2014 Ford Flex
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2014 Ford Flex. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2014 Ford Flex. Newest first.
Ford Motor Company (Ford) is recalling certain 2013-2018 Lincoln MKT and Ford Flex and Taurus vehicles with the Police Interceptor or SHO Performance Pack. The rear suspension toe links may fracture due to stress on the rear suspension.
Risk and remedy
Risk
A fractured rear toe link will cause a sudden change in vehicle handling and increase the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the rear suspension toe links, free of charge. Remedy parts are not currently available. Owners were notified about the recall on March 3, 2020. A second notice will be mailed when remedy parts become available, which is currently expected to be the end of September 2020. The recall began October 28, 2020. Owners may contact Ford customer service at 1-866-436-7332 or Lincoln customer service at 1-800-521-4140. Ford's number for this recall is 20S04.
Ford Motor Company (Ford) is recalling certain model year 2013-2015 Ford Taurus, Ford Flex, Lincoln MKS and Lincoln MKT vehicles equipped with 3.5L GTDI Ecoboost engines and 2013-2015 Ford Taurus Police Interceptor vehicles. A component within the fuel pump electric module (PEM) may overheat causing a loss of electrical power to the fuel pump.
Risk and remedy
Risk
A loss of power to the fuel pump will cause the engine to stall or prevent the vehicle from starting, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will inspect the fuel PEM part number and replace the fuel PEM, as necessary, free of charge. The recall began on December 1, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S31.
Ford Motor Company (Ford) is recalling certain model year 2014 Ford F-150 and Flex vehicles manufactured March 1, 2014, to May 31, 2014. The affected vehicles were manufactured with a reduced clearance between the seat frame and the seat track assembly. This can cause the Occupant Classification System (OCS) to inaccurately register passenger weight and…
Risk and remedy
Risk
Improper suppression of the passenger airbag increases the risk of an injury to the seat occupant in the event of a crash necessitating deployment of the front passenger airbag.
Remedy
Ford will notify owners, and dealers will widen the gap between the seat frame and seat track assembly and recalibrate the seat OCS, free of charge. The recall began November 25, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14C10.
Ford Motor Company (Ford) is recalling certain model year 2012-2014 Ford Edge and Lincoln MKX vehicles manufactured September 2, 2010, to November 30, 2013; 2013-2014 Ford Taurus and Lincoln MKS vehicles manufactured August 25, 2011, to November 30, 2013; and 2013-2014 Ford Flex and Lincoln MKT vehicles manufactured September 12, 2011, to November 30, 2013.…
Risk and remedy
Risk
If the halfshaft and linkshaft become disengaged while driving, power will no longer be transmitted to the wheels, increasing the risk of a vehicle crash. Additionally, if the parking brake is not applied before exiting the vehicle, the vehicle may roll away despite the transmission being placed in 'Park', increasing the risk of injury to exiting occupants and bystanders.
Remedy
Ford will notify owners, and dealers will inspect the vehicles to make sure that the halfshaft is properly retained. If it is not, dealers will replace the linkshaft and also replace the halfshaft if it shows evidence of spline damage, free of charge. The recall began on August 4, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S10.
Owner complaints
249 complaints11 involved a crash2 involved a fire10 injuries
What owners report most
Latest complaints
- Fuel/propulsion system
Hello, I was driving my Ford Flex at 60mph yesterday with my 15 year old friend helping me move. The engine completely died for several seconds and continued running. That night the engine was idling rough which was a new symptom. Today, I made it to my destination and the car died, then it did not…
Hello, I was driving my Ford Flex at 60mph yesterday with my 15 year old friend helping me move. The engine completely died for several seconds and continued running. That night the engine was idling rough which was a new symptom. Today, I made it to my destination and the car died, then it did not start after cranking. The Fuel pump module Aa8a-9d412-ca was faulty and now I am out $142+ from Ford to replace a part myself that is a known problem on the Ecoboost engines for this vehicle. This is a liability and I am seeking reimbursement for this known issue. Please issue a recall for this fuel pump module, everyone's safety is at risk that still has this faulty part installed that Ford has not addressed. Thank you for your time.
- Electrical system
I noticed about 6 months ago, the Backup camera has been cutting out randomly, and has been getting worse. I noticed that there is a recall for 2015 - current models of Ford Flex for this issue. Not sure why the 2014 model isn't a part of the recall, as my car seems to be doing the exact thing described in the recall.
- Unknown or other
Back up camera IS disabled when backing up. It IS not consistent with backing up making it a safety concern. The beeping seems to work but the camera will be black.
- Steering
I was driving down a main road going 45 MPH when my steering wheel locked up and I got a message on my dash to service advanced steering. I was unable to turn my steering wheel in any direction and had to pull over in order to not be involved in a collision.
- Back over prevention
The contact owns a 2014 Ford Flex. The contact stated that while in reverse, the back over prevention camera displayed a black screen, and the message “Camera not Available” was displayed. The contact stated that turning off and restarting the vehicle, and waiting for the cellphone to connect to…
The contact owns a 2014 Ford Flex. The contact stated that while in reverse, the back over prevention camera displayed a black screen, and the message “Camera not Available” was displayed. The contact stated that turning off and restarting the vehicle, and waiting for the cellphone to connect to Bluetooth on the radio, the camera operated as needed and provided an image of the rear of the vehicle while reversing. The failure was intermittent. The vehicle was taken to a certified mechanic and diagnosed with a camera failure. The mechanic performed a troubleshooting of the camera and determined that the camera needed to be replaced. The manufacturer was not notified of the failure. The failure mileage was approximately 74,000.
- Electrical system · Engine
After reporting to work on [XXX], I discovered that the front of my vehicle was on fire. Emergency services were immediately contacted, and employees on site attempted to contain the fire using fire extinguishers. The fire department arrived shortly thereafter and successfully extinguished the…
After reporting to work on [XXX], I discovered that the front of my vehicle was on fire. Emergency services were immediately contacted, and employees on site attempted to contain the fire using fire extinguishers. The fire department arrived shortly thereafter and successfully extinguished the fire. Despite these efforts, the vehicle was ultimately deemed a total loss. Later that day, my sister advised me to review footage from our Ring camera from that morning. The video shows visible sparks coming from underneath my vehicle prior to my departure. At that time, I drove approximately nine miles to work, unaware of any issue with the vehicle. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Unknown or other
BACKUP CAMERA FAILED Safety was put at risk because there was no functional camera while the vehicle was in reverse. Dealer confirmed backup camera failure. Dealer inspected the backup camera and determined it needed to be replaced. There were no warnings, messages, or other symptoms of the problem prior to the failure. Mileage 163,483 Replaced 12/31/2024
- Electrical system · Structure › Body
I know that the 2015-2019 Ford Flex is being recalled for rear camera issues and "B" pillar mldgs. coming loose. My 2014 Flex has these same issues. What about earlier models?
- Steering
Auto “steering assist failure” occurred, very difficult to steer, very dangerous and could have caused wreak if actively driving when it failed. Dash light indicates steering assist failure. Appears this is an ungoing problem with ford flex vehicles since 2010 I do not see recall for my 2014…
Auto “steering assist failure” occurred, very difficult to steer, very dangerous and could have caused wreak if actively driving when it failed. Dash light indicates steering assist failure. Appears this is an ungoing problem with ford flex vehicles since 2010 I do not see recall for my 2014 flex but same issues had recalls for flex up to 2013. I am reporting due that I believe this is a very serious issue on ford flex vehicles and has great potential to cause severe accident if occurring while driving. I believe there should be recalls for this issue requiring Ford to repair the safety risk.
- Back over prevention › Warnings · Unknown or other
The rear backup camera is upside down. The rear backup distance alarm doesn't work. This has been recalled in other years. The price to repair in unreasonable. Its like not having a rear camera. This is a common Problem. Please help.
- Back over prevention · Engine
The contact owns a 2014 Ford Flex. The contact stated that occasionally, while attempting to reverse, the image on the back over prevention camera was displayed upside down. Additionally, the check engine warning light remained illuminated. The local dealer was not contacted, and the vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 120,000.
- Electrical system
Rear camera view is inverted or not displayed when reversing. Unsafe to back vehicle due to this failure. Has not been diagnosed/repaired by a service center. Has not functioned properly for 7-8 years.
- Forward collision avoidance › Warnings · Steering · Suspension
Without warning, the vehicle's power steering stopped working in an intersection while turning. The hazard lights came on automatically and I used my full body strength to steer the car out of the intersection. Inspection showed a computer module failure within the steering rack. Because the…
Without warning, the vehicle's power steering stopped working in an intersection while turning. The hazard lights came on automatically and I used my full body strength to steer the car out of the intersection. Inspection showed a computer module failure within the steering rack. Because the computer module is built into the steering rack, the whole steering rack needed to be replaced. This was a critical repair and cost over $3500.
- Electrical system · Unknown or other
The back-up camera is malfunctioning. Either appear blank or will work for about 5 seconds then go blank. Took to mechanic and was confirmed as malfunctioning per codes, but wasn't able to completely diagnose.
- Unknown or other
I own a 2014 Ford Flex, and I have been experiencing recurring issues with the rear backup camera. The problems included the camera intermittently going in and out of service, displaying fuzzy or unclear images, and at times showing the video feed upside down. These issues closely resemble known…
I own a 2014 Ford Flex, and I have been experiencing recurring issues with the rear backup camera. The problems included the camera intermittently going in and out of service, displaying fuzzy or unclear images, and at times showing the video feed upside down. These issues closely resemble known problems covered under existing Ford recalls related to backup camera malfunctions caused by software update errors. Due to ongoing safety concerns, I took my vehicle to an authorized Ford dealership on August 21, 2025, for diagnosis and repair. The dealership confirmed the failure of the backup camera system. To resolve the issue, they diagnosed, replaced the rear backup camera, and reprogrammed the system. The total cost of the service was $638.78. Given the similarity of this failure to the symptoms covered under previous Ford recalls, I believe this issue may be related and warrants further review.
- Unknown or other
Within the last 90-120 days the back up camera on our 1014 Ford Flex has started not working properly. It sometimes works, sometimes only a video with now parking lines, sometimes nothing at all and a blank screen. Sometimes it does all of the above in the same instance.
- Steering
The power steering system failed and requires brute force to turn the wheel. The software system was reflashed but this did not fix the problem. There was a recall for this issue from 2011-2013, but not for our year. There is not a warning light on.
- Back over prevention › Warnings · Unknown or other
The camera shows upside down and rear parking aid doesn't work. Recall 25v442000 is for the same thing. But ford dealer said it doesn't apply.
- Back over prevention
The contact owns a 2014 Ford Flex. The contact stated while driving and attempting to reverse, the rear-view camera image was upside down or occasionally there was a blank screen. There was no warning light illuminated. A dealer was contacted. The vehicle was not taken to a dealer or an independent…
The contact owns a 2014 Ford Flex. The contact stated while driving and attempting to reverse, the rear-view camera image was upside down or occasionally there was a blank screen. There was no warning light illuminated. A dealer was contacted. The vehicle was not taken to a dealer or an independent mechanic to be diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 25V442000 (BACK OVER PREVENTION); however, the VIN was not included in the recall. The manufacturer was not notified of the failure. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was 122,000.
- Steering · Suspension
I have a 2014 Ford Flex. My axle shaft came undone while driving. My Ford flex was manufactured 07 of 13 my mechanic said that there's a recall for your front axle shaft on the passenger side and it falls within the guidelines of the affected vehicles but Ford says that it's not covered. My vin was never added to the recall and it’s the same exact issue that the others had for that year.
- Electrical system · Unknown or other
Faulty back up camera. Shows inverted and distorted image, or fails to operate at all. Has been an issue for about 3 years.
- Steering
Driving along and all of a sudden steering will be very difficult to turn - and there is play in the steering wheel. Not being able to turn safely, puts my family at risk. There are no warning lights or alarms that have shown up.
- Engine · Steering
The contact owns a 2014 Ford Flex. The contact stated that while driving at various speeds; the vehicle lost automotive power and the steering wheel was pulling to the left and was difficult to turn in either direction. No warning light was illuminated. An appointment with the local independent…
The contact owns a 2014 Ford Flex. The contact stated that while driving at various speeds; the vehicle lost automotive power and the steering wheel was pulling to the left and was difficult to turn in either direction. No warning light was illuminated. An appointment with the local independent dealer was scheduled to inspect the vehicle. The local dealer was contacted; however, the vehicle was not diagnosed or repaired due to the Year, Make, and Model being outside the selected VIN range. Upon further investigation, the contact related the failure to an unidentified NHTSA Campaign; however, the VIN was not included. The manufacturer was notified of the failure but provided no assistance. The failure mileage was approximately 130,400.
- Electrical system
Rear back up camera has stopped working
- Unknown or other
Front Control Interface Module failure resulting in unresponsive climate controls and audio. The issue starts with the audio stopping, followed by the HVAC turning off and then followed by defrosters turning on full blast. No warning prior to these turning off. HUGE safety issue with the heater turning on FULL BLAST, baking anyone inside the vehicle. I have had the issue for several years without any true solutions.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10205031Touchscreen navigation system - arabic language - blank screen
- 10180428Some 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual (WSM), Section 303-00 General Information > Diagnosis and Testing > Engine > Engine Oil Leaks - Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards (SLTS) Manual.
- 10172972SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
- 10164596Some 2013-2020 vehicles equipped with an EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function. To support the proper diagnosis of this compressor, the EVDC control valve tester has been provided to each U.S. dealership (339-EVDC100). Ensure the A/C system has a full charge prior to any compressor diagnostics. To support the proper diagnosis of this compressor, the EVDC compressor tool must be used, and the results recorded in the Technician comments field with the warranty claim. This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
- 10164497For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
- 10163573Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Use pigtail harness service part numbers 3U2Z-14S411-ZEA or CU2Z-14S411-FA, as both parts are interchangeable. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures.
- 10162086Some 2015-2017 F-150/Mustang, 2015-2018 Edge/MKC, 2016-2018 MKX, 2013-2018 Explorer/Taurus/Flex/MKT, and 2017-2018 Fusion/MKZ/Continental vehicles built on or before 19-Oct-2017 may exhibit an inoperative adaptive cruise control, collision warning, and/or collision avoidance system with a Pre-Collision Assist Not Available, Collision Warning Not Available, and/or Adaptive Cruise Fault message present in the instrument panel cluster (IPC) and diagnostic trouble code (DTC) U3000:49 present in the cruise control module (CCM). To resolve the condition, reprogram the CCM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 9E731 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10160880Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10159494SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10159489Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10156877Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
- 10155565Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
- 10153969Some 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.
- 10152473For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. For all turbocharged engine applications, the turbocharger oil supply filter (6C683 gas engine/6L625 connector style or 6A968 diesel engine) must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10140323The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10138524The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10137131Some 2007-2016 Edge/MKX/Flex/MKT/MKZ/MKS/Taurus/Police Interceptor Sedan/Explorer/Police Interceptor Utility vehicles equipped with AWD and built on or before 30-Jun-2016 may exhibit a propane or natural gas odor during idle or low speed driving. This may be due to break down of the power transfer unit (PTU) fluid caused by excessive heat. If the source of the odor is identified as originating from the PTU, an idler bearing repair kit is available to repair the PTU. Refer to the Workshop Manual (WSM), Section 308-07. If the PTU is determined to be repairable, utilize kit GB5Z-7P258-A and the included instruction sheet. For claiming use causal part 7P258 and applicable labor operations in section 07 of the Service Labor Time Standards (SLTS) Manual.
- 10137113Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
- 101365972010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
- 10127405Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
- 10115953Some 2013-2017 Edge/MKX/Escape/MKC/Fusion/MKZ/Flex/MKT/Mondeo/Kuga/EcoSport AWD vehicles where diagnosis leads to a RDU clutch issue, a rear drive unit (RDU) service kit is available. Use the vehicle identification number (VIN) in the parts catalog to look for base part 4A232. If clutch assembly (base 4A232) is not listed in the catalog, this message does not apply. For vehicle repairs refer to updated Workshop Manual (WSM), Section 205-02 on ATC clutch repairs. Use causal part 4A232 or equivalent and applicable labor operations.
- 10109079Some vehicles may have a concern where the safety belt retractor webbing does not extract from the stowed position or exhibits excessive pressure on the occupant during use. This may be due to a normal condition which happens when the seatbelt retracts at a high rate of speed. The Workshop Manual, Section 501-20A General Procedures has been updated with a locked seatbelt retractor releasing procedure.
- 10109070The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.
- 101090122013-2017 Edge/MKX/Flex/MKT/MKZ/MKS/Taurus/Taurus Police/Explorer/Explorer Police/Continental vehicles equipped with a 3.5L or 3.7L engine, all wheel drive (AWD) and a power transfer unit (PTU) that is being repaired or replaced for an internal failure must also have the vent hose replaced due to contamination in the hose.
- 10095995Some 2010-2016 epas equipped vehicles may exhibit steering related noises. The workshop manual (wsm) diagnostic procedures have been updated in section 211-02. When diagnosing and repairing epas steering noises use the updated procedures.
- 10095858Some 2007-2016 edge/mkx/flex/mkt/mkz/mks/taurus/taurus police/explorer/explorer police equipped with all wheel drive (AWD) and built on or before 30-jun-2016 may exhibit a ticking and/or knocking noise coming from the driveline area. To identify this noise, refer to workshop manual (wsm), section 100-04, and follow the symptom chart. If the source of the noise IS identified as the ptu and/or internal to the ptu, disassemble ptu assembly. Refer to updated wsm, section 308-07. If the ptu IS determined to be repairable, utilize kit gb5z-7p258-a and the included instruction sheet. For claiming, use causal part 7p258 and applicable labor operations in section 07 of the service labor time standards (slts) manual.
- 10095184Replacing the original equipment sync/navigation system with either an aftermarket sync/navigation kit or modifying original sync/navigation parts to provide additional features IS not recommended nor supported on any ford, mercury or lincoln vehicle. Only approved genuine ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: monroney label (window sticker), professional technician society (pts) oasis tab select sync or hvbom. For genuine ford accessories use: pts workshop tab select dealer installed accessory or accessory installation.
- 10095154To help differentiate engine oil leaks from other possible sources, a new white-colored fluorescent engine oil dye IS available. Workshop manual (wsm), section 303-00 has been revised to reference the new white-colored dye. The new white fluorescent dye provides a distinct white glow to identify engine oil leaks. The new white fluorescent dye requires a pure uv diagnostic inspection lamp. The white-colored fluorescent dye and pure uv lamp are now in the rotunda catalog. Dye and lamp part numbers. Gasoline only dye: 1 ounce bottle 164-tp-33200601. Diesel only dye: 8 ounce bottle: 164-tp-3320-0008. Pure uv diagnostic inspection lamp 164-tp8695 or 164-r3748.
- 10091151Some 2008-2017 ford/mercury/lincoln vehicles equipped with sync may generate a vhr that identifies a concern with the brakes and suspension category indicating service IS required due to a brake system warning lamp being illuminated. If the park brake was applied when the vhr was gathering data from the major vehicle systems, the brakes and suspension message will be reported as the vhr looks for any warning lamps illuminated in the instrument cluster. Rerun the vhr with the engine on and vehicle in park, and ensure the park brake IS disengaged. If the sync vhr IS still reporting a concern to the customers sync owners account, refer to the appropriate workshop manual section for diagnosis by dtc or symptom. Starting in 2015 not all sync equipped vehicles support vhr, refer to the owners manual for vhr operation.
- 10090681Some 2008-2017 ford/mercury/lincoln vehicles equipped with sync may generate a vhr that identifies a concern with the brakes and suspension category indicating service IS required due to a brake system warning lamp being illuminated. If the park brake was applied when the vhr was gathering data from the major vehicle systems, the brakes and suspension message will be reported as the vhr looks for any warning lamps illuminated in the instrument cluster. Rerun the vhr with the engine on and vehicle in park, and ensure the park brake IS disengaged. If the sync vhr IS still reporting a concern to the customers sync owners account, refer to the appropriate workshop manual section for diagnosis by dtc or symptom. Starting in 2015 not all sync equipped vehicles support vhr, refer to the owners manual for vhr operation.
- 10090671Some 2013-2016 fusion/escape/mkt/flex/mks/taurus, 2015-2016 mkz/mkc/edge and 2016 MKX vehicles may exhibit various radio concerns including: speaker static with key-off, no audio after vehicle IS first started with diagnostic trouble code (dtc) u0184, no volume control, or a stuck cd with no slot blockage. Prior to starting normal diagnosis for any of these conditions, verify the acm IS at the latest calibration using ids version 102.03 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. Use the applicable labor operation in section 11 of the slts manual and causal part 18c869 when claiming this repair.
- 10078990Siri eyes free functional issues using bluetooth and apple ios 9.2 and 9.2.1
- 10078988Air conditioning (a/c) inoperative - diagnostic trouble code (dtc) p0645
- 10058616Ford: transmission fluid leak from converter housing area on police utility equipped with 6f50/6f55 transmission
- 10058604Ford/lincoln: global positioning satellite module (gpsm) needs reprogramming to latest calibration due to voice prompt failing to locating vehicle, screen message indicator fault of navigation, instead of current location indicates previous location. Model 2014 ford, lincoln.
Every Ford Flex model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.