2007 Toyota FJ Cruiser
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › FJ Cruiser › 2007
These records cover every 2007 Toyota FJ Cruiser. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2007 Toyota FJ Cruiser. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Corporation (Toyota) is recalling certain model year 2007-2013 FJ Cruiser vehicles manufactured January 25, 2006 through February 23, 2013 and equipped with a Toyota Auxiliary Driving Lamp Kits mounted to the front bumper. These lamp assemblies include 55 watt bulbs and due to this wattage and mounting angle, the combination of the upper beam…
Risk and remedy
Risk
Light intensities above the maximum allowable limit could cause increased glare for oncoming traffic and increase the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the 55 watt bulbs with 35 watt bulbs, free of charge. The recall began on June 6, 2013. Owners may contact Toyota at 1-800-331-4331.
Toyota is recalling certain model year 2007 through 2013 FJ Cruiser passenger vehicles. The retractors for the front driver and passenger seat belts are mounted in the access door (rear door) panels of the vehicle. Due to insufficient strength of the access door panel, cracks may develop in the panel if the access door is repeatedly and forcefully closed…
Risk and remedy
Risk
If cracks occur in the panel around the lower retractor anchor, the seat belt retractor could become detached, which could increase the risk of injury to an occupant in the event of a crash.
Remedy
The safety recall began on June 6, 2013. Toyota will mail an interim letter to owners late in April 2013. Remedy notifications to the owners for the repair will begin in late May 2013. Owners may contact Toyota at 1-800-331-4331.
Toyota is recalling certain Toyota Racing Development (TRD) brake kits, P/N PTR09-35070, and TRD High-Performance brake kits, P/N PTR09-35100, installed by Toyota vehicle processing centers and sold by Toyota dealers as an optional accessory for model year 2007 through 2012 Toyota FJ Cruiser vehicles. The subject TRD brake kit is specifically designed for…
Risk and remedy
Risk
If a brake tube becomes damaged and leaks fluid, it may result in increased stopping distances, and in some cases, loss of vehicle front braking performance, which could increase the risk of a crash.
Remedy
All known owners of 2007-2012 model year FJ Cruiser vehicles will be notified by first class mail. If the vehicle is equipped with one of the TRD brake kits, the brake caliper outer brake tube will be replaced with a newly designed one at no charge. During this service, if necessary, the dealer will make wheel balance adjustments. This remedy will be performed even if the vehicle has original equipment 16 inch or 17 inch wheels or TRD 16 inch Beadlock ring type wheels, which are not affected by the condition, to assure sufficient clearance in the event wheels are changed at a later time. Notification to owners began on December 17, 2012. Owners may contact Toyota Customer Experience Center at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
On certain passenger vehicles equipped with either bridgestone dueler or dunlop grandtrek tires, there IS a possibility that the inner bead of the tire may have been damaged. if the bead IS damaged, a bulge may develop on the sidewall of the tire and air may leak from the area of the damaged bead.
Risk and remedy
Risk
If the tire loses air pressure it may lead to a loss of vehicle control and increase the possibility of a crash.
Remedy
Dealers will inspect all five tires, including the spare tire, to determine if they are within the affected tire-to-wheel assembly range and replace all involved tires with new tires free of charge. the recall began on july 5, 2006. owners may contact toyota at 1-800-331-4331. note: due to an error in the dot serial number section of the technical instructions, a number of vehicles were not inspected correctly. toyota relaunched this campaign in mid-august 2006.
Owner complaints
593 complaints15 involved a crash5 involved a fire9 injuries
What owners report most
Latest complaints
- Structure › Body
Took FJ in for an inspection and was informed the frame was rusted to the point it could not pass inspection.
- Suspension · Unknown or other
Frame is rusted to the point of failure
- Structure › Frame and members › Underbody shields
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that while her son was attempting to start the vehicle, the vehicle failed to start. The vehicle was towed to an independent mechanic; however, no cause for the failure was found. The independent mechanic informed the contact that the…
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that while her son was attempting to start the vehicle, the vehicle failed to start. The vehicle was towed to an independent mechanic; however, no cause for the failure was found. The independent mechanic informed the contact that the undercarriage and subframe were severely corroded. The contact was informed that the vehicle should not be driven because the wheels might detach from the vehicle. The vehicle remained with the dealer unrepaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 185,000.
- Electrical system · Fuel/propulsion system · Steering
I was driving the vehicle to work and was unable to stop. I had to use the emergency brake system.
- Unknown or other
Silver paint is peeling off the hood, bumper, doors, ect
- Structure › Body · Suspension
Frame and undercarriage have excessive wear for age of vehicle despite normal maintenance and care. Rust and corrosion has made the vehicle unsafe to drive.
- Service brakes
I am the owner of a Toyota FJ Cruiser (Year:2007), VIN: [XXX] ]) equipped with the TRD High-Performance Brake Kit, which is under recall campaign C0R / NHTSA 12E046. I recently experienced a serious safety issue involving the front TRD brake crossover tube. While driving, I suddenly noticed a…
I am the owner of a Toyota FJ Cruiser (Year:2007), VIN: [XXX] ]) equipped with the TRD High-Performance Brake Kit, which is under recall campaign C0R / NHTSA 12E046. I recently experienced a serious safety issue involving the front TRD brake crossover tube. While driving, I suddenly noticed a soft brake pedal and significant loss of braking power. I was unable to stop the vehicle properly and nearly crashed into another car at an intersection. I had to swerve at the last moment, which could have caused a more serious accident. Upon inspection, I found that brake fluid was leaking from the crossover tube—exactly the defect described in the TRD brake recall. This failure happened without warning, and my safety and the safety of others was clearly at risk. This is unacceptable for a safety recall. I am requesting immediate investigation, assistance, and a permanent solution. Toyota must ensure this part is properly redesigned and replaced, and that no vehicle is left on the road with this faulty setup. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Seat belts
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that the front driver's side seat belt failed to retract. The contact related the failure to NHTSA Campaign Number: 13V098000 (Seat Belts). The dealer was notified of the failure and informed the contact that the VIN was not included in…
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that the front driver's side seat belt failed to retract. The contact related the failure to NHTSA Campaign Number: 13V098000 (Seat Belts). The dealer was notified of the failure and informed the contact that the VIN was not included in the recall. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 158,305.
- Structure
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that after it had rained, the front driver's side seat belt was wet, even though the windows were rolled up and the doors were closed securely. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact…
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that after it had rained, the front driver's side seat belt was wet, even though the windows were rolled up and the doors were closed securely. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact related the failure to Technical Service Bulletin: 00707 (Structure); however, the vehicle was not included in the TSB. The manufacturer was not made aware of the failure. The failure mileage was approximately 90,000.
- Structure › Body
-Toyota recalled the vehicles using the same/similar frame has the same rusty issues, like Tacoma. This recalled made me pay attention on this issue and I found the my FJ cruiser is no longer 100% safe while driving. -The frame of the body is very rusty after years which is not normal. I believe…
-Toyota recalled the vehicles using the same/similar frame has the same rusty issues, like Tacoma. This recalled made me pay attention on this issue and I found the my FJ cruiser is no longer 100% safe while driving. -The frame of the body is very rusty after years which is not normal. I believe most owners of this model having the same issue. There are rust everywhere under the body, when change some parts, it was really hard to do so, need the fire gun to burn all the screws. And the exhaust system all rusty and leaked as well, cost me a lot of money to fix. -The frame may broken anytime while driving which is risky to me and my passengers. -No dealers would like to fix that frame for me unless to pay a huge amount of Labour costs, which is higher than the value of the car. -it has been inspected by more than 5 car specialists and body shop workers, saying that frame is dying and won’t last for long, maybe will completely broken in a few years. -There is no issues on mechanics, just the under body rust. It happened a lot of years maybe 5-7 years before. -I’m from Canada.
- Unknown or other
While towing my boat, the rear frame to which the trailer hitch is a part of, ripped down both side of the frame. Basically, the rear frame of the truck is barley holding on by rust. The hitch and frame section are dangling down. Rust has completely eaten through the entire frame after closer inspection.
- Structure › Body · Suspension
My fj cruiser has terrible rust on the frame. It literally looks like it was stored in the ocean for 50 years. This vehicle is from 2007 and should not have this much rust.
- Seat belts
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that the driver's side seat belt failed to retract, causing the contact to have to manually put the seat belt in place. The contact stated that the failure recurred several times and progressed where the seat belt would not retract. The…
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that the driver's side seat belt failed to retract, causing the contact to have to manually put the seat belt in place. The contact stated that the failure recurred several times and progressed where the seat belt would not retract. The contact discovered NHTSA Campaign Number: 13V098000 (Seat Belts) and the dealer was contacted, and it was confirmed that the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 191,700. The contact stated vehicle has been repaired, and this case may be closed.
- Seat belts
Driver side seatbelt does not retract on my 2007 toyota FJ cruiser.
- Power train · Suspension · Unknown or other
The fj cruiser is a common issue for rot/ rust on the frame of the vehicle, I have clean the frame often during the winter months and my frame is continuously rusting and rotting the frame of the vehicle I have decided to not drive the vehicle till the frame is either replaced or repaired due to…
The fj cruiser is a common issue for rot/ rust on the frame of the vehicle, I have clean the frame often during the winter months and my frame is continuously rusting and rotting the frame of the vehicle I have decided to not drive the vehicle till the frame is either replaced or repaired due to the safety concern of driving it on the road, numerous others have same incidents of the holes in the frame due to rust the manufacturer did not put any kind of corrosion treatment on the frame to stop this from happening the frame flexes when accelerating and is not safe for anyone to including my passengers or other people on the road
- Seat belts
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that the front driver’s side seat belt retractor and locking mechanism was inoperable, failing to secure the driver as needed. The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the…
The contact owns a 2007 Toyota FJ Cruiser. The contact stated that the front driver’s side seat belt retractor and locking mechanism was inoperable, failing to secure the driver as needed. The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in the NHTSA Campaign Number: 13V098000 (Seat Belts). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 100,000.
- Fuel/propulsion system
The gas tank strap rusted so the gas tank was hanging low. I fixed the problem myself
- Structure › Body
I own a 2007 FJ Cruiser with very low mileage (below 80,000). It has a terrible carriage rust problem. I thought I'd had it remediated, finally, after endlessly searching for someone to address it. Dry ice treatment and undercoating were applied recently. I replaced the wheels and tires, as well.…
I own a 2007 FJ Cruiser with very low mileage (below 80,000). It has a terrible carriage rust problem. I thought I'd had it remediated, finally, after endlessly searching for someone to address it. Dry ice treatment and undercoating were applied recently. I replaced the wheels and tires, as well. All seemed well and it passed inspection. But, then the power steering started stiffening. So I had that attended to. The mechanic then told me the rack and pinion and a plethora of other issues were happening due to rust and corrosion - at an additional $$$$$$ cost. So far, this summer, I have spent close to $5,000 to resurrect this vehicle. I can't afford to invest anymore or justify doing so. I am looking to sell. But first I am investigating the FJ class-action against Toyota. I understand this class-action was denied in part last year in California. I plan to check any legal status that might still exist. My hope is that Toyota will acknowledge the problem with the FJs, recall and FIX the problem or at least reimburse me all my repair/remediation expenses. I know they won't do anything unless there is a lot of pressure and outcry to do so. Although, my FJ spent the first 16 years of its life in NJ (which many claim is the cause and of course is plausible - I don't disagree but not to this degree), it was not driven that much, garaged and well cared for. I did not really notice the rust issue until January 2021 when I took it to the local Toyota dealership. I think I was taking it there for an oil change. They were surprised that I'd driven it there because the brakes were so bad. I had it towed home and spent the next many months searching for someone to fix it. No one wanted to touch it until this summer 2023. The gentleman who dry iced and coated informed me about the lawsuit. I never received any kind of notice (thus far) from Toyota about any recall. So now I am garnering information and investigating the best I can. My FJ looks brand new except for frame corro
- Fuel/propulsion system · Suspension
I was driving down the street after filling up my fuel tank. I drove approximately 1/2 mile when I heard a sound, felt a clunk and stopped immediately. My fuel tank was hanging down on the ground. I called AAA and requested a flatbed and to bring a strap. He did not bring a strap and when my truck…
I was driving down the street after filling up my fuel tank. I drove approximately 1/2 mile when I heard a sound, felt a clunk and stopped immediately. My fuel tank was hanging down on the ground. I called AAA and requested a flatbed and to bring a strap. He did not bring a strap and when my truck arrived at the mechanic the fuel tank had completely separated from the vehicle. The other complaint I have is the rusted frame. I purchased this vehicle used. I did not notice that the tube before the rear axle which holds suspension supports to the frame were completely broken off and separated from the rusted out frame that has failed. It has been welding but the rusted frame is very difficult to weld to.
- Structure › Body · Unknown or other
Frame rust prematurely affecting integrity of the rear lower control arm mounts. Back half of frame almost completely rusted through requiring a full frame replacement.
- Suspension
Our 2007 FJ Cruiser when brought in for annual inspection has been deemed unsafe for use due to crack in frame due to corrosion. The vehicle has no other mechanical issues and runs as if new. We invested in 5 new tires and now find ourselves possibly having to purchase a new vehicle. We witnessed…
Our 2007 FJ Cruiser when brought in for annual inspection has been deemed unsafe for use due to crack in frame due to corrosion. The vehicle has no other mechanical issues and runs as if new. We invested in 5 new tires and now find ourselves possibly having to purchase a new vehicle. We witnessed all the other Toyota vehicles frames being replaced due to the recall regarding insufficient undercoating and excessive rust. We inquired if our vehicle was included and if there was reason for concern and were told No. We also own a 2010 Prius which we purchased new. We had no reason to question the validity of the answer. Years later we are grateful we did not experience any incident and crack was discovered before one happened. We now want to know why we did not get a replacement as did all the other models.
- Fuel/propulsion system
Rust is inherently bad on these vehicles. The other day i heard a weird noise under my truck driving down the road. As if I flung a rock up and hit a spring or something. To my dismay, I noticed the fuel tank hanging. One of the straps rusted to the point that it broke allowing the fuel tank to droop.
- Fuel/propulsion system · Service brakes · Unknown or other
I recently purchased the used 2007 Toyota FJ with 101,000 miles. During maintenance and inspection, it was found that the fuel tank straps are rusted out and need to be replaced. The rear brake lines are rusted out and need to be replaced. The frame is severely rusted out and failing at the factory…
I recently purchased the used 2007 Toyota FJ with 101,000 miles. During maintenance and inspection, it was found that the fuel tank straps are rusted out and need to be replaced. The rear brake lines are rusted out and need to be replaced. The frame is severely rusted out and failing at the factory welds. I was referred to submit a report and investigate filing a class action lawsuit against the manufacturer for negligence, as this is apparently a known issue. I am hoping that the will reach someone that is able to help all the owners with the same issues as this should be recalled and repaired to prevent unnecessary injury or death. This is a huge financial burden for those expecting a quality vehicle that will be safe. Failing brakes, loose gas tanks and weakened frames are recipe for disaster.
- Unknown or other
The frame on my 2007 Toyota FJ Cruiser has severe corrosion, compromising it's roadworthiness and the safety of occupants. It is available for inspection. Frame would not protect occupants during a crash, and may fail during normal operation. The problem has been confirmed by two independent…
The frame on my 2007 Toyota FJ Cruiser has severe corrosion, compromising it's roadworthiness and the safety of occupants. It is available for inspection. Frame would not protect occupants during a crash, and may fail during normal operation. The problem has been confirmed by two independent mechanics. It has not been further inspected. There were no warning lamps or symptoms until discovered by mechanic. Anecdotal information seems to indicate broad and serious corrosion problems with FJ Cruiser frames, but no warnings, recalls, or service bulletins have been issued.
- Fuel/propulsion system
Serviced 99% of the time at Toyota dealer. Within a week of having the vehicle serviced by the dealer, I noticed a rattling/banging. One gas strap had completely rusted through, and the other was hanging on by about a quarter inch of material. I always ask the dealer to inspect the frame due to the…
Serviced 99% of the time at Toyota dealer. Within a week of having the vehicle serviced by the dealer, I noticed a rattling/banging. One gas strap had completely rusted through, and the other was hanging on by about a quarter inch of material. I always ask the dealer to inspect the frame due to the history of rust problems on FJs—they have never flagged anything but I inspect it as I can myself, but have no way to lift the vehicle up thoroughly. I also have the service fluid applied by Rust Check to prevent/inhibit deterioration. On a sidebar, this summer I was traveling on the interstate when the rear-most crossmember rusted out while I was using a hitch haul to move a dresser to South Carolina.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10201400TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
- 10197494Technician Certification Requirements.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10197472Technician Certification Requirements.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190449OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0044-16.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10183281TT: HVAC drain tube is found to be blocked/clogged.
- 10182965TI: H0J Expired on October 5,2020
- 10182964DL: H0J Expired on October 5,2020
Every Toyota FJ Cruiser model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.