2006 Dodge Charger
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Charger › 2006
These records cover every 2006 Dodge Charger. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2006 Dodge Charger. Newest first.
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge…
Risk and remedy
Risk
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Chrysler (FCA US LLC) is recalling certain model year 2005-2009 Dodge Ram 2500, 2004-2008 Dodge Ram 1500 and Durango, 2006-2009 Dodge Ram 3500, 2008-2010 Dodge Ram 4500 and 5500, 2007-2008 Chrysler Aspen, 2005-2010 Chrysler 300, 300C, 300S, and SRT8, 2006-2010 Dodge Charger, 2005-2008 Magnum, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles.…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the affected Chrysler and Dodge owners and Mitsubishi will notify the affected Raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for Chrylser on June 8, 2015. The recall for Mitsubishi started on June 24, 2015. Chrysler and Dodge owners may contact Chrysler customer service at 1-800-853-1403. Mitsubishi owners may call 1-888-648-7820. Chrysler's number for this recall is R25. Note: This recall supersedes recall 14V817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.
Chrysler IS recalling 20,283 my 2006-2009 charger and magnum vehicles built with the police package and equipped with a column shifter. the gearshift cable may become disengaged from the steering column mounting bracket and cause an incorrect transmission gearshift position display.
Risk and remedy
Risk
This could allow the vehicle to move in an unexpected direction startling the driver, and cause a crash without warning.
Remedy
Dealers will add a redundant locking mechanism to the gearshift cable at the mounting bracket to ensure proper retention and shift linkage function. the recall began on november 10, 2008. owners may contact chrysler at 1-800-853-1403.
Certain passenger vehicles equipped with 2.7 liter engines and mk25e braking systems may exhibit inadequate clearance between the rear brake tubes and the exhaust gas recirculation tube. contact between the brake tubes and exhaust gas recirculation tube over an extended period of time may cause the brake tubes to wear through and cause a brake fluid leak.
Risk and remedy
Risk
This can result in a decrease of braking force and the potential for an engine compartment fire.
Remedy
Dealers will inspect the rear brake tubes for damage and replace them free of charge. a clip will also be installed to secure the brake tubes to the right front shock tower to maintain proper clearance to the exhaust gas recirculation tube. the recall began on june 26, 2006. owners may contact daimlerchrysler at 1-800-853-1403.
On certain pickup trucks, sport utility and passenger vehicles equipped with 42rle automatic transmissions, the cup plug that retains the park pawl anchor shaft may be improperly installed. if the shaft moves out of position, the vehicle may not be able to achieve 'park' position.
Risk and remedy
Risk
If this occurs and the parking brake IS not applied, the vehicle may roll away and cause a crash without warning.
Remedy
Dealers will inspect the transmissions and install a bracket to ensure the park pawl anchor shaft IS retained in the proper position. the recall began on november 28, 2005. owners may contact daimlerchrysler at 1-800-853-1403.
Owner complaints
1,294 complaints21 involved a crash12 involved a fire28 injuries2 deaths
What owners report most
Latest complaints
- Engine
I have a beautiful 2006 dodge daytona charger with 5.7L Hemi engine that has failed with 170,000 miles. It has been impeccably maintained with on time oil changes using Mobil 1 synthetic oil. The problem is the roller on the lifter for cylinder # 4 locked up and wiped the lobe off the camshaft...So…
I have a beautiful 2006 dodge daytona charger with 5.7L Hemi engine that has failed with 170,000 miles. It has been impeccably maintained with on time oil changes using Mobil 1 synthetic oil. The problem is the roller on the lifter for cylinder # 4 locked up and wiped the lobe off the camshaft...So now theres a misfire and the engine needs a rebuild! I know nothing lasts forever BUT.... most engines now a days make 200,000 no problem and most go well beyond that if maintained properly. I was expecting the same for this engine but This well-known problem finally struck me... I have had my lifetime warranty denied because the cost of the engine exceeds the value of the car so there lifetime warranty is a very mis leading and really an out rite lie!!! Chrysler/Stellantis knows all about these hemi engines failing but is leaveing its customers holding the bag! I think you should do an investigation do the huge number of failures!!!
- Structure › Body · Unknown or other
Severe rust under the car on frame and rear wheel wells. Looks likely unsafe to drive
- Engine
I filled up my gas tank on way home from work in [XXX] . Once i got on on ramp to get on freeway my 2006 dodge charger stalled. I lost all power and barely was able to get to side of on ramp. I waited a couple minutes after shutting car off. Then it started up again for me to get home. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Fuel/propulsion system
After filling the gas tank with gas.Car starts missing and engine will stall . If you stop at red light after filling up car will stall and the engine stops running. If you dot fill the car up to full it has no problem running it does as it should
- Engine · Power train › Automatic transmission › Control module (tcm/pcm/tecm)
The contact owns a 2006 Dodge Charger. The contact stated while idling at the traffic light, the vehicle stalled. The contact stated that the failure also occurred while driving at various speeds. The check engine warning light was illuminated. The contact was able to pull over to the side of the…
The contact owns a 2006 Dodge Charger. The contact stated while idling at the traffic light, the vehicle stalled. The contact stated that the failure also occurred while driving at various speeds. The check engine warning light was illuminated. The contact was able to pull over to the side of the road. The contact stated that the vehicle failed to restart on several occasions and was towed to the residence. The vehicle was taken to the dealer, where DTC: U0100 and P0700 were retrieved. The dealer flashed the computer; however, the failure persisted. The vehicle was taken to an independent mechanic, were the same DTC were retrieved and the failure was related to a loss of communication with the PCM and the Transmission Control Module. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 111,415.
- Service brakes
I have a dodge charger rt 2006 hemi. I was comming off ther highway . After taking the exit ramp I was heading to a red light my breaks failed! I had no breaks at all suddenly causing my car to crash into the car at the light. My car then traveled backwards without breaks. The police did arrive on…
I have a dodge charger rt 2006 hemi. I was comming off ther highway . After taking the exit ramp I was heading to a red light my breaks failed! I had no breaks at all suddenly causing my car to crash into the car at the light. My car then traveled backwards without breaks. The police did arrive on scene. The guy in other car thought I fell asleep as my car didnt even skid. I had to go in th eambulance and hospital said I had a concussion. I had insurance since buying the dodge second hand but, due to wrong info my incurance was cancelled. In nh you dont have to have insurance but now im left with my car in need of serios repair!! Im devastated. I had no issue to say I was at risk for break issues.
- Engine · Fuel/propulsion system · Steering
My 2006 Dodge Charger stalls after refueling, and now stutters when driving as if not getting fuel. I have noticed when attempting to break and stopping at stops this is happening more often. The car shuts down and could cause a accident. After researching this issue I found that this has been addressed already under investigation number PE13-016 by the NHTSA.
- Electrical system · Fuel/propulsion system · Unknown or other
I was almost rear-ended by a semi when the vehicle stalled at a light while picking my son up from work. It seems to stall at stop signs or waiting at lights completely. It stalls while idling here and there sometimes. Sometimes when driving on the e-way it jerks as it wants to stall but not…
I was almost rear-ended by a semi when the vehicle stalled at a light while picking my son up from work. It seems to stall at stop signs or waiting at lights completely. It stalls while idling here and there sometimes. Sometimes when driving on the e-way it jerks as it wants to stall but not completely. The main codes that pop up is u0100. Sometimes p0700 pops up and then sometimes the u0100 pops up along with a bunch of other codes. This has just started happening with my previous 2006 Dodge Charger 5.7 which has happened once or twice and a u0100 code pops up when scanned. I've scoured the internet for solutions and notice. There's a lot of people going through this similar situation and it so happens to be the 2006 year that's plagued with this problem. Even getting a new PCM doesn't solve the problem. Whomever is in charge of the Dodge company needs to figure out the exact cause of this problem before a driver/passengers gets injured or killed in an accident because of it. Please put some fire under their butt
- Fuel/propulsion system
The issue is that after fueling up my car I will drive a little ways down the road and the car will shut off and I will need to steer out of the way of traffic and restart the car. This will happen several times after refueling. This appears to be a common problem with 2006 Dodge Chargers…
The issue is that after fueling up my car I will drive a little ways down the road and the car will shut off and I will need to steer out of the way of traffic and restart the car. This will happen several times after refueling. This appears to be a common problem with 2006 Dodge Chargers, Magnums, and Chrysler 300s. It appears that the issue is that fuel was observed entering the purge line prior to initial shut off of the fill nozzle. This causes fuel to escape from the fuel tank assembly into the evaporative system. The multi-function control valve’s refueling float stays stuck in an open position and is the cause of this issue. “Rich fuel” gets into the engine and the engine will shut down. The NHTSA has investigated the issue under investigation number PE13-016. I was directed to report the issue to the NHTSA website if I have the issue, which I do.
- Air bags
Upon looking for my vehicle recalls it said my car had been repaired and I've owned it the last 7 years and it definitely has not since I've owned it.. That isn't true...
- Fuel/propulsion system
when i refuel start out in highway car stalls almost results in getting rear ended i found dodge knew about this but i did not get recall i bought car new this just started bout 12 months ago car only has around 65000 miles on it .it happened today 3/20/24
- Fuel/propulsion system
When I fill my car with gasoline, it starts to putter and shuts off. I have replaced the fuel pump and fuel transfer unit over 4 times since I have owned this vehicle. I had the same issue with my Chrysler 300. It is very frustrating and cost full. I just dropped my car at the shop to be looked at again. I just had a fuel/transfer pump done less than a year ago
- Fuel/propulsion system
After filling up with gas my car stalled 3 times within 30 minutes. One time while making a turn and my power steering locked up almost making me crash, another time at a red light and also while idling in my driveway.
- Fuel/propulsion system
I fuel my car up and it stalls and I can't controll where I am going, this IS happening more and more. Almost got hit from behind.
- Electrical system
My car has been stalling intermittently. But lately it's becoming more frequent. I've taken it to 3 different repair shops. Diagnostics shows P0700 and U1000 codes. The last shop charged me 150 dollars just to tell me that they don't know what's causing my car to stall. So I'm kind of lost here. Please help me.
- Fuel/propulsion system
The fuel tank with this car have issues when filled up. This issue started about 3-4 years ago. The gas tank haven't been inspected but I've changed literally every component associated with the fueling system. I wish I would've done research before hand and would've just saved money and known that…
The fuel tank with this car have issues when filled up. This issue started about 3-4 years ago. The gas tank haven't been inspected but I've changed literally every component associated with the fueling system. I wish I would've done research before hand and would've just saved money and known that there are issues with the fuel tank. The car when filled up or sometimes just putting a little gas it will either sputter or shut off. No check engine light comes on or nothing. However after doing research I found out that my VIN isn't in the recall listing. This makes absolutely no sense for the investigation into a broader VIN listing to be closed with the amount of complaints these year model cars fuel tank.
- Engine · Fuel/propulsion system
Valve in the top of the tank to release vapor through the purge system is stuck open allowing fuel in the system, is available for inspection. Car stalls while driving and at stops, stalled infront of ambulance. Has not been reproduced of confirmed by dealer, but it has happened everytime i fully refuel the car. Has not been inspected. No symptoms or warnings prior to issue occurring.
- Air bags
I got ZD1-00000 recall procedure done at Joe Cooper Dodge of Shawnee 4940 North Automall Dr. Shawnee, OK 74804. Recently I noticed my blower had started to perform rattling sounds, so I opened the glovebox, inspected the blower and found one little screw inside the turbine. I wondered where it…
I got ZD1-00000 recall procedure done at Joe Cooper Dodge of Shawnee 4940 North Automall Dr. Shawnee, OK 74804. Recently I noticed my blower had started to perform rattling sounds, so I opened the glovebox, inspected the blower and found one little screw inside the turbine. I wondered where it should be screwed, so I looked everything around and realized the passenger-side airbag is screwed on 2 screws instead 4 like it was designed. I am not in a position to make technical conclusions but looks like probably the serviceman who performed the airbag recall procedure gave up screwing all 4 screws. So, I called to Dodge Contact Center (FCA US LLC. Case #[XXX] and asked what they thought about this. Susan, the lady I talked to said they are basically not responsible for the recall procedure performing quality and I should ask for help from Joe Cooper Dodge of Shawnee. I declined any contact with Joe Cooper Dodge of Shawnee as far as in my opinion they neglected their professional duties and put me and my family in jeopardy. The point is simple, my intention was not to hide the situation and get a bonus from someone, but to inform the corporation about the possible quality issues with the recall procedure performed by their representatives. I also asked the FCA US LLC. to schedule an appointment with any other dealers to independently inspect the job quality related to recall procedures performed on my car. So, Susan from Dodge Contact Center a representative of FCA US LLC ignored the possible safety issue information that had been provided, she said Case # would[XXX] be closed. She also said the possible safety issues could be solved by another dealer but for the extra fee. FCA US LLC. forcing me to pay for the procedure, which is supposed to be free of charge regarding the Safety Act and Federal regulations. I kindly ask you to pay attention to Joe Cooper Dodge of Shawnee 4940 North Automall Dr. Shawnee, OK 74804. and FCA US LLC. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA
- Air bags
Was backing our of a parking spot when the driver's airbag went off. I was looking to the back right as I was slowly turning the wheel clockwise when the airbag triggered. At such low speeds I was able to safely hit the brake and park the vehicle. As a result my left hand was minorly injured, while…
Was backing our of a parking spot when the driver's airbag went off. I was looking to the back right as I was slowly turning the wheel clockwise when the airbag triggered. At such low speeds I was able to safely hit the brake and park the vehicle. As a result my left hand was minorly injured, while my front passenger only reported his ears ringing. My vehicle never made any contact with another vehicle or object. The Publix parking lot is a flat, paved surface. I took pictures all around and of my car soon after. I did have the airbags replaced because of the Takata recall some time ago (2017/2018 i think). If the vehicle was operated at a higher speed and the airbag went off, this would certainly cause an accident. I did inspect the vehicle afterwards and performed an EDR download. The CDR report is attached, however it reports that it is "Not retrievable by CDR Tool". There was a check engine light on at the time, I believe it was for code P0420. There may have been a low tire pressure light as well. Alignment was recently performed (~1 month ago) by a Tires Plus.
- Electrical system
Vehicles pcm failed causing the vehicle to shutdown randomly with no warning leaving you with a non running car in the middle of running traffic the PCM is not available for inspection sadly but have found through research that this is a common issue the PCM was found to be faulty by a technician at south pointe cjdr
- Fuel/propulsion system
After filling up with gas car shut off 1/2 mile causing loss of power steering. Restarted and did the same thing about 1/2 mile again
- Air bags
The contact owns a 2006 Dodge Charger. The contact stated that while parked, the driver's and the passenger air bags unintendedly deployed. The dealer was made aware of the failure. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 15V313000 (Air Bags) and…
The contact owns a 2006 Dodge Charger. The contact stated that while parked, the driver's and the passenger air bags unintendedly deployed. The dealer was made aware of the failure. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 15V313000 (Air Bags) and 16V352000 (Air Bags) for which the VIN was included. The manufacturer was not made aware of the failure. The failure mileage was unknown.
- Power train
My 2006 Dodge Charger R/T HEMI 5.7 has experienced multiple breakdowns in my transmission. Come to find out it is actually a Mercedes Benz transmission. Replaced multiple times after getting towed multiple times for transmission going out. Totally unacceptable.
- Fuel/propulsion system
When you fill the gas tank the vehicle cuts off and stalls in the middle of traffic and cannot restart. This has happened every time the tank was filled. Multiple times and every time
- Fuel/propulsion system
After filling up my gas tank I went to start driving again and my vehicle stalled out. It did this several more times.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Engine Stall
During PE13-016, Chrysler identified a condition in model year (MY) 2005 through 2006 Chrysler 300, Dodge Charger and Magnum vehicles equipped with 5.7L and 6.1L 8-cylinder HEMI engines that may result in engine stall after refueling when the vehicle is stopped or travelling at low speeds. According to Chrysler, the…
During PE13-016, Chrysler identified a condition in model year (MY) 2005 through 2006 Chrysler 300, Dodge Charger and Magnum vehicles equipped with 5.7L and 6.1L 8-cylinder HEMI engines that may result in engine stall after refueling when the vehicle is stopped or travelling at low speeds. According to Chrysler, the multifunction control valve (MFCV) fuel shutoff float integrated into 19-gallon fuel tanks can swell in a stuck open position allowing an overfill condition.This condition causes fuel to enter into the purge line which may result in engine stall after refueling.Chrysler's investigation determined that the problem was related to dimensional changes/swelling of the float when exposed to fuels with high ethanol content.Chrysler and its supplier, Stant, developed new fuel soak test requirements to address the condition and extended the warranty period on 19-gallon fuel tanks to lifetime coverage.The owner letter mailing began in January 2014.See the investigative file for copies of Chrysler's owner letter.The Office of Defects Investigation (ODI) analyzed 1262 complaints related to engine stall that were provided by Chrysler or submitted to ODI from consumers.In total, there were 299 unique reports indicating that the fuel system allowed an overfill condition after refueling, and the predominant failure mode identified involved stalling when stopped or travelling at low speeds.The complaint counts shown in this resume include incidents in which enough detail was available to verify the symptoms were related to the defect condition identified by Chrysler.The condition that is causing the majority of stalling incidents in the subject vehicles occurs at a stop or low speed and allows the vehicle to be restarted immediately.The condition represents a low risk to motor vehicle safety and is adequately addressed by Chrysler's extended warranty. This preliminary evaluation is closed. The ODI reports cited above can be viewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID?targetCategory=C under the following identification numbers (ODI Nos.): 10507307, 10507200, 10505652, 10505171, 10504826, 10504737, 10504085, 10503965, 10502091, 10501842, 10499752, 10496037, 10495284, 10494434, 10494394, 10493452, 10493120, 10490388, 10489004, 10487504, 10483660, 10480828, 10480763, 10477973, 10477450, 10474702, 10474358, 10473974, 10466062, 10458709, 10457762, 10455763, 10453489, 10453283, 10451227, 10450065, 10449138, 10446316, 10442787, 10442594, 10440885, 10439373, 10415682, 10399601, 10384811, 10365159, 10340153, 10336288, 10275134, 10510152, 10509942, 10509026, 10506031, 10505862, 10534319, 10534148, 10531912, 10520561, 10525368, 10524698, 10520820, 10520097, 10520012, 10515715, 10519379, 10516140, 10515325, 10515134, 10520305, 10514678.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10229256KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10229181Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
- 10223602Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221686KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10191460Valve Body. These may cause over drive cycling.
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10160021Seat Belt Interaction With Police Equipment
- 10136468Drivers And/Or Passenger Front Power Door Locks And Windows Inoperative U0200 Lost Communication With Passengers Door Module U0199 Lost Communication With Drivers Door Module This bulletin involves Inspecting the Drivers Door Module (DDM) and/or Passenger Door Module (PDM) and replacing one of both if necessary. The customer may experience any or all of the following conditions: The drivers and/or passenger front power locks and windows are inoperative. will work properly. The Technician may find Diagnostic trouble code (DTC), U0200 Lost communication with Passenger Door Module. The Technician may find Diagnostic trouble code (DTC), U0199 Lost of communication with Drivers Door Module.
- 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10121927NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
- 10062714Summary to be provided on a future date.
- 10050579Dodge: lost communication between drivers and passenger power door locks and windows are inoperative, and possibly need to be replace, if necessary, even though rear windows operate correctly. Model 2005-2010 300, charger.
- 10041252Chrysler service campaign: see document search button for owner letter. The radiator cooling fans may separate during operation and damage the radiator.
- 10023351Exterior lamp - lens fogging.
- 10023131This bulletin involves the replacement of mechanical clips for the intake manifold runner swirl valve linkage.
- 10022215Instrument panel resets if driver exits vehicle with the engine running or ignition in the run position.
- 10021688Police brake front pad lining life and noise.
- 10021686Mil illumination due to egr position sensor dtc - p0404, p0405, p0406.
- 10021599Passenger air bag deactivation.
- 10021414Install a high capacity cooling fan.
- 10021409Catalytic converter and reprogram pcm.
- 10021248Cracked windshield due to being hit by a foreign object like a stone.
- 10021247Tire pressure monitor system information.
- 10021239Powertrain control module initialization.
- 10021238Malfunction indicator lamp (mil) on for p0573.
- 10021209Mil illumination - dtc po300 - multiple cylinder misfire.
- 10020669Engine connecting rod bearings might have sand like debris. This could cause excessive wear on the rod bearings or could result in engine failure.
- 10020544Rear of sunroof glass IS not flush to roof/sunroof will not close.
- 10020541Delayed engine crank or mil illumination with dtc p0573.
- 100201923.5L #2 rod bearing and crankshaft journal inspection for contamination.
Every Dodge Charger model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.