2006 Hyundai Tucson
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hyundai › Tucson › 2006
These records cover every 2006 Hyundai Tucson. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2006 Hyundai Tucson. Newest first.
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled…
Risk and remedy
Risk
Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. Additionally, when the ignition is in the 'ON' position, the transmission shifter may be able to be moved out of Park without first applying the brake. This may lead to unintentional movement of the car which may increase the risk of a crash.
Remedy
Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.
Hyundai IS recalling 3,011 model year 2005-2007 elantra, tucson, sonata, azera and accent vehicles. a malfunctioning stop lamp switch may cause the brake lights to fail to illuminate when the brake pedal IS depressed or may cause the brake lights to remain illuminated when the brake pedal IS released. a defective stop lamp switch may also affect the…
Risk and remedy
Risk
Any of these malfunctions could lead to a crash.
Remedy
Dealers will replace the stop lamp switch free of charge. the recall began on september 2, 2009. owners may contact hyundai of puerto rico customer service at 1-787-999-4310.
Hyundai IS recalling 532,633 my 2006-2007 accent, entourage, sonata, my 2007 azera, elantra and santa fe, my 2005-2007 tucson and my 2007-2008 veracruz vehicles. the stop lamp switch in the affected vehicles may malfunction. a malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal IS depressed or may cause the…
Risk and remedy
Risk
Any of these malfunctions, alone or in combination, may lead to a crash.
Remedy
Dealers will replace the stop lamp switch free of charge. the recall began on june 29, 2009. owners may contact the hyundai customer assistance center at 1-800-633-5151.
On certain vehicles, static air bag deployment testing conducted by nhtsa using fifth percentile female dummies indicated that a small stature adult driver not wearing a seat belt and involved in a frontal or near frontal crash, the deployment of the driver air bag may not occur.
Risk and remedy
Risk
This can cause increased risk of injury to the driver under certain crash conditions.
Remedy
Dealers will replace the driver air bag module with one that IS designed to provide an increased margin of compliance for low risk deployment for small stature adults who are not properly wearing the seat belts. the recall began on september 6, 2007, and will be performed in two mailings. owners may contact hyundai de puerto rico at 1-800-981-0188.
On certain sport utility vehicles, during static air bag deployment testing conducted by nhtsa using fifth percentile female dummies indicated if a small statured adult driver, not wearing a seat belt, IS involved in a frontal or near frontal crash, deployment of the driver air bag may result in an insufficient margin of compliance as measured by the test…
Risk and remedy
Risk
This can cause increased risk of injury to the driver under certain crash conditions.
Remedy
Dealers will replace the driver air bag module. the recall began on january 29, 2007, and will be conducted through six mailings. owners may contact hyundai at 1-800-633-5151.
Owner complaints
135 complaints15 involved a crash3 involved a fire17 injuries
What owners report most
Latest complaints
- Unknown or other
Rear subframe corrosion
- Structure
The contact owns a 2006 Hyundai Tucson. The contact stated while the vehicle was parked, the contact noticed that the rear subframe had become inoperable and the contact noticed that the rear subframe was corroded. The vehicle was towed to an independent mechanic but was not diagnosed or repaired.…
The contact owns a 2006 Hyundai Tucson. The contact stated while the vehicle was parked, the contact noticed that the rear subframe had become inoperable and the contact noticed that the rear subframe was corroded. The vehicle was towed to an independent mechanic but was not diagnosed or repaired. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 180,000.
- Service brakes · Unknown or other
ESC OFF light does not turn off. I press it off and on while driving and nothing happens. It stays on all the time.
- Engine · Tires › Pressure monitoring and regulating systems
The contact owns a 2006 Hyundai Tucson. The contact stated that while attempting to start the vehicle, the vehicle hesitated. The vehicle was taken to an independent mechanic, where it was diagnosed; however, the cause of the failure was not yet determined. The contact stated while driving at an…
The contact owns a 2006 Hyundai Tucson. The contact stated that while attempting to start the vehicle, the vehicle hesitated. The vehicle was taken to an independent mechanic, where it was diagnosed; however, the cause of the failure was not yet determined. The contact stated while driving at an undisclosed speed, the vehicle stalled. The check engine warning light and the TPMS warning light were illuminated. Additionally, the engine overheated. The contact related the failure to an unknown recall and Technical Service Bulletin: 952. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 140,000.
- Service brakes · Structure › Body · Suspension
At first brakes were making noise so I went to replace them after getting parts and I noticed that the brake pedal went to the floor I was able to get it on concrete pad but when I jacked it up I say big chunks of rust falling when I looked under car rear axle subframe was pretty much gone after I…
At first brakes were making noise so I went to replace them after getting parts and I noticed that the brake pedal went to the floor I was able to get it on concrete pad but when I jacked it up I say big chunks of rust falling when I looked under car rear axle subframe was pretty much gone after I say that I decided to order the replacement subframe but when it come in and I was getting ready to do it I body mount where it is bolted also needs replaced I was trying to find them when I come across a factory recall about this issue when I contacted them and the dealer about this issue dealer said it couldn't be done because there was nothing left and he refused to put on a lift because he said the rear subframe would fall on ground but manufacturer denied to repair or make any resolutions for it even though they had in past and they new about the problem I have found over 1000 issues listed and they have repaired a bunch of the same vehicles for the same issue I told them I never received anything about the issue and they said it was my responsibility not there's so not only did they not do or even try to do what they have on recall but they refused to do anything for me and I was glad I didn't try driving after I heard noise because I could of caused a major accident and been severely injured in process not to mention someone else due to rear frame and brakes falling and falling out of car
- Suspension
Rear cross member frame broke in 2 spots due to rust. I’ve searched this and found numerous vehicles with same problem contacted dealer and they said they can’t do anything about it. What steps should I take. I called there corporate office left They don’t don’t return calls callsor or texts complaints.
- Unknown or other
Driver side rear unibody sub frame rusted through
- Steering · Suspension · Unknown or other
Rear control arm mount broke away from subframe while on the highway going 65mph. Violent shaking and steering malfunction occurred immediately. Passed WV inspection just a few months ago.
- Firerelated
The contact owned a 2006 Hyundai Tucson. The contact stated that after parking his vehicle in the driveway, he looked through the window of his residence and noticed that the vehicle had caught fire from underneath the hood. The contact related the fire to an electrical system failure. The fire…
The contact owned a 2006 Hyundai Tucson. The contact stated that after parking his vehicle in the driveway, he looked through the window of his residence and noticed that the vehicle had caught fire from underneath the hood. The contact related the fire to an electrical system failure. The fire department was able to extinguish the fire. Police and fire department reports were filed. The vehicle was towed to a tow yard and deemed totaled by the insurance company. The manufacturer was not made aware of the failure. The failure mileage was approximately 198,000.
- Engine
When I drive my car and right after I put gas in my car I smell gas to the point that my husband and I are coming home with headaches and we're sick to her stomach I've taken it to a mechanic and they say there's nothing wrong the engine check engine light keep on coming on and then it will go off…
When I drive my car and right after I put gas in my car I smell gas to the point that my husband and I are coming home with headaches and we're sick to her stomach I've taken it to a mechanic and they say there's nothing wrong the engine check engine light keep on coming on and then it will go off after it sit for a couple minutes turned off I'm about ready to have a baby in June and I'm so worried to have the baby in the car the brakes have stopped working to the point that I've gone in through lights and I can hardly put the brakes on I have to use emergency brake sometimes and nobody will help me get it taken care of I have had almost couple wrecks because I cannot get the brakes to stop take a lock on me and it's scary when you're having a baby and you know your seatbelt your brakes are locking but you for your seat belt to keep safe and my brakes locked to the point I cannot get them after the kick hit them with all my might just to unlock them and nobody will help me fix it
- Electrical system · Steering
When it rains my steering wheel locks up when I drive thru a puddle I have brought my car to used car dealer where I bought it from and they say nothing is wrong but steering wheel locks when driving that to me is major problem they checked belt water is getting somewhere and causing a short hence power steering to lock it only happens when it rains
- Air bags
The contact owns a 2006 Hyundai Tucson. The contact stated while driving at various speeds, he noticed that the air bag warning light was illuminated. The vehicle was taken to an independent mechanic and diagnosed with the air bag module needing to be replaced. The independent mechanic cleaned the…
The contact owns a 2006 Hyundai Tucson. The contact stated while driving at various speeds, he noticed that the air bag warning light was illuminated. The vehicle was taken to an independent mechanic and diagnosed with the air bag module needing to be replaced. The independent mechanic cleaned the contacts for the seat sensors however, the failure recurred. The manufacturer was not informed of the failure. The contact related the failure to an unknown recall. The failure mileage was approximately 100,000.
- Engine
TL* the contact owns a 2006 hyundai tucson. the contact stated that while driving 5 mph and attempting to stop the vehicle, the brake pedal was depressed and the vehicle stalled. After the failure, the check engine warning light illuminated. The vehicle was taken to shaker's family hyundai (674…
TL* the contact owns a 2006 hyundai tucson. the contact stated that while driving 5 mph and attempting to stop the vehicle, the brake pedal was depressed and the vehicle stalled. After the failure, the check engine warning light illuminated. The vehicle was taken to shaker's family hyundai (674 straits tpke, watertown, ct 06795, (860) 631-4200) to be diagnosed. The contact was informed by the dealer that the adaptive values were reset and the vehicle should perform as designed. The contact retrieved the vehicle and while driving into her driveway, the oil warning light illuminated. The contact stated that the vehicle was previously taken to an independent mechanic who replaced the throttle body and mas air flow sensors however, the failure persisted. The vehicle was not yet repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 190,000.
- Electrical system · Service brakes · Suspension
Hyundai never notified us of the subframe rust recall. Our mechanic just pointed out that our's. He said the car IS unsafe to drive. Getting it replaced at our expense. Brake lines have already failed and had to be replaced at our expense. Alternator and power steering pump, front suspension all at our expense. Hyundai unresponsive.
- Steering
Day 1:I pulled into a lane leading to a parking lot. On a 90 degree turn, I lost power steering and the engine light came on. The hyundai still was idling when I lost the power steering. I came to a stop and the power steering started working again. There was some water on the pavement. day 2…
Day 1:I pulled into a lane leading to a parking lot. On a 90 degree turn, I lost power steering and the engine light came on. The hyundai still was idling when I lost the power steering. I came to a stop and the power steering started working again. There was some water on the pavement. day 2: same as day one in same location on the same turn. day 5: took vehicle to service center and explained the problem. they came back and said they checked the computer for error codes and none were found. the checked the under carriage for loose wires, none were found. they checked the serpentine belt and it was also found in good condition. problem could not be found. no insurance safe driving sensor was plugged into the com port. there IS a sensor on the windshield that IS stuck on. no physical connection to the vehicle.
- Fuel/propulsion system · Structure › Body
TL* the contact owns a 2006 hyundai tucson. The contact stated that they heard a loud thumping coming from underneath the vehicle. They inspected the vehicle and noticed a metal container with a plastic casing that was getting burned due to a fuel line leading to it. The contact stated their…
TL* the contact owns a 2006 hyundai tucson. The contact stated that they heard a loud thumping coming from underneath the vehicle. They inspected the vehicle and noticed a metal container with a plastic casing that was getting burned due to a fuel line leading to it. The contact stated their vehicle was included in a recall where the straps were placed to hold the gas tank was near a unit that had wires relating to the gas tank and towards the engine, indicating it was the computer used for the fuel line connection between the gas tank and the engine. The contact spoke with the dealer (libertyville lincoln 941 s milwaukee ave, libertyville, il 60048; (847) 367-1700) who stated that due to their vehicle not being included in a recall they were unable to diagnose the vehicle free of charge. The vehicle had not been repaired. The manufacturer was not made aware of the issue. The approximate failure mileage 165,000.
- Suspension
I just spent about $100. Fixing ball joint and control arm and was rotating wheels and looked under car and seen rear subframe all rusted out.the car has a great body and runs very good. I bought this car brand new and I drive my grandkids in this car and now looks un safe to drive.
- Air bags · Service brakes
Recall for my airbag was not done. Brake lights don't work, electrical problems.
- Unknown or other
I got in the vehicle and put it in reverse as I was eating reversed I put on the brake but the brake would not go on the car kept rolling backwards I didn't try to put the car into park do not go into park I tried to put it into drive it would not go into drive I had no break the break with all the…
I got in the vehicle and put it in reverse as I was eating reversed I put on the brake but the brake would not go on the car kept rolling backwards I didn't try to put the car into park do not go into park I tried to put it into drive it would not go into drive I had no break the break with all the way to the floor there's no break I check with breakfast if there IS fluid in the container but there IS still no brakes the car was like he was in when I put my foot on the gas it would not go it was like it had a whole bunch of weight on it and it was like not being able to even drive IS that the engine was locked up or somebody had a chain around around the wheels who's got a lot going this was on a highway and then I pulled over near school because I could not drive the car
- Electronic stability control (esc) · Unknown or other · Vehicle speed control
The vehicle while foot on brake or while in park accelerates on its own! I almost got into an accident because my foot was all the way on the brake for car to stop but engine was still inching forward while in stopped position! When it IS in park it tries to accelerate but ends up stalling out and…
The vehicle while foot on brake or while in park accelerates on its own! I almost got into an accident because my foot was all the way on the brake for car to stop but engine was still inching forward while in stopped position! When it IS in park it tries to accelerate but ends up stalling out and then im unable to start back up for about 10 minutes also when going a steady city wide speed my car chooses to accelerate without making it do so this IS scary I have 2 small children and this IS dangerous I have carried it to 2 different machanic shops one being firestone best of the best and have had diognostic tests conducted and they are unable to find the cause of my issue! It happens at various times I have read many of the same issues happening online with the tuscons and santa fe this issue needs to be investigated! I almost hit someone in the rear end with my foot completely on the brake! And it was as if I was fighting with my vehicle to stop
- Structure › Body
The rear subframe crossmember and parking brake are completely corroded. This was noticed while changing the brakes on nov. 1ST 2019
- Structure › Body · Suspension
We were driving the car when the rear end started swaying while making a left turn onto a busy main street. We had a mechanic shop look underneath and they found that the entire rear subframe had come apart due to corrosion.
- Air bags
My light inside of vehicle comes on and stay for a while, then goes off, then about a month later do the same.i went to a dealer, he said to fix it would be a certain amont, but I told him not to fix it cause I didn' have the money, so he charged me about $130.00 for checking it.
- Structure › Body · Suspension
Rear subframe has collapsed and disconnected from the unibody suddenly due to excessive corrosion. Car IS only 12 years old and only has 150,000 miles on it. Collapse IS sudden and makes the car difficult to steer and can result in erratic movements in handling.
- Engine
TL* the contact owns a 2006 hyundai tucson. While the vehicle was idling in the park position, it stalled. The vehicle was restarted, but it stalled again. The contact stated that the failure occurred sporadically for two and a half years. The vehicle was taken to an independent mechanic who…
TL* the contact owns a 2006 hyundai tucson. While the vehicle was idling in the park position, it stalled. The vehicle was restarted, but it stalled again. The contact stated that the failure occurred sporadically for two and a half years. The vehicle was taken to an independent mechanic who determined that the air idle control valve failed and needed replacement. The vehicle was repaired back in may of 2016, but the failure recurred. The manufacturer and dealer were not notified of the failure. The approximate failure mileage was 110,300.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Stop lamp switch failure
By letter dated april 15, 2009, hyundai notified the agency that it will conduct a safety recall (nhtsa recall number 09v122) to replace the stop lamp switches on many of its model year 2005-2008 vehicles.see recall 09v122 for a complete list. The agency opened its investigation based on five complaints of stop lamp…
By letter dated april 15, 2009, hyundai notified the agency that it will conduct a safety recall (nhtsa recall number 09v122) to replace the stop lamp switches on many of its model year 2005-2008 vehicles.see recall 09v122 for a complete list. The agency opened its investigation based on five complaints of stop lamp failure across several 2007 hyundai models. The agency also received early warning (ewr) reports on this issue.most of those failures were traced to the improper operation of the stop lamp switch that controls stop lamp illumination.a malfunctioning stop lamp switch can cause the vehicle's brake lights not to light during braking, or alternatively, it can cause the brake lights to stay lit even when a driver takes the foot off the brake pedal. Failure of the stop lamps to illuminate properly creates the hazard of rear end collisions when drivers following the subject vehicle do not recognize that the vehicle IS slowing or stopping. Hyundai reported one crash incident (a frontal impact), without injury, that was alleged to have been caused by this defect.the agency reviewed the incident and cannot conclude that it IS related to this defect. There are other potential problems related to failure of the stop lamp switch: failure of the cruise control to disengage, interference with proper functioning of antilock brakes and electronic stability control, and inability to move the gear shift lever out of park position.based on the above safety recall, this investigation IS closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
- 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
- 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
- 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 10196546Hyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicles owners manual. Use of other ATF may result in improper shift quality or other drivability conditions. Use of other DCT and IVT gear oil may result in reduced durability. Hyundai does not approve the use of any aftermarket ATF or gear oil additives.
- 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
- 10190038This bulletin provides best practice recommendations when performing brake service procedures.
- 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 10183963This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 10183960This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
- 10178175This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
- 10176182This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 10176178This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
- 10174808This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
- 10174807The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
- 10173546This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
- 10172142This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
- 10170883This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
- 10169370The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
- 10167253This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
- 10160098This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
- 10154545This bulletin provides information for inspecting and replacing front or rear wheel bearing hub assemblies for any model Hyundai vehicle. This procedure is applicable when there is noise such as a whirring/roaring/grinding/rumbling/etc. that gets louder when driving with more speed.
- 10138244This bulletin describes the procedure to replace the fuel tank bands on certain 2005-2007 MY Tucson (JM) vehicles. The fuel tank bands may become corroded over time and cause the fuel tank to become loose.
- 10110915In some areas, a vehicle's underbody may exhibit corrosion due to road salt usage. As a precautionary measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to the bottom exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain Tucson (JM) vehicles.
- 10082725This bulletin provides information on components, attributes, and precautions of the 7-speed dry-type dual clutch transmission (dct).
- 10082455"The pcm or tcm contains logic to adjust solenoid duty and line pressure as needed to compensate for normal clutch wear over the life of the transaxle. This bulletin provides the procedures necessary to reset (erase) and relearn the pcm/tcm adaptive values. After the following repairs have been completed, the pcm/tcm adaptive values must be reset in order to provide optimum shift quality. If the procedure IS not performed, the transmission may experience a shift flare or harsh shift. H replace automatic transaxle or pcm/tcm h reprogram or exchange a pcm/tcm from another vehicle"
- 10059677Summary to be provided on a future date.
- 10055865Cavity wax preventative procedure to apply to front and rear under body.
- 10032908Hyundai: ata solenoid diagnostic trouble codes p0740, p0741, p0742, p0743, p0746, p0748, p0750, p0755, p0760, p0765, p0770. Incorrect operation of the transaxle solenoids may result in the following symptoms-check engine light illuminated; transaxle held in 3RD gear fail safe.
- 10031008Hyundai service campaign: see document search button for owner letter. Stop lamp switch replacement (campaign 092). This bulletin describes the procedure to remove, replace, and adjust the stop lamp switch.
- 10030984Hyundai: automatic transaxle range switch diagnostic trouble codes p0705 (range switch signal problems), p0707 (range switch open circuit), and p0708 (range switch short circuit or multiple inputs). An improperly adjusted or improperly operating range switch may result in the above mentioned conditions. Malfunction indicator light (mil) illuminated; impossible engine start in p or n.
- 10025102Tucson p0171, p0174 (system too lean) air filter housings for 2.0L and 2.7L engines.
- 10021298Driver air bag cover module replacement.
- 10020907Esc (esp) hecu and yaw rate sensor interchangeability.
- 100207102.0L cylinder head and timing belt system - part update.
- 10019637ABS pump self-check noise.
- 10019123Esc (or esp) ecm (electronic control module) reprogramming procedure - campaign 922.
- 10018877TPMS sensor removal and installation service procedures.
Every Hyundai Tucson model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.