2013 Ford F-650 SD

Recalls

1 recall names the 2013 Ford F-650 SD. Newest first.

• Seat belts › Front › Anchorage

  Aug 20, 2015NHTSA 15V53300025,941 vehicles

  Ford Motor Company (Ford) is recalling certain model year 2011-2013 and 2015 Ford F-650, and F-750 trucks manufactured February 14, 2011, to April 28, 2015, and equipped with a 70% fixed bench passenger seat. The affected vehicles have passenger seat belt anchorage floor attachments that are not installed in the correct location. As such, these vehicles…

  Risk and remedy

  Risk

  Seat belt anchors that are installed in an incorrect location may increase the risk of occupant injury in the event of a crash.

  Remedy

  Ford will notify owners, and dealers will correct the seat belt anchorage locations, free of charge. The recall began on November 12, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15C09.

  Full recall details →

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
• 102491752024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.
• 102377892011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26C (80F) and may increase to 1200 RPM at -40 C (-40F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
• 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
• 102050296.7L Diesel - fuel knock at idle with malfunction indicator lamp (MIL) Illulminated with multiple diagnostic trouble codes (DTCS)
• 10205026Exterior mirror - tubular stainless steel west coast style mirror - loose mounting bracket
• 10205025602L/6.8L - Illuminated MIL with diagnostic trouble codes (DTCSF) P0627, P025B, P025A, and/or U019 - Built on or before 04/06/2016
• 10205022Torqshift Transmission - Malfunction indicator lamp (MIL) diagnostic trouble codes (DTCS) P0751, P0730 and/or P2700
• 102050146.7L Diesel - Fuel knock at idle with malfunction indicat or lamp (MIL) Illuminated with multiple diagnostic trouble codes (DTCSF)
• 102049996.7L Malfunction indicator Lamp (MIL) Illuminatedc with diagnostic trouble codes (DTCS p208E, p218F, p204F
• 1020498749 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
• 1020498649 CFR Part 579.5 Monthly Communications - January 2016
• 10204983Exterior Mirror - Tubular stainless steel west cpast style mirror - Loose mounting bracket
• 10183765Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a fuel knock type noise at idle, illuminated MIL with one or more of the following DTCs: P0263, P0266, P0269, P0272, P0275, P0278, P0281, P0284,
• 10183761Some 2012-2016 F-Super Duty vehicles equipped with a 6.2L or 6.8L engine built on or before 4/6/2016 may exhibit an illuminated malfunction indicator lamp (MIL) with DTCs P0627, P025A, P025B and/or U0109 stored in powertrain control module (PCM) memory.
• 10156889Some 2011-2019 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking/tapping noise traced to the reductant injector.
• 10156886Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
• 10155577Some 2011-2019 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking/tapping noise traced to the reductant injector.
• 10155574Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
• 10148731Some 2013-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated MIL with only DTC P2074 stored in the powertrain control module (PCM). This may be due to a dirty air filter, replace the filter if necessary. Do not replace the PCM or mass air flow (MAF) sensor for this concern. Instead perform a MAF parameter reset under: Toolbox > Powertrain > Service Functions > Reset/Clear Specified Function > Reset/Clear Functions > MAF Sensor. Engineering is investigating. Monitor OASIS for updates.
• 10144224Certain 2012-2016 Model Year F-450 ? F-750 and F-59 Commercial Stripped Chassis Vehicles Equipped with a 6.8L Engine Camshaft Roller Follower Replacement Coverage
• 10144202When performing diagnostics for DTCs P2201, P2452, P2459, P246C and/or P2463, a manual regeneration and diesel particulate filter (DPF) parameter reset using the appropriate scan tool may need to be performed. To perform the manual regeneration, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Manual Regeneration. The scan tool may indicate that a regeneration of the DPF is not recommended at this time, selecting YES on this screen will allow the regeneration process to complete. To perform the DPF parameter reset, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Parameter Reset.
• 10140328Some 2011-2018 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 ?F (65 ?C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
• 10138529Some 2011-2018 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 ?F (65 ?C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
• 10138524The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
• 10137150Certain 2018 Model Year Escape and MKC Vehicles - Transmission Bell Housing Bolt TorqueCertain 2012-2016 Model Year F-450 ? F-750 and F-59 Commercial Stripped Chassis Vehicles Equipped with a 6.8L Engine - Camshaft Roller Follower Replacement
• 10127405Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
• 10125090Some 2011  2014 SuperDuty vehicles equipped with 6.7L Diesel engine may experience an exhaust leak due to broken exhaust manifold studs. New parts have been released to service this condition. Replace the exhaust manifold on the side with a broken stud. On cylinders 1,2,3,5,6 and 7 use stud part number W715713-S431. If replacing the studs on cylinders 4 and/or 8 use stud part number W717172-S900 and replace both studs and install new spacers and heat shields on the affected side(s). Refer to Workshop Manual Section 303-01. Part numbers: Heat shield left side, FC3Z-9Y427-A and DC3Z-9A462-B for the right side. Spacer part numbers: FC3Z- 00810-A. Exhaust manifold part numbers: DC3Z-9430-A (RH) and DC3Z-9431-A (LH). Exhaust Manifold Gaskets: FC3Z-9448-A. Exhaust Manifold Nut: W701706-S430
• 100994632009-2017 vehicles equipped with a 6R80, 6r100, 6r140 automatic transmission have an updated main control valve body overhaul procedure. Refer to workshop manual (wsm), section 307-01 for main control valve body (7a100) overhaul procedures. Not all valve bodies require replacement. Inspect the valve body bores, springs and valves as directed during diagnosis and repair. Refer to general service bulletin (gsb) g0000093 automatic transmission main control inspection for a video clip to aid in the diagnosis of these repairs.
• 10095963Some 2011-2016 f-super duty vehicles equipped with a 6.7L diesel engine, may exhibit an illuminated mil with dtcs p208e and/or p218f stored in the powertrain control module (pcm) memory due to urea crystals forming on the reductant injector nozzle. Follow the service procedure steps to correct the condition.
• 10095851Some 2011-2017 f-super duty 6.7L diesel equipped vehicles may exhibit a ticking noise at idle after an engine oil change. It IS often referred to as typewriter noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 f (65 c) or higher, (from engine idle up to approximately 1700 rpm's), this noise can typically be heard at the front wheel well and IS often isolated to the transmission bell housing or oil pan area. Typewriter noise IS not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise IS characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
• 10095225Some 2005-2017 f-super duty 4X4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4X4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit IS now available for customer purchase. The kit IS designed for severe duty and IS non warrantable. The knuckle seal shield kit gc3z-54024a38-a includes an instruction sheet.
• 10095184Replacing the original equipment sync/navigation system with either an aftermarket sync/navigation kit or modifying original sync/navigation parts to provide additional features IS not recommended nor supported on any ford, mercury or lincoln vehicle. Only approved genuine ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: monroney label (window sticker), professional technician society (pts) oasis tab  select sync or hvbom. For genuine ford accessories use: pts workshop tab  select dealer installed accessory or accessory installation.
• 10095154To help differentiate engine oil leaks from other possible sources, a new white-colored fluorescent engine oil dye IS available. Workshop manual (wsm), section 303-00 has been revised to reference the new white-colored dye. The new white fluorescent dye provides a distinct white glow to identify engine oil leaks. The new white fluorescent dye requires a pure uv diagnostic inspection lamp. The white-colored fluorescent dye and pure uv lamp are now in the rotunda catalog. Dye and lamp part numbers. Gasoline only dye: 1 ounce bottle 164-tp-33200601. Diesel only dye: 8 ounce bottle: 164-tp-3320-0008. Pure uv diagnostic inspection lamp 164-tp8695 or 164-r3748.
• 10091205Some 2011-2016 f-super duty vehicles equipped with a 6.7L diesel engine that are primarily in a stationary or off-highway low speed use may exhibit frequent exhaust regeneration attempts, drive to clean maintenance messages, the wrench light on and/or diagnostic trouble code (dtc) p2459 for frequent regeneration. If regeneration attempts are unsuccessful, dtc p2463 may set as a result of soot accumulation in the diesel particulate filter (dpf). Vehicles operated in this manner may not easily allow for normal exhaust regeneration and may benefit from ocr capability so the unit can perform complete regeneration cycles in a stationary setting. Follow the service procedure steps to correct the condition.
• 100911502011-2016 f-super duty equipped with optional running boards - operating vehicle off-road or low ground clearance - damage to side sill
• 10090502Some 2011-2016 f-super duty pickup vehicles built on or before 23-feb-2016 and equipped with a 6.7L diesel engine may exhibit a runs rough/misfire condition only during the exhaust regeneration process. This condition typically occurs on light throttle tip in between 64-113 km/h (40-70 mph) and will not set diagnostic trouble codes (dtcs). The concern may be intermittent and a knocking noise may be present during the concern. Follow the service procedure steps to correct the condition.
• 10090424Some 2013-2016 f-super duty vehicles equipped with a 6.7L diesel engine may exhibit an illuminated mil with dtc p218f (reductant no flow detected) stored in the powertrain control module (pcm) memory. Reprogram the pcm to the latest calibration using ids release 102.03 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.
• 10078990Siri eyes free functional issues using bluetooth and apple ios 9.2 and 9.2.1
• 10078975Some 2011-2016 f-super duty crew cab pickup vehicles equipped with an 8 foot box and a factory trailer hitch may exhibit a vertical vibration, often described as hopping, from 68-112 km/h (42-70 mph).

Every Ford F-650 SD model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.