2012 Ford F-450 SD
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › F-450 SD › 2012
These records cover every 2012 Ford F-450 SD. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2012 Ford F-450 SD. Newest first.
Ford Motor Company (Ford) is recalling certain model year 2011-2015 Ford F-350, F-450, and F-550 trucks manufactured February 22, 2010, to January 30, 2015, and equipped with ambulance or fire engine preparation packages. The affected vehicles may detect an incorrect Exhaust Gas Temperature Sensor (EGT) fault indicating that the vehicle is too hot…
Risk and remedy
Risk
Engine shut down and a subsequent cool down period may delay medical treatment or assistance to those needing it, increasing their risk of injury.
Remedy
Ford will notify owners, and dealers will update the Powertrain Control Module (PCM) software, free of charge. The recall began on April 22, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S09.
Palfleet Truck Equipment Company, LLC (Palfleet) is recalling certain model year 2009-2013 Ford F-350, F-450, and F-550 super duty vehicles modified by Palfleet and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
Risk and remedy
Risk
The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Remedy
Palfleet will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began on July 29, 2014. Owners may contact Palfleet customer service at 1- 502-376-2458.
Manning Equipment Inc. LLC (Manning) is recalling certain model year 2012-2013 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty vehicles modified by Manning and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
Risk and remedy
Risk
The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Remedy
Manning will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. This action is the same as the service campaign action. The recall began in July 2014. Owners may contact Manning at 1-800-876-8768.
Iowa Mold Tooling Co., Inc. will notify owners and dealers to inspect the Muncie PTO pressure switch to determine if it is from the range of defective switches and if required, remove the pressure switch assembly and put a plug in the port where the PTO switch had been installed. This switch was never being utilized. This will be done free of charge. The…
Risk and remedy
Risk
The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Remedy
Iowa Mold Tooling Co., Inc. will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began on July 28, 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.
Stahl is recalling certain model year 2009-2014 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty vehicles modified by Stahl and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
Risk and remedy
Risk
The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Remedy
Stahl will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. Owners may contact Stahl customer service at 1-800-277-8245, or Muncie at 1-800-367-7867.
Utility Truck Equipment Company, LLC (Utility Truck) is recalling certain model year 2010-2013 UTLI41A, 2011 UTLN41, and 2012 UTLN46 aerial trucks manufactured December 2010 to September 2013 equipped with certain Muncie Power Products PTO Assemblies installed on 2010-2013 Ford F-350, F-450 and F-550 vehicles. In the affected vehicles, oil may leak from…
Risk and remedy
Risk
The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Remedy
Utility Truck will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began in June 2014. Owners may contact Utility Truck customer service at 1-254-857-8813.
Somerset Welding & Steel, doing business as J&J Truck equipment (J&J), is recalling certain model year 2009-2013 Ford F-350, F-450, and F-550 Super Duty chassis with 6.8L gasoline engines modified by J&J to be equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal…
Risk and remedy
Risk
The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Remedy
Somerset will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began August 2014. Owner's may contact Somerset customer service at 1-800-777-2671.
Owner complaints
3 complaints
What owners report most
Latest complaints
- Service brakes · Steering
The a/c compressor just went out for the second time and from what it looks to me IS why the second failure has occurred IS because the dealership did not replace the condenser as was required and also paid for by me. the truck has the "death-wobble" even though I have reinforced the steering in…
The a/c compressor just went out for the second time and from what it looks to me IS why the second failure has occurred IS because the dealership did not replace the condenser as was required and also paid for by me. the truck has the "death-wobble" even though I have reinforced the steering in general and IS very dangerous. However, due to just these two issues and the others it has had which are failed water pump, turbo, starter and hydro-boost brake booster with the water pump going out at about 50,000 miles and then the turbo at about 82,000 miles with the work performed at two different ford dealerships at a very poor quality I replaced the starter myself and the hydro-boost. You cannot trust a dealership when the worked performed IS at best no better than what I can perform. Just like right now or for quite a long time it has had the two field service action items being numbers: 15m02 and 18m01 and after reading the horror stories about and or after a dealership has performed these two functions on other such person(s) vehicles, I most likely will not let a dealership touch mine.
- Service brakes, hydraulic · Steering
Vehicle was initially not running and in driveway. There had been no prior indication of any problem, and no issue noted with on-board diagnostic system. Vehicle had recently been serviced at local ford dealer for oil/filter change. Dealer inspection noted no issues with the vehicle. Vehicle was…
Vehicle was initially not running and in driveway. There had been no prior indication of any problem, and no issue noted with on-board diagnostic system. Vehicle had recently been serviced at local ford dealer for oil/filter change. Dealer inspection noted no issues with the vehicle. Vehicle was cranked up and put into drive. Vehicle experienced a sudden, immediate, and total loss of power steering and brake capability. Vehicle lurched forward. Extreme pressure was applied to brake pedal but it would not stop vehicle from moving forward. Power steering was non-functional causing extreme difficulty in steering vehicle. Vehicle was immediately put into neutral until it slowed enough to put into reverse and stop the vehicle from moving forward. Vehicle almost hit road sign before coming to a stop. Brakes and power steering were non functional. Vehicle was slowly moved backward to get it out of the road path using reverse/neutral positioning. Vehicle was shut off and checked for possible loss of power steering/brake booster system fluid. Fluid level was just below maximum level mark, so no loss of fluid in power steering/power braking booster system had occurred. Upon restart, power steering system was marginally functional with grinding noise coming from power steering/power braking booster system when steering wheel turned or brake pedal applied. Pulsating feel coming from brake pedal when pressure applied. power brakes were still non-functional. Vehicle was not drivable due to complete loss of braking function and only marginal steering function. Vehicle had to be towed to ford dealer for diagnostic testing. After 4 days, dealer has still not looked at vehicle.
- Electrical system
As per your odi resume #rq14-005, my rv built on 2012 chassis experienced egt sensor malfunction to number 13 and 14. This occurred on I-75 outside of lexington, ky. I was very lucky to be in the right lane and just barely pulled to the shoulder before the engine shutdown. Had to call state police…
As per your odi resume #rq14-005, my rv built on 2012 chassis experienced egt sensor malfunction to number 13 and 14. This occurred on I-75 outside of lexington, ky. I was very lucky to be in the right lane and just barely pulled to the shoulder before the engine shutdown. Had to call state police because of the close proximity to travel lane and very dangerous situation for other vehicles. This trip started in clemmons, nc, and included 2 tunnels which could have been a disaster if the incident occurred in either one. Called ford about recall for ambulance chassis since this seems to be same type. They stated the computer program IS different and therefore the recall does not pertain to my unit. *tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Vehicle Commanded Engine Shutdown
The Office of Defects Investigation (ODI) opened this RQ to investigate allegations that the scope and remedy of safety recall 13V-535 were inadequate. Recall 13V-535 was limited to a relatively small population of Ambulance Package vehicles and ODI received complaints of pickup trucks and Fire Engine Prep Package…
The Office of Defects Investigation (ODI) opened this RQ to investigate allegations that the scope and remedy of safety recall 13V-535 were inadequate. Recall 13V-535 was limited to a relatively small population of Ambulance Package vehicles and ODI received complaints of pickup trucks and Fire Engine Prep Package vehicles being affected by the same defect. Ford manufactured approximately 555,985 subject vehicles between February 22, 2010 and January 30, 2015 that may be affected by defective EGT sensors and Powertrain Control Module (PCM) software calibration. The subject vehicles are equipped with four (4) EGT sensors to monitor engine operating conditions. An EGT sensor fault may produce false exhaust over-temperature signals. If these signals are produced, the Powertrain Control Module (PCM) implements a Failure Management Effects Mode (FMEM) and the driver receives a Stop Safely Now (SSN) system warning on the instrument cluster message center. The FMEM triggers a 70% reduction in available engine power over a period of no more than 45 seconds, during which it may not be possible to accelerate or maintain vehicle speed. The PCM then commands the engine to shut down when vehicle speed reaches approximately 1 mph. There is no immediate restart capability. Depending on the PCM software calibration, ignition key position and ambient temperature conditions, the engine may not restart until the end of a 10-60 minute cool down period.Ford and its component supplier(s) made numerous changes to the PCM software calibration and the design, material and manufacture of the EGT sensors over the period of subject vehicle production. This continuous product improvement affected vehicle performance regarding the alleged defect. Ford acknowledges the defect condition in the subject vehicles but argues that an unreasonable risk to motor vehicle safety is limited to Ambulance Package and Fire Engine Prep Package vehicles where commanded shutdown could impact emergency response and patient care. Ford also argues that the defect trend is in decline. Ford also initiated a new safety recall (15V-175) to address the 13V-535 remedy concerns in the Ambulance Package vehicles and Fire Engine Prep Package vehicles. The 15V-175 remedy reprograms the PCM with a new software calibration that stops a single EGT sensor fault to cause the vehicle to enter the FMEM shutdown mode.Ford also initiated an EPA emissions recall (14E03) for all subject vehicles that reprograms the PCM with the software calibration employed in safety recall 15V-175. Finally, Ford initiated a Customer Satisfaction Program (15M01) providing extended warranty coverage of 8 years or 80,000 miles for the the EGT sensors on certain MY2011-2012 subject vehicles.Due to the EPA emissions recall, that had a 66.6% completion rate in Ford's December 2015 progress report to the EPA, the defect trend is in decline. ODI is not aware of any crashes, deaths or injuries related to the alleged defect.ODI believes the alleged defect poses a safety risk but notes that the EPA emissions recall is addressing the safety problem.Compelling issuance of a duplicate recall would not represent a wise use of agency resources.Accordingly, this Recall Query is closed.This action is not a finding that no defect exists and NHTSA will take further action if such action is warranted.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10249483Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074 Adding owner letter and corrected dealer bulletin. First Part submitted 11/01/23
- 102491752024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.
- 10248068Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with 6.7L Diesel Engine State Inspection and Maintenance Testing Failure Due to DTCs P2073 and/or P2074
- 10244684Customer Satisfaction Program 22N14 Supplement #1 Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine - State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074
- 102377892011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26C (80F) and may increase to 1200 RPM at -40 C (-40F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10228867Some 2011-2022 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 F (65 C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
- 10222521Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine Powertrain Control Module Reprograming for Inspection and Maintenance Testing
- 10211955Certain 2011-2014 Model Year Super Duty Vehicles Equipped with a 6.7L Diesel Engine Exhaust Gas Recirculation Cooler with Diagnostic Trouble Codes P0401 and/or P2457 - In some of the affected vehicles, customers may experience an illuminated malfunction indicator light due to the EGR cooler becoming plugged with hydrocarbon or soot at high mileage. Diagnostic trouble codes (DTCs) for EGR cooler efficiency below threshold (DTC P0401) and/or insufficient EGR flow at idle (DTC P2457) are stored when the malfunction indicator light is illuminated.
- 102093842011-2022 F-Super Duty and 2016-2023 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26C (80F) and may increase to 1200 RPM at -40 C (-40F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
- 10209377Some 2011-2012 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P2073 and/or P2074 stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
- 10206863Customer Satisfaction Program 21M04 Certain 2011-2014 Model Year Super Duty Vehicles Equipped with a 6.7L Diesel Engine Exhaust Gas Recirculation Cooler with Diagnostic Trouble Codes P0401 and/or P2457
- 10205475Some 20112014 F-Super Duty vehicles equipped with 6.7L diesel engine may experience an exhaust leak due to broken exhaust manifold studs. New parts have been released to service this condition. Replace the exhaust manifold on the side with a broken stud. On cylinders 1,2,3,5,6 and 7 use stud part number W715713-S431. If replacing the studs on cylinders 4 and/or 8 use stud part number W717172-S900 and replace both studs and install new spacers and heat shields on the affected side(s). Refer to Workshop Manual, Section 303-01. Part numbers: heat shield left side, FC3Z-9Y427-A and DC3Z-9A462-B for the right side. Spacer part number FC3Z-00810-A. Exhaust manifold part numbers: DC3Z-9430-A (right) and DC3Z-9431-A (left). Exhaust Manifold Gasket FC3Z-9448-A. Exhaust Manifold Nut W701706-S430.
- 102050296.7L Diesel - fuel knock at idle with malfunction indicator lamp (MIL) Illulminated with multiple diagnostic trouble codes (DTCS)
- 10205025602L/6.8L - Illuminated MIL with diagnostic trouble codes (DTCSF) P0627, P025B, P025A, and/or U019 - Built on or before 04/06/2016
- 10205022Torqshift Transmission - Malfunction indicator lamp (MIL) diagnostic trouble codes (DTCS) P0751, P0730 and/or P2700
- 102050146.7L Diesel - Fuel knock at idle with malfunction indicat or lamp (MIL) Illuminated with multiple diagnostic trouble codes (DTCSF)
- 102049996.7L Malfunction indicator Lamp (MIL) Illuminatedc with diagnostic trouble codes (DTCS p208E, p218F, p204F
- 1020498749 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
- 1020498649 CFR Part 579.5 Monthly Communications - January 2016
- 10204983Exterior Mirror - Tubular stainless steel west cpast style mirror - Loose mounting bracket
- 10194421Some 2011-2021 vehicles equipped with a diesel engine may have engine oil in the exhaust after turbocharger replacement for various reasons. To correct the condition, remove the exhaust and stand the exhaust up with the turbocharger inlet side facing down using a suitable drain pan. Allow the exhaust to drain for at least 24 hours and reinstall. Do not perform a manual exhaust regeneration.
- 10186678Some 2005-2021 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
- 101865672011-2021 F-Super Duty and 2016-2021 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit a high/elevated idle condition. During prolonged idle time, vehicles may experience this high/elevated idle to reduce buildup of unburned hydrocarbons from the SCR system. The powertrain control module (PCM) estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 revolutions per minute (rpms) for ambient temperatures near 26C (80F) and may increase to as high as 1200 rpms at -40 C (-40F). These elevated idle periods can last from 20-40 minutes, depending on ambient temperatures. During power take off (PTO) use and already using idle set point control, the elevated speed is disabled. It is required that the operator monitor the vehicle and adhere to the Exhaust Filter warning messages.
- 10183761Some 2012-2016 F-Super Duty vehicles equipped with a 6.2L or 6.8L engine built on or before 4/6/2016 may exhibit an illuminated malfunction indicator lamp (MIL) with DTCs P0627, P025A, P025B and/or U0109 stored in powertrain control module (PCM) memory.
- 10179325Some 2011-2020 F-Super Duty, 2015-2019 Transit, 2016-2021 F-650/F-750 and 2018-2020 F-150 vehicles equipped with a 6.7L, 3.2L or 3.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P207F, P20EE, P229F, P2201 and/or P24AE. This may be a result of using aftermarket cleaning liquids or tools for the exhaust gas recirculation (EGR) cooler or intake. Ford does not recommend the cleaning of diesel intakes or EGR coolers using any aftermarket tool that injects a cleaning foam or liquid substance into the EGR cooler or intake. Using these types of fluids can result in sodium poisoning of the NOx and particulate matter (PM) sensors resulting in degraded operation and permanent damage to the after treatment system. Use of these cleaning tools may void the emissions warranty of the hot end after treatment exhaust system and the attached emissions sensors.
- 10170992Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
- 10164598Some remanufactured 6.7L diesel engines recently installed in 2011-2014 F-Super Duty vehicles may exhibit a lack of power with engine oil temperature (EOT) exceeding 125C (257F) under loads. This may also be accompanied by REDUCED ENGINE POWER being displayed in the message center and the coolant temperature gauge indicating H. This symptom may be due to a missing metering cup plug in the upper oil pan causing reduced oil flow through the oil cooler. Remanufactured engines built on 1-Mar-2019 and through 13-May-2019 may be affected. If a vehicle exhibits this concern, use the Report a Vehicle Concern link at the bottom of the OASIS tab and submit a report. Include the engine serial number and engine build date in the report. The dealership may be contacted for further details and possible repair direction.
- 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
- 10164497For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
- 10163595Customer Satisfaction Program 18M05 Certain 2011-2012 Model Year F-450 and F-550 Vehicles Equipped with a 6.7L Engine Turbocharger Extended Warranty Coverage
- 10162082Some 2011-2019 F-Super Duty vehicles equipped with a 6.7L engine may come in for scheduled maintenance on the engine mounted fuel filter. When reconnecting a fuel line quick connect fitting back onto the engine mounted fuel filter housing, push the connector all the way onto the fuel filter connection port. For some vehicles, you may need to depress a retainer clip to lock the quick connect port into place. Once the fitting is latched fully onto the connection port, pull straight backward on the fuel line to verify it is fully latched onto the connection port. Do not bend the fuel line connection when pulling to verify it is connected. Refer to Workshop Manual sections 310-00 for details on quick connect fittings.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10160885Some 2005-2019 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
- 10160871Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a lack of power and/or illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0299 in the powertrain control module (PCM). This may be due to the charge air cooler (CAC) outlet tube assembly becoming disconnected at the throttle body or a separation at the CAC tube crimp clamp. To resolve this concern, follow the Service Procedure steps to replace the CAC outlet tube assembly.Follow the service procedure steps to correct the condition.
- 10159494SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10156889Some 2011-2019 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking/tapping noise traced to the reductant injector.
- 10156600Some 2012-2016 F-Super Duty vehicles may exhibit a battery cable clamp corrosion concern at the positive battery terminal. It is not necessary to replace the complete battery cable harness CC3Z-14300-A for this concern. Positive battery cable clamp BT4Z-14450-AA is available and can be used to replace just the corroded terminal. Do not cut or shorten the battery cable, but instead remove the corroded battery cable clamp and clean the cable end as necessary. Bend the new battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
Every Ford F-450 SD model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.