2007 Lexus IS
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2007 Lexus IS. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2007 Lexus IS. Newest first.
Toyota IS recalling certain model year 2006-2009 lexus IS and model year 2006-2007 lexus GS vehicles. due to insufficient tightening of the fuel pressure sensor connected to an engine fuel delivery pipe with nickel phosphorus plating, there IS a possibility that, over time, the pressure sensor could loosen. if loosening occurs, fuel could leak past a…
Risk and remedy
Risk
Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor and if a fuel leak IS not confirmed, dealers will further tighten the fuel pressure sensor with the proper torque. if a fuel leak IS confirmed, the gasket between the sensor and the fuel deliver pipe will be replaced with a new one, and the sensor will be tightened with the proper torque. this service will be performed free of charge. the safety recall began on march 7, 2011. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2004-2010 passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. these changes address the risk of pedal entrapment due to interference with the floor mat. redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. additionally, software modifications will be installed on camry, avalon and lexus ES 350, IS 350 and IS 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. toyota will begin mailing letters to owners on december 31, 2009. owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
Toyota IS recalling 214,570 my 2006-2008 lexus IS, my 2006-2007 GS and my 2007-2008 LS passenger vehicles equipped with aluminum fuel delivery pipes (fuel rails). ethanol fuels with a low moisture content will corrode the internal surface of the fuel rails. as this condition progresses, the engine malfunction indicator light may illuminate.
Risk and remedy
Risk
Over time, the corrosion may create a pinhole resulting in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect and replace the fuel delivery pipes free of charge. the recall IS expected to begin during february 2009. owners may contact toyota/lexus at 1-800-255-3987.
Owner complaints
122 complaints6 involved a crash1 injuries1 deaths
What owners report most
Latest complaints
- Electrical system · Service brakes · Steering
The headlights continusely shot off while driving. The shift solenoid are stuck off causing the check engine light to continuously remain on. This all began 2023.
- Electrical system · Engine · Unknown or other
Hello: I own a 2007 Lexus IS250. My vehicle has had an ongoing engine misfire issue and has run extremely rough. In addition, my SRS light and there is an issue with the driver's side knee air bag inflator connector. Finally, my dashboard, front and rear door panels have been sticky and melted…
Hello: I own a 2007 Lexus IS250. My vehicle has had an ongoing engine misfire issue and has run extremely rough. In addition, my SRS light and there is an issue with the driver's side knee air bag inflator connector. Finally, my dashboard, front and rear door panels have been sticky and melted over time when it is hot and there is no reason why this is occurring. The dashboard and door panels become glossy, crack and have broken off into pieces and the shine/gloss from the dashboard causes blinding while driving due to the reflection of the sun on the dashboard. These issues have been going on for a period of over 10 years and I had multiple accidents due to these numerous issues. I have reported these to Lexus corporate on multiple occasions, including in 2016 and 2017. However, Lexus has refused to fix them stating that they are aware of these issues and had the ZLJ, ZLD and ZLA warranty programs but that they had expired in 2017. However, I later found out that none of those programs had expired at the time I called Lexus's corporate office. One of their programs, the ZLD warranty program, was apparently extended until 2021, however, Lexus failed to inform most vehicle owners of this. These issues are a safety issue. They have caused my car to malfunction for over 10 years and to have accidents. Many Lexus owners have also reported about these issues in Lexus owner forums on the internet and have stated that they have had accidents due to these issues, but Lexus failed to properly inform customers of the extended warranty and refused to fix these cars. With these issues continuing and becoming worse over the years, they are no longer a warranty issue, but a safety issue for drivers. I am requesting that the NHSTA investigate this issue and require, if possible, that Lexus issue safety recalls for these known defects and fix these issues immediately to prevent car accidents.
- Visibility/wiper
The dashboard material has degraded into a sticky, high-gloss liquid state. In direct sunlight, this creates a severe reflective glare on the interior of the windshield, causing temporary blindness and significantly obscuring my view of the road, pedestrians, and traffic signals. This manufacturer…
The dashboard material has degraded into a sticky, high-gloss liquid state. In direct sunlight, this creates a severe reflective glare on the interior of the windshield, causing temporary blindness and significantly obscuring my view of the road, pedestrians, and traffic signals. This manufacturer defect makes the vehicle unsafe to operate under normal daytime driving conditions. While driving on March 26, 2026, the sun hit the degraded dashboard, creating a mirrored reflection on the windshield that completely obscured my view of the road/pedestrians. This is a recurring safety hazard caused by the material's chemical failure. I have contacted Lexus Headquarters (Case # 260327002525) and that they refused to mitigate this known safety hazard because their "Customer Support Program" (ZLZ) had expired.
- Engine · Structure › Body
Engine is consuming too much oil regularly. I have to fill in a quart every 600 miles or so. Interior panels are melting
- Air bags
The contact's son owned a 2007 Lexus IS250. The contact stated while her son was driving at 15 MPH through an intersection, another speeding vehicle that did not have the right-of-way, crashed into the passenger's side of the vehicle, causing the front end of the vehicle to crash into another…
The contact's son owned a 2007 Lexus IS250. The contact stated while her son was driving at 15 MPH through an intersection, another speeding vehicle that did not have the right-of-way, crashed into the passenger's side of the vehicle, causing the front end of the vehicle to crash into another vehicle. The contact's son was knocked unconscious. The air bags failed to deploy. There was no warning light illuminated. The emergency services escorted the contact's son to the nearest hospital, where he passed away a few days later. The vehicle was towed and totaled. A police report was filed. The contact stated that the vehicle had previously been serviced and had passed State inspection. The local dealer was not notified of the failure. The manufacturer was made aware of the failure, but no assistance was provided. The failure mileage was approximately 135,000. The contact is requesting a phone call in regards to this case.
- Structure › Body
My vehicle has a sticky door panel issue that is easily damaged/defected when in contact. Due to the material chosen by the manufacturer, the door panels are easily defected in scratches, sun damage, flaking, etc.. I been in contact with other 2007 Lexus IS 250 owners that have the same complain on…
My vehicle has a sticky door panel issue that is easily damaged/defected when in contact. Due to the material chosen by the manufacturer, the door panels are easily defected in scratches, sun damage, flaking, etc.. I been in contact with other 2007 Lexus IS 250 owners that have the same complain on their vehicle. I called the dealership and they also confirmed the issue, but they were unable to assist me and recommended me to file a complaint with NHTSA. I simply request to have a recall on my vehicle (VIN) to have my door panels replaced by the manufacturer at no out-of-pocket cost to me. Thank you!
- Steering · Structure › Body · Wheels
The dashboard melted again, I had the TSB in 2017 to replace the dash. It is now again melted and obstructs your view by shining onto to the front windshield, obstructing the front view of the driver can cause impairment of vision and could lead to collision. The rear view mirror has black…
The dashboard melted again, I had the TSB in 2017 to replace the dash. It is now again melted and obstructs your view by shining onto to the front windshield, obstructing the front view of the driver can cause impairment of vision and could lead to collision. The rear view mirror has black corrosion on it making it impossible to see clearly in the rearview and also obstructing your view which could cause an accident due to limited visibility when changing lanes. Sometimes when driving or parking the power steering locks the steering wheel in place intermittently, could not get it to happen at dealer but happened before and is a severe road hazard( Shows P/S in red on dash) dash lights VSC and traction control intermittently light up and go away. Obviously it is a hazard if the steering locks up when driving. Lexus oem alloy wheels chipping, not a hazard but cosmetic and disappointing.
- Power train
Lexus as made these cars with sealed transmissions Lexus says not to change transmission fluid but 2006 to 2013 has had known issues by many people of transmissions going out and need replaced the car will not reverse and jerks or the drive become reverse and neutral becomes drive at times this is not just a one car issue there are many is250s with this issue just search the web..
- Air bags
Air bag light came on out of nowhere, went to take the car in for diagnosis and they stated that the issue code was the airbag B1861 is open in drivers side knee airbag squib circuit. Now all airbags are disabled due to circuit malfunction.
- Unknown or other
My vehicle has a sticky dashboard and has a reflection to my front windshield. When it is sunny, that reflection is very blinding when I’m driving. My vehicle is available for inspection if needed. I am scared for myself and my passengers when I’m driving. My vision is 20/20 and this reflection…
My vehicle has a sticky dashboard and has a reflection to my front windshield. When it is sunny, that reflection is very blinding when I’m driving. My vehicle is available for inspection if needed. I am scared for myself and my passengers when I’m driving. My vision is 20/20 and this reflection is very bothersome. The issue has been confirmed by my local mechanic. I called the dealership and they also confirmed the issue, but they were unable to assist me and recommended me to file a complaint with NHTSA. The vehicle has not been inspected by the manufacturer (I offered to do so but they did not confirm an appointment for any further assistance), police, insurance, etc. There were no warning lamps, or any notices for this issue.
- Air bags · Unknown or other · Visibility/wiper
The dash is shining and obstructs my view of the road
- Unknown or other
I have a 2007 lexus is350 with the melting dashboard and door panels. The dashboard causes a terrible glare that reflects off the windshield and making it difficult to see the road and causes a smell in the car as well.
- Visibility/wiper
I purchased a previously-owned Lexus IS 250 in 2017. At the time I was unaware of the "melting dashboard" issue that is associated with the make and model. As I begin to notice the sticky appearance of the dashboard, I began to conduct some research. During my research, I found that Toyota…
I purchased a previously-owned Lexus IS 250 in 2017. At the time I was unaware of the "melting dashboard" issue that is associated with the make and model. As I begin to notice the sticky appearance of the dashboard, I began to conduct some research. During my research, I found that Toyota Corporation was aware of the situation and issued an extended warranty and that a recall has never been issued. Unfortunately, my complaints to Lexus other reiterated this decision. The melting dashboard has become a safety concern. When the sun shines on the dashboard, it produces a reflection that makes for poor visibility. (For the date this incident occurred, I am entering that date of filing this form).
- Air bags
UNKNOWN The airbag light continues to come on and off, also the check VSC keeps coming on. Not sure what the issue is. I feel unsafe and uncomfortable with this occurring!
- Steering
Power steering stopped working while backing out of a parking space in a parking garage in tampa, fl. it happened without a sound and without warning, and hasn't worked ever since.
- Unknown or other
My dashboard IS cracking and melting. So IS the door panels.
- Air bags · Seat belts
The ars light comes on and will not go off, was advised that lexus no longer makes this part so I can not get it fixed this was a part of a previous campaign recall but I am still having the issue
- Fuel/propulsion system · Service brakes · Unknown or other
Lexus knows about and will not fix the 1ST generation of direct fuel injection on the is250/350 engines model years 2006-2013. lexus claims to me that when in cold climates the fuel will condense on cylinder walls and then contaminate the oil. this running rich problem then causes the engine…
Lexus knows about and will not fix the 1ST generation of direct fuel injection on the is250/350 engines model years 2006-2013. lexus claims to me that when in cold climates the fuel will condense on cylinder walls and then contaminate the oil. this running rich problem then causes the engine computer to trip or present failure codes and then deactivating the vehicle stability control safety functions that are needed when the car IS driven in cold climates. lexus said they had a program in place to deal with this problem but it expired before my car presented symptoms, this was due to the car being stationed with me in warm climates from 2008 to 2012. lexus refuses to help rectify the situation.
- Unknown or other
My 2007 lexus is350 thats under 100K miles has the sticky dashboard and door panels problem and the glare from the sun reflects off the dashboard and into the windshield which IS causing me a hard time seeing. I even bought a dash cover mat for my car but it just falls of because none of the tape…
My 2007 lexus is350 thats under 100K miles has the sticky dashboard and door panels problem and the glare from the sun reflects off the dashboard and into the windshield which IS causing me a hard time seeing. I even bought a dash cover mat for my car but it just falls of because none of the tape would stick to the dashboard. Also on top of the dashboard by the windshield, it started warping/ little bit of the dashboard sticking out. I know lexus had a customer support program for the dashboard but mine ended in 2017 and the previous owner never got the recall done. Recently, lexus started a zlz program for other models thats barely affected and I just don't get why they didn't extend the warranty program for the IS models from years 2006-2008 since these years are the most effected. All I want IS to get my dashboard and door panels replaced and I definitely know other people with the same problem as me wants to get it replaced as well. Lexus needs to extend the customer program again for the people who never got it replaced. I feel that I shouldn't pay for something I didn't cause. The manufacture made the defective part and they should be the ones replacing it if the vehicle IS effected.
- Air bags
We had the passenger airbag replaced as part of a recall. This work was performed by a certified lexus dealership. When we got the car back after the repair, the passenger airbag light showed 'off' even with a passenger in the seat. This airbag light and sensor had always worked correctly prior to…
We had the passenger airbag replaced as part of a recall. This work was performed by a certified lexus dealership. When we got the car back after the repair, the passenger airbag light showed 'off' even with a passenger in the seat. This airbag light and sensor had always worked correctly prior to the airbag replacement by lexus. There are multiple complaints of the airbag wiring harness being too short and the replacement airbag causing this same issue for many other lexus owners. When we brought the car back to lexus, they said we would need to purchase a new ecu sensor for thousands of dollars and that this issue was not part of the recall and not caused by the repair. Again, this issue arose due to the replacement of the airbag which was performed by lexus and a required recall.
- Unknown or other
The dashboard & sideboard panels are melting and IS sticky. It's dangerous to drive and should be a safety recall as when the sun shines the reflection IS blinding and I can not see in front of me. I would consider this a safety issue and it should be a recall.
- Unknown or other
The dash and side panels get extremely sticky and. Have an odor that affects vision while driving not to mention the glare from the dash. toyota and lexus are aware of the problem as there was a class action lawsuit against them that was dismissed once they agreed to take care of the problem.…
The dash and side panels get extremely sticky and. Have an odor that affects vision while driving not to mention the glare from the dash. toyota and lexus are aware of the problem as there was a class action lawsuit against them that was dismissed once they agreed to take care of the problem. They failed to follow thru leaving approximately 3.5 million vehicles with the problem. I have spoken to lexus with their attitude being not a thing are they willing to do.
- Structure › Body
My dash and door cover are melting and piece are falling off
- Steering
Steering wheel IS hard to turn while driving/ parking and sometimes freezes on the highway in a run as if something IS holding on to it like a magnet, and you have to pull on it real hard to get it back under control . I thought my car was the only car doing it but when I went on lexusfourms I've…
Steering wheel IS hard to turn while driving/ parking and sometimes freezes on the highway in a run as if something IS holding on to it like a magnet, and you have to pull on it real hard to get it back under control . I thought my car was the only car doing it but when I went on lexusfourms I've seen that there was many car with the same issue stating that lexus rack and pinion IS faulty and will cause you to crash if your not used to it
- Air bags · Suspension
The cover over the front passenger IS detached and hanging open. This happened some time following a recall repair. I am concerned that something IS wrong. both front wheel ball joints failed and I was told that this was a dangerous situation. I had them replaced as I was traveling and not able to go to a lexus dealer.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007456Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006162Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005121Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005063Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11003650To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003648The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003643Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003642Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003641Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 11003595To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003593The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003588Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003587Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003586Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 10214355Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
- 10209023TSB: Some 2005 ? 2022 model year Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10207945POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10205383Spots in Window Glass - vehicle exterior
- 10205352Windshield Wiper Blade Maintenance and cleaning
- 10205346Auto matic Transmission Replacement kPrecautions
- 10205340HVAC Odor Maintenance
- 10205331Immobilizer and Smart Key Reset
- 10205329Immobilizer and Smart Key Reset.
- 10205327Techstream ECU Flash Reprogramming Procedure.
- 10190468Lexus Safety Recall and Service Campaign - Technician Certification Requirements
- 10179697TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10179601TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10177780TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
- 10176283Safety Recall and Service Campaign - Technician Certification Requirements
- 10174889TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
- 10174888TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
- 10172827TSB: February 06, 2020: This bulletin is now obsolete. Please see L-SB-0003-20.
- 10164328TSB: REVISION NOTICE July 01, 2019 Rev1: G1668 Applicability has been updated to include 2019 ? 2020 model year Lexus vehicles. G2158 The Techstream Preparation and Process Overview sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit
- 10159694TSB: OBSOLETE NOTICE April 4, 2019: This bulletin is now obsolete. Please see L-SB-0017-19.
- 10155241TSB: OBSOLETE NOTICE February 27, 2019: This bulletin is now obsolete. Please see L-SB-0007-19.
- 10134335DLB Expired on February 28, 2016
- 10134334DLB Expired on February 28, 2016
- 10133873As previously communicated in December 2012, Lexus discovered that the trunk release lever handle in some model vehicles can break if not pulled in the direction specified on the handle. The part has been changed in production and parts have been prepared to support a product update for existing customer vehicles.
- 10133872As previously communicated in December 2012, Lexus discovered that the trunk release lever handle in some model vehicles can break if not pulled in the direction specified on the handle. The part has been changed in production and parts have been prepared to support a product update for existing customer vehicles.
- 10133657TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.
Every Lexus IS model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.