2011 Nissan Frontier
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Nissan › Frontier › 2011
These records cover every 2011 Nissan Frontier. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2011 Nissan Frontier. Newest first.
Nissan North America, Inc. (Nissan) is recalling certain 2008-2011 Titan, Frontier, Xterra, Pathfinder, Armada, and 2008-2009 Quest vehicles. The resin emblem on the driver's air bag cover may develop cracks and detach during air bag deployment.
Risk and remedy
Risk
A detached emblem can become a projectile during air bag deployment, increasing the risk of injury to vehicle occupants.
Remedy
Dealers will replace the drivers airbag cover. Owner letters were mailed December 8, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall are PC944, PC945, and PC946.
Owner complaints
64 complaints4 involved a crash1 involved a fire4 injuries
What owners report most
Latest complaints
- Power train
Transmission fluid mixing with coolant in radiator!
- Forward collision avoidance › Automatic emergency braking · Service brakes
The brakes have failed several times, seems to be a known issues and affecting others. While our Nissan Truck is older, we had our Nissan checked at Midas, and then at the local Continental Nissan location, that didn’t really help, found a part that helped but only for a short period of time, as…
The brakes have failed several times, seems to be a known issues and affecting others. While our Nissan Truck is older, we had our Nissan checked at Midas, and then at the local Continental Nissan location, that didn’t really help, found a part that helped but only for a short period of time, as this part crapped out again yesterday 3/19/2025, and even though the brake pushed to the floor trying to stop as the brakes stopped working again! The part was only approx 2-5 months old. Nissan Frontier dealership or other places to find the actual parts needed have no real parts that would actually fix the issue. It is very sad for those in the same issue as us, pay $$$ for a used vehicle that cannot seem to be fixed, if they have even tried. I’m pretty sure nothing will be done, but wanted to file this complaint. I’m not expecting anything will be reviewed on this issue, since nothing has been seen thus far for an actual fix via Nissan etc.
- Air bags
On January 25, 2024 my son was driving this truck and hit a dog on the highway. His driver side airbag deployed, the driver side seatbelt would not retract, and there was some minor body damage. The engine of the vehicle is fine and completely operational. Since then, we have been waiting for…
On January 25, 2024 my son was driving this truck and hit a dog on the highway. His driver side airbag deployed, the driver side seatbelt would not retract, and there was some minor body damage. The engine of the vehicle is fine and completely operational. Since then, we have been waiting for repairs to be made. Per USAA, repairs will be approx $5000 or less. The vehicle is worth over $12,000 so they decided to repair it. The problem is that part number 98820-ZP78A (air bag control module) is no longer being manufactured by Nissan. All other parts, including the *actual* air bag can still be purchased from Nissan, but they are not making the sensor we need to fix this vehicle. We are not the only ones who cannot obtain this part.
- Air bags
The contact owns a 2011 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that parts were not yet available. The contact stated that the…
The contact owns a 2011 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Unknown or other
Vehicle frame has failed due to rust.
- Structure › Body
Paint flaking off of front fender in crease above tire on both the passenger and driver side.
- Engine
2011 nissan frontier. Consumer writes in regard to illuminated check engne light.
- Engine and engine cooling › Engine › Engine control module (ecu/ecm) › Software
The contact owns a 2011 Nissan Frontier. The contact stated while driving 70 MPH, the vehicle was running rough. Additionally, the vehicle was shuddering violently and started to stall. The check engine warning light was illuminated. The contact depressed the accelerator pedal and drove to a local…
The contact owns a 2011 Nissan Frontier. The contact stated while driving 70 MPH, the vehicle was running rough. Additionally, the vehicle was shuddering violently and started to stall. The check engine warning light was illuminated. The contact depressed the accelerator pedal and drove to a local Pep Boys. The vehicle was not diagnosed or repaired. The vehicle was then towed to the dealer where it was diagnosed that the Engine Control Module (ECM) had failed and needed to be replaced; however, the part had been discontinued. The vehicle was not repaired. The manufacturer was notified of the failure but did not provide any assistance. The failure mileage was approximately 160,000.
- Service brakes
The Actuator Assembly - Anti Skid has failed on my 2011 Frontier. My vehicle has cluster lights illuminated for ABS, brake, VDC, and SLIP. My independent mechanic pulled the codes and stated that they indicate the ABS module is going bad. This part has been discontinued by Nissan so I am not able…
The Actuator Assembly - Anti Skid has failed on my 2011 Frontier. My vehicle has cluster lights illuminated for ABS, brake, VDC, and SLIP. My independent mechanic pulled the codes and stated that they indicate the ABS module is going bad. This part has been discontinued by Nissan so I am not able to replace the part with a new part. The ABS system will not properly function which I would assume would be a safety issue and might impact more than the braking performance of the vehicle.
- Service brakes
ABS module failed. The repair shop called the local Nissan dealership for parts. The Nissan dealership said the failure was a known issue. I called Nissan Customer Service for more info and they said no complaints had been filed.
- Engine and engine cooling › Engine › Gasoline
2011 nissan frontier. Consumer writes in regards to evaporation emmission control system. the consumer stated in order to fill the tank with gas, the gas spout must be held about 3 quarters of the way out of the filler neck. The consumer was concerned this would cause spilling or splashing. The…
2011 nissan frontier. Consumer writes in regards to evaporation emmission control system. the consumer stated in order to fill the tank with gas, the gas spout must be held about 3 quarters of the way out of the filler neck. The consumer was concerned this would cause spilling or splashing. The consumer stated at a particular gas station the gas nasal had a wide rubber gasket on the gas nozzle dispenser that covered the entrance to the gas tank.
- Air bags · Seat belts
My air bag light kept flashing on my 2011 Nissan Frontier Pro 4x4, I had it looked at when I got my oil changed and was told that it is a malfunction where you click the seat belt into, the light is off now but once some one sets in the passenger side seat and puts the seat belt on the light will…
My air bag light kept flashing on my 2011 Nissan Frontier Pro 4x4, I had it looked at when I got my oil changed and was told that it is a malfunction where you click the seat belt into, the light is off now but once some one sets in the passenger side seat and puts the seat belt on the light will come back on, due to malfunction in the seat belt, and if I would get into a accident and some one is sitting in the passenger side the seat belt will not properly secure them
- Air bags · Seats
My airbag light began to flash a year ago I took it to nissan they told me it was a seat cushion sensor it would cost me $500.00 to have it fixed. I am writting this in complaint that this has not been in recall I have waited for this period in expectation of receiving a recall notice. Also a…
My airbag light began to flash a year ago I took it to nissan they told me it was a seat cushion sensor it would cost me $500.00 to have it fixed. I am writting this in complaint that this has not been in recall I have waited for this period in expectation of receiving a recall notice. Also a failure code for belt tensioner. To have these items repaired would cost a total of $2175.14. I don't agree I should be responsible for the front passenger seat airbag sensor. No one sits in the seat, nothing should go wrong with the sensor. It came on all of a sudden. When starting the vehicle.
- Steering
TL* the contact owns 2011 nissan frontier. The contact stated that the power steering bracket detached while driving. The contact loss power steering functionality. The contact stated that the power steer belt shifted forward and detached the serpentine belt causing the vehicle to lose power…
TL* the contact owns 2011 nissan frontier. The contact stated that the power steering bracket detached while driving. The contact loss power steering functionality. The contact stated that the power steer belt shifted forward and detached the serpentine belt causing the vehicle to lose power steering. Several unknown warning lights illuminated when the belt detached. The vehicle was towed to an independent mechanic but was not diagnosed nor repaired. The contact called crown nissan of greenville (2712 laurens rd, greenville, sc 29607) and informed the dealer of the failure. The contact was informed that the bracket was discontinued and to schedule an appointment. The vehicle was not taken to a dealer due to the repair cost. The manufacturer was not made aware of the failure. The failure mileage was approximately 213,000.
- Electrical system · Visibility/wiper
Vehicle blower turns off after going through car wash, or intermittently while driving. Can cause issues with fogging up windows and visibility when driving when happening on freeway. Unsure as to nature of why. *tr
- Electronic stability control (esc) · Service brakes
While driving and attempting to stop at a stop sign the brakes became spongy (not firm) and pedal traveled to the floor resulting in longer braking distances unless I pump the pedal. This occurred after applying the brakes ahead of a stop sign as the vehicle rolled over a bump/irregularity in the…
While driving and attempting to stop at a stop sign the brakes became spongy (not firm) and pedal traveled to the floor resulting in longer braking distances unless I pump the pedal. This occurred after applying the brakes ahead of a stop sign as the vehicle rolled over a bump/irregularity in the road. The ABS and vdc (anti-slip) activated briefly then the pedal got soft. It remained in this condition (spongy and excessive pedal travel) until reached my destination. The first instance of this occurring the brake system seemed to correct itself with the vehicle parked and ignition off overnight (good pedal firmness and normal pedal travel and braking distances the next morning). However, after a second time this happened (brake gets soft after ABS and anti-slip activates) the spongy and long pedal travel remains. Replaced master cylinder and bled system (used motive power bleeder) did troubleshooting on brake booster, booster vacuum line and check valve and all checked fine. Inspected brake lines for bulges, damage and looseness at all calipers all ok. All pads and rotors checked good (no excessive wear or missing parts). Also, disconnected battery to see if the abs/vdc system resets. No change to brake pedal travel and spongy feel. Brake problems as described still remains.
- Engine
I bought this vehicle used and before delivery the dealership found oil leaks that they deemed a safety issue and they fixed at no charge. About a few days after delivery, I discovered that there was still a leak and scheduled an appointment with the dealership. They deemed this to not be a safety issue and refused to fix it at no charge. IS it their responsibility or mine?
- Air bags · Seat belts · Seats
I have repeatedly gotten indicators (via vehicle's computer) of air bag failure, on a vehicle of low mileage, which has never been in an accident, and has gotten failures regarding the front passenger seat, which IS rarely used. the first time, the dealer replaced the seatback and airbag under…
I have repeatedly gotten indicators (via vehicle's computer) of air bag failure, on a vehicle of low mileage, which has never been in an accident, and has gotten failures regarding the front passenger seat, which IS rarely used. the first time, the dealer replaced the seatback and airbag under warranty. the second time the dealer replaced the seatbelt assembly. how, the 3RD time, they tell me that the same seat - cushion needs to be replaced, along with the airbag, and that I have to pay over $2,000 for this. each time I get this failure notification, my airbag IS disabled. So, it IS an ongoing issue. the air bag failure light keeps coming on randomly, not related to a driving incident.
- Air bags
TL* the contact owns a 2011 nissan frontier. While driving approximately 35 mph around a curve, the contact's vehicle was rear ended by another vehicle. The contact's vehicle crashed into a corner post on a farm. The contact stated that the impact moved the post a couple of inches into the farm.…
TL* the contact owns a 2011 nissan frontier. While driving approximately 35 mph around a curve, the contact's vehicle was rear ended by another vehicle. The contact's vehicle crashed into a corner post on a farm. The contact stated that the impact moved the post a couple of inches into the farm. Only the side air bags deployed. The air bag indicator illuminated. The contact sustained some cuts, bruises, and soreness to his entire body. The contact was unconscious briefly and sustained a concussion. The contact was taken to the emergency room by the farm owner. A police report was filed. The vehicle was damaged and deemed totaled due to the side air bags. The vehicle was driven to the contact's residence. The contact repurchased the vehicle from the insurance company. The contact called ada nissan at 580-332-2233 (located at 420 lonnie abbott blvd, ada, ok 74820) and was informed that they were not interested in the matter. The manufacturer was not made aware of the failure. The failure mileage was approximately 30,000. The vin was unknown.
- Power train
Truck started not engaging in reverse at around 50,100 miles. Took my truck to larry h miller nissan where I paid 157.00 to have them tell me that my transmission was over full. they pulled about 3 liters of extra fluid from tranny. The fluid appears darker but thinner than normal. They said the…
Truck started not engaging in reverse at around 50,100 miles. Took my truck to larry h miller nissan where I paid 157.00 to have them tell me that my transmission was over full. they pulled about 3 liters of extra fluid from tranny. The fluid appears darker but thinner than normal. They said the pump IS probably blown due to excessive pressure from the added fluid. this transmission has never had service of fluid added. no sure at this point if this IS a problem with radiator cross contamination but about 3 yeas ago my heater stopped working. I checked my radiator to find it several quarts low. I'm not sure I want to spend any more money with anyone, especially nissan, to have this looked further into, but I would bed that it IS a cross contamination issue.
- Unknown or other
Leaf spring
- Power train
At 27,000 miles the clutch started slipping. The vehicle was in motion on I-5 freeway. The problem caused me to pull over and get off the road as the vehicle could not go at the speed of the traffic creating danger. The next day I took it to a repair shop where the clutch and the flywheel were replaced.
- Steering · Unknown or other
The horn on these truck have stop working this IS my second 2011 nissan frontier truck that same thing happens the horn just stops working and with houston, texas traffic we need a working horn in our vehicles.
- Air bags
Passenger-side airbag indicator light "yellow dashboard light" that typically comes on when anyone sits in the passenger seat. (anytime at any location) also the red airbag warning light on dashboard. dealer states it will cost $2400 to repair. other models of nissan vehicles with the same problem are covered by a recall, not 2011 frontier p/u. the problem seems to be the occupant classification sensor.
- Service brakes
Vdc off/ slip light are coming on and off. I pushed the vsc button and it stays. Its full of fluid. ID just like to have a tech look at them, ive heard of this happening to other people on different frontier forums.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007001VOLUNTARY SAFETY RECALL CAMPAIGN 2005-2013 FRONTIER, PATHFINDER, AND XTERRA; DRIVER AIR BAG COVER CAMPAIGN ID #: PC945 and PC948 APPLIED VEHICLES: 2005-2013 Frontier (D40) 2005-2012 Pathfinder (R51) 2005-2013 Xterra (N50) Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility. INTRODUCTION Nissan is conducting this voluntary safety recall campaign on certain specific model year 2005-2012 Pathfinder, and 2005-2013 Frontier and Xterra vehicles to inspect and, if necessary, replace the Driver Air Bag Cover. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC945 and PC948 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealers responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealers inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
- 11004962VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004961CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004960CAN COMMUNICATION CODES DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001201WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001194REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001191WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
- 1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
- 10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
- 10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10235698HEADLAMP, FOG LAMP, OR REAR COMBINATION LAMP FOGGING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10233896ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208953DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208950MIL ON WITH DTC P0448 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208946CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10207861MIL ON WITH DTC P0448 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192840SERVICE INFORMATION Temporary tire Flat Spotting is common on New Dealer In-Stock vehicles that have not been occasionally moved. Flat Spotting can occur after the vehicle has been parked (not moved) for a few days, or longer. In most cases it is temporary. In extreme cases it can be permanent. Vehicles should be moved every 30 days, in one direction only, enough to rotate the tires 90 (see Figure 1). Moving vehicles as shown will prevent tire Flat Spotting. See this bulletin for further detail.
- 10192821SERVICE INFORMATION Replacement 5-speed rear wheel drive Automatic Transmission (A/T) assemblies and replacement control valves (valve bodies) now come with blank Transmission Control Modules (TCMs). Blank TCMs come without software and must be programmed (not reprogrammed) and then configured after they are installed. When ordering a replacement A/T or control valve, use the Nissan electronic parts information systems to obtain the correct software program part number See this bulletin for further detail.
- 10192805IF YOU CONFIRM A refrigerant leak at a refrigerant pipe/hose joint location. ACTIONS 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. NOTE: Do not replace a refrigerant pipe, hose, or other A/C component if an o-ring seal will solve the leak incident, if it should occur. 2. If no damage is found to the joint metal surfaces, replace the O-ring seal. See this bulletin for further detail.
- 10192801SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. See this bulletin for further detail.
- 10192750SERVICE INFORMATION Occasionally customers may notice water vapor or fog in the headlamps. The information, illustrations, and flow chart in this bulletin are provided to help you in determining if an incident for water/condensation in the headlamps is normal or not. Nissan?s new vehicle limited warranty does not cover physically damaged (cracked or broken) headlamps. All current headlamp assemblies are vented to the atmosphere (not sealed). - This is necessary to allow for expansion and contraction of air from temperature "variations" (warmer or colder) without damage to the headlamp. - Moisture in the air sometimes "travels" into and out of the headlamp assembly through these vents. - Certain environmental conditions may cause moisture to condense. - The fogging/cloudiness should disappear over time when the headlamp is in a dry environment. See this bulletin for further detail.
- 10192740IF YOU CONFIRM: The MIL is ON with DTC P0448 (EVAP canister vent control valve close) stored in the ECM. ACTION: 1. Replace the EVAP canister (canister) and EVAP canister vent control valve (vent control valve). 2. Remove the canister filter. 3. Attach the EPT foam seal to fuel filler tube. 4. Replace the fuel filler pipe, canister drain hose, and fuel filler cap (on some model years) listed in PARTS INFORMATION. 5. Erase the DTC. See this bulletin for further detail.
- 10192727SERVICE INFORMATION The purpose of this bulletin is to give Nissan dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due to improper installation or damage to the glass during vehicle assembly. NNA typically does not find any type of cracks in the windshield due to stress after the dealership PDI. See this bulletin for further detail.
- 10192687SERVICE INFORMATION Design and process changes have been made to improve battery voltage at dealer receipt. Our goal is to deliver vehicles to customers with a 12 volt battery in excellent condition. Proper dealership storage and maintenance of vehicle 12 volt batteries is essential to insuring good battery operating life and customer satisfaction. Dealers are responsible for maintaining vehicles in their inventory. 12 volt batteries in vehicle inventory should always be kept at a full charge to prevent excessive discharge during storage and so they are ready for delivery to customers at any time. See this bulletin for further detail.
- 10192679SERVICE INFORMATION Power moonroof initialization procedures for the Applied Vehicles have been revised. The procedure described in this bulletin differs from the procedure in the Electronic Service Manual (ESM). At a later date and where possible, the applicable ESMs will be updated with the revised procedures. Follow the procedure in this bulletin should the power moonroof in an Applied Vehicle need to be initialized. See this bulletin for further details.
- 10192677SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulletin for further details.
- 10192650IF YOU CONFIRM The customer states HomeLink will not operate or has improper operation. ACTIONS 1. To significantly reduce unnecessary repairs, make sure: a. The vehicle is not in "Transit Mode" (if equipped). - Not in Transit Mode: With the turn signal switch is in the OFF (center) position, turn the ignition from OFF to ON. If the turn signal indicators stay OFF (do not illuminate), the vehicle is not in Transit Mode. b. The "Extended Storage Switch" (if equipped) is in the "Customer Delivery" position (pushed in). - The Extended Storage Switch is located on the fuse block that is located in the interior of the vehicle. 2. Confirm the customer is familiar with the HomeLink programming procedure located in the vehicle?s owner?s manual. 3. Test HomeLink operation with special tool HomeLink Transmitter Tester J-41540. See this bulletin for further detail.
- 10192638SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
- 10192597SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when improperly dismounting and mounting tires. - TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty. - To avoid such damage, ensure that the tire changer being used and the operator of the tire changer is capable of servicing run flat and low profile tires. - Operator?s manuals for such tire changers must be followed. See this bulletin for further detail.
- 10192591SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming. See this bulletin for further detail.
- 10192574SERVICE INFORMATION The appearance of painted alloy wheels can be damaged if acidic cleaners are used. DO NOT use Chrome Wheel Cleaner on Painted Wheels. Many chrome wheel cleaners have acidic ingredients. Make sure to follow all instruction in the Appearance and Care Section of the Owner?s Manual. Damage to wheel appearance due to the use of inappropriate chemicals or cleaning products is not covered under warranty. See this bulletin for further detail.
- 10192562SERVICE INFORMATION The applied vehicles are equipped with automatic door locks that lock all doors when the vehicle speed reaches 15 MPH. There is no instruction in the Owner?s Manual on auto-lock function deactivation. All doors unlock automatically when the ignition is placed in the OFF position (models with Intelligent Key system) or when the key is removed from the ignition switch (models without Intelligent Key system). The auto-unlock function can be deactivated by the driver in accordance with Owner?s Manual Instructions. Please see this bulletin for further details.
- 10192532SERVICE INFORMATION NOTE - Failure to follow the procedures in this bulletin may result in the denial of a warranty claim. In an effort to protect the paint finish, Paint Guard Film (PGF) is applied on many new Nissan vehicles. Paint Guard Film is a temporary white plastic protective film that is applied by the factory to the horizontal painted surfaces of the vehicle. The PGF protects the paint finish during vehicle handling, transportation and storage from harmful elements such as acid rain, iron particles, bird droppings, tree sap and other environmental contaminants. NOTE - Paint Guard Film CANNOT remain on the vehicle for more than six months after the vehicle's manufacture date. PGF must be removed at the end of six months. See this bulletin for further detail.
Every Nissan Frontier model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.