2008 Toyota FJ Cruiser
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › FJ Cruiser › 2008
These records cover every 2008 Toyota FJ Cruiser. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2008 Toyota FJ Cruiser. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2014 FJ Cruiser and Tacoma vehicles equipped with accessory wheels and tires installed by Toyota or dealers prior to the vehicle's first sale. The affected vehicles may list incorrect spare tire size and/or cold tire inflation information on the tire placard. As such…
Risk and remedy
Risk
If the spare tire is inflated to the incorrect pressure provided on the placard, tire failure may occur while it is being driven on, increasing the risk of a crash.
Remedy
For the involved vehicles, overlay stickers to correct the tire placard will either be mailed to owners or provided to dealers for placement over the incorrect information on the placard. The recall is expected to begin in September 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Corporation (Toyota) is recalling certain model year 2007-2013 FJ Cruiser vehicles manufactured January 25, 2006 through February 23, 2013 and equipped with a Toyota Auxiliary Driving Lamp Kits mounted to the front bumper. These lamp assemblies include 55 watt bulbs and due to this wattage and mounting angle, the combination of the upper beam…
Risk and remedy
Risk
Light intensities above the maximum allowable limit could cause increased glare for oncoming traffic and increase the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the 55 watt bulbs with 35 watt bulbs, free of charge. The recall began on June 6, 2013. Owners may contact Toyota at 1-800-331-4331.
Toyota is recalling certain model year 2007 through 2013 FJ Cruiser passenger vehicles. The retractors for the front driver and passenger seat belts are mounted in the access door (rear door) panels of the vehicle. Due to insufficient strength of the access door panel, cracks may develop in the panel if the access door is repeatedly and forcefully closed…
Risk and remedy
Risk
If cracks occur in the panel around the lower retractor anchor, the seat belt retractor could become detached, which could increase the risk of injury to an occupant in the event of a crash.
Remedy
The safety recall began on June 6, 2013. Toyota will mail an interim letter to owners late in April 2013. Remedy notifications to the owners for the repair will begin in late May 2013. Owners may contact Toyota at 1-800-331-4331.
Toyota is recalling certain Toyota Racing Development (TRD) brake kits, P/N PTR09-35070, and TRD High-Performance brake kits, P/N PTR09-35100, installed by Toyota vehicle processing centers and sold by Toyota dealers as an optional accessory for model year 2007 through 2012 Toyota FJ Cruiser vehicles. The subject TRD brake kit is specifically designed for…
Risk and remedy
Risk
If a brake tube becomes damaged and leaks fluid, it may result in increased stopping distances, and in some cases, loss of vehicle front braking performance, which could increase the risk of a crash.
Remedy
All known owners of 2007-2012 model year FJ Cruiser vehicles will be notified by first class mail. If the vehicle is equipped with one of the TRD brake kits, the brake caliper outer brake tube will be replaced with a newly designed one at no charge. During this service, if necessary, the dealer will make wheel balance adjustments. This remedy will be performed even if the vehicle has original equipment 16 inch or 17 inch wheels or TRD 16 inch Beadlock ring type wheels, which are not affected by the condition, to assure sufficient clearance in the event wheels are changed at a later time. Notification to owners began on December 17, 2012. Owners may contact Toyota Customer Experience Center at 1-800-331-4331.
Toyota IS recalling certain model year 2008 through 2011 FJ cruiser, land cruiser, tacoma, sequoia and tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring system (TPMS)." when factory-installed wheels and tires were replaced with toyota authorized accessory wheels and LT…
Risk and remedy
Risk
Failure to warn of tire deflations IS a non-compliance with fmvss 138 and could lead to tire failure increasing the risk of a crash.
Remedy
For the land cruiser, sequoia, tacoma and tundra vehicles, the dealer will re-calibrate the tire pressure monitoring system on affected vehicles and install an updated tire and loading information label at no charge. for the FJ cruiser vehicles, the TPMS cannot be reset so the electronic control unit (ecu) for the TPMS will be replaced. toyota IS currently developing the remedy ecu. if an owner IS not certain whether his or her vehicle IS equipped with these accessories, please contact any toyota dealer for an inspection at no charge. the safety recall began on march 31, 2011. owners may contact toyota at 1-800-331-4331.
Marathon IS recalling certain seat covers, brand superhides with part numbers 593, 594, 578, 960, 228, 228-09, 267-08, 333, 625, and 630, sold for use as aftermarket equipment for various passenger vehicles. these seat covers are made of heavier thread and are not compatible with seats containing side airbags. the heavier seat cover could interfere with…
Risk and remedy
Risk
An improperly deployed airbag could result in serious injury.
Remedy
Marathon will notify owners of record and replace the seat cover free of charge. the safety recall began on september 14, 2010. owners may contact marathon at 1-800-735-2769.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Owner complaints
124 complaints5 involved a crash1 involved a fire3 injuries
What owners report most
Latest complaints
- Steering
While operating my vehicle at normal legal speeds on a public road, the aftermarket Rough Country lifted steering knuckle suffered a sudden, catastrophic structural breakage at the tie-rod mounting point after hitting a standard pothole. The complete fracturing of the steering knuckle resulted in…
While operating my vehicle at normal legal speeds on a public road, the aftermarket Rough Country lifted steering knuckle suffered a sudden, catastrophic structural breakage at the tie-rod mounting point after hitting a standard pothole. The complete fracturing of the steering knuckle resulted in an immediate, unpreventable loss of steering control on the driver's side wheel. This sudden structural failure forced the front wheel assembly out of alignment, completely disabling the vehicle's steering mechanics and bending the lower drop crossmember brackets. This is a severe life-safety hazard. Had this casting failure occurred at highway speeds or in heavy traffic, it easily could have resulted in a rollover, a head-on collision, or a fatal accident. Heavy-duty cast suspension components should never experience catastrophic metal breakage from everyday public road imperfections. The manufacturer, Rough Country, is refusing to recognize this as a structural defect and is denying liability. This failure needs to be investigated immediately to see if there is an underlying casting, metallurgical, or design defect in Rough Country's lifted steering knuckles before it causes a fatal crash on public roads.
- Structure › Body · Suspension
Chassis frame rotted
- Unknown or other
I have 47k miles on my car. I took it in for an oil change (Fox Toyota, Rochester Hills, MI) and was told that it was dangerous to drive. I needed a new rear axle and much more. No details were provided. I could not open the email link they sent to my phone. I left the car at the service dept.…
I have 47k miles on my car. I took it in for an oil change (Fox Toyota, Rochester Hills, MI) and was told that it was dangerous to drive. I needed a new rear axle and much more. No details were provided. I could not open the email link they sent to my phone. I left the car at the service dept. 10/21/25 -prior to this visit I brought my car in to Fox for an oil change august 2024 and was told I would probably need new struts soon. I had appx 44,000 miles on my car at that time. - I park in my garage every night and have had an undercarriage wash each month at a car wash. - I live on a dirt road but my husband's 2017 Chevy Silverado has 180,000+ miles. -People online have asked me if I parked in the ocean -I contact Toyota Brand Engagement immediately. They paid a small amount ($3900) toward fixing the $17,000 bill. My car was in limbo at service for 30 days. I had not care. So I had to accept.
- Steering
The contact owns a 2008 Toyota FJ Cruiser. The contact stated while driving at an undisclosed speed, the contact became aware that the electronic power steering was not functioning properly, requiring increased steering wheel rotation before the vehicle started to maneuver in either direction. No…
The contact owns a 2008 Toyota FJ Cruiser. The contact stated while driving at an undisclosed speed, the contact became aware that the electronic power steering was not functioning properly, requiring increased steering wheel rotation before the vehicle started to maneuver in either direction. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was 197,000.
- Structure › Body
Premature frame rust
- Unknown or other · Wheels
The frame of the vehicle is rotted out. Holes in it. Front to back , side to side ROTTED. TOYOTA DEALER looked at it at my request when it was in for service and said it was very bad. I’m [XXX] on Social Security, I cannot afford a frame or a new car. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Seat belts
Seat belt just started to not work. retractor is not working and I am concern for my safety due to relocating to Florida and seat belt is not working.
- Service brakes · Steering · Suspension
the brakes are constantly binding up due to rust and need replaced, recently ABS brake lines rusted off causing me to miss a stop sign, very dangerous, Upper rear control arm mount rusted and cracked completely off causing steering and braking problems and had to be replaced to even use this…
the brakes are constantly binding up due to rust and need replaced, recently ABS brake lines rusted off causing me to miss a stop sign, very dangerous, Upper rear control arm mount rusted and cracked completely off causing steering and braking problems and had to be replaced to even use this vehicle, , The front rack has been replaced due to excessive rust of lines and fittings, same with transmission cooler lines-rotted off...brake backing plates rotted off.. Even though I have had this undercoated and rust treated, the frame is rusting inside-out...frame braces, everything on the frame is rusted much more than one would expect, even in a salt state like Ohio....my safety was put at risk by faulty brakes, the frame is not safe under hard braking and may cause an accident, the dealer has seen this vehicle, a local independent says "get rid of it"...no warning lamps, just wild things happen with brakes, pulls left, pulls right, front, then back and this past time ...NONE!...only 111,000 miles.
- Service brakes
On the home my wife went to apply the brakes and she had no brake pressure. The pedal went all the way to the floor. Then several lights and a buzzer sound started, and she could not stop the car. She was able to pull up on the e-brake just before she drove completely into the intersection, where…
On the home my wife went to apply the brakes and she had no brake pressure. The pedal went all the way to the floor. Then several lights and a buzzer sound started, and she could not stop the car. She was able to pull up on the e-brake just before she drove completely into the intersection, where several cars were driving in both directions. The front end of car ended partially in the north bound lane of US MD-5. There was also a home at the end of the road that she could have also driven into. I researched on several forums where other owners have had the same issue and the dealership has been unable to diagnose the issue. No TSB or recall has been made, but the number of people that have had this issue, something should have been done. My 4-year-old daughter was in the car, and I could have lost both of them. People need to aware of this. I had no idea that a total brake failure was possible with these vehicles.
- Chest clip, buckle, harness
I was given this car seat as a gift 12/18/2021. The metal buckle is inserted backwards on the left side. This results in a twist of the seat belt that can’t be corrected. I cannot remove the metal piece to fix this because the strap is sewn together. I thought it was just twisting because that’s what car seats sometimes do. But when I remove the padding to clean it today I realized it was a manufacturer error.
- Fuel/propulsion system
Rear fuel tank strap rusted and broke, leaving my tank hanging several inches lower to the ground.
- Structure › Body · Suspension · Unknown or other
After buying my vehicle I have began to notice a growing rust problem that is not due to salt water or other environmental conditions, but clearly a defect in manufacturing. After joining a few Facebook groups with other FJ owners I’ve found countless other people have had the same problem and that without massive trust removal my vehicle is expected to have failures in the frame and suspension at some point.
- Fuel/propulsion system
My Toyota FJ Cruiser 2008 "FUEL PUMP" failed to indicate the amount of gasoline I had in the tank, the car completely stop working on the freeway while I was driving approximately at 70 MPH right in the fast lane, the car/motor just ugly shook and suddenly it stall/shut down... luckily the cars…
My Toyota FJ Cruiser 2008 "FUEL PUMP" failed to indicate the amount of gasoline I had in the tank, the car completely stop working on the freeway while I was driving approximately at 70 MPH right in the fast lane, the car/motor just ugly shook and suddenly it stall/shut down... luckily the cars behind me were able to maneuver their cars and avoided a possible crash. I tried to start the car again and gave me some forward jumps until i got it off of the road. the gas panel indicator was still reading 1/2 filled tank but not gas inside tank...I called freeway service patrol (511) and they Offered me a gallon of gas, as i run out (they saved my day). i thought this was just one hit wonder problem but not the car has been getting me in trouble ever since now my wife drives it too, she or me assume there is still gas in the car and out of the blue i wind out carrying gas in a red gallon... i asked mechanics if they can replace but they said no easy - access to replace the pump is not well designed to extract the fuel pump and the floor mats on the car and the rear seat must be removed and some how the car will have some cosmetic damage... best is to lower the full gas tank from underneath but there is also a problem as the wire connector length are extremely short and they must be cut out and add extensions after replacing pump and may affect sensor lights... and repair for that is quite expensive. The car pump goes up when full tank but as gas is used needle stops at 1/2 mark and there is no way to tell if i have gas- I had experienced 8 time stalls, luckily no accidents - I found this online and called Toyota but they are unaware of this recall: "if stall pump fails, the engine can stall while driving, increasing the risk of a crash. Toyota will notify owners, and dealers will replace the fuel pump, free of charge. The recall began May 4, 2020. Owners may contact Toyota customer service at 1-888-270-9371" is it true?
- Seat belts · Seat belts › Front › Retractor
The driver seat belt will not contract back.
- Structure › Body
The frame of my Truck has started to rust out as to many FJ Cruisers. It's been a known issue that these frame have this problem along with the Toyota Tacoma and Toyota Tundra. Which Toyota have a recall on those two models but they've yet to recognize the Toyota FJ Cruiser for the same issue. If…
The frame of my Truck has started to rust out as to many FJ Cruisers. It's been a known issue that these frame have this problem along with the Toyota Tacoma and Toyota Tundra. Which Toyota have a recall on those two models but they've yet to recognize the Toyota FJ Cruiser for the same issue. If this issue isn't resolved, it can result in weak points in the chassis making those area fail and cause an accident underload. I have had my shop look at it and said they can only treat the affected areas so much but the issue will keep coming back over time as rust does not go away unless its cut out. For the safety for myself, any FJ Owners as well as the roads we share with the public I hope that we get this issue corrected through the Manufacturer. Thank you
- Structure › Body
While inspecting a broken rear fuel tank strap, several holes were noticed in the frame of the vehicle. Excessive corrosion was present all along the welds on the frame and its crossmembers. There were spots where I could poke my finger through the frame. There was no warning that this corrosion…
While inspecting a broken rear fuel tank strap, several holes were noticed in the frame of the vehicle. Excessive corrosion was present all along the welds on the frame and its crossmembers. There were spots where I could poke my finger through the frame. There was no warning that this corrosion was happening. I am the third owner of this FJ and it was inspected before I purchased it. The vehicle has not yet been taken to a dealership, police or an insurance company.
- Unknown or other
The rear fuel tank strap broke due to corrosion and it was retained. The Fuel tank was spotted hanging lower than normal after driving on a long trip on a vacation. I removed the tank shield and have removed the vehicle from service until new tank straps arrive. No police or insurance have been contacted. There was no warning of this failure or evidence this failure was imminent.
- Service brakes
Upon hard braking, if vehicle hits a bump, pothole, uneven road surface, etc, the ABS kicks in making it almost impossible to stop unless I completely release the brakes thus requiring me to slam on it hard to prevent rear ending another object.
- Structure › Body
Gas tank support straps failed while driving. dealer installed temporary nylon ratchet straps until parts arrived.
- Steering
My steering had become stiff, no steering fluid leaks or issues with the rack, dealer drove vehicle said nothing it wrong. I got home and took a better look, the u joints on the lower intermediate steering shaft are rusted and rotted. The steering in noticeably tight and has trouble returning to center.
- Seat belts
Driver side seat belt not retracting
- Service brakes · Structure › Body · Suspension
Frame, suspension, and brakes have extreme damage from rust. rear brakes are non-functional because of rust.
- Structure › Body
Extreme rust and cracking in frame
- Structure › Body
Excessive rust on the frame and undercarriage. needed to be cleaned and treated.
- Structure › Body · Suspension
This vehicle started to develope rust immediately after purchase. the vehicle IS a 2008 and IS scary rusty on the frame and other components. an abnormal amount of rust compared to other 2008 era vehicles. eventually one of these faulty frames are going to break in a high speed scenario and…
This vehicle started to develope rust immediately after purchase. the vehicle IS a 2008 and IS scary rusty on the frame and other components. an abnormal amount of rust compared to other 2008 era vehicles. eventually one of these faulty frames are going to break in a high speed scenario and serious injury or death will occur. my otherwise perfect FJ cruiser only has 35000 miles on it and sat in storage for the winter of 2016 and 2017.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10201400TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
- 10197494Technician Certification Requirements.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10197472Technician Certification Requirements.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190449OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0044-16.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10183281TT: HVAC drain tube is found to be blocked/clogged.
- 10182965TI: H0J Expired on October 5,2020
Every Toyota FJ Cruiser model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.