2008 Lexus IS
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2008 Lexus IS. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2008 Lexus IS. Newest first.
Toyota IS recalling certain model year 2006-2009 lexus IS and model year 2006-2007 lexus GS vehicles. due to insufficient tightening of the fuel pressure sensor connected to an engine fuel delivery pipe with nickel phosphorus plating, there IS a possibility that, over time, the pressure sensor could loosen. if loosening occurs, fuel could leak past a…
Risk and remedy
Risk
Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor and if a fuel leak IS not confirmed, dealers will further tighten the fuel pressure sensor with the proper torque. if a fuel leak IS confirmed, the gasket between the sensor and the fuel deliver pipe will be replaced with a new one, and the sensor will be tightened with the proper torque. this service will be performed free of charge. the safety recall began on march 7, 2011. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Toyota IS recalling 214,570 my 2006-2008 lexus IS, my 2006-2007 GS and my 2007-2008 LS passenger vehicles equipped with aluminum fuel delivery pipes (fuel rails). ethanol fuels with a low moisture content will corrode the internal surface of the fuel rails. as this condition progresses, the engine malfunction indicator light may illuminate.
Risk and remedy
Risk
Over time, the corrosion may create a pinhole resulting in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect and replace the fuel delivery pipes free of charge. the recall IS expected to begin during february 2009. owners may contact toyota/lexus at 1-800-255-3987.
Owner complaints
102 complaints4 involved a crash4 injuries
What owners report most
Latest complaints
- Engine · Fuel/propulsion system
Vehicle: 2008 Lexus IS350 Issue: Excessive oil consumption and fuel/exhaust odor I am experiencing what I believe is excessive oil consumption with my 2008 Lexus IS350. I’ve had to regularly add oil between scheduled oil changes, and I’ve noticed that the oil level is frequently low with no…
Vehicle: 2008 Lexus IS350 Issue: Excessive oil consumption and fuel/exhaust odor I am experiencing what I believe is excessive oil consumption with my 2008 Lexus IS350. I’ve had to regularly add oil between scheduled oil changes, and I’ve noticed that the oil level is frequently low with no external leaks visible. I’m concerned that this may indicate a known issue with piston rings or internal engine components. In addition to the oil issue, I have recently started smelling strong gas or exhaust fumes while the engine is running, especially at idle or when the car is warm. I am worried that this may be related to catalytic converter damage caused by prolonged oil burning. I believe this may pose both a safety risk and an environmental concern, especially if the catalytic converter is compromised. I have not yet received any recall notices or service bulletins related to this issue, but I am aware that similar Toyota and Lexus models have had oil consumption problems tied to engine design.
- Structure › Body · Unknown or other
The dashboard is melting and makes a glare on the windshield making it hard to see the dashboard is melting and sticky also on the door panels I almost crashed when I couldn’t see due to the glare of the melting dashboard reflecting on the windshield
- Engine · Unknown or other · Vehicle speed control
I was driving approx. 60 entering on ramp of freeway when car suddenly loses power to accelerator not entire car, i almost was hit by other drivers i couldnt accelerate or anything. I panicked then started pumping accelerator then it finally catches and sped up. I immediately got off freeway. Then…
I was driving approx. 60 entering on ramp of freeway when car suddenly loses power to accelerator not entire car, i almost was hit by other drivers i couldnt accelerate or anything. I panicked then started pumping accelerator then it finally catches and sped up. I immediately got off freeway. Then next day CEL, Check VSC light and skid light all came on. This car is very dangerous. WHATCAN I DO??? I refuse to use the freeway until this problem is resolved.
- Exterior lighting · Unknown or other
From my past research I’ve noticed there were recalls about the headlight ballast flashing, and getting replaced my car has this problem but never had a recall. The rear view mirror is fading and turning black making me not able to see. And all of my interior is becoming shiny and brittle making it hard to see out of my vehicle at anytime of day or night
- Unknown or other · Visibility/wiper
The problem I am experiencing pertains to the dash of my Lexus IS 250. The dash cover has melted, most likely due to exposure to heat during sunny days. This melting dash has created a dangerous situation, as it causes a glaring reflection on the windshield, impairing my vision while driving. This…
The problem I am experiencing pertains to the dash of my Lexus IS 250. The dash cover has melted, most likely due to exposure to heat during sunny days. This melting dash has created a dangerous situation, as it causes a glaring reflection on the windshield, impairing my vision while driving. This glare poses a significant safety risk to both my and other road users, especially during sunny days when the reflection becomes more pronounced. My primary concern is that despite being aware of this safety issue and having conducted a recall, Lexus has chosen to put a deadline on addressing this problem. This approach contradicts the fundamental principle of ensuring the safety and well-being of Lexus vehicle owners and other road users. The melting dash issue is a manufacturing fault, and it should be addressed regardless of when it manifests itself.
- Structure › Interior panels › Dashboard · Structure › Interior panels › Door
The contact owns a 2008 Lexus IS250. The contact stated that while the vehicle was parked, the dashboard and the door panels melted causing the vehicle to become sticky. The vehicle was diagnosed and confirmed that there was a recall on melting dashboards, but the recall was no longer active. The…
The contact owns a 2008 Lexus IS250. The contact stated that while the vehicle was parked, the dashboard and the door panels melted causing the vehicle to become sticky. The vehicle was diagnosed and confirmed that there was a recall on melting dashboards, but the recall was no longer active. The vehicle had not been repaired. The manufacturer was made aware of the failure and confirmed that the vehicle was not included in a recall. The failure mileage was approximately 70,000.
- Fuel system, gasoline
The contact owns a 2008 Lexus IS250. The contact stated that while his wife was driving at an undisclosed speed, there was an abnormally strong fuel odor coming from the vehicle. The failure persisted and the fuel light frequently illuminated on the instrument panel after refueling. The contact…
The contact owns a 2008 Lexus IS250. The contact stated that while his wife was driving at an undisclosed speed, there was an abnormally strong fuel odor coming from the vehicle. The failure persisted and the fuel light frequently illuminated on the instrument panel after refueling. The contact inspected the vehicle and discovered fuel residue in the fuel pressure sensor located by the intake manifold. Upon investigation, the contact discovered NHTSA Campaign Number: 18V432000 (Fuel System, Gasoline) which he linked to the failure. The manufacturer and the dealer were notified of the failure; however, the contact was informed that the VIN was not included in the recall. The vehicle was not repaired. The failure mileage was approximately 102,000.
- Engine
Upon starting vehicle, engine loudly rattles for aprox. One second as if something IS loose. This instance IS directly in line with lexus tsb "l-sb-0155-08" (engine - brief engine knock/rattle on cold start up). Further investigation shows this IS a major concern as this involves a faulty camshaft assembly.
- Structure › Body · Unknown or other
- The door panel and dashboard is melting under normal to warm weather conditions. Yes. - The rubber is degrading and coming off in pieces . I am concerned that inhalation or contact with this rubber material is a chemical hazard and/or carcinogenic. Also, the shiny sticky dash impedes my driving…
- The door panel and dashboard is melting under normal to warm weather conditions. Yes. - The rubber is degrading and coming off in pieces . I am concerned that inhalation or contact with this rubber material is a chemical hazard and/or carcinogenic. Also, the shiny sticky dash impedes my driving visibility with a constant glare. - Yes, Lexus offered a limited recall for 2-3 years only. I was never informed of the issue despite going to a Lexus dealership for another safety recall in 2017. - It has been inspected by Toyota but not Lexus. - The rubber began to noticeably degrade in 2019, however, it’s likely it began earlier. It has progressively worsened over time. The recall expired in 2018. I informed Lexus, who greedily stated that they could not help me despite them knowingly installing faulty, failing parts in the car, which may be carcinogenic, and as well as, negatively diminishes my visibility with a reflective glare. Plastic and rubber should not melt at normal temperatures and I have never encountered this issue with any car I’ve ever owned.
- Structure › Body · Unknown or other · Visibility/wiper
Dashboard and door panels are melting to the point that (short) nails get stuck every time we drive. Car is parked under a roof and it’s still melting. Poor visibility due to shine.
- Unknown or other
front dashboard is sticky, cracked, and peeling off as well as the front and back door panels.
- Air bags · Steering
The contact owned a 2008 Lexus IS350. The contact stated while driving approximately 15 mph, the steering wheel began to turn to the left independently and crashed into a parked vehicle. The contact’s vehicle rolled over and landed on its roof before stopping. None of the air bags deploy upon…
The contact owned a 2008 Lexus IS350. The contact stated while driving approximately 15 mph, the steering wheel began to turn to the left independently and crashed into a parked vehicle. The contact’s vehicle rolled over and landed on its roof before stopping. None of the air bags deploy upon impact. A bystander assisted the contact to exit the vehicle by breaking the front passenger side window with his foot. The contact was transported to the hospital by ambulance. The contact sustained bruising on her face and body. A police report was filed. The vehicle was towed to the insurance company lot and deemed totaled by the insurance company. The manufacturer was not made aware of the failure. Prior to the failure, the vehicle was serviced for the air bags recall however, the dealer only replaced the passenger’s side air bag inflator and used masking tape for the engine hoses. The failure mileage was approximately 95,000. Seat belt held the consumer upside down like a hammock. The black box did not say seat belt was in use. Prior to accident consumer was driving by construction site and heard loud screeching scraping under car. Car steering or linkage went out and car went to left. Consumer did not intentionally steer car left. Consumer was blamed for accident when car malfunctioned.
- Unknown or other
The dash is melting and is extremely sticky. On sunny days, the sunlight reflects off of the dash and onto the windshield obstructing the driver's view. In addition, anything that gets on the dash sticks and cannot be removed. This debris also reflects on the windshield causing issues with…
The dash is melting and is extremely sticky. On sunny days, the sunlight reflects off of the dash and onto the windshield obstructing the driver's view. In addition, anything that gets on the dash sticks and cannot be removed. This debris also reflects on the windshield causing issues with visibility. I have contacted Lexus directly and have been told they will not repair or replace the dash because this was only a TSB and my car is now beyond the term for the TSB. This is something that should be a recall because it prevents the driver from being able to see what is happening in front of the vehicle and could cause an accident.
- Electrical system
Electrical Issues started at approximately 30,000 miles. Random times of power windows not rolling down or back up. Random times of Radio controls not working. After recall of airbags was completed, the Navigation system started having Random issues with the touchscreen. Sometimes it would work and…
Electrical Issues started at approximately 30,000 miles. Random times of power windows not rolling down or back up. Random times of Radio controls not working. After recall of airbags was completed, the Navigation system started having Random issues with the touchscreen. Sometimes it would work and sometimes it didn't. Eventually the touchscreen on the Navigation quit working at all. When the door panels were replaced, the windows started working more consistently. The Air Conditioner stopped working one day. The next day after driving it back into the driveway, over the driveway bump, it started working. The entire electrical system seems like there are wires that make a connection, then maybe come loose just barely enough to no longer make a connection. And just a mechanic's hand brushing against something during a normal maintenance check up fixes it temporarily. Or hitting a bump in the road. Every issue is ELECTRICAL related. There are many other IS250 owners with the same issues all over public forums online. Many too that their Navigation no longer worked after few miles on the car. Could these electrical issues cause a fire? How do we know it can't? It's always a worry when I drive my car.
- Air bags
Airbag light keeps going on and off. Looked up on google. A lot of people are having this issue. I filed for a complaint before and got no response.
- Visibility/wiper
Melted dash board
- Unknown or other
Extremely terrible material used on the dash and door panels. Sticky black material sticking to my children and their clothes.
- Air bags
The wiring harness for the front passenger airbag was recalled by lexus because it is too short and frequently becomes disconnected which disables the front passenger airbag and cause the air bag light to turn on on the instrument panel. Lexus sent a letter informing me of the recall, but it was…
The wiring harness for the front passenger airbag was recalled by lexus because it is too short and frequently becomes disconnected which disables the front passenger airbag and cause the air bag light to turn on on the instrument panel. Lexus sent a letter informing me of the recall, but it was sent to my parents house and I did not receive it in time. After finding the recall letter, the pandemic also prevented me from making it to the dealership in time. The letter they sent me also had no markings to indicate it was a recall or that the information inside was important in any way so the letter was easily ignored. I spoke with a lexus dealership and lexus corporate and they both refused to perform the safety repair because I was about 2 to 3 months past their deadline (June 2020?). As a result, my front passenger air bag is inoperable and any front riding passenger in my vehicle is at a greatly increased safety risk in the event of a serious crash. Lexus admitted the problem with their wiring harness and instituted a recall, so I don't think it is fair for them to potentially sacrifice the lives and the safety of my front riding passengers because of a superficial deadline. I would appreciate any help you could provide in convincing lexus to honor their safety recall for my vehicle. Thank you.
- Engine
This vehicle has an oil consumption problem the same as other toyota vehicles in the class action lawsuit relating to owners having to constantly spend money on oil due to a defect in the engine. This toyota/lexus engine defect consumes oil and this problem grows worst as the vehicles get older.…
This vehicle has an oil consumption problem the same as other toyota vehicles in the class action lawsuit relating to owners having to constantly spend money on oil due to a defect in the engine. This toyota/lexus engine defect consumes oil and this problem grows worst as the vehicles get older. Toyota knew of this issue but did not inform customers, and will not help in the repair or do a recall. This problem can cause the engine to fail and cause a host of other issues.
- Unknown or other
My issue pertains to the sticky dash and the same materials used on parts of the door near the handles. When the temperature gets over 80 degrees the material starts to melt and becomes extreme hot and sticky. When I tried to grab papers I left on the dash I had to tear them off and it left a…
My issue pertains to the sticky dash and the same materials used on parts of the door near the handles. When the temperature gets over 80 degrees the material starts to melt and becomes extreme hot and sticky. When I tried to grab papers I left on the dash I had to tear them off and it left a sticky substance. It also can become extremely hot and when I hit any part of the dash when heated it burns and sticks to me. I attempted to contact lexus and they declined my claim because it IS not a 'safety issue to them or the nhtsa'
- Visibility/wiper
The rear view mirror has become unusable- mirror has black scratches all over on the inside & keeps getting worse. Do a google search & you'll find 100S of complaints on forums & chats. It's 1500 bux to get this replaced & it's not a users fault! Lexus has fully aware of this for years & never did a recall. I can't see from this mirror at all & def. Not at night. If I get in a wreck, it will be 100% on lexus!
- Fuel/propulsion system · Power train
Fuel pressure sensor shorted out inside
- Air bags
I received a letter about a recall after being told I will receive a call back. After a few weeks I contacted lexus set a date of service was given a rent a car by lexus was told for free but I paid a deposit. Lexus has refunded me my money after I pick up my car a loud noise was coming from the…
I received a letter about a recall after being told I will receive a call back. After a few weeks I contacted lexus set a date of service was given a rent a car by lexus was told for free but I paid a deposit. Lexus has refunded me my money after I pick up my car a loud noise was coming from the dash I contacted lexus via email and scheduled a date was told that they forgot to close a lid and that what was making the noise that time they gave me a lexus loaner not a rent a car. But it's still making that noise my car never made that noise I go in for a recall service and it feels like I should have never gone now I'm scared to drive to not break anything the noise happens when I turn the ac on ether parked or drive I have video of the noise
- Air bags · Steering
Got a airbag light on when I started my car this morning. Everything IS intact. Was reading forums about it. Says this problem IS very common. Please let me know I did not take a picture. But if needed I can take a picture and send it to you.
- Unknown or other
Door panels melting
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007456Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006162Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005121Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005063Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11003650To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003648The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003643Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003642Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003641Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 11003595To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003593The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003588Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003587Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003586Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 10217806CSP: Takata CSP Coverage Job Aid - published 7.28.2022
- 10217805CSP: On July 30, 2018, a settlement of claims for Economic Loss related to Takata airbag inflators was approved for full implementation. The settlement includes Lexus?s agreement to provide a Customer Support Program (?CSP?) for 2002-2019 model year (MY) vehicles originally equipped with certain Takata airbag inflators or repaired under a recall with Takata airbag inflators to provide coverage for repairs of the airbag inflator contained in the airbag module. This CSP letter is to help clarify how to administer this coverage in accordance with the settlement. This is NOT a recall or a campaign, but is provided to reassure owners that Lexus stands behind the reliability of our vehicles
- 10214355Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
- 10207945POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10205383Spots in Window Glass - vehicle exterior
- 10205346Auto matic Transmission Replacement kPrecautions
- 10190468Lexus Safety Recall and Service Campaign - Technician Certification Requirements
- 10176283Safety Recall and Service Campaign - Technician Certification Requirements
- 10155241TSB: OBSOLETE NOTICE February 27, 2019: This bulletin is now obsolete. Please see L-SB-0007-19.
- 10132902TSB: REVISION NOTICE November 10, 2016 Rev1: ? Applicability has been updated to include 2015 ? 2017 model year applicable Lexus vehicles. ? The Parts Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2006 ? 2017 model year Lexus vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
- 10132625TSB: Revision Notice: Applicability section has been updated to include 2016-2017 applicable model year Lexus vehicles. The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10131836TSB: REVISION NOTICE March 22, 2017 Rev2: ? Applicability has been updated to include 2016-2017 model year Lexus vehicles. ? February 11, 2015 Rev1: Applicability has been updated to include 2006 ? 2015 model year Lexus vehicles. On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this condition.
- 10060828Summary to be provided on a future date.
- 10058268Lexus 2003-2008 GX 470, 2006-2008 IS, 2007-2008 ES 350, 2007 ls460, 2004-2006 RX 330, 2007-2009 RX 350, 2005-2008 RX 400H. This tsb contains owner notification letter. Select document search button below. Due to humidity or heat, some vehicles may experience cracked, or sticky or melting dash boards. Updated 10/30/15.
- 10045639Lexus: precaution information on removal, inspection, installation of accelerator pedal sensor assembly, which requires no lubrication. Models 2001-13 ct200h, es300, 300H, 330, 350, gs300, 350, 450, 450H, 460, gx460, 470, hs250h, IS f, is250, 250C, 350, 350C, lfa, ls430, 460, 600H, lx470, 570, rx330, 350, 400H, 450H, sc430.
- 10042970Lexus: information on some vehicles that may experience a knock or rattle noise coming from the engine upon a cold soak start up for a brief period of time.
- 10039124Toyota: transmission or park/neutral switch installation information.
- 10037625Lexus: information on an improved transmission fluid.
- 10023163Floor mat installation during (pds) pre-delivery service.
- 10022803Tire pressure warning valve/sensor activation.
- 10022140Tire positioning before new vehicle delivery.
Every Lexus IS model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.