2012 Nissan Frontier
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Nissan › Frontier › 2012
These records cover every 2012 Nissan Frontier. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2012 Nissan Frontier. Newest first.
Nissan North America, Inc. (Nissan) is recalling certain model year 2012 through 2014 Frontier vehicles manufactured from November 28, 2012, through December 17, 2013. In the affected vehicles, a circuit breaker may have been installed incorrectly causing the main wire harness connected to the circuit breaker to face outward, potentially contacting a metal…
Risk and remedy
Risk
The bolt may wear through the wire harness covering, resulting in an electrical short which could cause a fire.
Remedy
Nissan will notify owners, and dealers will inspect the circuit breaker orientation. If the circuit breaker orientation is incorrect, dealers will repair the vehicles free of charge. The recall began on March 17, 2014. Owners may contact Nissan at 1-800-647-7261.
Nissan is recalling certain model year 2012 Frontier, Pathfinder, and Xterra two-wheel drive vehicles manufactured from June 19, 2012, through July 12, 2012. These vehicles may have been equipped with front wheel hubs that may not meet the design hardness specifications. A wheel hub that was manufactured below hardness specification may wear prematurely…
Risk and remedy
Risk
If the vehicle is driven in this condition, the wheel hub may break, possibly resulting in a vehicle crash.
Remedy
Nissan will notify owners, and dealers will replaced the left and right side front wheel hub assemblies free of charge. The safety recall began on October 22, 2012. Owners may contact Nissan Customer Service at 1-800-647-7261.
Nissan IS recalling certain model year 2011 infiniti FX, model year 2012 infiniti m, model year 2011-2012 nissan frontier, model year 2011-2012 nissan xterra, model year 2011-2012 nissan pathfinder, and model year 2012 nissan NV vehicles. some of the bolts that connect the engine oil cooler and the engine oil filter to the engine in these vehicles may have…
Risk and remedy
Risk
If there IS an engine oil leak, the engine oil pressure would drop and the engine could seize, increasing the risk of a crash.
Remedy
Nissan will notify owners, and dealers will replace the connector bolts free of charge. the safety recall began on january 30, 2012. owners may contact nissan at 1-800-647-7261.
Owner complaints
80 complaints4 involved a crash8 injuries
What owners report most
Latest complaints
- Tires
Please see attachment below
- Electrical system · Engine
1. Frequent repeated multiple breakdown and damages to all and any MAF sensors, camshaft position sensors bank 2, VVT solenoid sensors as cause of short circuited and fire hazard high risk of IPDM and main loom wiring harnesses from careless, dangerous severe defective…
1. Frequent repeated multiple breakdown and damages to all and any MAF sensors, camshaft position sensors bank 2, VVT solenoid sensors as cause of short circuited and fire hazard high risk of IPDM and main loom wiring harnesses from careless, dangerous severe defective workmanship/installation/mounting of metal bolt and loom wiring together by the A-frame on passenger side, below glove box, on side wall/fender close to passenger door. It appears the factory and Nissan installed backward circuit breaker also. The thick black wire (possibly power wire) and loom harness wiring are rubbing into each other causing possible big hole on the wire/loom insulation resulting to overheating of wire and short circuiting all or most wiring/loom harnesses of entire engine and engine bay. 2. The dangerous rubbing of wire and bolt is extremely dangerous fire risk/hazard also endangering lives of vehicle occupants and commuters on the road and posing danger to the public and city/State infrastructures. 3. Already reported/notified both Nissan Consumer Affairs and local Nissan Dealer on 10/6/2026 and both of them malicously refused and declined to recognize the defect, issue, risk, danger, problem. And they also refused to perform necessary repair. 4. Manufacturer Nissan declined and refused to recognize and acknowledge the serious high danger and defective product and severely flawed manufacturing/mounting/assembly. Local police process unknown. 5. Engine sputtering and resulted to inoperative condition on October 2026. Multiple sensors on bank 2 damaged/failed all at once at the same time indicative of serious IPDM compromised/defect and short circuited wires/loom connected to multiple sensors. Short circuit tracing using tracing device and multimeters confirmed damaged and affected electrical wires as result of Nissan manufacturer creation of unsafe and dangerous product. We, all of us,should be resolving/rectifying major serious problems that pose danger to lives of public
- Structure › Body
I was sold the 2012 Nissan Frontier SL from Lynne's Nissan City in Bloomfield, NJ being told it was a safe vehicle and passed their inspection. After bringing it to my mechanic I was informed the frame was so rusted it was unsafe to drive. They are now trying to resell the vehicle not disclosing that information.
- Electrical system
CD player will not play any CD's and my CD's are stuck inside. The radio only works intermittently and you can hear a sound like there is an electrical connection problem somewhere. This problem started about 2 months ago. I am presently in Florida and have a long drive home back to…
CD player will not play any CD's and my CD's are stuck inside. The radio only works intermittently and you can hear a sound like there is an electrical connection problem somewhere. This problem started about 2 months ago. I am presently in Florida and have a long drive home back to Pennsylvania. My cellphone # is [XXX] and my email is [XXX] . My home address is as follows: [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Engine and engine cooling › Engine › Crank/camshaft position sensor
The contact owns a 2012 Nissan Frontier. The contact stated while driving at approximately 40 MPH, the vehicle stalled. The contact stated that the steering was difficult to turn. The contact stated that the check engine warning light was illuminated. The contact pulled over and stopped the…
The contact owns a 2012 Nissan Frontier. The contact stated while driving at approximately 40 MPH, the vehicle stalled. The contact stated that the steering was difficult to turn. The contact stated that the check engine warning light was illuminated. The contact pulled over and stopped the vehicle. The contact shifted into park(P); however, several attempts were needed to restart the vehicle. The contact had taken the vehicle to an independent mechanic who diagnosed the vehicle and determined that the cam shaft sensor needed to be replaced. The vehicle was repaired. The contact stated that the failure reoccurred and had the cam shaft sensor replaced again. Additionally, the contact stated that the ignition key was no longer working and turning the ignition switch. The contact then drove the vehicle to a local dealer, where it was diagnosed and determined that the cam shaft sensor needed to be replaced. The vehicle was repaired. The contact stated that the vehicle failure had reoccurred, and the vehicle was not taken back to the dealer. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 179,000.
- Air bags
We were told about the recall, never got a recall letter in the mail. When we went to Nissan, they said they couldn’t help us if only we had the recall letter.
- Seat belts
The contact owns a 2012 Nissan Frontier. The contact stated that while driving 40 MPH in cold weather with the seat belt connected, the seat belt warning light illuminated. The vehicle was taken to the local dealer, where it was diagnosed that the front passenger’s side seat belt assembly and the…
The contact owns a 2012 Nissan Frontier. The contact stated that while driving 40 MPH in cold weather with the seat belt connected, the seat belt warning light illuminated. The vehicle was taken to the local dealer, where it was diagnosed that the front passenger’s side seat belt assembly and the sensor needed to be replaced. The vehicle was not repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline. The approximate failure mileage was 89,333.
- Air bags
Took vehicle to dealership for recall. Air bag light on dashboard was flashing. Dealer said air bag was ok and they did not go any further to find the problem. The light is still flashing, so I do not know if my air bags are safely operative. Thank you very much.1031
- Air bags
The contact owns a 2012 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Air bags
The contact owns a 2012 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2012 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
- Air bags
The contact owns a 2012 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of…
The contact owns a 2012 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Air bags
The contact owns a 2012 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2012 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 23E012000 (Air Bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
- Air bags
Air bag warning light has appeared on a vehicle with less than 83,000 miles . No accident has occurred but ity IS of concern since other manufacturer models have had same problems and were repaired by dealer through manufacturer recall
- Air bags › Passenger side frontal › Cushion
The contact owns a 2012 Nisan Frontier. The contact stated that on multiple occasions while driving under 50 MPH, the supplemental air bag safety warning light remained illuminated. The VIN search confirmed that the vehicle has one open recall at this time NHTSA Campaign Number: 23E012000 (Air…
The contact owns a 2012 Nisan Frontier. The contact stated that on multiple occasions while driving under 50 MPH, the supplemental air bag safety warning light remained illuminated. The VIN search confirmed that the vehicle has one open recall at this time NHTSA Campaign Number: 23E012000 (Air Bags). The vehicle was taken to a dealer where it was diagnosed and determined that the passenger seat belt assembly pretensioner, and passenger’s side seat cushion needed to be replaced. The manufacturer was notified of the failure. The failure mileage was 71,000.
- Air bags
Involved in a auto accident on June 11 2021. Airbags deployed, however, little rock type projectiles also exploded from the airbag landing all over the car and passenger causing a risk to the eyes, face and other body parts. Has not been taken to the dealer, auto I believe is totaled. Photos sent…
Involved in a auto accident on June 11 2021. Airbags deployed, however, little rock type projectiles also exploded from the airbag landing all over the car and passenger causing a risk to the eyes, face and other body parts. Has not been taken to the dealer, auto I believe is totaled. Photos sent to adjuster along with photos of the car damage. No warnings. I have photos have the projectiles throughout the car and I have also collected a small sample in a zip bag.
- Unknown or other
The paint above the front wheel well on both the passenger and drivers side of my 2012 nissan frontier (blue) with 69,0000 miles IS pealing off in chunks. if do an internet search on 'paint flaking nissan frontier' you can see numerous pictures. talking with the dealer, prevalent issue on dark…
The paint above the front wheel well on both the passenger and drivers side of my 2012 nissan frontier (blue) with 69,0000 miles IS pealing off in chunks. if do an internet search on 'paint flaking nissan frontier' you can see numerous pictures. talking with the dealer, prevalent issue on dark colored frontiers (blue IS especially prevalent. clearly a factory defect as the paint IS not adhering to the primer. talked to nissan consumer support and they basically say it IS out of warranty so good luck with repair. clearly this IS a manufacturing defect that should not happen. not a safety issue, but poor customer support. has it been fixed? my expectation IS there should have been some cost share for this repair.
- Engine
TL* the contact owns a 2012 nissan frontier. The contact stated while driving 50 mph, the vehicle stalled without warning. The vehicle was taken to an independent mechanic where it was diagnosed with an unknown wire needing to be replaced. The contact stated that the wire was replaced however, the…
TL* the contact owns a 2012 nissan frontier. The contact stated while driving 50 mph, the vehicle stalled without warning. The vehicle was taken to an independent mechanic where it was diagnosed with an unknown wire needing to be replaced. The contact stated that the wire was replaced however, the failure recurred. The failure persisted and the vehicle was taken back to the independent mechanic. The vehicle was not repaired. The manufacturer had been informed of the failure. The contact was informed that there would be no assistance provided since the vehicle was not financed through an authorized nissan dealer. The failure mileage was approximately 28,000.*dt consumer stated there is more accurate statement on bbb complaint form complete.
- Engine
TL* the contact owns a 2012 nissan frontier. The contact stated that while driving up a mountain at 30 mph, the vehicle stalled with the check engine light illuminated. The vehicle failed to restart and was towed to napa nissan (510 soscol ave, napa, ca 94559) where the mechanic replaced two…
TL* the contact owns a 2012 nissan frontier. The contact stated that while driving up a mountain at 30 mph, the vehicle stalled with the check engine light illuminated. The vehicle failed to restart and was towed to napa nissan (510 soscol ave, napa, ca 94559) where the mechanic replaced two camshaft positioning sensors. The contact stated that the same camshaft sensors were replaced two additional times by the same dealer for the same failure. The manufacturer had not been notified of the failure. The vehicle was not repaired. The failure mileage was 136,291.
- Structure › Frame and members
TL* the contact owns a 2012 nissan frontier. The contact stated there was a hole in the floorboard underneath the driver's seat caused by extreme corrosion. The vehicle was not taken to be inspected nor repaired. A dealer was not contacted. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered under warranty. The failure mileage was 93,000.
- Engine · Unknown or other · Vehicle speed control
The vehicle would randomly stall while driving, particularly when slowing for a traffic signal. The engine stopping would cause all power assisted functions to cease making it difficult to steer and brake. Most recently the vehicle would start extreme hesitation while driving and I could not get up…
The vehicle would randomly stall while driving, particularly when slowing for a traffic signal. The engine stopping would cause all power assisted functions to cease making it difficult to steer and brake. Most recently the vehicle would start extreme hesitation while driving and I could not get up to the posted speed limit of 55 mph. I had to use my flashers to warn other drivers that my speed was only approximately 35 mph. also the transmission had difficulty shifting. this was extremely dangerous on a 2 lane highway where vehicles rapidly approached from the rear. It wouldn't negotiate a large hii (lack of power) and I had to have it towed to my home. Receipt below. *tr
- Power train
TL* the contact called on behalf of his son who owns a 2012 nissan frontier. The contact stated that while driving at various speeds, the vehicle would shuddered without warning. The vehicle resumed normal operation after experiencing the failure. The vehicle was taken to metro nissan of montclair…
TL* the contact called on behalf of his son who owns a 2012 nissan frontier. The contact stated that while driving at various speeds, the vehicle would shuddered without warning. The vehicle resumed normal operation after experiencing the failure. The vehicle was taken to metro nissan of montclair 9440 autoplex st, montclair, ca 91763, but was not diagnosed nor repaired. The manufacturer was notified of the failure. The failure mileage was approximately 63,000.
- Vehicle speed control
TL* the contact owns a 2012 nissan frontier. While reversing out of a parking lot, the vehicle accelerated on its own. Also, while at a stop with the brake pedal depressed, the vehicle accelerated without warning. The failure recurred several times. The vehicle was taken to an independent mechanic…
TL* the contact owns a 2012 nissan frontier. While reversing out of a parking lot, the vehicle accelerated on its own. Also, while at a stop with the brake pedal depressed, the vehicle accelerated without warning. The failure recurred several times. The vehicle was taken to an independent mechanic to be diagnosed, but no failure code was found. The dealer and manufacturer were not made aware of the failure. The vehicle was not repaired. The failure mileage was approximately 120,000.
- Structure › Body
While hosing down the truck the paint on my front fenders started to peel in large chunks on the drivers side. According to the dealership it should not be peeling.
- Engine
My truck has had what feels to me like a rough idle for about as long as I've had it. it was fine for several years but a couple of months ago the truck died at a stop light. it started right back up and I didn't think I'D be able to replicate this for a mechanic so I just kept driving it. it…
My truck has had what feels to me like a rough idle for about as long as I've had it. it was fine for several years but a couple of months ago the truck died at a stop light. it started right back up and I didn't think I'D be able to replicate this for a mechanic so I just kept driving it. it also died once on my wife but she didn't tell me about it at the time. a couple of weeks ago I was driving on the highway at lower speeds due to traffic. it died on me again and this time it wouldn't start. I had to have it towed to a nissan dealer. they repaired a part in the transmission and gave it back to me. it seemed ok but after about ten miles it died again. I brought it back and they said they couldn't find anything wrong with it. They cleaned the throttle body and gave it back to me. it IS still idling rough. it hasn't died again yet but I'm afraid of what might happen if it does. I've looked online and this IS a common problem with these trucks. I think it has some defect that needs to be addressed through a recall for the safety of drivers on the road.
- Structure › Body
Called nissan a couple of times regarding defamation of paint in 2012 frontiers and my front fenders are peeling in large chunks just as several other 2012 blue nissan frontiers
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007001VOLUNTARY SAFETY RECALL CAMPAIGN 2005-2013 FRONTIER, PATHFINDER, AND XTERRA; DRIVER AIR BAG COVER CAMPAIGN ID #: PC945 and PC948 APPLIED VEHICLES: 2005-2013 Frontier (D40) 2005-2012 Pathfinder (R51) 2005-2013 Xterra (N50) Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility. INTRODUCTION Nissan is conducting this voluntary safety recall campaign on certain specific model year 2005-2012 Pathfinder, and 2005-2013 Frontier and Xterra vehicles to inspect and, if necessary, replace the Driver Air Bag Cover. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC945 and PC948 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealers responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealers inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
- 11004962VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004961CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004960CAN COMMUNICATION CODES DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001201WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001194REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001191WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
- 1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
- 10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
- 10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10235698HEADLAMP, FOG LAMP, OR REAR COMBINATION LAMP FOGGING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10233896ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208953DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208950MIL ON WITH DTC P0448 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208948EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208946CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10207861MIL ON WITH DTC P0448 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192840SERVICE INFORMATION Temporary tire Flat Spotting is common on New Dealer In-Stock vehicles that have not been occasionally moved. Flat Spotting can occur after the vehicle has been parked (not moved) for a few days, or longer. In most cases it is temporary. In extreme cases it can be permanent. Vehicles should be moved every 30 days, in one direction only, enough to rotate the tires 90 (see Figure 1). Moving vehicles as shown will prevent tire Flat Spotting. See this bulletin for further detail.
- 10192821SERVICE INFORMATION Replacement 5-speed rear wheel drive Automatic Transmission (A/T) assemblies and replacement control valves (valve bodies) now come with blank Transmission Control Modules (TCMs). Blank TCMs come without software and must be programmed (not reprogrammed) and then configured after they are installed. When ordering a replacement A/T or control valve, use the Nissan electronic parts information systems to obtain the correct software program part number See this bulletin for further detail.
- 10192801SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. See this bulletin for further detail.
- 10192787SERVICE INFORMATION If the clip for the fuel filler cap tether becomes lost or is detached for any reason, it is no longer necessary to replace the fuel filler cap. The clip or "pin" is now available as a separate service part. NOTE - Do not replace the fuel filler cap if only the pin is needed. See this bulletin for further detail.
- 10192750SERVICE INFORMATION Occasionally customers may notice water vapor or fog in the headlamps. The information, illustrations, and flow chart in this bulletin are provided to help you in determining if an incident for water/condensation in the headlamps is normal or not. Nissan?s new vehicle limited warranty does not cover physically damaged (cracked or broken) headlamps. All current headlamp assemblies are vented to the atmosphere (not sealed). - This is necessary to allow for expansion and contraction of air from temperature "variations" (warmer or colder) without damage to the headlamp. - Moisture in the air sometimes "travels" into and out of the headlamp assembly through these vents. - Certain environmental conditions may cause moisture to condense. - The fogging/cloudiness should disappear over time when the headlamp is in a dry environment. See this bulletin for further detail.
- 10192740IF YOU CONFIRM: The MIL is ON with DTC P0448 (EVAP canister vent control valve close) stored in the ECM. ACTION: 1. Replace the EVAP canister (canister) and EVAP canister vent control valve (vent control valve). 2. Remove the canister filter. 3. Attach the EPT foam seal to fuel filler tube. 4. Replace the fuel filler pipe, canister drain hose, and fuel filler cap (on some model years) listed in PARTS INFORMATION. 5. Erase the DTC. See this bulletin for further detail.
- 10192727SERVICE INFORMATION The purpose of this bulletin is to give Nissan dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due to improper installation or damage to the glass during vehicle assembly. NNA typically does not find any type of cracks in the windshield due to stress after the dealership PDI. See this bulletin for further detail.
- 10192687SERVICE INFORMATION Design and process changes have been made to improve battery voltage at dealer receipt. Our goal is to deliver vehicles to customers with a 12 volt battery in excellent condition. Proper dealership storage and maintenance of vehicle 12 volt batteries is essential to insuring good battery operating life and customer satisfaction. Dealers are responsible for maintaining vehicles in their inventory. 12 volt batteries in vehicle inventory should always be kept at a full charge to prevent excessive discharge during storage and so they are ready for delivery to customers at any time. See this bulletin for further detail.
- 10192679SERVICE INFORMATION Power moonroof initialization procedures for the Applied Vehicles have been revised. The procedure described in this bulletin differs from the procedure in the Electronic Service Manual (ESM). At a later date and where possible, the applicable ESMs will be updated with the revised procedures. Follow the procedure in this bulletin should the power moonroof in an Applied Vehicle need to be initialized. See this bulletin for further details.
- 10192677SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulletin for further details.
- 10192650IF YOU CONFIRM The customer states HomeLink will not operate or has improper operation. ACTIONS 1. To significantly reduce unnecessary repairs, make sure: a. The vehicle is not in "Transit Mode" (if equipped). - Not in Transit Mode: With the turn signal switch is in the OFF (center) position, turn the ignition from OFF to ON. If the turn signal indicators stay OFF (do not illuminate), the vehicle is not in Transit Mode. b. The "Extended Storage Switch" (if equipped) is in the "Customer Delivery" position (pushed in). - The Extended Storage Switch is located on the fuse block that is located in the interior of the vehicle. 2. Confirm the customer is familiar with the HomeLink programming procedure located in the vehicle?s owner?s manual. 3. Test HomeLink operation with special tool HomeLink Transmitter Tester J-41540. See this bulletin for further detail.
- 10192638SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
- 10192615SERVICE INFORMATION The information in this bulletin is provided to help ensure correct diagnosis and repair of fluid leaks. All fluid leaks, when properly diagnosed, should be repaired (whether under warranty or customer pay) to ensure proper vehicle operation. However, certain normal operating conditions can be misdiagnosed as a leak requiring repair. Unnecessary repair or replacement of parts in connection with incorrectly diagnosed "leaks" can negatively impact customer satisfaction, be time consuming and costly, and if not performed correctly can lead to future repairs. See this bulletin for further detail.
- 10192597SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when improperly dismounting and mounting tires. - TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty. - To avoid such damage, ensure that the tire changer being used and the operator of the tire changer is capable of servicing run flat and low profile tires. - Operator?s manuals for such tire changers must be followed. See this bulletin for further detail.
- 10192591SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming. See this bulletin for further detail.
- 10192574SERVICE INFORMATION The appearance of painted alloy wheels can be damaged if acidic cleaners are used. DO NOT use Chrome Wheel Cleaner on Painted Wheels. Many chrome wheel cleaners have acidic ingredients. Make sure to follow all instruction in the Appearance and Care Section of the Owner?s Manual. Damage to wheel appearance due to the use of inappropriate chemicals or cleaning products is not covered under warranty. See this bulletin for further detail.
Every Nissan Frontier model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.