2018 Ford Flex
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2018 Ford Flex. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2018 Ford Flex. Newest first.
Ford Motor Company (Ford) is recalling certain 2017-2019 Flex vehicles. The driver and front passenger B-Pillar door trim may detach while driving.
Risk and remedy
Risk
Door trim that detaches while driving can create a road hazard, increasing the risk of a crash.
Remedy
Dealers will repair or replace the B-pillar trim as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed December 17, 2025. Additional letters will be sent once the remedy is available, anticipated March 2027. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SB8. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 28, 2025.
Ford Motor Company (Ford) is recalling certain 2015-2019 Flex, 2015 Explorer, Lincoln MKT, Lincoln MKZ, 2015-2016 C-Max, Escape, Taurus, 2016 Fusion, 2018-2019 Taurus, 2019 Lincoln MKT, Fiesta, and 2020 Mustang vehicles. The rearview camera may display a distorted, intermittent, or blank image when the vehicle is in reverse.
Risk and remedy
Risk
A rearview camera that fails to properly display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the rearview camera as necessary, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on October 25, 2025. Additional letters will be mailed once the final remedy is available on each phase. Mustang owner notification letters were mailed January 2, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA9. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 14, 2025.
Ford Motor Company (Ford) is recalling certain 2013-2018 Lincoln MKT and Ford Flex and Taurus vehicles with the Police Interceptor or SHO Performance Pack. The rear suspension toe links may fracture due to stress on the rear suspension.
Risk and remedy
Risk
A fractured rear toe link will cause a sudden change in vehicle handling and increase the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the rear suspension toe links, free of charge. Remedy parts are not currently available. Owners were notified about the recall on March 3, 2020. A second notice will be mailed when remedy parts become available, which is currently expected to be the end of September 2020. The recall began October 28, 2020. Owners may contact Ford customer service at 1-866-436-7332 or Lincoln customer service at 1-800-521-4140. Ford's number for this recall is 20S04.
Owner complaints
69 complaints7 involved a crash1 injuries
What owners report most
Latest complaints
- Structure
The contact owns a 2018 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V829000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted and had replaced the part on three separate occasions. The contact stated that the…
The contact owns a 2018 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V829000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted and had replaced the part on three separate occasions. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 70,000.
- Unknown or other
The radio/navigation system is having issues. Randomly the radio/nagvation system has a loud static crackling noise during use. It will make those sounds and then stops producing any kind of sounds of the speakers. No sound will come from the radio(fm, am, Bluetooth, aux, hands free calling or…
The radio/navigation system is having issues. Randomly the radio/nagvation system has a loud static crackling noise during use. It will make those sounds and then stops producing any kind of sounds of the speakers. No sound will come from the radio(fm, am, Bluetooth, aux, hands free calling or navigation). At the times even the sounds from pushing button will not work either. This is issue will carry on for days sometimes weeks. And randomly will start working again. When the issue do the radio not producing sound, navigation sounds or hands free talking sounds it won’t let you switch from radio to any other music feature. It acts like you didn’t push anything. It will only for a period of time and then it’ll start again. This presents you from using hands free talking, and navigation.
- Unknown or other
The driver side C pillar trim broke off while driving on the highway causing the debris to interrupt traffic.
- Electrical system · Unknown or other
I own a 2018 Ford Flex, VIN 2FMGK5D8XJBA07166, with two open safety recalls Ford cannot repair: 25SA9 (rear view camera, NHTSA 25V695) and 25SB8 (B-pillar trim, NHTSA 25V829). My rear view camera has been completely inoperative for two years — it has not worked at all since mid-2024. On 7/12/2024 a…
I own a 2018 Ford Flex, VIN 2FMGK5D8XJBA07166, with two open safety recalls Ford cannot repair: 25SA9 (rear view camera, NHTSA 25V695) and 25SB8 (B-pillar trim, NHTSA 25V829). My rear view camera has been completely inoperative for two years — it has not worked at all since mid-2024. On 7/12/2024 a Ford dealer verified the failure (repair order 568991), over a year before Ford issued recall 25SA9 in 10/2025. On 9/10/2026 Ford left me a voicemail stating there are no updates for 25SA9 and the 25SB8 remedy is not expected until Q1 2027 — over 15 months away. I have driven 2+ years with no functioning backup camera on a vehicle Ford knows is recalled. I request NHTSA treat this as a failure to provide a timely remedy and require Ford to provide an interim remedy or alternate vehicle and accelerate the repair timeline.
- Unknown or other
There's been a recall for the rear backup camera since October of last year. Although there hasn't been any particular incidents, there's been some close calls because the fix is still not available. Any help would be appreciated
- Back over prevention
The contact owns a 2018 Ford Flex. The contact received notification of NHTSA Campaign Number: 26V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rear-view camera displayed a black image. The vehicle was…
The contact owns a 2018 Ford Flex. The contact received notification of NHTSA Campaign Number: 26V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rear-view camera displayed a black image. The vehicle was taken to two dealers, but the vehicle was not repaired due to parts not being available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 103,000.
- Unknown or other
Rear passenger door fails to latch properly. The door falls open on left turn.Warnings are unclear or non-existant
- Back over prevention · Structure
The contact owns a 2018 Ford Flex. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image would appear blank and other times the camera not available warning message would display. The contact received…
The contact owns a 2018 Ford Flex. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image would appear blank and other times the camera not available warning message would display. The contact received notification of NHTSA Campaign Numbers: 25V829000 (Structure) and 25V695000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The approximate failure mileage was 150,000
- Electrical system · Lane departure › Blind spot detection · Unknown or other
Recall has not been remedied, and it has been over six months.I was told it would be remedied by june or ford would be held accountable for compensating for repairs on the.Recall. #25SA9/25v695 The recall addresses the camera for backing up witch is still not functioning in a safety risk.
- Service brakes · Suspension
Wile driving 40 mph, the right rear tire locked up and I had to counter steer aggressively to avoid spinning out and hitting oncoming traffic. The car was flat bed delivered to Ford and they recommended the following repairs. "Control Arm- Rear: rear suspension lateral links. The rear upper and…
Wile driving 40 mph, the right rear tire locked up and I had to counter steer aggressively to avoid spinning out and hitting oncoming traffic. The car was flat bed delivered to Ford and they recommended the following repairs. "Control Arm- Rear: rear suspension lateral links. The rear upper and lower control arms not only provide suspension travel but also secure the rear end to the vehicle." "*Tires - 4: passenger rear inner sidewall damaged."
- Engine
An antifreeze leak is very hard to locate because Ford’s design placed the water pump INside the engine rather than on the OUTside, which would be more the norm. If antifreeze leaks enough, it gets into the oil and the entire engine stands to be destroyed. Our heater quit blowing warm air recently…
An antifreeze leak is very hard to locate because Ford’s design placed the water pump INside the engine rather than on the OUTside, which would be more the norm. If antifreeze leaks enough, it gets into the oil and the entire engine stands to be destroyed. Our heater quit blowing warm air recently and after intently searching we discovered that we had an antifreeze leak inside of our engine, and antifreeze was slowly leaking out through a weephole in the engine. The water pump had gone bad and needed replacing. The hours required to replace this water pump are intense and they are long. Almost the entire engine needs to be dismantled in order to perform the work. Not only does the pump need changed, but so does the timing chain, hoses, seals, gaskets, tensioners and other engine parts, all at the same time, making this a VERY costly out-of-pocket expense for us elderly people who have long relied on Ford’s standard of doing what’s right by its people. In our research we found that the water pumps in Flex engines are failing, regularly, once the vehicle is close to having 80,000 miles on it. This repair most DEFINITELY should be covered by recall since it is happening so regularly. We have just been forced to pay for this repair on our own and I would like to please ask for your help in recovering what we’ve had to spend. Will you please provide contact information as to where we can reach out for assistance in this matter? Your help is VERY much appreciated! Thank you!
- Structure
The contact owns a 2018 Ford Flex. The contact received a notification of NHTSA Campaign: 25V732000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the front driver-side B-pillar trim with the Security Key…
The contact owns a 2018 Ford Flex. The contact received a notification of NHTSA Campaign: 25V732000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the front driver-side B-pillar trim with the Security Key pad had detached and almost struck nearby vehicles. The contact stated that she managed to pull over on the shoulder of the road; however, the vehicle independently locked, leaving the occupants on the shoulder of the road temporarily. In addition, the contact stated that while driving at an undisclosed speed on another occasion, the front Passenger-side B-Pillar trims had detached. The vehicle was taken to a local independent mechanic, where it was repaired out of pocket; however, the front Driver-side B-Pillar trim had detached, and upon further inspection, water would intrude through the missing, failed parts. The local dealer was contacted. It was unknown whether the vehicle was diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The manufacturer was made aware of the failure. The failure mileage was approximately 60,000.
- Lane departure › Blind spot detection
The warning shows that the blind spot sensor is not working.
- Back over prevention
The contact owns a 2018 FORD Flex. The contact stated while using the back up camera on the vehicle it ends to shutoff randomly causing a back over prevention issue. The contact received notification of NHTSA Campaign Number: (25V695000 (BACK OVER PREVENTION) however, the part to do the recall…
The contact owns a 2018 FORD Flex. The contact stated while using the back up camera on the vehicle it ends to shutoff randomly causing a back over prevention issue. The contact received notification of NHTSA Campaign Number: (25V695000 (BACK OVER PREVENTION) however, the part to do the recall repair was not yet available. The local dealer was/was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was 60,000.
- Back over prevention · Structure
The contact owns a 2018 Ford Flex. The contact stated while reversing, the rear view camera displayed a solid green screen. The contact stated that because of the failure, the contact almost crashed into another vehicle. The contact stated that the failure occurred intermittently. In addition, the…
The contact owns a 2018 Ford Flex. The contact stated while reversing, the rear view camera displayed a solid green screen. The contact stated that because of the failure, the contact almost crashed into another vehicle. The contact stated that the failure occurred intermittently. In addition, the B- Pillar on the driver's side rear door was detached. The vehicle was taken to the dealer, however the vehicle was not inspected. The contact was informed that the parts were unavailable. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The contact received recall notifications: NHTSA Campaign Number: 25V695000 (Back Over Prevention) and NHTSA Campaign Number: 25V732000 (Structurer) however the parts were unavailable. The manufacturer was not made aware of the failure. The failure mileage was approximately 75,000.
- Back over prevention · Structure
The contact owns a 2018 Ford Flex. The contact stated that while attempting to reverse the vehicle, the rearview camera became inoperable and the camera image appeared blurry. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention) and 25V732000 (Structure)…
The contact owns a 2018 Ford Flex. The contact stated that while attempting to reverse the vehicle, the rearview camera became inoperable and the camera image appeared blurry. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention) and 25V732000 (Structure); however, the parts required to complete the recall repairs were not yet available. The dealer was contacted and confirmed that the remedy parts were currently unavailable for the vehicle, although the contact was informed that remedy parts were available for the Mustang models. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time to provide a remedy for the recall repairs. The approximate failure mileage was 145,000.
- Structure
The contact owns a 2018 Ford Flex. The contact stated that the driver's side exterior B-Pillar trim had previously detached and was replaced by the dealer. The contact later received notification of NHTSA Campaign Number: 25V732000 (Structure). The dealer was contacted for reimbursement and…
The contact owns a 2018 Ford Flex. The contact stated that the driver's side exterior B-Pillar trim had previously detached and was replaced by the dealer. The contact later received notification of NHTSA Campaign Number: 25V732000 (Structure). The dealer was contacted for reimbursement and informed that reimbursement would be provided when the recall remedy became available. Additionally, the contact stated that while driving 25 MPH, the passenger’s side windshield exterior A-Pillar trim detached and flew off the vehicle. The contact was able to retrieve the trim from the road with the assistance of bystanders. The vehicle was taken to the dealer, where it was inspected, and the contact was informed that there would be a charge for the repair. The vehicle was not repaired. The contact was referred to the manufacturer for assistance. The manufacturer was not notified of the failure. The failure mileage was approximately 40,500.
- Electrical system · Structure › Body
Have been waiting for several months for Ford to remedy BOTH recalls. There obviously is no important reason for them to be productive and do the right thing so this issue will likely never be resolved unless I take action and file a complaint. The two issues are not even that critical so I…
Have been waiting for several months for Ford to remedy BOTH recalls. There obviously is no important reason for them to be productive and do the right thing so this issue will likely never be resolved unless I take action and file a complaint. The two issues are not even that critical so I further don't see why action has not been taken. 1. Interior A pillars separating. 2. Back up camera screen on infotainment center.
- Back over prevention
The contact owns a 2018 Ford Flex. The contact had recently undergone head and neck surgery, and the contact was unable to operate the vehicle with ease due to a disoriented image on the display. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however…
The contact owns a 2018 Ford Flex. The contact had recently undergone head and neck surgery, and the contact was unable to operate the vehicle with ease due to a disoriented image on the display. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 127,000.
- Structure › Body · Unknown or other
Recently, while driving on the freeway The drivers B pillar, came off and was only held on by the wires for the keyless entry. While driving on the freeway, I had to hold the B pillar until I could get off the freeway. When I called Ford, they told me to bring it in to get it looked at to proceed…
Recently, while driving on the freeway The drivers B pillar, came off and was only held on by the wires for the keyless entry. While driving on the freeway, I had to hold the B pillar until I could get off the freeway. When I called Ford, they told me to bring it in to get it looked at to proceed with the repair, but was then informed there is no parts at this time and had no time line when they would receive them. which is completely unacceptable since my B pillar is no longer attached. Also, my backup camera does not work. Sometimes it will work, but everything’s upside down and other times it just cuts out with lines across the screen.
- Back over prevention · Structure
The contact owns a 2018 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 25V695000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were not yet available. The vehicle was taken to the dealer, where the contact was informed that…
The contact owns a 2018 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 25V695000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were not yet available. The vehicle was taken to the dealer, where the contact was informed that the recall repairs were not completed because the parts for the recall repairs were not yet available. Additionally, the contact owned two other Ford Flex vehicles and a Ford Explorer with the same recalls associated with the VIN. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
- Structure
The contact owns a 2018 Ford Flex. The contact stated that while driving at undisclosed speeds on city roads, a trim piece fell off the vehicle, and the contact was unable to recover the trim piece. After losing the trim piece, the contact heard road noise and air entering the vehicle through the…
The contact owns a 2018 Ford Flex. The contact stated that while driving at undisclosed speeds on city roads, a trim piece fell off the vehicle, and the contact was unable to recover the trim piece. After losing the trim piece, the contact heard road noise and air entering the vehicle through the gap. The contact received notification of NHTSA Campaign Number: 25V732000 (STRUCTURE); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was 47,401.
- Structure
The contact owns a 2018 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V732000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the front passenger’s side B-pillar trim detached.…
The contact owns a 2018 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V732000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the front passenger’s side B-pillar trim detached. The local dealer was not contacted. The contact retrieved a temporary part at a local junk yard and attached the B-pillar trim with adhesive. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 100,000.
- Back over prevention · Structure
The contact owns a 2018 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 25V695000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of…
The contact owns a 2018 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 25V695000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The contact stated that while shifted to reverse(R), the back over prevention camera intermittently shut off. The dealer was not contacted. The manufacturer was not made aware of the issue. The failure mileage was approximately 68,000.
- Electrical system › Body control module/bcm
The contact owns a 2018 Ford Flex. The contact stated that while driving 35 MPH in the rain, the windshield wipers engaged but were moving significantly fast and significantly slow intermittently. The contact stated that the driver's assist system, including the blind spot detection system, the…
The contact owns a 2018 Ford Flex. The contact stated that while driving 35 MPH in the rain, the windshield wipers engaged but were moving significantly fast and significantly slow intermittently. The contact stated that the driver's assist system, including the blind spot detection system, the engine auto Start-Stop system, and the lane departure systems, was inoperable. Additionally, the contact stated that the remote start system was inoperable. The vehicle was taken to an independent mechanic, where it was diagnosed with BCM failure. The vehicle was not repaired. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 76,000.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- B-Pillar Trim Detachment
On August 7, 2025, the Office of Defects Investigation (ODI) opened PE25007 to investigate instances of B-pillar trim detachment in model year (MY) 2019 Ford Flex vehicles manufactured by Ford Motor Company. During the investigation, MY 2011-2018 Ford Flex vehicles were analyzed as peer vehicles, and subsequently…
On August 7, 2025, the Office of Defects Investigation (ODI) opened PE25007 to investigate instances of B-pillar trim detachment in model year (MY) 2019 Ford Flex vehicles manufactured by Ford Motor Company. During the investigation, MY 2011-2018 Ford Flex vehicles were analyzed as peer vehicles, and subsequently incorporated into the subject population because they use B-pillar trim pieces that are substantially similar to those used on the MY 2019 Ford Flex vehicles. In July 2025, prior to the opening of PE25007, ODI and Ford met to discuss B-pillar trim detachment in Ford Flex vehicles. Ford reported that its warranty analysis indicated that Flex B-pillar trim had a low detachment rate and that Ford did not believe this condition posed an unreasonable risk to motor vehicle safety. In July 2025, Ford closed its internal investigation. Because ODI’s analysis of complaint data indicated a high failure rate and an increasing failure trend, PE25007 was subsequently opened. In responding to the information request for PE25007, Ford reassessed the warranty search criteria used in its July 2025 internal investigation. The reassessment found the detachment rate to be substantially higher than what Ford had originally determined. Consequently, in October 2025, Ford issued recall 25V732based on the reassessed and accurate high failure rate. This recall instructed dealers to inspect the driver and front passenger B-pillar trim pieces and repair/replace if necessary. The vehicles included in this recall were MY 2017-2019 Ford Flex with production dates between February 17, 2017 and December 2, 2019. In January 2026, Ford issued 25V732 Amendment 1, which updated the remedy to remove the inspection criteria and instead proactively secure the driver and front passenger B-pillar trim with adhesive. The scope of vehicles included in the recall was unchanged by Amendment 1. ODI’s analysis of 25V732 found that both the scope and remedy were insufficient and that an unreasonable safety risk remained despite the recall. MY 2016 Ford Flex was excluded from the recall scope and the rear B-pillar trims on both the driver and passenger side were excluded from the recall. The failure rates of both MY 2016 Ford Flex and rear B-pillar trim pieces were found to be higher than the failure rates in similar trim detachment recalls issued by both Ford and other vehicle manufacturers. Starting in January 2026, ODI and Ford had multiple meetings to discuss Ford’s PE25007 response data and ODI’s concern about the 25V732 scope and remedy. In June 2026, Ford issued 25V732 Amendment 2. This amendment expanded the scope of the recall to add MY 2016-2017 Ford Flex vehicles produced before February 17, 2017. Additionally, this amendment updated the remedy to include removal of and reapplication or replacement of both rear driver and rear passenger B-pillar trim pieces in addition to front driver and front passenger B-pillar trim pieces. This updated remedy applies to all MY 2016-2019 vehicles. Ford expects to complete the mailing of remedy owner notification letters by March 26, 2027. Also, Ford informed ODI that prior model year (MY 2011-2015) vehicles were referred to Ford’s Customer Satisfaction forum for consideration of an extended warranty program. In view of recall 25V732 and its associated amendments, ODI is closing this Preliminary Evaluation (PE). The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 11001174This article supersedes TSB 21-2175 to update the TSB Service Procedure. Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. related concerns including but not limited to: Display operation concerns Navigation inoperative Voice recognition concerns Phone connection issues Dropped phone connections Applink related performance Travel Link not present or showing incorrect traffic Slow system response This may be due to the SYNC software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software. NOTE: Ford has found some of the APIMs replaced and returned for inspection contained an outdated software level and the APIM did not require replacement. The customer concern may have been resolved by updating the APIM with latest level of software.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
- 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10217028Some 2017-2022 Ford/Lincoln customers may experience a notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. This occurs when the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SOC) drops below 50%. A warning may also set if the telematic control unit (TCU) has received an over the air update. The TCU powers down all communication when in this mode and app features are disabled. Manually start the vehicle to wake if from mode. More information is located in the app under: Account > Help > search 'Deep Sleep' in the entry box. If the condition remains, check the BCM 12v SOC. If the SOC does not change after charging the battery or after BMS reset is performed, continue with normal battery and/or BMS sensor diagnostics.
- 10208146Some 2017-2018 Focus/MKX/C-MAX, 2017-2019 MKC/Taurus/Flex/MKT, 2017-2020 Fusion/MKZ/Continental, 2017-2022 Mustang/Edge/Explorer/Police Interceptor Utility/Escape/F-150/F-Super Duty, 2018-2022 Expedition/Navigator, 2019-2022 Ranger/Nautilus, 2020-2022 Corsair/Aviator, and 2021-2022 Mustang Mach-E vehicles may exhibit a noisy, incorrectly operating, and/or inoperative seat motor. This may be due to a damaged or inoperative seat track motor. A lower level service part has been released to correct noisy, incorrect operation/inoperative seat track motors.
- 10205694Some 2016-2021 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit a condition where the navigation voice prompts are inoperative after a SYNC map update. This may be due to an incomplete installation of the SYNC map software. If possible, using the original USB that installed the update, reperform the update and verify the navigation voice prompts have returned. Multiple reboots are expected when this update is being performed. Verify the Installation Is Complete message displays in the touch screen. If the original USB is not available, go to website https://syncnavigation.com/ford/home or https://syncnavigation.com/lincoln/home to download the files once more for the affected vehicle. For further map update support, reference the FAQ section on these websites.
- 10201050Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK12 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10201013Some 2016-2021 Ford or Lincoln vehicles equipped with SYNC 3 or SYNC 4 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is considered normal due to the power saving features enabled while in transport mode. It is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure exactly allowing time for the SYNC system to complete its tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
- 10198605Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns.
- 10194428Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10187930Some 2018-2020 Ford and Lincoln vehicles equipped with TCU and WiFi Hotspot, May display Vehicle Hotspot feature not enabled on this vehicle when attempting to enter the Hotspot menu. When using the FordPass/Lincoln Way application, the customer may receive a message saying Wi-Fi has been disabled from this vehicle. Check the vehicle specifications or vehicle build information for the mfal code on the PTS website (Detailed Vehicle Specifications). If mfal = WAFAC or WAFAB do not replace the TCU, engineering is currently investigating this condition. Inform customers Ford is developing a software fix that is expected in early March. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early March. Monitor OASIS for updates.
- 10184779Some 2016-2019 Flex vehicles equipped with a factory keyless entry keypad may exhibit a loose driver side B-pillar front door upper moulding. This may be caused by a lack of adhesion of the front door upper moulding to the door. To correct the condition, follow the Service Procedure steps to reapply adhesive tape to the front door trim panel.
- 10181913Some 2018-2020 Ford and Lincoln vehicles equipped with TCU and WiFi Hotspot, May display Vehicle Hotspot feature not enabled on this vehicle when attempting to enter the Hotspot menu. When using the FordPass/Lincoln Way application, the customer may receive a message saying Wi-Fi has been disabled from this vehicle. Check the vehicle specifications or vehicle build information for the mfal code. If mfal = WAFAC or WAFAB do not replace the TCU, engineering is currently investigating this condition. Inform customers Ford is developing a software fix that is expected in early January. In the interim, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment with the customer for early January. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
- 10180428Some 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual (WSM), Section 303-00 General Information > Diagnosis and Testing > Engine > Engine Oil Leaks - Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards (SLTS) Manual.
- 10179117Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F150/Focus/CMAX/Edge/Fiesta/MKX/ Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.
- 10177042Some 2016-2020 Ford and Lincoln vehicles equipped with a SYNC 3 Touchscreen may experience the volume control unresponsive from the Front Control Interface Module (FCIM) and steering volume controls when using Apple Car Play. When the Apple device is removed, volume control is restored. This is due to a concern with the Waze Navigation App software and Apple iOS version. To correct the condition, update the Waze App software and iOS to the latest version available and reboot the customer's Apple device. Perform an ignition cycle and reconnect the Apple device via USB. Open Apple Car Play and confirm volume control is restored. Installing/Updating third party software/applications is not warrantable.
- 10174421Some customers may experience a notification in the FordPass and/or LincolnWay apps that indicates their vehicle has entered "deep sleep mode". This mode is enabled due to the vehicle not being started for 14 consecutive days or battery voltage is at/or below 9.5 volts. Some 2020 models will also set a warning if the telematic control unit (TCU) has received an automatic over the air update. The purpose of deep sleep mode is to conserve battery voltage. When deep sleep mode is enabled, the TCU is powered down and all communication with the FordPass and/or LincolnWay apps are disabled. To wake the vehicle from deep sleep mode, manually start the vehicle. More deep sleep mode information can be found in the FordPass or LincolnWay apps under: More > Guides > click in search entry box > type "deep sleep" and click on "Ask".
- 10172972SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
- 10169986Some 2015-2020 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10168810Some 2016-2019 vehicles equipped with SYNC 3 may experience a map displayed on the left half of the SYNC screen with no other information/soft buttons present after updating to the latest version of V3.0 software. This issue occurs when the SYNC 3 system has been previously modified using an aftermarket device to display the Ford GT welcome screen/HMI Theme. To correct this issue, please contact the Technical Hotline Assistance Center to have the vehicle restored back to its original state.
- 10164596Some 2013-2020 vehicles equipped with an EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function. To support the proper diagnosis of this compressor, the EVDC control valve tester has been provided to each U.S. dealership (339-EVDC100). Ensure the A/C system has a full charge prior to any compressor diagnostics. To support the proper diagnosis of this compressor, the EVDC compressor tool must be used, and the results recorded in the Technician comments field with the warranty claim. This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
- 10164497For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
- 10163573Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Use pigtail harness service part numbers 3U2Z-14S411-ZEA or CU2Z-14S411-FA, as both parts are interchangeable. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures.
- 10163568Some 2018-2019 Explorer/Flex/Taurus/MKT vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL), powertrain malfunction (wrench) lamp, Service AdvanceTrac message, Hill Start Assist Not Available message, and/or lack of power with diagnostic trouble codes (DTCs) P0107, P0108 and/or P0109 present. This may be due to a faulty manifold absolute pressure and temperature (MAPT) sensor. To correct the condition, follow the Service Procedure to replace the MAPT sensor.
- 10163554Some 2018-2019 Explorer/Flex/Taurus/MKT vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL), powertrain malfunction (wrench) lamp, Service AdvanceTrac message, Hill Start Assist Not Available message, and/or lack of power with diagnostic trouble codes (DTCs) P0107, P0108 and/or P0109 present. This may be due to a faulty manifold absolute pressure and temperature (MAPT) sensor. To correct the condition, follow the Service Procedure to replace the MAPT sensor.
- 10162087Some 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM,Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual. Section
- 10162086Some 2015-2017 F-150/Mustang, 2015-2018 Edge/MKC, 2016-2018 MKX, 2013-2018 Explorer/Taurus/Flex/MKT, and 2017-2018 Fusion/MKZ/Continental vehicles built on or before 19-Oct-2017 may exhibit an inoperative adaptive cruise control, collision warning, and/or collision avoidance system with a Pre-Collision Assist Not Available, Collision Warning Not Available, and/or Adaptive Cruise Fault message present in the instrument panel cluster (IPC) and diagnostic trouble code (DTC) U3000:49 present in the cruise control module (CCM). To resolve the condition, reprogram the CCM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 9E731 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10162063Some 2018-2019 Explorer/Flex/Taurus/MKT vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL), powertrain malfunction (wrench) lamp, Service AdvanceTrac message, Hill Start Assist Not Available message, and/or lack of power with diagnostic trouble codes (DTCs) P0107, P0108 and/or P0109 present. This may be due to a faulty manifold absolute pressure and temperature (MAPT) sensor. To correct the condition, follow the Service Procedure steps to diagnose and replace the MAPT sensor.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10160880Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10159494SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10159489Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10156877Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
- 10155565Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
- 10153969Some 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.
- 10153948Some 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 and a 6, 8 or 10 inch screen may show a pop-up message every key cycle that states 'SYNC can check for updates when connected to a WiFi network'. To remove the inconvenience of the pop-up the customer can either connect to a trusted WiFi network to complete the setup process or turn off WiFi in the WiFi settings located under the Settings menu. Adjusting the setting for the customer is not a warrantable defect.
Every Ford Flex model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.