2018 Chrysler Pacifica Plug-In Hybrid
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Chrysler › Pacifica Plug-In Hybrid › 2018
These records cover every 2018 Chrysler Pacifica Plug-In Hybrid. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2018 Chrysler Pacifica Plug-In Hybrid. Newest first.
Chrysler (FCA US, LLC) is recalling certain 2017-2018 Pacifica Plug-In Hybrid Electric (PHEV) vehicles that received a software update remedy under NHTSA recall number 22V-077. The battery pack may cause a vehicle fire when parked, even with the ignition in the "Off" position.
Risk and remedy
Risk
A vehicle fire increases the risk of injury.
Remedy
Owners are advised not to charge their vehicles, and to park outside and away from structures, until they are repaired. Dealers will update the high voltage battery pack control module (BPCM) software. In addition, dealers will inspect and if necessary, replace the battery pack assembly. Repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed August 1, 2024. Owner notification letters were mailed December 12, 2024. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is 73B. Vehicles previously repaired under recall 22V-077 will need to have the new remedy completed.
Chrysler (FCA US, LLC) is recalling certain 2017-2018 Pacifica Plug-In Hybrid Electric Vehicles (PHEV). A vehicle fire can occur when parked, even with the ignition in the "Off" position.
Risk and remedy
Risk
A vehicle fire increases the risk of injury.
Remedy
Owners are advised not to recharge their vehicles, and to park outside and away from structures, until they are repaired. Dealers will update the high voltage battery pack control module (BPCM) software. In addition, dealers will inspect and if necessary, replace the battery pack assembly. Repairs will be performed free of charge. Interim letters, informing owners of the safety risk were mailed on February 25, 2022. Final owner notification letters were mailed October 6, 2022. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is Z11. This recall is superseded by NHTSA recall 24V-538.
Chrysler (FCA US LLC) is recalling certain 2017-2020 Pacifica Plug-in Hybrid Electric Vehicles ("PHEV"). The 12 volt isolator post located behind the driver's seat may develop high resistance.
Risk and remedy
Risk
A high resistance electrical connection may result in the connection overheating, increasing the risk of a fire with the vehicle on or off.
Remedy
FCA will conduct a voluntary safety recall on affected vehicles to increase the torque and install a waterproof gasket to the 12v isolator post, the post will also be inspected for signs of contamination. In the event the post is compromised, the 12v isolator post and associated cables will be replaced. Until the final remedy is available, customers should bring their vehicles to dealers for an interim inspection of this joint. The recall remedy is currently under development. FCA US LLC will notify owners, and dealers will perform an interim inspection of this joint. If the inspection indicates the joint is compromised, owners will receive a loaner vehicle, until a final remedy is developed. Interim notifications are expected to begin around June 22, 2020. The recall began July 30, 2020. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is W46. Note: Consumers are advised to exercise the following precautions until the vehicle has the final repair completed: do not park these vehicles inside of buildings or structures, or near other vehicles. Additionally, keep liquids out of the backseat area, including but not limited to beverages, wet items, umbrellas, or bottled liquids that may leak.
Chrysler (FCA US LLC) is recalling certain 2018 Chrysler Pacifica and Pacifica hybrid vehicles. The right front lower control arm may separate from the steering knuckle.
Risk and remedy
Risk
A control arm separation could increase the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the right front knuckle and lower control arm for damage, replacing the components as necessary. The right front lower control arm knuckle pinch bolt will be replaced with a larger-diameter pinch bolt. These repairs will be performed free of charge. The recall began April 26, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V15.
Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica Plug-in Hybrid Electric vehicles (PHEV). After the vehicle has been operating in PHEV propulsion mode, the gas-fueled engine may not restart properly resulting in unburned fuel entering the exhaust catalyst.
Risk and remedy
Risk
The improperly started engine could result in a loss of motive power increasing the risk of a crash or the unburned fuel in the catalyst may ignite increasing the risk of a fire.
Remedy
FCA will notify owners, and dealers will update the powertrain controller module software, and inspect and replace the catalytic converter as necessary, free of charge. The recall began November 15, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U94.
Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid…
Risk and remedy
Risk
A vehicle stall can increase the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
Owner complaints
224 complaints3 involved a crash12 involved a fire4 injuries
What owners report most
Latest complaints
- Power train
The contact owns a 2018 Chrysler Pacifica Plug-In Hybrid. The contact stated that while driving at 65 MPH, the vehicle experienced a total loss of motive power. The Check Engine warning light illuminated, and a warning message reading "Stop Safely Vehicle will shut off Soon" was displayed. The…
The contact owns a 2018 Chrysler Pacifica Plug-In Hybrid. The contact stated that while driving at 65 MPH, the vehicle experienced a total loss of motive power. The Check Engine warning light illuminated, and a warning message reading "Stop Safely Vehicle will shut off Soon" was displayed. The vehicle was towed to a dealer where diagnosis confirmed a transmission failure requiring replacement. The vehicle was scheduled for repair. The failure mileage was 181,901.
- Electrical system › 12v/24v/48v battery
The contact owns a 2018 Chrysler Pacifica. The contact stated when attempting to charge the battery, the charger failed to work as intended . A dealer was contacted. The vehicle was towed to the dealer where it was diagnosed that the battery needed to be replaced and and they sent a request to…
The contact owns a 2018 Chrysler Pacifica. The contact stated when attempting to charge the battery, the charger failed to work as intended . A dealer was contacted. The vehicle was towed to the dealer where it was diagnosed that the battery needed to be replaced and and they sent a request to the manfactuer in regards to replacing another battery. The vehicle was repaired as the battery was replaced three times. The manufacturer was notified of the failure and they could not give her an update and they informed her this is up to the dealer. The approximate mileage was 101,000.
- Electrical system · Unknown or other · Vehicle speed control
I was traveling at south bound on TOLL 130 going 80MPH (which is the speed limit on that road) when my Pacifica immediately slowed down and my accelerator gave out. In addition to my dash flashing that the cruise control was no longer available, but the van also said "Service Charging System" and…
I was traveling at south bound on TOLL 130 going 80MPH (which is the speed limit on that road) when my Pacifica immediately slowed down and my accelerator gave out. In addition to my dash flashing that the cruise control was no longer available, but the van also said "Service Charging System" and "Shift to P to Start", the engine light and batter light both came on. I am sure that I almost died as I was in the middle lane and cars were whipping around me since I had slowed down so much, there was an 18 wheeler behind me and one of my righthand side, which is the shoulder I was trying to get to. I was finally able to coast to the shoulder and came to a stop, put the car in park and turned it off. I immediately started researching what the problem could be and I was alarmed to find out that this is an issue that others have had and that Chrysler has failed to issue a recall...I was able to start the car once more and get on to a little back road, after pushing through a barricade off the toll just for safety's sake, and my van broke down again, this time on a little 2 lane road, which thankfully had a little bit of a gravel shoulder. This time, my van took quite a bit longer to get started, but I was not safe where I was. I started it once more and was able to get to a Wal-Mart parking lot where my brother-in-law picked me up so that I could have a chance of making it to see my grandmother who was on her deathbed, I missed my window of opportunity to make it to see her, she died that afternoon. I had to pay an additional tow fee to get the vehicle moved from the parking lot to a Chrysler dealership since it was so far from where I usually go.
- Electrical system
I have a 2018 Chrysler Pacifica Hybrid. I purchased it brand new in 2018. This van has had sooo many problems, it has been in and out of the shop, countless recalls. Last year it was in the shop for almost the entire year, I think I had possession of the van for less than 3 months of the year.…
I have a 2018 Chrysler Pacifica Hybrid. I purchased it brand new in 2018. This van has had sooo many problems, it has been in and out of the shop, countless recalls. Last year it was in the shop for almost the entire year, I think I had possession of the van for less than 3 months of the year. I just brought my van in for a recall related to the hybrid battery and it was returned to me in December, within 2 weeks there were check engine lights on and when I googled the code that was showing I found a ton of blogs about how people had the same recall done and within a short period of time this code came up and it meant the hybrid battery needs to be replaced. I reached out to the dealer and brought it in to get looked at. After a couple weeks I was told that the replacement of the battery would not be covered under the recall since part of the recall solution is testing the battery, and it tested good. I literally had only had the van back for 2 weeks. And I have countless records of engine codes showing up for years. I currently have 8 active engine codes showing. I know there is an open investigation concerning the recall I just had the remedy done for and I am 100% sure that this defect is related to that recall.
- Fuel/propulsion system
Had check engine code p1c5e and vehicle would not charge. Dealership has confirmed that the lithium battery has failed and needs to be replaced. They communicated with Chrysler, opened a STAR case, and are in process of replacing the battery
- Electrical system · Engine · Unknown or other
Vehicle states "Stop Safely Vehicle Will Shut Off Soon" with a red turtle logo. I have restarted the vehicle, and the warning persists. I am bringing in the car to the dealer next.
- Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (HYBRID PROPULSION SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (HYBRID PROPULSION SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Electrical system · Engine · Power train
On [XXX], my vehicle produced a large red wrench and a turtle warning on a busy highway and I was forced to pull to the side with my [XXX] son in the car, as the vehicle lost motive power. It was towed to the dealer and after several days, they told me the issue was due to normal wear and tear in…
On [XXX], my vehicle produced a large red wrench and a turtle warning on a busy highway and I was forced to pull to the side with my [XXX] son in the car, as the vehicle lost motive power. It was towed to the dealer and after several days, they told me the issue was due to normal wear and tear in the transmission. I had to escalate to a service manager to even get a diagnosis after 5 days in the shop. I believe my transmission issue is due to a failure of the fix implemented in the 03A/NHTSA 23V-010 recall. It has been documented that the software update did not fix the issue. My vehicle experienced the exact series of failures described in the recall. Chrysler is refusing to fix my vehicle, even though they had extended the warranty on my Pacifica to unlimited miles/unlimited years because of all of the transmission issues the model has experienced. I would appreciate it if someone could look into this and Chrysler's unwillingness to stand behind their products and provide fixes for their recalls that work. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Seats
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact stated while driving at an undisclosed speed, the middle passenger’s side captain seat became inoperable. The contact stated the back rest failed to remain locked in place. The contact stated that seat fell forward, raised up and…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact stated while driving at an undisclosed speed, the middle passenger’s side captain seat became inoperable. The contact stated the back rest failed to remain locked in place. The contact stated that seat fell forward, raised up and unlocked before sliding forward and collapsing. The vehicle was taken to the dealer but was not diagnosed or repaired. The contact was informed by the dealer that a fix was not available for the failure. The manufacturer was made aware of the failure and a case was opened. The approximate failure mileage was 81,000.
- Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system
I have a Chrysler Pacifica Hybrid which has had multiple recalls for the battery causing fires with no resolution. The NHTSA website said to submit a complaint "If the manufacturer has failed or is unable to remedy this safety recall for your vehicle in a timely manner". The most recent recall was…
I have a Chrysler Pacifica Hybrid which has had multiple recalls for the battery causing fires with no resolution. The NHTSA website said to submit a complaint "If the manufacturer has failed or is unable to remedy this safety recall for your vehicle in a timely manner". The most recent recall was in July without resolution but the battery has been recalled multiple times over the last few years without actual fix being done.
- Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (HYBRID PROPULSION SYSTEM); however, the part to do the recall repair was unavailable. The manufacturer was contacted, and it was confirmed that the part was not yet available.…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (HYBRID PROPULSION SYSTEM); however, the part to do the recall repair was unavailable. The manufacturer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The local dealer was not contacted. The contact had not experienced a failure. VIN tool confirms parts not available.
- Hybrid propulsion system · Power train
The contact owns a 2018 Chrysler Pacifica. The contact received a notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The contact stated that while driving at various speeds, the vehicle failed to accelerate…
The contact owns a 2018 Chrysler Pacifica. The contact received a notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The contact stated that while driving at various speeds, the vehicle failed to accelerate while depressing the accelerator pedal. No warning light illuminated. The vehicle was taken to an unknown dealer, where unknown repairs were completed at the contact's expense. No further information was provided. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was unknown. VIN tool confirms parts not available.
- Unknown or other
The unresolved recall with no remedy stems from an earlier recall is entering its fourth month with no further communications from the manufacturer about the status of the remedy. There has been no compensation provided to car owners with increased carrying costs due to the manufacturing failures…
The unresolved recall with no remedy stems from an earlier recall is entering its fourth month with no further communications from the manufacturer about the status of the remedy. There has been no compensation provided to car owners with increased carrying costs due to the manufacturing failures, decreased car valuation due to repeated failed attempts to remedy the same recall, nor indirect costs of extended stress and fear. I am unable to park my car by my house due to the fire risk, which has required me to buy monthly parking passes. I am unable to charge my car, which has caused increased gas costs. I previously paid to install a level 2 charger in my home, which I am unable to use. Additionally a concerning electrical noise has started to occur when starting the car or long after turning the car off. I am continually anxious about driving this car with my children, but I have no other choice to continually put all of us at risk. Jul 18,2024 Manufacturer Recall Number73B NHTSA Recall Number24V-536 Recall Status Recall Incomplete, remedy not yet available
- Electrical system
Chrysler has still not offered a remedy for this recall .the vehicle was purchased used and selling dealer did not provide recall info until the sale had been completed. I love the vehicle except the possible fire hazard in the recall makes me nervous to drive it . Chrysler told me earlier recalls were for this hazard but now says remedy is incomplete!!
- Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system · Forward collision avoidance › Warnings · Lane departure › Assist
My vehicle was performing great - no Issues what so ever until FCA performed Recall 03A. After I had FCA US LLC Recall 03A for Loss of Motive Power installed; my vehicle had several issues the same day I picked it up from the Dealer. They stated it was ready for pickup even with all my issues and…
My vehicle was performing great - no Issues what so ever until FCA performed Recall 03A. After I had FCA US LLC Recall 03A for Loss of Motive Power installed; my vehicle had several issues the same day I picked it up from the Dealer. They stated it was ready for pickup even with all my issues and they new I had ½ of them and still turned it over to me. . 50 % of the issues are still waiting to be repaired. The Major issue remaining is the High Voltage Battery. After 1 year of them trying to get the vehicle back to the condition I turned it in before for the Recall - Chrysler refuses to replace the HV battery under the 10 year 100,000 mile warranty. They will not let anyone order the part even the dealer can not. To order the bad part Chrysler STAR (FCAs part replacement approval authority) has to Approve it. They say they won't replace it due to normal degradation. I was getting 30 miles per full charge and after the Recall I was only getting18-20 Miles per full charge. That is Not normal degradation. Now I only get 17-18 miles per charge. They Degraded my battery with their Recall. The battery degraded by 33% in 2 weeks – that is Not normal their Recall caused it. I feel someone needs to enforce them to put my vehicle back the the same as I turned it over to them September 26, 2023 at their Expense no matter what it takes. The following is the list of issues in the past year because of Recall 03A. Basically my vehicle was in the shop for repairs Almost the Entire year! 1. Engine Lite is on all the time since Recall. 2. Charging System Errors. 3. Gear Selector does not work intermittently making undrivable. 4. Side doors and lift gate do not open or close automatically. 5. Radio Display keeps flashing intermittently 6. Back Up Camera flash on and off. 7. Every lite on the dash lights up - Giving my vehicle Multiple CANBUS Errors shorting out every computer system in the vehicle 20+ computers.
- Seats
The back of the second row bucket bucket will no longer latch in place, and free floats forwards and backwards, the bottom latch of the seat is also not longer catching and holding the seat in one place and moves all the way forwards in backwards. This is the second time this has happen, with a…
The back of the second row bucket bucket will no longer latch in place, and free floats forwards and backwards, the bottom latch of the seat is also not longer catching and holding the seat in one place and moves all the way forwards in backwards. This is the second time this has happen, with a car seat installed. This caused the car seat to be the at the incorrect angle for the age, height and weight of my child. The latch mechanism that holds the seat back in a fixed position, and the seat in a fixed location both failed. In the event of a crash the seat back would swing forward causing the passenger in that seat to be hunched forward, along with the passenger to be pushed into the front passenger seat. The dealership repaired this same issue several years ago and it has since happened again. We took the car to the dealership today but they were not able to take in for a repair. There were no warning for this defect, just looking back and seeing that the car seat was no longer at the correct angle, and when removing my child from the car feeling the seat back, and seat base free moving in my hand.
- Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Seats
Middle passenger side captain seat becomes unlocked. The back rest does not stay locked and when falling forward the seat lifts up and unlocks and slides forward. You just bounce around in the seat.
- Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system · Engine · Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. The contact stated that the failure occurred immediately after the vehicle was repaired under NHTSA Campaign Number: 23V010000 (Electrical System…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. The contact stated that the failure occurred immediately after the vehicle was repaired under NHTSA Campaign Number: 23V010000 (Electrical System, Hybrid Propulsion System). The vehicle was taken back to the dealer. The dealer requested that the vehicle be diagnosed and provided the cost for the diagnostic test. The contact declined to pay for a diagnostic test. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure and a case was filed. The failure mileage was 100,800.
- Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Forward collision avoidance · Hybrid propulsion system
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact took the vehicle to a dealer for NHTSA Campaign Number: 22V077000 (Hybrid Propulsion System) however, the contact stated the advanced collision warning light had illuminated after the recall repair. The local dealer was contacted…
The contact owns a 2018 Chrysler Pacifica Hybrid. The contact took the vehicle to a dealer for NHTSA Campaign Number: 22V077000 (Hybrid Propulsion System) however, the contact stated the advanced collision warning light had illuminated after the recall repair. The local dealer was contacted; however, denied further assistance because the recall repair was completed. The contact was referred to the manufacturer. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 5,000. The VIN was not available.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Electrical arcing and thermal events, potentially leading to fires, while utilizing Enel X Way USA, LLC's JuiceBox residential charger.
On October 3, 2024, the Office of Defects Investigations (ODI) opened PE24028 to investigate alleged failures of Enel X Way's JuiceBox Level 2 residential EV chargers. The allegations were described as thermal incidents and electrical malfunctions, which could trip the circuit breakers in Juicebox owners’ homes and…
On October 3, 2024, the Office of Defects Investigations (ODI) opened PE24028 to investigate alleged failures of Enel X Way's JuiceBox Level 2 residential EV chargers. The allegations were described as thermal incidents and electrical malfunctions, which could trip the circuit breakers in Juicebox owners’ homes and disrupt electric vehicle charge cycles. On October 2, 2024, Enel X Way posted on its website that Enel X Way North America would cease operations in the United States and Canada on October 11, 2024. The closure would potentially impact the charging app and supporting software. ODI sent Enel X Way an Information Request (IR) letter on October 21, 2024. Enel X Way provided an incomplete response to the IR on December 9, 2024. Enel X Way later provided a complete response to the IR on January 24, 2025. ODI reviewed Enel X Way’s IR submissions to determine whether further action is required. Based on ODI’s analysis, there was no clear trend in the cause of the failures described in customer complaints and warranty reports. Additionally, there have been no recent reports alleging safety issues. The available information does not warrant further action at this time. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency will continue to monitor for any safety trends and reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in this Closing Resume, go to NHTSA.gov.
- Loss of motive power due to an internal wiring connector short.
On July 22, 2022, the Office of Defects Investigation (ODI) opened investigation PE22-008 regarding complaints alleging a loss of motive power condition potentially due to a transmission malfunction in Model Years 2019-2021 Chrysler Pacifica Plug-In Hybrid Electric Vehicles (PHEV). On January 17, 2023, Fiat Chrysler…
On July 22, 2022, the Office of Defects Investigation (ODI) opened investigation PE22-008 regarding complaints alleging a loss of motive power condition potentially due to a transmission malfunction in Model Years 2019-2021 Chrysler Pacifica Plug-In Hybrid Electric Vehicles (PHEV). On January 17, 2023, Fiat Chrysler Automobiles (FCA) issued safety recall (NHTSA Recall 23V-010) involving 2017-2023 Model Years (MY) Pacifica Plug-In Hybrid Electric Vehicles (PHEV) produced between August 12, 2016, through January 9, 2023. The recall states that the loss of motive power condition in these vehicles is caused by an internal transmission wiring connector that may short circuit, resulting in an unexpected engine shutdown. An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash. In discussions with FCA on Recall 23V-010, ODI confirmed the recall was related to investigation PE22-008. The remedy for 23V-010 is to update the Power Inverter module (PIM) and/or Instrument Panel Cluster (IPC) software to provide drivers a message stating “Stop Safely - Vehicle Will Shut Off Soon” followed by a chime and MIL, PRNDL blinking (on cluster and shifter knob), low SOC (State of Charge) warning and reduced power mode. The recall remedy does not replace the defective hardware that was described in Recall 23V-010, and the wiring connector short still exists on these vehicles. To date, ODI has received 132 reports for the population of vehicles subject to recall 23V-010. These reports allege a loss of motive power condition that reduces the vehicles speed, followed by dashboard warning lamps displaying messages associated with recall 23V-010. The presence of these warning lamps and messages indicates the vehicle likely had the recall remedy applied. Follow up discussions with FCA confirm their remedy does not prevent a loss of motive power, but instead limits torque to the engine and after an unspecified number of miles or period of time, the engine will shut down. When this occurs, FCA relies on the owner to transport the vehicle to a dealership after they experience a loss of motive power condition, at which time the defective hardware is replaced. Furthermore, the dashboard messages introduced in the recall remedy may cause the driver to pull over in an unsafe location. Pulling over in an unsafe location may expose the occupants to undue harm. The Office of Defects Investigation is opening this Recall Query (RQ) to assess the adequacy, frequency, and safety consequence of the remedy for recall 23V-010. To review the ODI reports cited in the opening resume ODI report identification number document, go to NHTSA.gov.
- Ignition-off high voltage battery fire (Remedy effectiveness of Recall 22V-077)
On February 11, 2022, Fiat Chrysler Automobiles (FCA) issued a safety recall (NHTSA Recall 22V-077) on all 2017-2018 Pacifica Plug-In Hybrid Electric Vehicles (PHEV) produced between August 12, 2016 through August 7, 2018. The recall addresses ignition “OFF’ fires that originate at the high voltage (HV) battery pack…
On February 11, 2022, Fiat Chrysler Automobiles (FCA) issued a safety recall (NHTSA Recall 22V-077) on all 2017-2018 Pacifica Plug-In Hybrid Electric Vehicles (PHEV) produced between August 12, 2016 through August 7, 2018. The recall addresses ignition “OFF’ fires that originate at the high voltage (HV) battery pack assembly. An ignition ‘OFF’ vehicle fire can result in an increased risk of occupant injury, injury to persons outside the vehicle, and property damage, with little to no warning. At the time of the recall filing the root cause of the vehicle fires was unknown and under investigation by FCA and suppliers. A software remedy designed to improve thermal event detectability by monitoring battery diagnostics is currently being installed on subject vehicles as an interim remedy. As of November 23, 2023, the root cause of the battery failure is unknown. From December 2022 through December 2023, NHTSA has received four consumer complaints (VOQs) alleging vehicle thermal events involving recalled 2017 and 2018 Chrysler Pacifica PHEVs. Additional information collected from complainants confirmed a thermal event originating near or at the HV battery pack after the Recall 22V077 remedy had been applied to the vehicle. Follow up meetings with FCA and suppliers in November and December 2023 to discuss the ongoing root cause investigation and post-recall remedy incidents indicated a recent increase in HV battery thermal events. Furthermore, a review of NHTSA complaint data indicated the post-recall HV battery thermal event complaint rate now exceeds pre-recall levels. The Office of Defects Investigation (ODI) is opening this Recall Query (RQ) to review the effectiveness of the original recall remedy, understand the root cause of the battery fires, investigate additional reports of Pacifica PHEV HV battery fires, and to increase monitoring of the manufacturer root cause investigation. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
- Transmission fault leading to loss of motive power
On July 22, 2022, the Office of Defects Investigation (ODI) opened PE22008 to investigate allegation of loss of motive power, potentially due to transmission malfunction, in certain Chrysler Pacifica vehicles. In a January 17, 2023 letter to NHTSA, Fiat Chrysler Automobiles (FCA) submitted recall notice 23V-010…
On July 22, 2022, the Office of Defects Investigation (ODI) opened PE22008 to investigate allegation of loss of motive power, potentially due to transmission malfunction, in certain Chrysler Pacifica vehicles. In a January 17, 2023 letter to NHTSA, Fiat Chrysler Automobiles (FCA) submitted recall notice 23V-010 involving a transmission motor wiring defect in 67,118 model year (MY) 2017-2023 Chrysler Pacifica plug-in hybrid electric vehicles (PHEVs) manufactured from August 12, 2016 through January 9, 2023. FCA determined that an internal transmission connector short could result in an unexpected engine shutdown under certain conditions. Follow up correspondence with FCA confirmed this defect results in an electric motor position trouble code that was the basis for opening PE22008, therefore NHTSA is closing this investigation. The 23V-010 recall remedy is a software update to address the hardware failure associated with PE22008. When a hardware failure is detected, the vehicle limits motive power while instructing the driver to pull over to a safe location. NHTSA is concerned that drivers will pull over to an unsafe location when the warning message associated with the recall remedy displays on the dashboard. Due to the nature of the recall remedy and related reports, NHTSA has opened Recall Query RQ24004 to assess the recall remedy. The reports and failure report summary values included with this closing action are related to allegations of Recall 23V-010 remedy inadequacy. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010748Reverse View Camera Inoperative After Recent Repair
- 11009559Module - inverter
- 11007087Warranty Newsletter Volume 10 Issue 8_ID
- 11006965"Updated Front Hub Nut Torque Specification There are no Customer Symptoms for this Information Only Technical Service Bulletin (TSB). "
- 11005525Liftgate Inoperative And Or Intermittently Will Not Open Or Close.
- 11005320"Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
- 110048382 nd Row Seat Does Not Fold Using Easy Entry Handle.
- 11002828"Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On "
- 11001830"Internal Transmission Wiring Connector Short and Motor A Bearing Failure Warranty Extension XE1 **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** P0A3F - Drive Motor A Position Sensor 1 Circuit. P0A43 - Drive Motor A Position Sensor Circuit Intermittent. P0A45 - Drive Motor B Position Sensor 1 Circuit. P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: Vehicle is in limp mode. NOTE: Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: Hybrid Control Processor (HCP). Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). This bulletin involves replacing the transmission."
- 11001645Warranty Bulletin D-23-07 Rev. A (XE1) eFlite Si-eVT Transmission Certain 2017 - 2023 Chrysler Pacifica (RU)
- 11001644FCA Caribbean Warranty Bulletin ID-23-07 Rev. A (XE1) eFlite Si-eVT Transmission Certain 2017 - 2023 Chrysler Pacifica (RU)
- 11001466Power Sliding Door Inoperative Or Intermittently Will Not Open Or Close
- 11001459Suspected Engine Coolant Leak
- 10251783Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10247948Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
- 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10239957Water Quality When Mixed With Engine Coolant
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10234506Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: Major monitor (misfire) and other diagnostics are disabled on a pending DTCs P0335 and P0339. ? **P0335 - Crankshaft Position Sensor Circuit (NA Only). ? P0339 - Crankshaft Position Sensor Intermittent (NA Only).** ? P06E4 - Control Module Wake-Up Circuit Performance. Software enhancement: Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear. As a result, the vehicles are not eligible to be registered in certain states. ? Corrections to allow the vehicle to clear the permanent fault codes. This bulletin involves reprogramming the PCM with the latest available software. NOTE: Four modules are required to be flashed for this update to be effective, the following modules are all to be updated along with this PCM update: ? Electronic Brake Booster Module (EBBM). ? AntiLock Brake System Module (ABS). ? Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) or also known as a Power Inverter Module (PIM).
- 10234420Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10230183No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229285Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
- 10229102CHRYSLER PACIFICA (RU) MY2017-21 ELECTRIC COOLANT HEATER Part Requirement Verification
- 10228989Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10227709No Start After a Flash or Powertrain Control Module (PCM), Body Control Module (BCM) Replacement
- 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10224681Rain light sensor Rain sense wipers do not operate: 1. Visual Inspection--> Check if the sensor is visually OK. (all the pins are OK) Check that the Connector is NOT loose (Sensor must get a voltage from 9V to 16V) 2. Functional Checks Rain--> Steering column switch is in auto mode (sensor is active) it is necessary to splash water on the sensitive surface of the sensor to trigger wipes. check the same for different sensitivities When the rain sensitivity is increased (for example from level 0 to level 1), as an acknowledgement a single wipe is seen. (This is not a phantom wipe) and this single wipe is not seen when the rain sensitivity is decreased (from higher level to lower level) Light--> Steering column switch is in auto mode (sensor is active) block the light coming on the sensor from outside of the vehicle (use a opaque object), the head lamps should be activated 3. If the sensor seems functional, it is ideal to remove the silicon gel pad from the sensor, replace it with the new silicon gel pad instead of replacing the whole sensor. When servicing the LRSM please replace the silicon gel pad with a new silicon gel pad (PN 68224945AA) instead of replacing the whole sensor.
- 10224023(Rev. A) Battery Tester Warranty Code Procedures, Medtronic Update Process
- 10223855Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
- 10223028Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- 10221787USB PORT, Media Hub For Android Auto and Apple Carplay issues, do not replace this part. Android Auto and Apple Carplay applications may not operate with the vehicle if an aftermarket cable is being used. Verify the functionality of these applications using an OEM Apple Lightning cable or an OEM provided USB cable for Android phones before performing any additional troubleshooting. For questions regarding Android Auto or Apply Carplay functionality, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
Every Chrysler Pacifica Plug-In Hybrid model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.