2010 Dodge Dakota
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Dakota › 2010
These records cover every 2010 Dodge Dakota. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2010 Dodge Dakota. Newest first.
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
Chrysler (FCA US LLC) is recalling certain 2009-2013 Jeep Wrangler, Chrysler 300, Dodge Challenger and Dodge Charger vehicles, and 2009-2011 Dodge Dakota vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U03.
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge…
Risk and remedy
Risk
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Chrysler (FCA US LLC) is recalling certain model year 2005-2009 Dodge Ram 2500, 2004-2008 Dodge Ram 1500 and Durango, 2006-2009 Dodge Ram 3500, 2008-2010 Dodge Ram 4500 and 5500, 2007-2008 Chrysler Aspen, 2005-2010 Chrysler 300, 300C, 300S, and SRT8, 2006-2010 Dodge Charger, 2005-2008 Magnum, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles.…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the affected Chrysler and Dodge owners and Mitsubishi will notify the affected Raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for Chrylser on June 8, 2015. The recall for Mitsubishi started on June 24, 2015. Chrysler and Dodge owners may contact Chrysler customer service at 1-800-853-1403. Mitsubishi owners may call 1-888-648-7820. Chrysler's number for this recall is R25. Note: This recall supersedes recall 14V817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.
Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009…
Risk and remedy
Risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy
On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.
Chrysler is recalling certain model year 2009-2010, Ram 1500 and Dodge Dakota trucks, manufactured from July 1, 2009, through November 30, 2009, because the rear axle pinion nut may loosen due to a lack of adhesive.
Risk and remedy
Risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy
Chrysler will notify owners, and dealers will install a pinion nut retainer, free of charge. The recall began on June 17, 2013. Owners may contact Chrysler at 1-800-247-9753.
NBC Truck Equipment, Inc. (NBC) is recalling certain model year 2007-2008 and model year 2010-2011 trucks equipped with Sure Power battery separator devices, due to overheating.
Risk and remedy
Risk
Overheating of the battery separator can result in smoke and possible fire.
Remedy
NBC will notify owners, and Sure Power will replace the battery separators free of charge. The safety recall began November 26, 2012. Owners may contact NBC Truck Equipment, Inc. at 1-586-774-4900.
Owner complaints
35 complaints3 involved a crash1 injuries
What owners report most
Latest complaints
- Electrical system · Power train
Vehicle Has Experienced all Dash waring lights & noises going on and off while driving Threw multiple codes saying the PCM was not connecting with the ODB2 reader , Vehicle would not crank or start 2 times did a Hard reset and it started, the end result is all Dash Lights luminated when Key is on…
Vehicle Has Experienced all Dash waring lights & noises going on and off while driving Threw multiple codes saying the PCM was not connecting with the ODB2 reader , Vehicle would not crank or start 2 times did a Hard reset and it started, the end result is all Dash Lights luminated when Key is on , No crank & No communication with the PCM, No Code visible any more I replaced the PCM same issue Now the TIPM which I believe Blew my PCM also at 141,000 miles! Very Dangerous!! A well maintained vehicle should never have Computer Problems at 140,000 , FYI I am a state Licensed auto Mechanic. this Vehicle also had a fuel pump problem 12/21/2011 and was serviced at the dealership , I believe this truck was a "lemon" from that point on. Also, No vehicles should have mother Board computer's managing every system of the vehicle! Dangerous! The Manufactures are Scamming the Consumer. BCM, TCM, PCM ,ECS ,TIPM Are all Scam Engineering By the auto industry, EFI vehicle's only need 1 Computer for the ignition A ECU that's it , the rest of those systems are a Violation of wright to Repair and NHTSA Safety standards. [XXX] the lower Bolt mounting the PCM was so Corroded it broke off in the original PCM on removal. This Vehicle is a lemon . INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags
The contact owns a 2010 Dodge Dakota. The contact received notifications of NHTSA Campaign Numbers: 18V021000 (Air Bags) and 15V313000 (Air Bags). The dealer was contacted for the recall repairs and was informed that parts were not yet available. The contact called the manufacturer and was informed…
The contact owns a 2010 Dodge Dakota. The contact received notifications of NHTSA Campaign Numbers: 18V021000 (Air Bags) and 15V313000 (Air Bags). The dealer was contacted for the recall repairs and was informed that parts were not yet available. The contact called the manufacturer and was informed that it would take a while for the parts to be obtained. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the air bag warning light was blinking intermittently. The failure mileage was approximately 49,800.
- Service brakes · Vehicle speed control
The roads were slick and I was traveling slow came over the crest of a small hill over bypass and headed down hill braking slowly I could tell it felt like I wasn't slowing down like I expected as I approached a vehicle ahead of me stopped at the traffic light,so I pumped the brakes twice and the…
The roads were slick and I was traveling slow came over the crest of a small hill over bypass and headed down hill braking slowly I could tell it felt like I wasn't slowing down like I expected as I approached a vehicle ahead of me stopped at the traffic light,so I pumped the brakes twice and the engine roared and my truck raced forward and crashed into the vehicle ahead of me. The other driver was very angry and wouldn't believe me when I tried to explain what happened. He would not exchange information with me. My foot did not slip. I can't even get my truck to surge forward like that if I hit the gas hard
- Power train
Rear pinon seal has deteriorated alongside similar dodge trucks within the same year of model, but the 2010 dodge dakota IS not covered as well. *tr
- Electrical system · Suspension
Dodge dokata 2010. Heater resistor overheats repeatedly. Electrical smoke and burning smell repeatedly. very hot to touch. So overheated wires and resistor melts. Resistor and wires replaced numerous times. Same results. front ball joints keep going bad causing dangerous driving conditions.…
Dodge dokata 2010. Heater resistor overheats repeatedly. Electrical smoke and burning smell repeatedly. very hot to touch. So overheated wires and resistor melts. Resistor and wires replaced numerous times. Same results. front ball joints keep going bad causing dangerous driving conditions. many resistor and ball joint complanta all over the internet. I fear someone will die if the 2 issues are not resolved.
- Air bags · Electrical system · Engine
TL* the contact owns a 2010 dodge dakota. While driving various speeds, the check engine and air bag warning indicators remained illuminated. The vehicle was taken to an independent mechanic where it was diagnosed that the temperature sensor, catalytic converter, and ecm code (engine) needed to be…
TL* the contact owns a 2010 dodge dakota. While driving various speeds, the check engine and air bag warning indicators remained illuminated. The vehicle was taken to an independent mechanic where it was diagnosed that the temperature sensor, catalytic converter, and ecm code (engine) needed to be replaced. The vehicle was repaired; however, the failures recurred. The vehicle was not taken to a dealer. The manufacturer was not notified of the failures. The approximate failure mileage was 140,000.
- Air bags · Unknown or other · Vehicle speed control
I took my truck to eastgate chrysler at 500 north shadeland ave. 46219 ph.# 317-352-7192 to have my airbag recall repaired and a wheel alignment, there wasn't anything wrong with my truck when I took it into them, on my way home I notice that the airbag light was flickering when I turned corner…
I took my truck to eastgate chrysler at 500 north shadeland ave. 46219 ph.# 317-352-7192 to have my airbag recall repaired and a wheel alignment, there wasn't anything wrong with my truck when I took it into them, on my way home I notice that the airbag light was flickering when I turned corner sometimes and 2 days later it stayed on and the cruise control quite working and the horn wouldn't blow and and that area where you blow the horn was very hard, I made and appointment to take it in to see what the problem was and they told me I must have done something to damage it because it was fine when I left and the clock-spring was bad and the repair would cost $480,I told them,i'm not paying for there mistake, service manger refused to fix it so I called dodge customer service about 5-time and they couldn't get them to fixit either.
- Air bags · Seat belts
TL* the contact owns a 2010 dodge dakota. While driving 65 mph, the contact lost control of the vehicle. The vehicle veered to the left and flipped over. The air bags did not deploy. In addition, it was suspected that the harness strap of the driver's seat belt did not restrain the contact during…
TL* the contact owns a 2010 dodge dakota. While driving 65 mph, the contact lost control of the vehicle. The vehicle veered to the left and flipped over. The air bags did not deploy. In addition, it was suspected that the harness strap of the driver's seat belt did not restrain the contact during the crash. A police report was filed. The contact sustained injuries to the head, a punctured right lung, a fractured right hand, a fractured right femur, right and left knee dislocation, a fractured left ankle, perennial nerve damage, and major abdominal injuries. Medical attention was required. The vehicle was towed, but was not destroyed. A dealer and manufacturer were not made aware of the crash. The failure mileage was approximately 60,000. *Bf *tr
- Visibility/wiper
Takatarecall when attempting to engage the wiper washers, the blades move, but no washer fluid sprays on the window. sometimes the wipers work and sometimes they do not work and only resume working after I use the turn signal or push the washer stick. this happens while vehicle IS stationary or…
Takatarecall when attempting to engage the wiper washers, the blades move, but no washer fluid sprays on the window. sometimes the wipers work and sometimes they do not work and only resume working after I use the turn signal or push the washer stick. this happens while vehicle IS stationary or moving. the washer pump was replaced with a new one and still did not force fluid onto the windshield. I was told it IS an electrical problem in the steering column. when passing a semi truck in winter conditions or rainy driving, I have had to pull over and clean the windshield with a rag in order to see clearly to drive. very dangerous.
- Air bags
I took my 2010 dodge dakota to my local dealership (south hills dodge) on june 5TH 2017 after receiving multiple recall notices about the R25 passenger airbag inflator. they told me they would have to order the part and I will have to wait until it arrives. I went there again a month later and it…
I took my 2010 dodge dakota to my local dealership (south hills dodge) on june 5TH 2017 after receiving multiple recall notices about the R25 passenger airbag inflator. they told me they would have to order the part and I will have to wait until it arrives. I went there again a month later and it still never arrived. on oct 25TH 2017 I went there a third time and they told me that it's on order and I have to wait until the part arrives at their dealership. I have now waited over 20 weeks now for this part to arrive. it's a recall and a safety hazard but no one can obtain the part to fix the problem.
- Air bags
I receive air bag recall notice in 2016. I have been waiting for koons chrysler and dodge dealer in mclean. Va to fix recall for over 6 months. I took the pick up truck with an appointment several months ago but they did not fix it because they needed to order a part. I have to drive my pick up truck back and forth from virginia to south carolina with this defect.
- Air bags
TL* takata recall. The contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 16v352000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags
TL* the contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 16v352000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags
TL* takata recall. The contact owns a 2010 dodge dakota crew cab 4X2. The contact received notification of nhtsa campaign number: 16v352000 (air bags). The part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The vin was invalid. The contact had not experienced a failure.
- Air bags
TL* the contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 16v352000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags
Received safety recall notice in the mail2015 on 12/29/2015 abt 905 am I called cutter chrysler jeep dodge of pearl city about the recall they called me back @ about 0931 am saying they need to order the parts and will call me when they come in and make the appointment to schedule for service never received the call
- Steering
With only 41750 miles on my 2010 dakota, I was backing up a light trailer when suddenly the rear tires started spinning and it seemed like something was blocking the truck/trailer from moving. I walked around the vehicle and saw no blockages, but did notice the right front tire was pointed left and…
With only 41750 miles on my 2010 dakota, I was backing up a light trailer when suddenly the rear tires started spinning and it seemed like something was blocking the truck/trailer from moving. I walked around the vehicle and saw no blockages, but did notice the right front tire was pointed left and the left front was pointed right. Upon inspection, I found the left front tie rod end 100% separated at the ball/socket joint. There was no grease, lots of rust, and it was dry as a bone in the ball/socket joint. There was no grease fitting on the tie rod end. This happened in my yard at near-zero speed. However that last thing I did with this truck was to tow a camper trailer up north and back with my family in the truck. I was going to do this again in two weeks. This would have been a terribly unsafe thing to have break at freeway speeds and it seems obvious it would have happened on the next trip had it not broken at my house. Very scary, for a truck with only 41,750 miles on it. It cost me $130 in parts ( I replaced both) plus a front end alignment to repair this.
- Air bags
TL* the contact owns a 2010 dodge dakota. The contact stated that the recall notice for nhtsa campaign number: 15v313000 (air bags) was received in may of 2015. After contacting the dealer and the manufacturer, the contact was informed that the parts needed to repair the vehicle were still not available and no estimated time for receiving the parts could be given. The contact had not experienced a failure.
- Air bags
TL* takata recall. The contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 15v313000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The…
TL* takata recall. The contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 15v313000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. The manufacturer was not made aware of the issue. Parts distribution disconnect. updated 05/03/16*lj updated 05/04/16. *Jb
- Air bags
TL* takata recall. The contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 15v313000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The…
TL* takata recall. The contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 15v313000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect. Updated 04/07/16*lj the consumer stated the recall was completed on 03/22/16. *Jb
- Steering
While going around a left hand corner at 45 miles an hour ,i hit some bumps in my lane . The truck ended up half way into the incoming lane.i got it under control and resumed my trip at 45 miles an hour.
- Air bags
TL* takata recall. The contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 15v313000 (air bags); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair.…
TL* takata recall. The contact owns a 2010 dodge dakota. The contact received notification of nhtsa campaign number: 15v313000 (air bags); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Air bags · Power train
TL* the contact owns a 2010 dodge dakota. The contact stated that while driving, the rear axle pinion nut and the drive train fractured. The vehicle was not able to be driven. The vehicle was towed to the contact's residence. The manufacturer was notified of the failure. The vehicle was included in…
TL* the contact owns a 2010 dodge dakota. The contact stated that while driving, the rear axle pinion nut and the drive train fractured. The vehicle was not able to be driven. The vehicle was towed to the contact's residence. The manufacturer was notified of the failure. The vehicle was included in nhtsa campaign number: 12v474000 (power train); and the dealer was not able to schedule the repair in a reasonable timeframe. The contact was also included in nhtsa campaign number: 15v313000 (air bags) and the dealer stated that the part was not available. The approximate failure mileage was 90,800.
- Electrical system · Exterior lighting
TL* the contact owns a 2010 dodge dakota. While driving at various speeds, the left turn signal was turned on and the signal switched to the right turn signal without being prompted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was 50,000.
- Power train
I was attempting to pass a semi. the cruise was set at 70. the semi sped up to 70 also and I had to touch my accelerator to get past him. as I did, my transmission dropped into neutral and I had to let off the accelerator. It dropped back into gear at 65. I was then able to speed up to 75 and pass the semi. I had a line of cars behind me also doing 70. *tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010205Plate - Planetary
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10228093KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221831(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220868Transfer Case Gear Motor/Actuator Installation Guidelines.
- 10220837GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10217614Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with updated software. illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs): MIL Illumination P2096 - Downstream Fuel Trim System 1 Lean (5.7L Engines). P2097 - Downstream Fuel Trim System 1 Rich (5.7L Engines). P2098 - Downstream Fuel Trim System 2 Lean (5.7L Engines). P2099 - Downstream Fuel Trim System 2 Rich (5.7L Engines). Drivability Improvements: **MIL Lamp without DTC Active - Permanent Fault Code Issue (fix permanent fault code retention). ASD Relay (to improve fuel pump relay initialization at key on).** Fuel pump relay operation at key on. Engine seems to lack power at high engine RPMs (5.7L and 4.7L Engines). Shudder or shake condition on wide open throttle stab during downshift event (5.7L and 4.7L Engines). EVAP Diagnostic Enhancements. This diagnostic routine will be disabled while the vehicle is in decel fuel shut off mode.(3.7L/4.7L Engines only). Audible knock sound on WOT launches (DJ/DD 5.7L Engines only). Transmission Improvements: High engine RPMs needed before vehicle will upshift from 3rd to 4th. (5.7L and 4.7L Engines). Harsh 1st to 2nd gear upshift (5.7L and 4.7L Engines). Unexpected or busy downshift while coasting between 72-77 kmh (45-48 mph) (DS 5.7L Engines only).
- 10217514Key Blank With Transmitter The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.
- 10216423Advanced Field Action Communication ? N0802072013 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.
- 10216395Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10216349Advanced Field Action Communication ? M3411302012 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.
- 10212248Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- 10190615Transfer Case Gear Motor/Actuator Installation Guidelines.
- 10190584GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
- 10181451KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik
- 10180221(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10175733Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169246Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10166537RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
- 10159951Flash: MIL Illumination With Transmission And Driveability Improvements This bulletin involves flash reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience a MIL illumination. Upon further investigation the technician may find that any of the following erroneous Diagnostic Trouble Codes (DTCs): ? U0140 - Lost Communication With Body Control Module. 2010 DJ 5.7L (Sales Code EZC) Attempting to clear this DTC will be unsuccessful. ? P050D - Cold Start Rough Idle. ? P2181 - Cooling System Performance has been set. ? P0935 - Line Pressure Sensor Circuit High. All RFE transmissions. P0300 through P0308 - Multiple and Single Cylinder Misfire. This condition can occur when the vehicle is started cold and the driver immediately places the vehicle in drive and applies heavy throttle. Driveability and Transmission improvements are also included with this software release. These changes consist of the following: ? Enhanced clutch protection for more robust torque management during repeated fore and aft movement (rocking vehicle). All engines. ? A revised torque convertor lockup schedule that will reduce transmission temperatures in Tow/Cruise mode. All models equipped with RFE transmission. ? A Clunk sound or feel a shudder when the cruise control resume switch is pressed. This condition is most noticeable after the brakes were pressed to cancel cruise control and then the resume switch is pressed. All models equipped with RFE transmission. ? A shudder or shaking feeling when a wide open throttle (WOT) event is performed by the customer. This is most noticeable after the transmission downshifts during the WOT event. This condition will stop once the transmission upshifts. All models equipped with RFE transmission. ? A shudder or shaking feeling when accelerating from a stop under moderate throttle. This condition will stop once the transmission upshifts. All models equipped with RFE transmission.
- 10140124Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with updated software. illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs): MIL Illumination P2096 - Downstream Fuel Trim System 1 Lean (5.7L Engines). P2097 - Downstream Fuel Trim System 1 Rich (5.7L Engines). P2098 - Downstream Fuel Trim System 2 Lean (5.7L Engines). P2099 - Downstream Fuel Trim System 2 Rich (5.7L Engines). Drivability Improvements: **MIL Lamp without DTC Active - Permanent Fault Code Issue (fix permanent fault code retention). ASD Relay (to improve fuel pump relay initialization at key on).** Fuel pump relay operation at key on. Engine seems to lack power at high engine RPMs (5.7L and 4.7L Engines). Shudder or shake condition on wide open throttle stab during downshift event (5.7L and 4.7L Engines). EVAP Diagnostic Enhancements. This diagnostic routine will be disabled while the vehicle is in decel fuel shut off mode.(3.7L/4.7L Engines only). Audible knock sound on WOT launches (DJ/DD 5.7L Engines only). Transmission Improvements: High engine RPMs needed before vehicle will upshift from 3rd to 4th. (5.7L and 4.7L Engines). Harsh 1st to 2nd gear upshift (5.7L and 4.7L Engines). Unexpected or busy downshift while coasting between 72-77 kmh (45-48 mph) (DS 5.7L Engines only).
- 10140092Advanced Field Action Communication ? N0802072013 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.
- 10140065Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10139985Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10139982Key Blank With Transmitter The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.
- 10139978Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Every Dodge Dakota model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.