2013 RAM 2500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2013 RAM 2500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
16 recalls name the 2013 RAM 2500. Newest first.
Chrysler (FCA US LLC) is recalling certain 2015-2017 Ram 1500, 2500 and 3500 pickup trucks equipped with an 8 foot bed and a power locking tailgate. Chrysler is also recalling all 2013-2014 and 2018 Ram 1500, 2500 and 3500 pickup trucks built before April 1, 2018 with a 6 or 8 foot bed and a power locking tailgate. On August 29, 2019 Chrysler expanded the…
Risk and remedy
Risk
If the tailgate opens while the vehicle is being driven, cargo may fall out the vehicle and create a road hazard, increasing the risk of crash.
Remedy
Chrysler will notify owners, and dealers will repair the tailgate latch, free of charge. The recall began May 23, 2019. Chrysler is expected to notify owners of the expanded population on October 18, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's number for this recall is V44. Note: 2015-2017 MY Ram 1500 pickup trucks with truck beds other than 8 foot, are currently covered under NHTSA recall 18V-486 for this issue.
Streetcar ORV LLC (Streetcar) is recalling certain American Expedition Vehicles (AEV) 3" Dualsport aftermarket suspension kits, part numbers N0436000 and N0436001, sold for installation on 2013-2018 RAM 2500 and 3500HD trucks. Improper installation and machining of the original equipment steering knuckle may weaken the joint between the steering drag link…
Risk and remedy
Risk
The weakened connection may result in a fractured steering drag link, causing a loss of steering and increasing the risk of a crash.
Remedy
Streetcar will notify owners and dealers will inspect and install a new steering knuckle, free of charge. The recall began December 3, 2018. Owners may contact AEV customer service at 1-248-926-0256, extension 500.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from…
Risk and remedy
Risk
If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy
Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the…
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2013-2017 RAM 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, equipped with Cummins 6.7L Turbo Diesel engines that have Concentric-brand water pumps without a vent hole. These water pumps may leak coolant.
Risk and remedy
Risk
The leaking water pump can increase the risk of an engine compartment fire.
Remedy
Chrysler will notify owners, and dealers will replace the water pumps, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T51.
Streetcar ORV LLC, dba American Expedition Vehicles (AEV) is recalling certain 2013-2017 RAM 2500 and 3500 heavy duty trucks, modified by AEV to be equipped with cast aluminum Katla 8.5" road wheels. The outer surface of the wheel may fracture, resulting in rapid air loss.
Risk and remedy
Risk
If the wheel fractures, a loss of vehicle control can occur, increasing the risk of a crash.
Remedy
AEV will notify owners, and dealers will replace the wheels with wheels of similar value, free of charge. The recall began on August 30, 2017. Owners may contact AEV customer service at 1-248-926-0256 extension 500.
Chrysler (FCA US LLC) is recalling certain model year 2013-2016 Ram 1500, Ram 2500, and 2014-2016 Ram 3500 vehicles. Certain driving conditions, such as driving off-road or debris striking the vehicle may cause the roll rate sensor to trigger a fault within the Occupant Restraint Controller (ORC). If this fault occurs, the rollover side curtain air bag…
Risk and remedy
Risk
If the rollover side curtain air bags and seat belt pretensioners are disabled, there is an increased risk of injury to the vehicle occupants in the event of a crash that necessitates activation of these safety systems.
Remedy
Chrysler will notify owners, and dealers will update the ORC software, free of charge. The recall began June 26, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T25.
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger Police vehicles, 2007-2013 RAM 3500 Cab Chassis, 2008-2013 RAM 4500 and 5500 Cab Chassis, and 2013 RAM 2500 and 3500 vehicles. The affected vehicles have a 220 amp alternator that may suddenly fail.
Risk and remedy
Risk
If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash. There is also the possibility that the alternator may short circuit, increasing the risk of a fire.
Remedy
Chrysler will notify owners, and dealers will replace the alternator with a revised alternator, free of charge. The recall began on December 23, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S68.
Chrysler (FCA US LLC) is recalling aftermarket Mopar Canvas Seat Covers for certain 2012-2016 RAM 1500, 2500, and 3500 trucks. These Mopar canvas seat covers were sold through Chrysler dealerships beginning October 15, 2015. The seat covers can impede the deployment of the seat thorax airbags.
Risk and remedy
Risk
If the seat cover impedes the air bag deployment, the seat thorax air bags may not provide adequate protection in the event of a crash, increasing the risk of a injury.
Remedy
Chrysler will notify owners to remove the front seat covers and return them for a full refund. The recall began on July 1, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S30.
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Ram 1500, 2500, 3500, 4500, and 5500, 2015 Chrysler 200, Chrysler 300, Dodge Charger, and Dodge Challenger, 2014-2015 Jeep Grand Cherokee, Cherokee, and Dodge Durango, and 2013-2015 Dodge Viper vehicles. The affected vehicles are equipped with radios that have software vulnerabilities that can…
Risk and remedy
Risk
Exploitation of the software vulnerability may result in unauthorized remote modification and control of certain vehicle systems, increasing the risk of a crash.
Remedy
Chrysler will notify and mail affected owners a USB drive that includes a software update that eliminates the vulnerability, free of charge. Optionally, owners may download the update to their own USB drive from http://www.driveuconnect.com/software-update/ or take their vehicle to a Chrysler dealer for immediate installation. In an effort to mitigate the effects of this security vulnerability, Chrysler has had the wireless service provider close the open cellular connection to the vehicle that provided unauthorized access to the vehicle network. This measure may not have been implemented on all vehicles and does not address access by other means that will be remedied by the software update. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R40.
Chrysler (FCA US LLC) is recalling certain model year 2012-2014 Ram 1500, 2500, 3500, 4500, and 5500 trucks manufactured January 18, 2011, to October 7, 2014, and equipped with the Electronic Vehicle Information Center option. The affected vehicles have a steering wheel wiring harness that may rub against the driver air bag module retainer spring.
Risk and remedy
Risk
This abrasion may result in an electrical short that could cause driver's frontal air bag to unexpectedly deploy. Inadvertent deployment of the air bag may increase the risk of injury and the possibility of a vehicle crash.
Remedy
Chrysler will notify owners, and dealers will inspect, repair as necessary, and secure the steering wheel wiring harness. Additionally, protective caps will be added to the air bag retainer spring ends. These repairs will be done free of charge. The recall began on September 18, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R36.
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Ram 1500, 2500, and 3500 trucks manufactured June 20, 2012, to January 26, 2015. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt…
Risk and remedy
Risk
Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy
Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on September 8, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R23.
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Risk and remedy
Risk
If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy
Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Chrysler is recalling certain model year 2013 Ram 1500, 2500, and 3500 trucks manufactured September 9, 2012, through March 5, 2013 and equipped with optional premium tail lamps. In the affected vehicles, the turn signal indicator may not flash at a double rate to give a notification to the driver of a turn signal malfunction. Thus, these vehicles fail to…
Risk and remedy
Risk
Without a warning that the turn signal is malfunctioning, the driver would continue to use the vehicle, unaware that other drivers on the road are not being notified that the vehicle is turning, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will reprogram the Central Body Controller software, free of charge. The recall began June 27, 2013. Owners may contact Chrysler at 1-800-853-1403. Chrysler's recall campaign number is N35.
Chrysler is recalling certain model year 2013 Ram 2500 and 3500 trucks manufactured January 7, 2013, through February 28, 2013 and equipped with optional premium headlamps. The headlamp shutters may function improperly when in high-beam mode. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 108…
Risk and remedy
Risk
Improper headlight shutter function during high beam use may reduce the drivers visibility and possibly blind oncoming traffic. Either condition may increase the risk of crash.
Remedy
Chrysler will notify owners, and dealers will reconfigure the Central Body Controller, free of charge. The recall began July 30, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N33.
Chrysler Group LLC (Chrysler) is recalling certain model year 2013 Dodge Ram 2500 and 3500 trucks manufactured January 7, 2013, through March 6, 2013. The engine cover may trap an excessive amount of heat under the cover.
Risk and remedy
Risk
The excessive heat under the engine cover may result in an under hood fire.
Remedy
Chrysler will notify owners, and dealers will replace the existing engine cover with one that is a different design, free of charge. An interim letter was mailed on May 31, 2013. A second letter was mailed to owners with instructions on how to obtain the free remedy on August 15, 2013. Owners may contact Chrysler at 1-800-853-1403. Chrysler's recall campaign number is N19.
Owner complaints
178 complaints7 involved a crash7 involved a fire4 injuries
What owners report most
Latest complaints
- Unknown or other
The ABS module is not working. Part # 68052421AF is part of a recall # C4B but not for my truck. The VIN states it's been reprogrammed. What can I do?
- Engine
Jan 8 th had Ram 67A recall performed. Feb1 the EL on dash comes on and def system engine shutdown countdown. Feb 4 brought truck to dealer for service fix. Feb 5 dealer states that truck needs new DEF injector, Wiring harness , and SCR .and covered under the 67A recall warranty. Dealer states…
Jan 8 th had Ram 67A recall performed. Feb1 the EL on dash comes on and def system engine shutdown countdown. Feb 4 brought truck to dealer for service fix. Feb 5 dealer states that truck needs new DEF injector, Wiring harness , and SCR .and covered under the 67A recall warranty. Dealer states truck will be ready Feb 11. Feb 11 dealer states parts part out for devilery status but delayed with no eta on delivery date. Called dealer for status with same parts not available reply from dealer on Feb 11,17,18,23,24 March 2, 4 . Truck had been immobile at dealership for over 30 days and no delivery date available after 67A recall issues.
- Engine · Power train
Over time the transmission cooling line to the radiator was rubbing against another part in the engine compartment resulting in a hole in the line and eventually catastrophic failure of the line. This caused transmission fluid to be sprayed around the engine compartment and the roadway creating an…
Over time the transmission cooling line to the radiator was rubbing against another part in the engine compartment resulting in a hole in the line and eventually catastrophic failure of the line. This caused transmission fluid to be sprayed around the engine compartment and the roadway creating an environmental issue. This could cause loss of power, fire and damage to the environment. Online other users of same make model and year have reported the same issue.
- Power train
The contact owns a 2013 Ram 2500. The contact stated while the vehicle was turned off and in park(P), the vehicle shifted into reverse after the contact’s son bumped into the column shifter. As a result, the vehicle rolled down hill coming to a complete stop after striking a fence post. The air…
The contact owns a 2013 Ram 2500. The contact stated while the vehicle was turned off and in park(P), the vehicle shifted into reverse after the contact’s son bumped into the column shifter. As a result, the vehicle rolled down hill coming to a complete stop after striking a fence post. The air bags did not deploy. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 17V821000 (Power Train); the VIN was included, but the vehicle had already been repaired. A Police report was not filed. No injury was reported. The manufacturer was notified of the failure but provided no assistance but informed the contact that the vehicle had previously been repaired under recall in 2019. The failure mileage was 116,000.
- Electrical system · Service brakes
DTC C0020-01 appeared after hitting a speed bump along with service TCS and ABS system. This message is displayed sometimes at random but mostly during common bumps in the road. Any wheel spin during wet weather also creates the message. Contacted the local Chrysler deal and was informed this was…
DTC C0020-01 appeared after hitting a speed bump along with service TCS and ABS system. This message is displayed sometimes at random but mostly during common bumps in the road. Any wheel spin during wet weather also creates the message. Contacted the local Chrysler deal and was informed this was common and to report it. I have yet to spend money to fix the issue since finding that the wrong part is often replaced and I am no longer under warranty.
- Electrical system
Hi, I own a 2013 Dodge Ram 2500 and the door locks do not lock all the time. The concern here is that when I have children in the truck the child safety locks do not lock and to me this is a concern. I had the door lock actuators replaced and that still didnt fix the problem. After doing research…
Hi, I own a 2013 Dodge Ram 2500 and the door locks do not lock all the time. The concern here is that when I have children in the truck the child safety locks do not lock and to me this is a concern. I had the door lock actuators replaced and that still didnt fix the problem. After doing research, there is a body control module that controls all electrical functions to the interior of the truck. If you use a scan tool and clear any codes in the module the door locks work perfectly for about 5-6 start cycles. The part #68200252AG is not available through mopar and has no replacement part number that supersedes the old one. Other item to note is this part number is the 6th updated revision. There is something wrong here and Mopar doesnt seem to care.
- Exterior lighting
hi beam, low beam, both sides flicker, go off, then come on. Driver's side (low and hi beam) is now permanently off even after having a repair shop fix them.
- Electrical system · Unknown or other
Front passenger door and both rear door locks operate intermittently. . Doors will unlock with key fob or either front door buttons or front door handles; but they will intermittently lock with key fob or front door buttons or while in drive. Doors not locking keep child safety locks from engaging…
Front passenger door and both rear door locks operate intermittently. . Doors will unlock with key fob or either front door buttons or front door handles; but they will intermittently lock with key fob or front door buttons or while in drive. Doors not locking keep child safety locks from engaging and children being able to exit vehicle without being in park. Also, prevents vehicle from being securely locked and protecting from theft of items. Truck been to dealership and told of problem they checked but could only get it to replicate issue 2 times and found nothing causing the problem. I have also found multiple Ram forums with a lot of people with same issue. There haven't been any warning lamps or messages before or during issues. The problem is intermittently and has last anywhere from a couple of days to several months at a time.
- Fuel/propulsion system
recall p65 preformed in 2015 the fuel filter housing is still a safety issue fuel leaks from connector causing fuel to leak on to the starter the fuel filter housing is defective
- Electrical system
My alternator randomly for the past couple of years randomly surges voltage and the dealership has tried contacting for the recall but told me I have to make a report for s68 campaign for alternator fix
- Unknown or other
Engine light comes on when you start the truck. Had the engine light checked said it's coming on because the def. The def had a recall a couple years ago and had it fixed but now the light IS coming back on for the same problem.
- Air bags
Airbag light keeps going on and off when driving. Makes a alarm sound when the light goes on and off. When you turn on the vehicle the truck says "airbags need to be serviced"
- Unknown or other
Electric door locks have locked and unlocked by them self and sometimes won't lock at all you have to keep hitting the fob button off and on till they actually lock or the lock button on inside door . this happened once while driving in a straight road, the other time's just when trying to unlock to get in and when getting out to lock it up
- Unknown or other
Shift solenoid
- Service brakes
TL* the contact owns a 2013 RAM 2500. The contact stated while driving 65 mph, the brake pedal was depressed however, failed to stop the vehicle. The contact engaged the parking brakes to stop the vehicle. The contact diagnosed the failure as an inner plastic liner tube in hose coming from the…
TL* the contact owns a 2013 RAM 2500. The contact stated while driving 65 mph, the brake pedal was depressed however, failed to stop the vehicle. The contact engaged the parking brakes to stop the vehicle. The contact diagnosed the failure as an inner plastic liner tube in hose coming from the steering wheel pump that jammed the power screw valve. The contact repaired the failure himself. The contact stated that he left messages for a local RAM dealer however, there was no response. The manufacturer was not informed of the failure. The failure mileage was 71,584.
- Power train
When pulling my key out after parking my vehicle and turning off the engine I am still able to shift gears with the key out of the ignition and my foot off the brakes
- Air bags · Engine · Unknown or other
1) airbag warning light keeps coming on 2) engine light keeps coming on. dodge service department says just ignore it. 3) 4X4 4WD has no resistance on interior gear shift
- Electrical system · Engine · Unknown or other
The last time my truck was in for recall was in 2016. They did not fix it then and have not fixed any recall since, but they clam that there IS only one recall open as of date. None of the recalls have been repaired. This IS being pencel whiped.
- Electrical system · Structure › Body
Door locks not operating properly with key fob, door panel control or keyless touch entry mechanisms. Started as intermittent issue but IS now hard failure...problem manifests with following symptom: using any lock/unlock mode only the drivers door and tailgate lock/unlock, whereas the front…
Door locks not operating properly with key fob, door panel control or keyless touch entry mechanisms. Started as intermittent issue but IS now hard failure...problem manifests with following symptom: using any lock/unlock mode only the drivers door and tailgate lock/unlock, whereas the front passenger door and two rear doors do not lock or unlock with any available mechanism...additionally, the front passenger door and two rear doors do not lock with the speed actuated locking mechanism either. This IS a significant safety issue and has been brought up in several owners forums.
- Steering · Suspension · Unknown or other
The track bar mounts have all the welds cracked and it causes the truck to shake uncontrollably and IS very dangerous. I have almost crashed twice due to this problem. I see that fca currently has a recall for this exact problem R46, my truck falls within the model and years but for some reason IS…
The track bar mounts have all the welds cracked and it causes the truck to shake uncontrollably and IS very dangerous. I have almost crashed twice due to this problem. I see that fca currently has a recall for this exact problem R46, my truck falls within the model and years but for some reason IS not covered under the recall. I noticed the problem driving on the highway at 60 mph the truck began to shake in a violent and uncontrollable manner all the cars around me slammed their brakes to stay away. I was able to brake down to 20 mph when the shaking stopped. I pulled over to the emergency lane to examine my truck and noticed the cracked welds on the track bar mount. I need to have this fixed under the recall as this IS a huge safety problem for my self and my fellow drivers I share the road with.
- Engine
While on an interstate highway. My RAM 2500 experienced a immediate loss of power. Causing a near collision from following vehicles. upon taking it in for service .it was found that the diesel particulate filter had exploded and pluged up the catalytic filter. I feel this IS a safety hazard. I…
While on an interstate highway. My RAM 2500 experienced a immediate loss of power. Causing a near collision from following vehicles. upon taking it in for service .it was found that the diesel particulate filter had exploded and pluged up the catalytic filter. I feel this IS a safety hazard. I contacted chrysler, because my truck was still under warranty. they said it was a wear item so would not be covered. How IS a catastrophic failure, a wear item ?
- Unknown or other
I was driving my GMC acadia when it started to smoke so I pulled over and it was on fire. The whole car burnt.
- Steering
On three separate occasions recently, the steering on my 2013 dodge 2500 exhibited a violent shaking when I hit a small linear ridge on the interstate while traveling at the posted speed limit such as going over a bridge or the line from asphalt installed over old concrete sections.. this violent…
On three separate occasions recently, the steering on my 2013 dodge 2500 exhibited a violent shaking when I hit a small linear ridge on the interstate while traveling at the posted speed limit such as going over a bridge or the line from asphalt installed over old concrete sections.. this violent shaking almost sent the truck off the road and only stopped when I slowed down below 30 mph. I have taken the truck to the dodge dealer and also a local garage and the drag link IS bent and the tie-rod ends have to be replaced. the vehicle has never been in an accident. I was told the bent drag link was a result of the violent shaking called the "death wobble". the cost to repair the steering system IS over $2200 and this truck only has 126,000 miles on it.
- Steering
Experiencing "death wobble" when speeds reach 50-55mph when driving on highway.
- Exterior lighting
The headlights have water in them. The seal IS bad.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Post Recall Remedy Brake Transmission Shift Interlock (BTSI) Failure
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models…
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models include 1500, 2500, 3500, 4500, and 5500 trucks equipped with a column mounted shift lever.The failures of the BTSI described in the VOQs occurred on vehicles that had all previously been repaired under recall 17V-821 or 18V-100.Both recalls address a potential condition which can cause the BTSI locking pin to become stuck allowing the transmission to be shifted out of Park without depressing the brake pedal and/or without having a key in the ignition.Shifting the transmission out of Park when not having the brake pedal depressed can result in a vehicle rollaway. ODI is opening this Recall Query (RQ) to review the effectiveness of the 17V-821 and 18V-100 recall remedies, understand the root cause of additional vehicle rollaway incidents, and identify any other possible root cause that may affect the performance of the BTSI system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
- Steering loss due to linkage separation
On December 17, 2018, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 18-016 to investigate the steering system on model year (MY) 2015 and 2016 Ram 2500 manufactured by FCA US, LLC (FCA). Four complaints were received alleging separation of the drag link, a steering linkage that…
On December 17, 2018, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 18-016 to investigate the steering system on model year (MY) 2015 and 2016 Ram 2500 manufactured by FCA US, LLC (FCA). Four complaints were received alleging separation of the drag link, a steering linkage that connects between the right front steering knuckle and the pitman arm on the steering box output shaft. The failures were found to be at a threaded coupler within the drag link used for adjusting the length of the linkage during routine maintenance (alignment) of the steering system.Once separation occurs, turning the steering wheel has no effect, and there is no way for the driver to control or maintain the direction of the vehicle. During the investigation, it was determined that the same threaded coupler was used on two different drag link designs FCA manufactured on MY 2013-2018 Ram 2500 and 3500 pickups. FCA refers to the designs as either 4x2 or 4x4 style. In both designs, the coupler is prevented from turning on the drag link via two jam nuts that are tightened against the coupler. In its response to NHTSA's March 15, 2019, Information Request (IR) letter, FCA identified 48 incidents alleging separation of the steering linkage at the coupler resulting in a loss of steering control. Of those, 13 involved a crash, one of which resulted in an injury. All of the separations involved the 4x4 style drag link. Additionally, FCA's IR response refers to over 300 4x4 style equipped vehicles that experienced, or may have experienced loosening of one or more coupler jam nuts. On January 25, 2019, FCA submitted a Defect Information Report (DIR) initiating NHTSA Recall No. 19V-021. In its DIR, FCA stated that the outboard jam nut in certain MY 2013-2018 Ram 2500 and 3500 could loosen potentially resulting in damage to the coupler and/or drag link threading allowing one end of the drag link to separate. The DIR notes that drag link separation results in loss of steering control, which in turn can cause a crash without warning. FCA's DIR did not identify a root cause for the defect, however it posits that an improperly torqued outboard jam nut could loosen, and with long-term vehicle use, cause damage to the outer link bar and/or coupler threads due to relative motion between the two components. The scope of Recall 19V-021 included vehicles with the 4x4 style drag link only. Also discussed in its IR response, FCA noted that the 4x2 style drag link contains a design difference (the outboard portion of the drag link is straight while the 4x4 style contains a bend) which it suggests may result in differences in the mechanical (bending) loads presented at the coupler and jam nut interface. Moreover, the DIR states that While root cause of the 4x4 style defect has not been established, FCA US believes that bending loads on the drag link is, at least, a causal contributing factor. FCA notes it did not identify any reports alleging 4x2 style separation as well as only three reports of loosening of jam nuts, two of which resulted in loosening that provided obvious warning to the vehicle operator, indicating a different failure mode.NHTSA is upgrading this investigation to Engineering Analysis (EA) 19-004 in order to continue to monitor the subject 4x2 style vehicles for evidence of field failures. Additionally, in conjunction with NHTSA's Vehicle Research and Test Center, ODI intends to more thoroughly study potential root cause(s) of the 4x4 style defect mechanism, and if identified, will seek to determine if the 4x2 drag link is susceptible to the same mechanism(s). NHTSA will also evaluate the long-term suitability of the recall
- Software security vulnerability
On July 23, 2015, Fiat Chrysler Automobiles (FCA) launched Safety Recall 15V-461 to remedy security vulnerabilities in approximately 1.4 million model year (MY) 2013 through 2015 vehicles equipped with Uconnect head units (HU) 8.4A (RA3 radio) and 8.4AN (RA4 radio) manufactured by Harman International.On July 24…
On July 23, 2015, Fiat Chrysler Automobiles (FCA) launched Safety Recall 15V-461 to remedy security vulnerabilities in approximately 1.4 million model year (MY) 2013 through 2015 vehicles equipped with Uconnect head units (HU) 8.4A (RA3 radio) and 8.4AN (RA4 radio) manufactured by Harman International.On July 24, 2015, the Office of Defects Investigation (ODI) opened Recall Query, RQ 15-004, to investigate HU security vulnerabilities and remedy effectiveness in the recalled population and to determine whether similar units have been supplied for use in other FCA vehicles.In an August 11, 2015 letter, FCA submitted a second Part 573 safety recall report expanding the scope of the Uconnect RA4 model radio to include additional 7,810 MY 2015 Jeep Renegade vehicles manufactured from September 18, 2014 through June 25, 2015 (Recall 15V-508).Scope analysis indicated that Uconnect radios installed in FCA vehicles not included in recalls 15V-461 or 15V-508 (subject recalls) are not equipped with built-in cellular access or short range wireless communication features and, thus, do not contain the security vulnerabilities addressed by the subject recalls. SUBJECT VEHICLES: MY2014 through 2015 Dodge Durango, Jeep Grand Cherokee and Jeep Cherokee sport utility vehicles; MY2013 through 2015 Ram 1500, 2500, 3500 and 4500/5500 pickup trucks; MY2013 through 2015 Dodge Viper vehicles; and MY2015 Chrysler 200, 300, Jeep Renegade, Dodge Charger and Challenger vehicles.According to FCA, long and short range wireless vulnerabilities identified in the recalled vehicles could allow unauthorized third-party access to, and manipulation of, networked vehicle control systems.Successful exploitation of the vulnerabilities, coupled with reverse engineering of networked microprocessor control modules, could result in unauthorized manipulation of vehicle control systems. This unauthorized manipulation of vehicle controls and systems could expose the driver, vehicle occupants or other highway users to an increased risk of injury.FCA and its network provider, Sprint, conducted a nationwide campaign to block access to a radio communications port that was unintentionally left open.On July 27, 2015, short range wireless vulnerabilities were also blocked.Finally, third party security evaluation and regression testing identified vulnerabilities that were either remedied by Sprint or through updates to the FCA Uconnect software.ODI identified a total of 30 complaints or field reports on unique vehicles submitted by FCA (29) or received by NHTSA (1) alleging incidents of theft from a vehicle or anomalous performance that the owner alleged were caused by, or may have been caused by, remote hacking.Twenty-six (87%) of these reports were submitted after a magazine article was published on July 21, 2015, describing the remote hacking of an FCA vehicle by researchers who were able to affect the operation of various vehicle control systems, including the service brakes, steering, throttle and ignition.Most of the complaints involved vehicle systems that were not safety critical (e.g., complaints related to radio, navigation system, or air-conditioning control) and did not affect vehicle control.Three complaints reported engine stalls.One owner reported sudden unintended acceleration allegedly related to hacking.None of the complaints or field reports reviewed involved the steering and braking vehicle control effects demonstrated by the research hackers prior to the recall.There were no confirmed incidents of hacking in any of the records reviewed by ODI.The remedies completed by Sprint and FCA appear to have eliminated vulnerabilities that mi
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010205Plate - Planetary
- 11002737Emission Recall 67A D Truck Engine Calibration
- 11002526EMISSION RECALL 67A D Truck Engine Calibration
- 11001134"6.7L Diesel Emissions Warranty Extension XQ1 Special Warranty Extension"
- 11001125"6.7L Diesel Emissions Warranty Extension XQ1 Special Warranty Extension"
- 11001049Warranty Bulletin D-24-10 (XQ1) Emission Control System Components Select 2013 - 2019 RAM 2500 Pickup (DJ) and 2013- 2019 RAM 3500 Pickup (D2)
- 11001020On Board Diagnosis (OBD) Monitor Readiness Information
- 10251812Emission Recall 67A D Truck Engine Calibration
- 10248914Emission Recall 67A - D Truck Engine Calibration
- 10248517LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
- 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
- 102427956.7L New Oil Usage Information Incorrect oil used. This bulletin provides information regarding the correct oil grade to use on the 6.7L Cummins used in the 2023 to 2013 HD Trucks. The following information is intended to eliminate confusion.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10239957Water Quality When Mixed With Engine Coolant
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 102319936.7L Diagnostic and System Improvements
- 10231991Doser Control Unit (DCU), Heater Thaw Time Improvements And MIL Illumination
- 10231989Powertrain Diagnostic And System Enhancements
- 10231979Mirror Tilt In Reverse Feature Is Not Functioning Correctly
- 10231735Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
- 10231712Malfunction Indicator Lamp (MIL) Illumination. NOx Sensor Diagnostic Trouble Codes (DTCs) Diagnosis Information.
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10229985reprogramming the Powertrain Control Module (PCM) with new software.
- 10229947(PCM) with new software
- 10229928RG3 RG4 RJ3 RJ4 Radio Enhancements
- 10229927Diesel Message Display In the Cluster May Have Overlapping Text
- 10229897Fuel Gelling in Cold Ambient Temperatures This bulletin involves reconfiguring the Body Control Module (BCM). Some customers may experience a Malfunction Indicator Lamp (MIL) due to fuel related Diagnostic Trouble Code (DTC) and/or may have a hard or no start condition due to fuel gelling in cold ambient temperatures (20F or -7C) or below. DTCs, such as P0087, P0191 or P026B (or other DTCs) may have been set.frame mounted fuel filter heater not to function. The condition is due to a configuration setting in the Body Control Module (BCM).
- 10229871Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
- 10229854Diagnostic and System Improvements
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229454Cooler - egr
- 102293416.7L New Oil Usage Information This bulletin provides information regarding the correct oil grade to use on the 6.7L Cummins used in the 2019 and newer HD Trucks. The following information is intended to eliminate confusion.
- 10229252CONDENSER, Air Conditioning CONDITION 1: If it is determined that the A/C compressor does not engage due to a refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.
- 10229204Poor Radio Reception This bulletin involves replacing the satellite antenna if needed. A customer may experience, SXM (Sirius/XM) radio has intermittent muting. This occurs in areas where XM signal is degraded and cell signal is very weak. The condition happens when the optional vehicle internet connection through the cell network is in use with the internal vehicle Wi-Fi. This Symptom/Condition Only Applies To 2014-2015 KL Vehicles: A customer may experience a popping noise when listening to AM stations.
- 10229031Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10228020Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
Every RAM 2500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.