2001 Chevrolet Corvette
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Chevrolet › Corvette › 2001
These records cover every 2001 Chevrolet Corvette. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2001 Chevrolet Corvette. Newest first.
Dope, inc. IS recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on july 28, 2009. owners may contact dope, inc. At 1-626-272-1798.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
On certain passenger vehicles equipped with electronic column lock systems (ecl), when the ignition switch IS turned to "lock," the ecl system prevents turning of the steering system. when the vehicle IS started, the ecl unlocks the steering system. the vehicle IS designed so that if the column fails to unlock when the vehicle IS started and the…
Risk and remedy
Risk
If this occurs, a crash could occur without warning.
Remedy
On vehicles equipped with an automatic transmission, the dealer will disable the steering column lock by removing the column lock plate. when the ignition key IS removed, the transmission shifter will lock but the steering column will not lock. on vehicles equipped with a manual transmission, the dealer will reprogram the powertrain control module, perform a dimensional check of the column lock and, if necessary, replace the lock plate. the steering column on these vehicles will continue to lock when the key IS removed. owner notification to owners of 1997 vehicles equipped with automatic transmissions began on april 26, 2004. owners of 1998 through 2004 vehicles (except 1997-1998 manual transmission vehicles) will be notified beginning on august 2, 2004. the remaining owners (1997-1998 manual transmission vehicles) will be notified later in 2004, when parts are available. owners should contact chevrolet at 1-800-630-2438.
Owner complaints
205 complaints6 involved a crash3 involved a fire3 injuries
What owners report most
Latest complaints
- Structure › Body
One of the upper rear control arm brackets partially detached from the chassis while cornering causing the rear wheel to toe out. The cause of the failure is a cold weld. The vehicle is untouched since the incident and available for review. This issue is relatively common on C5 corvettes. Please…
One of the upper rear control arm brackets partially detached from the chassis while cornering causing the rear wheel to toe out. The cause of the failure is a cold weld. The vehicle is untouched since the incident and available for review. This issue is relatively common on C5 corvettes. Please search "C5 control arm bracket tear" to find many documented instances. As these vehicle shift from being garage queens to performance bargains, the issue will become more visible. My C5 went 100k miles and 20 some years until the cold weld let go.
- Steering
My Corvette was inspected as part of the initial steering lock recall and I was told it was okay, no action was needed. Subsequently, my steering column lock has frozen and the vehicle cannot be moved under its own power. Does the original recall still apply? From what I have seen on the Corvette Forum, this is an ongoing, recurring issue with C5 Corvettes.
- Steering
My steering column lock has failed on my C5 Corvette. I understand that there was a previous recall for this, but I have been the owner of this car since 2001 and was never notified by mail of the recall by GM. When I contact GM, they indicate that the recall is expired and there is nothing that they can do. HELP!!!
- Fuel/propulsion system · Steering
Chevy / GM recalled over 100,000 Corvettes built between 1997 and 2004 for a steering column lock issue, that renders the car un drivable. The fuel supply cuts off at 2 miles per hour. Many of the dealers did a faulty job fixing the problem, causing it to recur. My 2001 Corvette (with less than…
Chevy / GM recalled over 100,000 Corvettes built between 1997 and 2004 for a steering column lock issue, that renders the car un drivable. The fuel supply cuts off at 2 miles per hour. Many of the dealers did a faulty job fixing the problem, causing it to recur. My 2001 Corvette (with less than 17,000 miles) repeatedly experiences this problem. GM says they will not warrant this known defective design, due to the recall expiring. According to an internet search on “Corvette Steering Column Lock”, there no telling how many unhappy Corvette owners this has created. Need your help getting this $50,000 car back on the road.
- Fuel/propulsion system
We purchased the car on 12/17/21. I went to Costco on 12/18/21 to get gas. I had a preset amount of $50 to put into the car. When I got to $50 I shut the pump off myself, the tank was not full enough for it to shut off automatically. As I look down on the ground I saw a fluid running out from…
We purchased the car on 12/17/21. I went to Costco on 12/18/21 to get gas. I had a preset amount of $50 to put into the car. When I got to $50 I shut the pump off myself, the tank was not full enough for it to shut off automatically. As I look down on the ground I saw a fluid running out from underneath the car and rolling along the ground. I touched it with my finger and discovered it was gasoline. I put the nozzle back into the holder and I checked underneath the car and saw it was dripping from the drivers side in the area just behind the drivers door. I pulled the car over to the side to inspect it further. By now the gas had stopped dripping. Since the exhaust pipe is right next to the fuel tank I was afraid of a fire or explosion. Had some fuel vapors but they dissipated shortly after. My gas gauge was registering full at this time. Since then I have not had any gasoline leaks and or vapors present. I have not put any more gas in the car since then. (I contacted the previous owner and he said in an email response, if you overfill there is a vent hole that gas will leak out of at the top of the filler neck. It happened once when I put like 20 gallons in it.) I did some research and found that there is a problem with the Corvette gas tanks and or the crossover tube. I think this is a dangerous situation, thinking that if that gas ignited, the car and my passenger could have caught fire and possibly ignited the Costco gas station with an explosion. (This car will be going into the repair shop in January to have a diagnostic smoke test done to determine where the leak and or leaks are coming from.) I hope the NHTSA recognizes this as a very dangerous situation. All of this will be coming out of my own pocket for the repairs necessary to make this car safe to drive and not be dangerous to myself and family. I consider this a very serious dangerous situation.
- Steering
Have 2001 manual 6 speed corvette. Column locks up. Have no way to start car or steer. Worried car will lock up steering column while driving. Gm says there's no recall on this. Seems to be a problem on c5 Corvettes.
- Steering
TL* the contact owns a 2001 chevrolet corvette. The contact stated that when the vehicle was started, the steering wheel ceased with the service steering column warning light illuminated. The vehicle was taken to i.g. Burton lewes automall (17861 coastal hwy, lewes, de 19958) where it was diagnosed…
TL* the contact owns a 2001 chevrolet corvette. The contact stated that when the vehicle was started, the steering wheel ceased with the service steering column warning light illuminated. The vehicle was taken to i.g. Burton lewes automall (17861 coastal hwy, lewes, de 19958) where it was diagnosed and the mechanic determined that the steering column needed to be replaced. The vehicle was repaired three additional times however, the failure recurred. The contact mentioned nhtsa campaign number: 04v060000 (steering) as a possible solution to the failure however, the vin was not included. The manufacturer was notified of the failure and referred the contact to the dealer for the repair. The failure mileage was approximately 7,000.
- Steering
I pulled out into traffic and almost got killed! The console lock screen came on, and my car stopped as well! The wheel was not locked. The car that was so very understanding, suggest I get a ford. Gm truly needs to recall every car they have to be recalled for their loyal customers lives. I will…
I pulled out into traffic and almost got killed! The console lock screen came on, and my car stopped as well! The wheel was not locked. The car that was so very understanding, suggest I get a ford. Gm truly needs to recall every car they have to be recalled for their loyal customers lives. I will be contacting a lawyer as well! I had just come to a stop, and proceeded with the turn, with plenty of distance had this foolishness not have happened. Now I see this in just about everywhere on this computer! Fix this idiots at general motors!!!
- Electronic stability control (esc) · Fuel/propulsion system · Steering
I have owned this 2001 corvette since it was new it has less than 7000 miles on it.on friday may 8TH 2020 I had to have it towed to the dealer century chevrolet in broomfield colorado.the service column lock IS on at the dash and I cannot turn the steering wheel and if you try to drive it the…
I have owned this 2001 corvette since it was new it has less than 7000 miles on it.on friday may 8TH 2020 I had to have it towed to the dealer century chevrolet in broomfield colorado.the service column lock IS on at the dash and I cannot turn the steering wheel and if you try to drive it the vehicle will stall.i had recall 04006 performed on the car on 10/25/2004 with 1912 miles on it and this was a reprogramming of the pcm.i have since learned there has been 2-3 updates for this condition and there IS a recall 04006c and special policy #05081 for a new wiring harness to be installed to correct this condition.i was never contacted by gm about this and feel I should not have to pay for a defect they know about! The vehicle was towed out of my garage /driveway we had to push it out of the garage onto a tow truck and it IS currently at the dealership waiting to here what they are going to do. I don't think they are going to offer any help nor did they want to pickup the tow charges and add it to the bill. Regardless I have to fix the vehicle as it does me no good the way it is.with this said the original fix of the recall did not fix the vehicle and the now known fix should be done at no charge to the consumer/customer.this vehicle IS in mint condition and has not been modified in any way and taken care of like new since owned. I am reaching out to you because the right thing needs to happen and gm should accept responsibility for there actions and knowingly that there IS a defect. I am lucky I was not driving this vehicle as I was planning on driving the morning this happened as I could of killed myself or someone else.
- Wheels
2001 corvette, passenger side front wheel has an approx 3" crack where the spoke meets the rim and runs from where the tire mounts to inside the wheel affected wheel loses 20psi of air per hour.
- Electrical system · Steering · Vehicle speed control
Recall number 04v060000 recall date 02/09/2004 component steering:column locking:anti-theft device summary. steering locked at exiting freeway. the fuel supply shut off so the vehicle cannot moved. the vehicle cannot be steered.
- Fuel/propulsion system
When I fill up my gas tank there are strong gas fumes in the garage. The fumes are not there when the tank IS 3/4 full or less. This IS a continuing issue.
- Fuel/propulsion system
When you fill up the fuel tanks you get a very strong smell of gas in the car as well as in the garage. General motors knows about this complaint and will help their customers. In fact there IS a class action lawsuit against gm for year corvette 2004. It will cost about $ 2,000.00 to $ 2,500.00 to…
When you fill up the fuel tanks you get a very strong smell of gas in the car as well as in the garage. General motors knows about this complaint and will help their customers. In fact there IS a class action lawsuit against gm for year corvette 2004. It will cost about $ 2,000.00 to $ 2,500.00 to make the repairs. a lot of times the right tank IS cracked or the crossover tube IS cracked . I have called gm and asked for help and they will not accept this as a warranty issue. There are many complaints about this issue . By the way all the gm dealers are aware of the issue. can you help me out ? You smell the fuel when the car IS stopped.
- Steering
TL* the contact owns a 2001 chevrolet corvette. When the contact started the vehicle, the steering column seized and the check steering column warning indicator illuminated. The vehicle was not taken to a dealer to be diagnosed or repaired. the contact stated that the vehicle exhibited the same…
TL* the contact owns a 2001 chevrolet corvette. When the contact started the vehicle, the steering column seized and the check steering column warning indicator illuminated. The vehicle was not taken to a dealer to be diagnosed or repaired. the contact stated that the vehicle exhibited the same symptoms as tsb number: 04006c. The manufacturer was notified of the failure and advised the contact to call nhtsa. The manufacturer provided case number: 8-4532782724. The failure mileage was approximately 40,000.
- Steering
TL* the contact owns a 2001 chevrolet corvette. While restarting the engine, a "service steering column" message appeared and the steering wheel seized. The vehicle was towed to the local dealer (dave mcdermott chevrolet, 655 main st, east haven, ct) where it was diagnosed that the steering column…
TL* the contact owns a 2001 chevrolet corvette. While restarting the engine, a "service steering column" message appeared and the steering wheel seized. The vehicle was towed to the local dealer (dave mcdermott chevrolet, 655 main st, east haven, ct) where it was diagnosed that the steering column locking mechanism failed and needed to be replaced. The vehicle was repaired, but the failure continued. The vehicle was towed back to the dealer where it was diagnosed that the steering column actuator was faulty. The vehicle was repaired and the failure was remedied. The manufacturer was notified of the failure. The failure mileage was 42,996.
- Fuel/propulsion system
After filling fuel tank. Parked vehicle in garage and noticed a fuel leak on passenger side underneath fuel tank.
- Electrical system · Exterior lighting · Service brakes
When I bought the car I noticed the antenna stopped working but I hear the motor running after I turn the car on and off . Also my park lights come on and off and keeps going out with good fuses, also my horn won't blow and it has good fuses also my seat will only move forward and backward but not up to give me height this IS both in motion and parked
- Steering · Wheels
Service steering column locked
- Steering
The steering wheel lock does not release. I believe this was already a recall issue
- Engine · Steering
TL* the contact owns a 2001 chevrolet corvette. While the vehicle was in reverse, the steering wheel seized and the engine stalled. There were no warning indicators illuminated. The contact called a dealer (john l sullivan chevrolet 350 automall dr, roseville, ca 95661 (916) 782-1243), but the…
TL* the contact owns a 2001 chevrolet corvette. While the vehicle was in reverse, the steering wheel seized and the engine stalled. There were no warning indicators illuminated. The contact called a dealer (john l sullivan chevrolet 350 automall dr, roseville, ca 95661 (916) 782-1243), but the vehicle was not diagnosed or repaired. The manufacturer stated that no recall was associated with the vin and did not offer any assistance. The failure mileage was 134,000.
- Steering
My wife was driving down a busy road and stopped at a traffic signal. after moving about 10' the car stalled and the malfunction indicator flashed "pull key and wait 10 seconds" then "service steering column lock". this happened several times blocking traffic and causing a safety hazard. she was…
My wife was driving down a busy road and stopped at a traffic signal. after moving about 10' the car stalled and the malfunction indicator flashed "pull key and wait 10 seconds" then "service steering column lock". this happened several times blocking traffic and causing a safety hazard. she was able to get the vehicle home and it worked for a few days and the same thing happened to me while driving in traffic, the car stalled repeatedly from a dead stop upon moving about 10' and then after several restarts I was able to get the vehicle home and had it towed to a chevrolet dealer. The dealer confirmed that gm had performed recalls 04006b and no. 04006C on this vehicle several years ago to address the column lock issue and that recall included reprogramming the pcm to shut off the fuel at 2MPH - this vehicle will run indefinitely so long as it isn't put in gear and driven over 2MPH. the chevrolet dealer indicated that this safety issue isn't their concern and that gm expects it's customers to cover the cost - I phoned gm's recall department and told them the safety issue IS recurring and they confirmed that they expect their customers to cover the cost of this safety defect. I also told gm that I intended to file a complaint with the nhtsa and bbb if they didn't properly address this safety issue and they encouraged me to file those complaints. buyer beware
- Seat belts
Seat belt does not lock,can not buy a replacement.mfg does not make these anymore why?they should make replacement parts ,this IS a safety issue.you cannot drive car without seatbelt!
- Fuel/propulsion system
Gasoline smell when you fill the tank. it IS most prevalent at rear passage side of the car. when parked in garage the gas smell fills the garage.
- Fuel/propulsion system
Gas fumes after filling. Fills the garage over night. Happens all of the time.
- Fuel/propulsion system
In 2005 my steering column locked. the car was towed to chevrolet dealership in alexandria va. They unlocked the steering column but did not replace the necessary parts. now the computer reads that the steering column IS going to lock and the fuel pump shuts off. when the car was inspected by…
In 2005 my steering column locked. the car was towed to chevrolet dealership in alexandria va. They unlocked the steering column but did not replace the necessary parts. now the computer reads that the steering column IS going to lock and the fuel pump shuts off. when the car was inspected by wynngardner chevrolet they informed me then warranty had been satisfied. if the defected parts were replaced they would not have to replace then said parts were replaced initially. the vehicle has been inspected and said parts are not there. the dealership used the vin number in 2005, now when the vin number IS used, it shows that the recall was satisfied. this IS not the case.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Steering column lockup
In 2001, general motors (gm) issued customer service campaigns 1044 and 1044a to address a condition where the steering column would fail to unlock during the initial key-in and start-up in certain my 1998-2000 corvette vehicles.however, odi continued to receive complaints concerning steering column lockup on corvette…
In 2001, general motors (gm) issued customer service campaigns 1044 and 1044a to address a condition where the steering column would fail to unlock during the initial key-in and start-up in certain my 1998-2000 corvette vehicles.however, odi continued to receive complaints concerning steering column lockup on corvette vehicles.as a result, pe02-054 was opened and later upgraded to ea02-031 for my 1997-2001 subject vehicles.odi's analysis identified concerns with post-repair failures in vehicles serviced through the campaigns, as well as, failures in my 1997-2003 subject vehicles not included in the campaigns.(note: the manufacturer failure data above IS limited to my 1997-2003 vehicles through 10/17/2003.)on february 6, 2004, gm notified nhtsa of a safety defect in my 1997-2004 corvette vehcles equipped with manual transmissions and my 1997-2000 corvette vehicles with automatic transmissions.the notification stated that if the voltage at the powertrain control module (pcm), which was designed to shut down the fuel supply when the steering column failed to unlock and the customer tried to drive the vehicle, IS low or interrupted, the fuel shut off may not occur.as a result, the customer could drive the vehicle while the steering column was locked causing the driver to lose steering control and possibly crash without warning.gm will instruct owners to bring their vehicles to a dealer to have the pcm reprogrammed for manual transmission vehicles and the electric column lock disabled for automatic transmission vehicles.odi will monitor the effectiveness of the remedy in the manual transmission vehicles and take further action if warranted.
- Steering column lockup
See resume in repository.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11009156This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
- 11007744This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
- 11007743This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
- 11006421GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
- 11004761This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
- 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10249980This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
- 10249590This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
- 10249011This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
- 10248444Vehicle Recalls
- 10247780This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
- 10247681Information On Requests To Add OnStar Bluetooth Option.
- 10247552This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
- 10246952Programming And Activation Of Replacement OnStar Modules.
- 10246951Programming And Activation Of Replacement OnStar Modules.
- 10246884Composite Transverse Spring Damage.
- 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
- 10245989This Preliminary Information communicates diagnostic information to dealership techs to assist them in diagnosing either a "Service Column Lock" or a "Pull Key, Wait 10 Seconds"message on the DIC.
- 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
- 10245950Canadian Customers Unable To Place Calls In The United States
- 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10244201This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10242843The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
- 10242298This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
- 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 10240793This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
- 10236164This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
- 10235799This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10234110This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10232811This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
- 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
- 10232136This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
- 10230697This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
- 10228888This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
- 10227056This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
Every Chevrolet Corvette model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.