recall for water pumps and temperature control issues. Just because our vin number is not associated with this recall they will not repair this issue unless we pay out of pocket. This is a known issue for our make and model of car and should be a covered expense by bmw. I have attached a link to the recall issues. Please review and respond accordingly. Thank you!
The contact owns a 2015 BMW X3. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced the failure. VIN tool confirms parts not available.
I received a recall notice from BMW in October 2024 for Recall 24V-608 involving a water pump electrical connector defect in my vehicle. According to the notice, this defect may cause liquid to drip onto the water pump’s electrical connector, potentially leading to a short circuit and, in rare cases, a fire. As of June 2025, nearly eight months later, there is still no remedy available. I have contacted BMW, and although they acknowledge the risk, they have not offered a loaner vehicle or any alternative despite the known fire hazard. I am concerned for my safety and do not feel comfortable continuing to drive a vehicle with a known, unresolved safety defect. I am submitting this complaint because I believe this delay is unreasonable and puts drivers at risk. The vehicle is currently operational, but the issue has not been fixed or properly addressed.
The contact owns a 2015 BMW X3. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. Additionally, the contact stated that the high-beam headlights failed to operate as needed; however, the vehicle was not diagnosed by the dealer. The vehicle was not repaired. The failure mileage was 18,000. VIN tool confirms parts not available.
The contact owns a 2015 BMW X3. The contact stated while driving 40-50 MPH, the check engine warning light illuminated and the message "Engine Overheated -Stop Vehicle Immediately" was displayed. The contact parked and turned off the vehicle. The vehicle was later restarted, but the message "Engine Overheated Stop - Vehicle Immediately" was displayed again. The contact stated that the vehicle stalled while driving. The vehicle was taken to an independent mechanic, who determined that the water pump had overheated and needed to be replaced. The vehicle was then towed to the dealer, who also determined that the water pump needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the VIN was not included in the recall. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 63,000.
Vehicle was driving when it stalled while driving. The vehicle would not start after that. After having a mechanic look at the vehicle it was found the high pressure fuel pump failed causing extensive damage to the fuel system and a repair quote of $15,000. Even though vehicles manufacturered in the same model year had a recall for this issue my vin number did not receive the recall. The recall number for the recall I'm referencing is 21V586000. BMW denies any recall for my vehicle and will not cover repairs.
Vehicle was idle in the driveway next to my home and had not been driven since the night before. That morning, I started to smell what I thought was an electronic overheat of some sort in the house. When I inspected outside, the entire front end of the vehicle was on fire and the fire department needed to respond. The fire spread rapidly along the side of my home causing significant damage to my property as well as my neighbor's property. Our safety was put at risk because this fire could have occurred overnight while my wife, children and I were sleeping since the vehicle was not being operated at the time the fire happened. Representatives from my insurance company removed the vehicle and had it inspected at their facility, where they determined the vehicle to be a total loss as the entire front half of the car burned. Further, I did not receive notice of the known recall on my vehicle (with no know remedy as yet) which could be the cause of the fire, until a week after the incident occurred in October.
A low oil pressure signal flashed after regular service and my engine died as a result. No warning just died after years of regular service
The contact owns a 2015 BMW X3. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated there was an abnormal burning odor coming from the engine compartment. There were no warning lights illuminated. The dealer was contacted. The manufacturer was made aware of the issue. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 120,000. VIN tool confirms parts not available.
The contact owns a 2015 BMW X3. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW X3. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW X3. The contact received notification of the NHTSA Campaign to Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW X3. The contact was notified of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW X3. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while driving at approximately 30 MPH, there was a burning odor coming through the vents on the dashboard. The contact stated that she had not observed any warning lights being illuminated. The contact stated that the odor was intermittent but had been occurring for almost 4 months. The contact had stopped driving the vehicle out of concern that the vehicle might catch on fire. The dealer and the manufacturer were contacted. The contact was advised by the dealer that a second letter would be sent when parts were available for the recall repair. The failure mileage was approximately 50,000. VIN tool confirms parts not available.
The vehicle was driven 30 miles and parked at 9am weather was in the 30s-40s F. There were no check engine light, warning lights or abnormal readings on the gauges during the commute. At approximately noon, the vehicles was started and idled for approximately 20 min, it was not driven or moved from the parking spot, the car did not reach full operating temp. Smoke with a burnt plastic and electrical odor was noted emanating from under the hood while parked idling. The car was immediately shut off and exited. The driver went inside to get help. After returning to the vehicle in approximately 5minutes it was fully engulfed in flames. The fire department came to put out the fire. The vehicle is a total loss. The fire damaged adjoining vehicles and the property where it was parked. The vehicle was towed back to my residence where it remains for evidence. Upon review of BMW recall 24v-608 i performed an inspection of the water pump electrical connection plug and identified there is evidence of an electrical short on the plug which appears to have burnt through the connector prior to the major engine compartment fire. I have contacted BMW to file a complain and have followed up multiple times with the point of contact identified to me by BMW, but have been unsuccessful to date to establish communications with the BMW representative.
I was driving on the interstate [XXX] when the car (2015 x3 BMW xDrive28d) went into neutral out of nowhere and the car completely stopped and never came back on. I was just about to get off of the next exit and did not make it I was stuck in the middle of the interstate scared no one would pull over to help me it was dark when all of this was taking place cars were speeding and would come up on the car at the last minute to go around almost causing a accident once they realized the car wouldn’t start. When trying to see if the car would turn back on it wouldn’t things came up on the screen saying power train along with the check engine light and some smoke was coming from underneath the hood it was also saying battery not charging. I had to wait 2hrs for a tow truck to get the car back to my house and the police never came. On [XXX] I then had the car towed to bmw dealership (Bmw of Bloomfield) in New Jersey where the vehicle is currently at they have told me it was a fuel pump issue. This has never happened to me before until the night of [XXX]. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2015 BMW X3. The contact stated while driving on the interstate at an undisclosed speed and attempting to make a right turn onto the exit, the transmission unexpectedly shifted into neutral, and the vehicle shut off unintendedly. The vehicle was towed to a dealer where it was diagnosed and determined the fuel pump control module (EKPS) needed to be replaced. The manufacturer was notified of the failure and informed the contact that there was no recall on the VIN for the failure. The failure mileage was 180,000.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. During the investigation, ODI sought to determine if the related defect allegation was limited in scope to the recalled population. After review of information request response materials from both FCA and BMW, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA and BMW.During the investigation FCA filed recalls 22V406, 22E048, 22V767, and 22E087 which include vehicles not identified in the initial subject population by ODI. ODI also received recall 21V586, involving loss of motive power due to failed CP4 fuel pumps on certain BMW manufactured vehicles. An information request letter response received from BMW indicated that failed pumps on their vehicles were caused by an interaction between pump internal components and US market diesel fuel, leading to increased slip and eventual particle-generating wear surface. Additional work will be done to identify whether a similar root cause is associated with the FCA recalled population and if similar wear dynamics occur on pumps supplied to vehicle manufacturers other than those included in the recalled population.ODI has upgraded this investigation to an EA in order to 1) determine engineering specifications of internal pump components that are correlated with pump failure leading to loss of motive power or other safety related hazards, 2) identify vehicle populations equipped with alleged defective pump variants, 3) assess if vehicles equipped with alleged defective pump variants result in an unreasonable risk to motor vehicle safety and 4) gather and review any other relevant information related to high pressure fuel pump failure associated with the subject populations of recalls 21V586, 21V880, 21E094, 22V406, 22E048, 22V767, and 22E087.Review of the above information will allow NHTSA to confirm root cause and recall remedy viability, and identify and evaluate vehicle populations equipped with pump components that may pose an unreasonable risk to motor vehicle safety.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11257550, 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11377871, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11446542, 11448163, 11453556, 11458918, 11460558, 11469337
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.