2010 Hyundai Tucson
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hyundai › Tucson › 2010
These records cover every 2010 Hyundai Tucson. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2010 Hyundai Tucson. Newest first.
Hyundai Motor America (Hyundai) is recalling certain 2011-2015 Elantra, Genesis Coupe, Sonata Hybrid, 2012-2015 Accent, Azera, Veloster, 2013-2015 Elantra Coupe, Santa Fe, 2014-2015 Equus, 2010-2012 Veracruz, 2010-2013 Tucson, 2015 Tucson Fuel Cell, and 2013 Santa Fe Sport vehicles. The Anti-Lock Brake System (ABS) module may leak brake fluid internally…
Risk and remedy
Risk
An engine compartment fire while parked or driving can increase the risk of injury.
Remedy
Owners are advised to park outside and away from structures until the recall repair is complete. Dealers will replace the ABS fuse, free of charge. Owner notification letters were mailed April 10, 2024 through October 11, 2024. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 251.
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled…
Risk and remedy
Risk
Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. Additionally, when the ignition is in the 'ON' position, the transmission shifter may be able to be moved out of Park without first applying the brake. This may lead to unintentional movement of the car which may increase the risk of a crash.
Remedy
Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.
Hyundai IS recalling certain model year 2010 tucson vehicles manufactured from february 27, 2010, through april 17, 2010 for failing to comply with federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment," for the photometry requirements of the rear reflector assemblies installed in the rear bumpers.
Risk and remedy
Risk
This could lead to reduced visibility of the rear of the vehicle, increasing the risk of a crash.
Remedy
Dealers will replace the rear reflector assemblies, free of charge. the safety recall IS expected to begin during june 2011. owners may contact hyundai's customer assistance center at 1-800-633-5151.
Hyundai IS recalling certain model year 2010 tucson vehicles. properly seated adult right front seat passengers weighing over approximately 240 pounds cause the passive occupant detection system (pods) module program to illuminate the "air bag" warning lamp.
Risk and remedy
Risk
If "air bag" warning lamp IS illuminated, the passenger air bag will deploy if a crash of sufficient force to require front air bag deployment IS experienced, and will not be deactivated if a child IS seated in the right front seating position, which may increase the risk of injury to a child front passenger.
Remedy
Dealers will reprogram the pods module free of charge. hyundai anticipates owners notification began by telephone on february 15 2010 and the notification was mailed on march 5, 2010. owners may contact hyundai customer assistance center at 1-800-633-5151.
Owner complaints
59 complaints3 involved a crash2 involved a fire3 injuries
What owners report most
Latest complaints
- Service brakes, hydraulic
The contact owns a 2010 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that while her significant other was driving at an undisclosed speed, there…
The contact owns a 2010 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that while her significant other was driving at an undisclosed speed, there was an abnormal burning odor coming from under the passenger’s side dashboard. Upon further inspection, there was a small fire starting. The vehicle was pulled over to the shoulder of the road, and the fire was extinguished using his hand and water. The contact stated that while her significant other was driving at an undisclosed speed, there was an abnormal burning odor coming from inside the vehicle. The driver pulled over to the shoulder of the road, and there was a fire coming from underneath the driver’s side seat. The driver sustained burns on both hands and severe mental trauma. The contact sustained severe mental distress; however, medical attention was not sought. The vehicle was left at the location for further investigations. Several local dealers were contacted, including Jeff Wyler Hyundai of Colerain (8810 Colerain Ave, Cincinnati, OH 45251). The manufacturer was made aware of the failure. The failure mileage was approximately 160,000.
- Air bags
The passenger seat airbag system warning light is on and stays on, there is an active recall but my vin is not yet included
- Unknown or other
While driving under normal conditions, the panoramic sunroof glass suddenly shattered without warning. There was no impact from road debris, no prior cracking, and no abnormal use of the sunroof. The failure occurred spontaneously and created a safety hazard due to falling glass and the risk of…
While driving under normal conditions, the panoramic sunroof glass suddenly shattered without warning. There was no impact from road debris, no prior cracking, and no abnormal use of the sunroof. The failure occurred spontaneously and created a safety hazard due to falling glass and the risk of driver distraction or injury. This vehicle is equipped with the factory panoramic roof that has been the subject of a prior class action lawsuit and Hyundai Technical Service Bulletin 19-BD-007H (Panoramic Roof Moving Glass Warranty Extension, code TXXE). The failure I experienced is consistent with the known defect described in that settlement and TSB. Hyundai extended coverage for this defect to 10 years or 120,000 miles; however, Hyundai has denied assistance because the time limit has expired, even though the mileage remains within the coverage threshold. Given the known defect and safety implications, this failure should be addressed regardless of warranty expiration. This issue presents a safety concern due to sudden glass shattering while driving and should be investigated further.
- Exterior lighting · Service brakes · Wheels
This has been an ongoing problem since I last reported this on February 16, 2025. There’s a clicking noise under my tires and then I can’t stop, my brakes grind and my pedal grinds… all my ABS lights then come on… this has been going on too long!! Since April 20, 2025…. My brakes are GRINDING…
This has been an ongoing problem since I last reported this on February 16, 2025. There’s a clicking noise under my tires and then I can’t stop, my brakes grind and my pedal grinds… all my ABS lights then come on… this has been going on too long!! Since April 20, 2025…. My brakes are GRINDING SERIOUSLY and PROHIBITING me to fully stop at times. I’ve had several near misses… I want them fixed now!! My car is no longer safe!!! Still doing it today @ 12:18pm with mileage of 130,605… please help!
- Service brakes
On January 26, 2024, at AutoNation, I was requested to bring my 2010 Hyundai Tucson in to replace a part involving my ‘brakes.’ I’m the original owner, since 2021 my brakes would grind at least twice weekly and I was afraid I wouldn’t be able to stop! Then, the AntiLock Brake System lights would…
On January 26, 2024, at AutoNation, I was requested to bring my 2010 Hyundai Tucson in to replace a part involving my ‘brakes.’ I’m the original owner, since 2021 my brakes would grind at least twice weekly and I was afraid I wouldn’t be able to stop! Then, the AntiLock Brake System lights would just pop up out of nowhere and come on, then my brakes would work. So, I was told I needed a new switch. AutoNation never let me explain any of this, they cut me off anytime I tried to explain it. So, last January 2024, the switch was fixed. I’d prefer NOT to go back there again!! It hasn’t been inspected by anyone. NHTSA may inspect it as soon as you would like. Except now, my ABS lights are basically stuck on. This started back again June 2024. No grinding of my brakes now, I just want them fixed properly.
- Engine · Service brakes, hydraulic
The contact owns a 2010 Hyundai Tucson. The contact stated while driving 40-45 MPH, there was an abnormally loud sound coming from underneath the hood and the temperature gauge fluctuated. The vehicle lost motive power. There was no warning light illuminated. The contact was able to pull to the…
The contact owns a 2010 Hyundai Tucson. The contact stated while driving 40-45 MPH, there was an abnormally loud sound coming from underneath the hood and the temperature gauge fluctuated. The vehicle lost motive power. There was no warning light illuminated. The contact was able to pull to the side of the road. The vehicle was towed to the residence. The contact stated that upon opening the hood, an unknown engine part was fractured, and several unknown parts had detached and were leaning on the driver's side of the vehicle. The local dealer was contacted, and an appointment was scheduled for diagnostic testing. The vehicle was not diagnosed or repaired. Additionally, the contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 199,996. VIN tool confirms parts not available.
- Service brakes, hydraulic
The contact owns a 2010 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The dealer was contacted, and the contact was informed that there was no recall associated with…
The contact owns a 2010 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The dealer was contacted, and the contact was informed that there was no recall associated with the VIN. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Service brakes, hydraulic
The contact owns a 2010 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V651000(Service Brakes, hydraulic ); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a…
The contact owns a 2010 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V651000(Service Brakes, hydraulic ); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available. The consumer stated that the manufacturer will contact them via email when a remedy for the vehicle is ready.
- Service brakes, hydraulic
The contact owns a 2010 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2010 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
- Air bags
The contact owns a 2010 Hyundai Tucson. The contact stated that when she started the vehicle, the driver's side air bag warning light illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 100,000.
- Unknown or other
UNKNOWN. Since I purchase this vehicle in 2010, the backup camera does not always work. I took it in to the dealership and they stated that in order to diagnose it, it must happen while I am there. At this time, the backup camera only works sometimes and it is not safe to back up. Is there a manufacturer recall?
- Engine
The engine ran out of oil completely with no leaks no nothing and never had a light come on to show low oil or engine issues. It went from running great to engine knocking with no warning
- Electrical system
The car dies, unknown, mechanics don't know! It's in the wires somewhere, the backup camera doesn't work, the radio doesn't work! Even with the the fuse in and everything working the backup camera still doesn't work, and as soon as you shut the car off it doesn't start up again! Nothing was replaced it's still everything from the factory so you tell me what's wrong!!
- Engine
The contact owns a 2010 Hyundai Tucson. The contact stated that the dealer had repaired the vehicle under Hyundai Technical Service Bulletin Number: 21-01-023H-3 (Engine Monitoring Logic Update). However, two months later, the vehicle stalled while at a complete stop. There was no warning light…
The contact owns a 2010 Hyundai Tucson. The contact stated that the dealer had repaired the vehicle under Hyundai Technical Service Bulletin Number: 21-01-023H-3 (Engine Monitoring Logic Update). However, two months later, the vehicle stalled while at a complete stop. There was no warning light illuminated. The vehicle was pushed to the side of the road. The vehicle was towed to the dealer where it was diagnosed that the Engine Monitoring Logic had failed and an unknown repair needed to be completed. The dealer sent a diagnostic report to the manufacturer who informed the dealer that they would cover half of the repair. The vehicle was not repaired. The contact contacted the manufacturer but was unable to speak to a live agent. The failure mileage was approximately 168,000.
- Electrical system
Door actuators are not working so the locks only work on two of the five doors. Safety and security of the passengers is at risk.
- Electrical system
Every morning the car has to have a jump! We bought a battery! That didn't help! We took it to the shop, they couldn't figure it out but said it was something to do with the electrical but didn't know what, so we started digging on our own and you have to take the fuse out to the radio for the car…
Every morning the car has to have a jump! We bought a battery! That didn't help! We took it to the shop, they couldn't figure it out but said it was something to do with the electrical but didn't know what, so we started digging on our own and you have to take the fuse out to the radio for the car to start! So after spending ALL that money that's what it is, we can't listen to music to start our every morning but now it is getting worse, something else is draining the battery! And no one knows what!
- Structure › Body
The hood flew open while driving
- Unknown or other
Yesterday, my wife car, suddenly started to sharply to the right, when her hold on steering wheel relaxed. I tested it. It is not an alignment problem. It is a sudden and obvious taking over of the steering by the car. I took it to my mechanic. He told me that he and none of his certified…
Yesterday, my wife car, suddenly started to sharply to the right, when her hold on steering wheel relaxed. I tested it. It is not an alignment problem. It is a sudden and obvious taking over of the steering by the car. I took it to my mechanic. He told me that he and none of his certified mechanics have ever seen this problem, and did not know what was wrong and I should contact Hyundai as perhaps there was a recall or service bulletin on this condition. I did that, but was told that I would have to bring it there to be diagnosed. My concern is not so much for my car. I don't know if I want to spend dealership type money to fix the car. My concern is the safety of others. My wife was traveling about 20 mph when this happened, and was able to avid hitting another car. If it happened when she was traveling 60 mph on a four lane highway, it would have been a major disaster. I felt that I needed to bring the problem to your attention, to possibly protect others. THE CONSUMER STATED THE DEALER ADVISED THE PART NECESSARY TO COMPLETE THE REPAIR WAS NO LONGER IN PRODUCTION; THEREFORE, THE VEHICLE COULD NOT BE REPAIRED. MANUFACTURER WAS CONTACTED AND DECLINED ANY ASSISTANCE.
- Engine
Oil pump went out and destroyed the engine
- Power train
Since I got this vehicle the gear shift gets stuck. I have gone to the dealership to get the problem fixed. The problem has been the backlight switch. It IS a big hassle trying to get this problem fixed with the dealership. The backlight switch last two to three years. I got the recall letter about…
Since I got this vehicle the gear shift gets stuck. I have gone to the dealership to get the problem fixed. The problem has been the backlight switch. It IS a big hassle trying to get this problem fixed with the dealership. The backlight switch last two to three years. I got the recall letter about the backlight switch in 2012, but why my vin number IS not listed? The dealership has been charging me every single time I have been there for this constant problem. I almost got kill by the train because of this backlight switch problem. I got stuck a feet away from the rail tracks two weeks ago, there was a car at front of me and I couldn't move the gear shift to reverse. The car decided to move at the last minute and I couldn't do anything. The contention bar was over my windshield so I couldn't move forward and I couldn't move backwards because the gear shift wasn't moving. I have been in the dealership for five times and the last two times, they have kept my car there, but they haven't even touched it. They haven't told me the reason why, but I just found it out. It IS because my vin number IS not listed. This IS a very dangerous problem. Driving a car with this problem once you apply the brakes the gear shift won't work. neither in case you have to park or make a turn. Picking up my daughter from school IS a big problem because once I park, the gear shift doesn't move down, so I have to turn it off up to three times and wait each time two to three minutes until the engine resets itself. Drivers behind me get so frustrated. Would you please help me to list my vin number? I am very concerned driving this car with my family.
- Power train · Suspension
I heard a clunk upon turning right, exiting a parking lot. The rear end of the car started to sway. Fearing a blown tire, I pulled off the road, only to find the left rear wheel pitched at a rather unhealthy angle. After towing the car to my local repair shop it was discovered that the rear cross…
I heard a clunk upon turning right, exiting a parking lot. The rear end of the car started to sway. Fearing a blown tire, I pulled off the road, only to find the left rear wheel pitched at a rather unhealthy angle. After towing the car to my local repair shop it was discovered that the rear cross member was rusted out. Apparently this IS a fairly common occurrence in certain hyundai models. Although out of warranty, it seems like hyundai should be willing to address this issue of rust and stand by their vehicles.
- Latches/locks/linkages · Structure › Body › Door
TL* the contact owns a 2010 hyundai tucson. The contact stated that the locking system started to malfunction with the rear hatch and front passenger door not opening with the remote. the contact stated that the cause of the failure could be the actuator. The contact stated that the malfunction…
TL* the contact owns a 2010 hyundai tucson. The contact stated that the locking system started to malfunction with the rear hatch and front passenger door not opening with the remote. the contact stated that the cause of the failure could be the actuator. The contact stated that the malfunction occurred three times on september 29, 2019 and the front passenger door opened while the vehicle was traveling 70 mph. The dealer and manufacturer were not notified. The vehicle was not diagnosed or repaired. The failure mileage was 213,000.
- Engine
TL* the contact owns a 2010 hyundai tucson. The contact stated that the vehicle was leaking fuel. The fuel puddles underneath the vehicle grew larger each week. The contact called hyundai customer service at 1-855-371-9460, but was not assisted. The contact called keys mission hills hyundai (10240…
TL* the contact owns a 2010 hyundai tucson. The contact stated that the vehicle was leaking fuel. The fuel puddles underneath the vehicle grew larger each week. The contact called hyundai customer service at 1-855-371-9460, but was not assisted. The contact called keys mission hills hyundai (10240 sepulveda blvd, mission hills, ca 91345, (818) 221-4000) and was informed that the vin was included in nhtsa campaign number: 19v063000 (engine and engine cooling). The manufacturer was made aware of the failure. The failure mileage was 109,448. *Js *ln *js
- Engine · Service brakes · Unknown or other
I first noticed white smoke coming from the back of my SUV. I pulled into a store parking lot and tried to park. My main brakes failed. I then tried using my emergency brake. It too failed. white smoke started coming through the vents so I turned them away from me and tried shifting to park with…
I first noticed white smoke coming from the back of my SUV. I pulled into a store parking lot and tried to park. My main brakes failed. I then tried using my emergency brake. It too failed. white smoke started coming through the vents so I turned them away from me and tried shifting to park with no success. I then pressed the main brake again and was able to shift to park. then someone in the parking lot yelled, "your car's on fire! Get out!" I grabbed my keys, cell phone and work badge and as I was getting out, black smoke began filling the cabin. store employees tried to put out the fire with fire extinguishers with no success. Within 10 minutes the front half of the SUV was engulfed in flames! I have no clue what could have caused the brakes to fail nor the reason for the engine to catch fire! I have video and photos for viewing.
- Power train
TL* the contact owns a 2010 hyundai tucson. While the four wheel drive was engaged, the vehicle traveled uphill and the front wheels moved, but the rear wheels seized. The contact stated that the four wheel drive warning indicator illuminated. The vehicle was not taken to a dealer to be diagnosed…
TL* the contact owns a 2010 hyundai tucson. While the four wheel drive was engaged, the vehicle traveled uphill and the front wheels moved, but the rear wheels seized. The contact stated that the four wheel drive warning indicator illuminated. The vehicle was not taken to a dealer to be diagnosed or repaired. the manufacturer was notified and stated that the vehicle was not included in a recall. The failure mileage was approximately 172,000.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Hyundai and Kia ABS Module Fires
The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by…
The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by the equipment supplier Mando. The Part 573 Recall Reports contain varying defect descriptions and differing remedy descriptions for the same or similar equipment supplied by Mando. Safety recalls included in this Audit Query (AQ) review include: Hyundai recalls 20V-520, 20V-543, 21V-161, 21V-160, 21V-303, 22V-056, 22V-810, and 23V-651. Kia recalls 16V-815, 20V-518, 20V-519, 21V-137, 21V-331, 22V-051, 22V-800, and 23V-652 The purpose of this AQ is to evaluate the timeliness and scoping of Hyundai and Kia’s defect decision making and adherence with reporting requirements; and understand the varying defect descriptions and remedies between these recalls.
- Loss of Motive Power
The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles…
The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles spanning Model Years (MY) 2005-2021. The Petitioners cited examples of complaints indicating that the subject vehicles were experiencing rapid loss of engine oil due to oil drain plug back outs, resulting in loss of motive power and/or catastrophic engine damage. Additional complaints were provided which alleged that the oil drain pans lack sufficient structural integrity and are susceptible to cracking. The petition itself can be reviewed at NHTSA.gov under ODI number 11481745. On September 12, 2022, the Office of Defects Investigation (ODI) opened Defect Petition (DP22-003) to evaluate the Petitioners’ request. The Petitioners have provided additional complaints within four supplemental letters dated January 31, 2023, March 21, 2023, May 23, 2023, and August 4, 2023. ODI’s evaluation included the review and analysis of the complaints and supporting information submitted by the Petitioners, as well as additional complaints submitted directly to NHTSA which referenced either the oil drain plug or a crack in the oil pan. After reviewing the available data, ODI has not identified evidence that would support opening a defect investigation into the oil drain pan assemblies of the subject vehicles. Based on a review of the available information, a loss of motive power resulting from an oil drain plug back out has not occurred between the initial sale of a vehicle and the completion of its first oil change. If during an oil change service, a technician fails to remove the existing drain plug gasket before installing a new gasket, it is likely that a proper seal between the drain plug and the oil pan will not be made. An improper seal between the drain plug and oil pan could lead to the backing out on the drain plug, resulting in the sudden loss of oil while driving. Additionally, the provided examples of oil pan cracks were localized to the immediate vicinity of the oil drain plug and/or appeared to be the result of direct-contact with a tool during servicing. There is no information to support that a vehicle-based defect exists relating to the oil pan assembly, and instead the documented incidents are related to the failure to follow the proper maintenance procedures during oil change service. In October 2023, Hyundai published a Technical Service Bulletin (TSB) that provided detailed instructions for oil change service on its gasoline powered vehicles, specifically highlighting the need to remove and replace the existing drain plug gasket prior to reinstalling the drain plug. After a thorough review of the material submitted by the petitioner, the information already in NHTSA's possession, and the potential risks to motor vehicle safety implicated by the petitioners' allegations, NHTSA does not believe that a formal investigation is warranted. Therefore, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA’s reasons for denial of the petition will be published. The reference numbers for the complaints to NHTSA cited by the petitioner can be found in the petition submission documents in the public file for DP22-003. To review those complaints and the additional complaints ODI added to its evaluation which are cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11006829Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10253275This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.
- 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
- 10251284In some areas, a vehicles underbody may exhibit corrosion due to road salt usage. As a preventative measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to the bottom exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain Tucson (LM) vehicles.
- 10251283In certain areas, a vehicles underbody may exhibit corrosion due to road salt usage. As a preventative measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to exterior surfaces of specified underbody components. This service campaign describes the procedure to perform this preventative service on certain Tucson (LM) vehicles.
- 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 10240082A class action lawsuit against Hyundai Motor America (HMA) alleges that certain Hyundai vehicles (Class Vehicles) were manufactured, marketed, sold, and/or leased with an engine defect that can result in sudden engine seizure, stalling, engine failure, and in some circumstances, engine fire, and that some owners and lessees of Class Vehicles have been improperly denied repairs under warranty. Neither HMA nor Hyundai Motor Company have been found liable for any of the claims alleged in the lawsuit. The parties have instead reached a voluntary settlement (the Settlement) to avoid lengthy litigation and to provide owners of Class Vehicles certain benefits.
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
- 10227317Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
- 10227316The warranty coverage for engine repair or replacement regarding engine damage or malfunction from connecting rod bearing wear has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Commercial entities and individuals engaged in the buying, selling, leasing, or renting of motor vehicles, as well as salvaged vehicles, are ineligible for the extended warranty.
- 10227313Op code/part number (reference guide for service campaign T6G)
- 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
- 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 10211675The Powertrain warranty coverage for certain engine repairs and/or replacement where the engine damage or malfunction is related to connecting rod bearing wear, has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
- 10211667Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10211666Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
- 10211664Hyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10211662Certain vehicles that have completed Service Campaign 966 may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
- 10210206Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
- 10210205Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10207803Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10206366Hyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10203282Hyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10203280Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10203277The Powertrain warranty coverage for certain engine repairs and/or replacement where the engine damage or malfunction is related to connecting rod bearing wear, has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
- 10202189Hyundai is conducting a product improvement campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10202180Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
- 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
- 10190038This bulletin provides best practice recommendations when performing brake service procedures.
- 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 10183963This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 10183960This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
- 10180981This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
- 10179244This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
- 10178175This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
- 10176194If you are servicing an applicable vehicle with the following symptoms and DTC, follow the Service Procedure on Page 4. Check Engine light on DTC P0880/P088000 - TCM Power signal error open/short Transmission stuck in 4th gear fail-safe Harsh shift into Reverse and Drive
- 10176182This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 10176178This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
- 10174808This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
Every Hyundai Tucson model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.