2006 Lexus IS
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2006 Lexus IS. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2006 Lexus IS. Newest first.
Toyota IS recalling certain model year 2006-2009 lexus IS and model year 2006-2007 lexus GS vehicles. due to insufficient tightening of the fuel pressure sensor connected to an engine fuel delivery pipe with nickel phosphorus plating, there IS a possibility that, over time, the pressure sensor could loosen. if loosening occurs, fuel could leak past a…
Risk and remedy
Risk
Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor and if a fuel leak IS not confirmed, dealers will further tighten the fuel pressure sensor with the proper torque. if a fuel leak IS confirmed, the gasket between the sensor and the fuel deliver pipe will be replaced with a new one, and the sensor will be tightened with the proper torque. this service will be performed free of charge. the safety recall began on march 7, 2011. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2005-2006 avalon, model year 2004-2006 highlander, model year 2004-2006 lexus RX, and model year 2006 lexus GS and IS vehicles. brake fluid containing polymers IS used that acts as lubricants for certain brake system components. if replacement brake fluid IS used that does not contain such polymers, or that contains…
Risk and remedy
Risk
A leak of brake fluid could lead to a change in brake pedal feel and overtime a degradation in braking performance increasing the risk of a crash.
Remedy
Dealers will replace the seal with a newly designed one. this service will be performed free of charge. the safety recall began on november 15, 2010. owners may contact toyota at 1-800-331-4331 and lexus at 1-800-255-3987.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Toyota IS recalling 214,570 my 2006-2008 lexus IS, my 2006-2007 GS and my 2007-2008 LS passenger vehicles equipped with aluminum fuel delivery pipes (fuel rails). ethanol fuels with a low moisture content will corrode the internal surface of the fuel rails. as this condition progresses, the engine malfunction indicator light may illuminate.
Risk and remedy
Risk
Over time, the corrosion may create a pinhole resulting in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect and replace the fuel delivery pipes free of charge. the recall IS expected to begin during february 2009. owners may contact toyota/lexus at 1-800-255-3987.
On certain vehicles, high stress areas may have been created in two specific fuel pipes located in the engine compartment. combined with other factors such as the presence of corrosive agents in fuel, a crack may form over time leading to fuel leakage from the fuel line(s).
Risk and remedy
Risk
Fuel leakage in the presence of an ignition source could result in a fire.
Remedy
Dealers will replace the two involved fuel lines with newly designed lines free of charge. the recall began on december 15, 2007. owners may contact lexus at 1-800-255-3987.
On certain passenger vehicles, if the front seat belt retractors (both driver and front passenger) become locked, they may not release due to a component of the emergency locking system. if the seat belt IS locked in this condition, the occupant may not be able to properly fasten the seat belt.
Risk and remedy
Risk
An occupant not properly wearing a seat belt may have an increased risk of injury during a crash.
Remedy
Dealers will replace the front seat belt assemblies. the recall began on april 21, 2006. owners may contact lexus at 1-800-255-3987.
On certain vehicles, due to improper assembly of the air bag inflator, which IS used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. in this condition, the expansion force of the gas may be insufficient to…
Risk and remedy
Risk
This may increase the risk of injury to the occupant in the involved seating position in the event of a crash.
Remedy
Dealers will replace the specific srs air bag. the recall began on april 6, 2006. owners may contact toyota at 1-888-270-9371, scion at 1-866-548-1851, or lexus at 1-800-255-3987.
Owner complaints
143 complaints3 involved a crash5 involved a fire2 injuries
What owners report most
Latest complaints
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2006 Lexus IS 250. The contact stated that after purchasing the vehicle and driving for two hours, it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 135,000, and at the…
Odometer Fraud. The contact purchased a 2006 Lexus IS 250. The contact stated that after purchasing the vehicle and driving for two hours, it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 135,000, and at the time of scanning the vehicle, it was discovered that the mileage was 221,000. The title showed a different name. A Carfax report was not obtained. The Montgomery police department was contacted and referred him to the NHTSA hotline.
- Visibility/wiper
My dashboard is melting and I understand that there was a campaign to resolve this that ended in 2016. I bought the vehicle in 2019 and it has only gotten worse to the point that the dashboard has a sheen to it that causes a glare on the interior of the windshield when the sunlight hits it, making visibility very difficult.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2006 Lexus IS 250. The contact stated that upon selling the vehicle, the new owner later informed the contact that it was discovered that there was a mileage discrepancy while the vehicle was undergoing a diagnostic test. The vehicle was a private sale. At…
Odometer Fraud. The contact purchased a 2006 Lexus IS 250. The contact stated that upon selling the vehicle, the new owner later informed the contact that it was discovered that there was a mileage discrepancy while the vehicle was undergoing a diagnostic test. The vehicle was a private sale. At the time the contact purchased the vehicle, the mileage was 150,604; however, an Experian Auto Check History Report listed the mileage at over 300,000.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2006 Lexus IS 250. It was discovered that there was a mileage discrepancy. The vehicle was a private seller. At the time of purchase, the odometer mileage was 119,000. The contact purchased a Carfax Report, which indicated that the odometer mileage was…
Odometer Fraud. The contact purchased a 2006 Lexus IS 250. It was discovered that there was a mileage discrepancy. The vehicle was a private seller. At the time of purchase, the odometer mileage was 119,000. The contact purchased a Carfax Report, which indicated that the odometer mileage was reported in September 2022 at 144,556, and the vehicle failed inspection. In addition, in October 2018, the odometer was reported at 155,811.
- Power train
The contact owns a 2006 Lexus IS 250. The contact stated that while driving at an undisclosed speed, there was an abnormal rattling sound coming from underneath the hood. The check engine warning light was illuminated. The vehicle was taken to a local independent mechanic, where it was diagnosed…
The contact owns a 2006 Lexus IS 250. The contact stated that while driving at an undisclosed speed, there was an abnormal rattling sound coming from underneath the hood. The check engine warning light was illuminated. The vehicle was taken to a local independent mechanic, where it was diagnosed with a transmission and radio failure. The local dealer was contacted and informed the contact that the were no recalls associated with the VIN. The manufacturer was made aware of the failure. The failure mileage was approximately 89,000.
- Unknown or other · Visibility/wiper
The dashboard glares when it is sunny outside and at night when cars are driving past on the other side, this is a huge safety issue as it impairs visibility. The dashboard is also very sticky
- Visibility/wiper
Under hot conditions the dashboard and door materials starts to become sticky and it becomes ultra shiny which reflects on the windshield and when the sun is up you can totally loose visibility in front of you, has happened to me a few time when I have to stop because it becomes very dangerous
- Engine
The vehicle is burning engine oil at an increasingly severe rate, with the manual stating that burning 1.1 quarts every 600 miles is normal. This consumption is excessive given the 5.5-quart capacity and the requirement for expensive full synthetic oil, causing frequent and costly top-offs. This…
The vehicle is burning engine oil at an increasingly severe rate, with the manual stating that burning 1.1 quarts every 600 miles is normal. This consumption is excessive given the 5.5-quart capacity and the requirement for expensive full synthetic oil, causing frequent and costly top-offs. This poses a safety risk due to the potential for engine damage or failure if oil levels are not closely monitored. Some owners have had the issue inspected, and Lexus has acknowledged the problem. However, they have stated that repairs require replacing components costing multiple thousands of dollars just for parts, leaving many owners without a feasible solution. This problem is widespread, with numerous reports of similar issues in online forums ( [XXX] ]). A thorough investigation and a more customer-friendly resolution are needed to address this design flaw and ensure reliability and safety. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags
There is a common issue with these makes and models with the drivers side knee air bag having issues with connecting which cause the SRS light go on the dashboard. I called Lexus corporate office and local dealer and they said there was a recall but it expired in 2020. From the research i did, this…
There is a common issue with these makes and models with the drivers side knee air bag having issues with connecting which cause the SRS light go on the dashboard. I called Lexus corporate office and local dealer and they said there was a recall but it expired in 2020. From the research i did, this was a small window and there shouldn’t have been an expiration on the recall for something that is a safety hazard. Because of this, they are charging thousands for this issue that has affected hundreds of thousands of vehicles.
- Air bags
My 2006 Lexus IS350 is subject to NHTSA Recall number 16V340, for passenger airbag replacement. According to the diections on the NHTSA website shown in the following link: [XXX] The dash pad needs to be removed to access the airbag and perform the repair. Ive contacted my 3 local Lexus dealers…
My 2006 Lexus IS350 is subject to NHTSA Recall number 16V340, for passenger airbag replacement. According to the diections on the NHTSA website shown in the following link: [XXX] The dash pad needs to be removed to access the airbag and perform the repair. Ive contacted my 3 local Lexus dealers and was told in various ways that they do not remove the dash to accomplish the repair but instead just remove the glove compartment and associated parts to access the airbag. I wanted the dash replaced (it was cracked) when the old dash was removed to do this recall repair. SInce the dealers do not actually remove the dash, I was told this was not possible. One dealer told me that for an extra $350, the service dept. would do the repair according to the above linked instructions. I have notified Lyndss Tor at lyndzee.tor@toyota.com as well as Toyota Quality Compliance Quality_Compliance@toyota.com and recieved no reply. I hope the NHTSA can enforce the above linked instructions so that the airbag replacement can be conducted in a proper and safe fasion. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags
My dash has cracked and melted due to a manufacturing defect. The Lexus dealers who I have contacted to perform the safety recall for the defective airbags will not replace the cracked dash at the same time. Having the passenger airbag deploy through a cracked dash is an apparent safety issue. Please investigate this
- Unknown or other · Visibility/wiper
The dashboard is melting a known error to Lexus and when the sun hits it reflects off the melted dash and puts a glare on the windshield. Lexus knew about the problem and instead of doing a recall they did an extended warranty back in 2017. I took mine in and assumed they replaced dash and door…
The dashboard is melting a known error to Lexus and when the sun hits it reflects off the melted dash and puts a glare on the windshield. Lexus knew about the problem and instead of doing a recall they did an extended warranty back in 2017. I took mine in and assumed they replaced dash and door panels. Called this year because my dash was melting and they stated all they did was the door panels back in 2017. I have informed my local dealership as well as corporate and neither seem willing to help or fix the issue. There are all kinds of write up online about this issue. It is definitely a safety issue that should have been addressed a while back but wasn’t.
- Air bags
Many people have have issues with the SRS warning light coming on and not going off. This issue seems to stem from harness connection issues that Lexus is aware of and have acknowledged. This needs to be fixed asap!
- Structure › Interior panels › Dashboard
The contact owns a 2006 Lexus IS. The contact stated that the dashboard was melted and was causing vision impairment while driving. The vehicle was taken to the dealer to be inspected. The vehicle was inspected, and the diagnosis was confirmed. The contact was informed that the warranty had…
The contact owns a 2006 Lexus IS. The contact stated that the dashboard was melted and was causing vision impairment while driving. The vehicle was taken to the dealer to be inspected. The vehicle was inspected, and the diagnosis was confirmed. The contact was informed that the warranty had expired. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 92,000. The VIN was unavailable.
- Fuel system, gasoline
The contact owned a 2006 Lexus IS350. The contact stated when she started the vehicle, following an oil change vehicle stalled. The contact stated that she had restarted the vehicle and heard an abnormal popping sound from the engine compartment and flames had burst from under the hood. The contact…
The contact owned a 2006 Lexus IS350. The contact stated when she started the vehicle, following an oil change vehicle stalled. The contact stated that she had restarted the vehicle and heard an abnormal popping sound from the engine compartment and flames had burst from under the hood. The contact stated that she had smelled the odor of gasoline from her vehicle as she had entered the vehicle. The contact stated that the service station employees extinguished the flames. The contact stated that the fire department was called and a report was filed. The manufacturer had not been informed of the failure. The vehicle had not been repaired. The contact had researched online and related the failure to NHTSA Campaign Number: 18V432000 (Fuel System, Gasoline). The failure mileage was approximately 180,000.
- Visibility/wiper
The dash of my vehicle melts on moderately warm days. It gets so shiny that it reflects off the windshield, making it very difficult to see. Others have also complained about the fumes making them physically ill. The manufacturer had a brief program (ZLD) to replace the dashboard, but I did not…
The dash of my vehicle melts on moderately warm days. It gets so shiny that it reflects off the windshield, making it very difficult to see. Others have also complained about the fumes making them physically ill. The manufacturer had a brief program (ZLD) to replace the dashboard, but I did not receive a notification and missed the very short window. I don't understand how this is something that they can now refuse to fix in my vehicle when it clearly affects safety. This is a recurring and persistent issue and has been for years.
- Engine
This is happening on the lexus is250 as while as the 350 the loose bolts could cause the VVT gear housing and sprocket to separate and result in the engine stopping while the vehicle is being driven, increasing the risk of a crash. Toyota is recalling certain model year 2007-2011 Lexus GS350…
This is happening on the lexus is250 as while as the 350 the loose bolts could cause the VVT gear housing and sprocket to separate and result in the engine stopping while the vehicle is being driven, increasing the risk of a crash. Toyota is recalling certain model year 2007-2011 Lexus GS350 vehicles manufactured June 19, 2006, through July 12, 2011; and model year 2006-2011 Lexus IS350 vehicles manufactured May 27, 2005, through July 13, 2011; and model year 2010-2011 Lexus IS350c vehicles manufactured November 25, 2009, through July 19, 2011. These vehicles, equipped with the 2GR-FSE engine, use bolts to secure the housing and sprocket of the Variable-Valve Timing (VVT) system gear assembly. These bolts could become loose due to abnormal impacts generated within the gear assembly immediately after a cold start-up.
- Visibility/wiper
My car unfortunately is subject to the sticky/melting dash which is notorious of being a huge problem with my generation of vehicle. That being the 2nd generation of Lexus is250/350/f which affect the models made from 2006-2013. Lexus made a “customer offer” which entitled owners being able to go…
My car unfortunately is subject to the sticky/melting dash which is notorious of being a huge problem with my generation of vehicle. That being the 2nd generation of Lexus is250/350/f which affect the models made from 2006-2013. Lexus made a “customer offer” which entitled owners being able to go get it fix, however not all owners were made aware of this due to it not being a full on recall but more of a “promotion” that Lexus was doing. I unfortunately was one of many other owners who were not made aware of the promotion taking place and are now according to Lexus too late to fix the issue because the offer “expired”. My sticky dash in particular is very bad. It reflects off into the windshield making it very difficult to see the road clearly when it is glaring due to the sticky/melting dash. It not only poses a safety hazard for me, but to everyone else on the road due to it not letting me see clearly due to how bad the glare is. I was told by Lexus that there is nothing they can do but to pay out of my pocket (3-4K) in order to have it replaced. Lexus claims to “care” for their customers yet are not owning up to help us owners because there special promotion is expired. Knowing how bad the issue was and how practically all cars were subject to the issue, why not make a recall instead of a “promotion”. They screwed over their customers. They screwed over me. I can’t drive my car without fearing for my safety, all due to Lexus not wanted to fix their error when they made the dashboard incorrectly. I hope something can be done because I know there are many other Lexus is250/350/f owners out there that were unfortunate to not have it fix also. It should be a recall, not some limited “promotion” that only a few knew about. It is a “if you were lucky to know” sort of deal and that should not be the case. Especially not when it starts to affect the safety of others and one self.
- Air bags
was in a car accident and air bigs didnt go off
- Unknown or other
1) Keep getting rotten egg smell from exhaust during acceleration; smell like it is coming from catalytic converters/exhaust system or front of engine. Never had or was informed by dealership that exhaust system could be replaced by Lexus although I brought my vehicles in several time for recalls.…
1) Keep getting rotten egg smell from exhaust during acceleration; smell like it is coming from catalytic converters/exhaust system or front of engine. Never had or was informed by dealership that exhaust system could be replaced by Lexus although I brought my vehicles in several time for recalls. Brought vehicle in for recall to Fresno Lexus in 2020 never informed by dealership of Lexus being able to fix issue for free although I had told them of issue. Seems to be very toxic smell; gives me headaches while driving!!!!!!! Lexus should have repaired the issued for free when informed years ago but did nothing!!!!!
- Power train
After having our car in the local dealerships shop to fix recalls and a Very hard jerking of the car when slowing to 8mph thinking it was the ABS accutator, that unit was replaced and system bled and tested we picked the car up and before we got 100 feet away from the shop our car still had the…
After having our car in the local dealerships shop to fix recalls and a Very hard jerking of the car when slowing to 8mph thinking it was the ABS accutator, that unit was replaced and system bled and tested we picked the car up and before we got 100 feet away from the shop our car still had the same problem. After much talking with a lexus forum group I now believe based on their experiences and testing myself it's a Hard 2nd to 1st gear downshift ! and through my investigating, this is a common issue among lexus transmission between years 2006 - 2013
- Air bags · Unknown or other · Visibility/wiper
My dashboard is melting due to a manufacturing defect. The glare from my dashboard makes driving difficult as the glare can blind you. The chemical smell from the melting is horrible. I have placed a dash cover on which has helped but if I am in an accident this dash cover will impede the correct…
My dashboard is melting due to a manufacturing defect. The glare from my dashboard makes driving difficult as the glare can blind you. The chemical smell from the melting is horrible. I have placed a dash cover on which has helped but if I am in an accident this dash cover will impede the correct deployment of my airbag on the passenger side. Also the inside door panels are melting and are becoming a "putty" like substance. Everything sticks to it. Including my clothes. While driving I have had to jerk my arm from the rest on the door trim to remove it. This can cause my vehicle to possibly swerve off the road or into oncoming traffic. Warranty Enhancement Program – ZLD and CUSTOMER SUPPORT PROGRAM ZLZ were the remedies for this issue. But these have expired. The Manufacturer will not honor this or consider this a safety / hazardous issue and correct it now. This is a safety issue and needs to be addressed.
- Unknown or other
While I was driving, I went to slow down to turn around and my car started smoking and caught fire. It started from under the hood towards the passenger side front closer to the headlight you could just start seeing flames coming from there so I put it in park and hopped out and got as much stuff as I could out of the car. There was no warning signs no lights came on nothing.
- Electrical system · Engine · Steering
Power steering keeps going out and steering wheel making grinding noise. Almost crashed when lost steering on freeway. Car also makes noise while starting cold
- Electrical system · Engine · Unknown or other
While driving there was no warning lamps messages or other symptoms to any problems. I went to slow down so I could turn around because I missed my stop. The brakes started feeling less pressure I looked up and there was black smoke coming from under the hood then I saw flames. Then the car blew up
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007456Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006162Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005121Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005063Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11003650To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003648The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003643Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003642Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003641Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 11003595To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003593The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003588Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003587Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003586Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 10214355Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
- 10209023TSB: Some 2005 ? 2022 model year Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10207945POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10205383Spots in Window Glass - vehicle exterior
- 10205352Windshield Wiper Blade Maintenance and cleaning
- 10205346Auto matic Transmission Replacement kPrecautions
- 10205340HVAC Odor Maintenance
- 10205331Immobilizer and Smart Key Reset
- 10205329Immobilizer and Smart Key Reset.
- 10205327Techstream ECU Flash Reprogramming Procedure.
- 10179697TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10179601TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10177780TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
- 10176283Safety Recall and Service Campaign - Technician Certification Requirements
- 10174889TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
- 10174888TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
- 10172827TSB: February 06, 2020: This bulletin is now obsolete. Please see L-SB-0003-20.
- 10164328TSB: REVISION NOTICE July 01, 2019 Rev1: G1668 Applicability has been updated to include 2019 ? 2020 model year Lexus vehicles. G2158 The Techstream Preparation and Process Overview sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit
- 10159694TSB: OBSOLETE NOTICE April 4, 2019: This bulletin is now obsolete. Please see L-SB-0017-19.
- 10155241TSB: OBSOLETE NOTICE February 27, 2019: This bulletin is now obsolete. Please see L-SB-0007-19.
- 10134335DLB Expired on February 28, 2016
- 10134334DLB Expired on February 28, 2016
- 10133873As previously communicated in December 2012, Lexus discovered that the trunk release lever handle in some model vehicles can break if not pulled in the direction specified on the handle. The part has been changed in production and parts have been prepared to support a product update for existing customer vehicles.
- 10133872As previously communicated in December 2012, Lexus discovered that the trunk release lever handle in some model vehicles can break if not pulled in the direction specified on the handle. The part has been changed in production and parts have been prepared to support a product update for existing customer vehicles.
- 10133657TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.
- 10133651TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Lexus vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
Every Lexus IS model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.