2024 Isuzu F-Series

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11011554This information bulletin outlines the procedures for using the mobileye exchange program. Replacement mobileye 8 components can be obtained for vehicles that qualify under this exchange program.
• 11005689Information warranty bulletin_ this bulletin describes certain additional requirements when submitting a regular warranty or parts warranty claim for fuel tank replacement (labor operation code l1281) on 2022-2025my isuzu f-series vehicles.
• 11005680The vehicles check engine malfunction indicator lamp (mil) may be illuminated as a result of the engine fan clutch being constantly engaged while the engine IS running, thereby setting a dtc 3243 in the engine control module (ecm). Follow the published diagnostic in the applicable workshop manual (wsm) dtc 3243. If no fault can be found during this normal diagnosis, follow the service procedure in this bulletin to correct the concern.
• 10249692INFORMATION BULLETIN: Allison recently announced a new transmission fluid: TES 668. While Allison asserts this fluid is interchangeable with TES 295 for its transmissions, it is NOT interchangeable for all Isuzu vehicles. It is important to note that 2018 to 2023 Isuzu F-Series vehicles must USE ONLY the original TES 295 fluid. See Table 1 below for the correct application of TES 295 and TES 668 transmission fluids. Refer to the applicable Workshop Manual for additional information.
• 10246227This bulletin provides information with regards to the isuzu commercial vehicle (cv) service policies and procedures manual (sppm). The isuzu cv sppm (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to and beyond 30 days. Performing these required procedures at the specified intervals will properly maintain vehicles until they are retailed. Failure to follow the procedures outlined may result in repairs and additional costs that could have been avoided. We are providing dealers with this brief overview of the recommended procedures as a reminder to maintain older inventory. Failures resulting from improper, or lack of, storage procedures are not covered under the vehicle factory warranty.
• 10244945The following information is provided to clearly explain Isuzus policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regularly updated for many reasons. These reasons may include, but are not limited to: model year change, software corrections, certification compliance, product improvement and specific application requirements. However, the mere existence of a newer control module calibration does not necessarily mean that warranty coverage exists or that the calibration must be installed. It is not our policy to update control modules, under warranty or after warranty, based solely on the availability of a newer calibration file. Below are our guidelines for reprogramming control modules.
• 10244941This bulletin provides information with regards to the Isuzu Commercial Vehicle (CV) Service Policies and Procedures Manual (SPPM). The Isuzu CV SPPM (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to and beyond 30 days. Performing these required procedures at the specified intervals will properly maintain vehicles until they are retailed. Failure to follow the procedures outlined may result in repairs and additional costs that could have been avoided. We are providing dealers with this brief overview of the recommended procedures as a reminder to maintain older inventory. Failures resulting from improper, or lack of, storage procedures are not covered under the vehicle factory warranty.
• 10244939Isuzu Commercial Truck of America, Inc. is distributing this procedure for adding keyless entry transmitters as a quick reference to help dealers better service the customer. Also included is the clearing procedure for customers who have had transmitters lost or stolen. This procedure may be used to clear all transmitters from the Keyless Entry Control Unit.
• 10240367Isuzu is providing this bulletin to outline Isuzu's policy and procedures for Isuzu vehicles with Tire Warranty Coverage. NOTE: After the Isuzu Tire Warranty expires, additional coverage may be available from the tire manufacturer. Refer to the tire manufacturer's warranty booklet that was provided with the vehicle at the time of the sale.

Every Isuzu F-Series model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.