2013 Dodge Charger
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Charger › 2013
These records cover every 2013 Dodge Charger. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
8 recalls name the 2013 Dodge Charger. Newest first.
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
Chrysler (FCA US LLC) is recalling certain 2009-2013 Jeep Wrangler, Chrysler 300, Dodge Challenger and Dodge Charger vehicles, and 2009-2011 Dodge Dakota vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U03.
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Challenger, Dodge Charger, Chrysler 300, Dodge Durango, and 2012-2014 Jeep Grand Cherokee vehicles. The affected vehicles have electro-hydraulic power steering (EHPS) and are equipped with a 5.7L or a 3.6L engine and a 160, 180 or 220 amp alternator. In the affected vehicles, the…
Risk and remedy
Risk
If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash. There is also the possibility that the alternator may short circuit, increasing the risk of a fire.
Remedy
Chrysler will notify owners, and dealers will inspect the alternator and depending on the part number, will replace the alternator, if necessary, free of charge. The recall began February 12, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T36.
Chrysler (FCA US LLC) is recalling certain model year 2012-2014 Dodge Charger and Chrysler 300 vehicles manufactured February 15, 2011, to November 27, 2014, and 2014-2015 Jeep Grand Cherokee vehicles manufactured July 16, 2012, to December 22, 2015. The affected vehicles, equipped with an eight-speed automatic transmission and a monostable gear selector…
Risk and remedy
Risk
Drivers thinking that their vehicle's transmission is in the PARK position may be struck by the vehicle and injured if they attempt to get out of the vehicle while the engine is running and the parking brake is not engaged.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software to mitigate the risk of vehicle rollaway, free of charge. The recall began on June 24, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S27. Note: On October 19, 2016 Chrysler identified some previously repaired vehicles did not receive the complete software updates. Chrysler will renotify the affected owners, and dealers will update the software again.
FCA US LLC (Chrysler) is recalling certain model year 2011-2016 Dodge Charger vehicles manufactured August 23, 2010, to January 7, 2016. When an affected vehicle is lifted using the supplied tire jack without chocking the wheels, the vehicle's body-side sill may give causing the tire jack to fail and the car to fall.
Risk and remedy
Risk
A car that falls unexpectedly increases the risk of injury.
Remedy
Chrysler will notify owners, and dealers will provide owners with wheel chocks and instructions for their use, free of charge. The recall began on March 21, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S03.
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger vehicles manufactured May 6, 2010, to June 5, 2014. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Risk and remedy
Risk
Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy
Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R35.
Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2014 Chrysler 300, Dodge Charger, Challenger, and Durango; and 2012-2014 Jeep Grand Cherokee vehicles manufactured April 22, 2010, to January 2, 2014, and equipped with a 3.6L engine and a 160 amp alternator. In the affected vehicles, the alternator may suddenly fail.
Risk and remedy
Risk
If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash.
Remedy
Chrysler has notified owners, and dealers will replace the alternator, free of charge. The recall began on February 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P60.
Chrysler Group LLC (Chrysler) is recalling certain model year 2013 Chrysler 300 AWD, Dodge Charger AWD, and Dodge Ram 1500 4x4 vehicles equipped with ZF all wheel drive ("AWD") 8HP45 transmissions. In the affected vehicles, the transmission output shaft may fracture.
Risk and remedy
Risk
The transmission output shaft fracture could result in a loss of power, increasing the risk of a crash. Additionally, if the parking brake is not applied before exiting the vehicle, the vehicle may roll away despite the transmission being placed in 'Park'.
Remedy
Chrysler will notify owners, and dealers will inspect and replace the transmissions, as necessary, free of charge. The recall began on March 31, 2014. Customers may contact Chrysler at 1-800-853-1403. Chrysler's recall number is N65.
Owner complaints
360 complaints25 involved a crash20 involved a fire18 injuries
What owners report most
Latest complaints
- Air bags
The contact owns a 2013 Dodge Charger. The contact stated that the airbag warning light illuminated. The vehicle was taken to a dealer, where it was not diagnosed; however, the dealer confirmed there were no open recalls associated with the VIN. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 90,000.
- Electrical system · Forward collision avoidance › Warnings · Service brakes
A few weeks ago I was traveling on unfamiliar curvy roads. It had recently rained. I fishtailed going through the curve, and my breaks locked up. Not long after I had the famous “Christmas Tree Lights” on my dash which are the ABS, Break, and FCW. Went to Advance Auto Parts to check code, and it…
A few weeks ago I was traveling on unfamiliar curvy roads. It had recently rained. I fishtailed going through the curve, and my breaks locked up. Not long after I had the famous “Christmas Tree Lights” on my dash which are the ABS, Break, and FCW. Went to Advance Auto Parts to check code, and it was C2200-49. Took to dealership and paid $200+ to learn the same. They quoted $1955 alone for the ABS Control Module because the part was discontinued by Mopar in 2025. Took to an independent shop for a recheck, and they confirmed they could not fix it because they couldn’t guarantee an added part would work since they were discontinued. I haven’t driven the vehicle for a month, and I’m wary of buying a remanufactured part on eBay. I researched and found the code is a processor failure pandemic on 2011-2014 models, and there was a massive national level backorder even before the part was discontinued. Mopar & Dodge need to make this right with a safety recall. My research shows it is unsafe to drive! Please help!! A recall was issued for Dodge Ram Trucks! 2013 Dodge Charger SXT with adaptive cruise control should be added. Thank you for your time!
- Service brakes, hydraulic
The contact owns a 2013 Dodge Charger. While attempting to make a right turn, the brake pedal was depressed, and the brake pedal became firm. To avoid crashing with the vehicle ahead, the contact veered out of the lane and the parking brake independently activated and the vehicle jerked to a stop…
The contact owns a 2013 Dodge Charger. While attempting to make a right turn, the brake pedal was depressed, and the brake pedal became firm. To avoid crashing with the vehicle ahead, the contact veered out of the lane and the parking brake independently activated and the vehicle jerked to a stop with the parking brake warning light illuminated. The vehicle was coasted to the shoulder and was later towed to a dealer to be diagnosed. The dealer diagnosed the vehicle with brake booster failure and informed the contact that the brake booster needed to be replaced. The vehicle remained with the dealer unrepaired. The manufacturer was not notified of the failure. The failure mileage was approximately 140,000.
- Electrical system · Service brakes · Vehicle speed control
The abs module lights came on and is not functioning properly. I contacted the dealership and the part has been on back order for years. The abs light, traction, and brake light is on simultaneously. Subsequently my wheel is locked up causing my car to not move at all and brake pedal has no pressure.
- Electrical system · Fuel/propulsion system
Vehicle: 2013 Dodge Charger R/T I’m reaching out because my car has been showing signs that seem to match the symptoms of the V62 recall that FCA issued for the fuel pump relay issue. I have a 2013 Dodge Charger R/T with the 5.7L HEMI engine. Lately, the car has been having trouble starting…
Vehicle: 2013 Dodge Charger R/T I’m reaching out because my car has been showing signs that seem to match the symptoms of the V62 recall that FCA issued for the fuel pump relay issue. I have a 2013 Dodge Charger R/T with the 5.7L HEMI engine. Lately, the car has been having trouble starting, especially after it’s been driven and sits in the heat. Sometimes it cranks but won’t turn over, and other times it randomly dies or stalls when I’m coming to a stop. It recently sat for a couple of days and then started again like nothing happened. This keeps happening on and off, and I’ve noticed it’s worse when it’s really hot outside or after it’s been driving a lot I took it to the dealership and they said my specific VIN isn’t part of the recall, but I wanted to report this because it really seems like the same issue. From what I’ve read, the V62 recall had to do with a faulty fuel pump relay that’s built into the TIPM and causes exactly these kinds of problems. I understand not all vehicles were included, but since I’m having the same symptoms and my car matches the year, make, and engine that recall applied to, I think it’s something that should be looked into. I’d really appreciate it if this could be reviewed. I just want to make sure my vehicle is safe and functioning properly, especially since the stalling can be risky depending on where and when it happens.
- Service brakes · Unknown or other
Anti-lock brake system and stability control system control module has failed and replacement parts have been unavailable. (For over a year me dealer has said.)
- Back over prevention › Warnings · Engine · Unknown or other
The "Vehicle Not in Park" warning message is a safety feature designed to prevent accidents and injuries. It's a standard safety feature in most modern vehicles, including the Dodge Charger. Here's what it's intended to do: When the vehicle is shifted out of Park (P) and the transmission is not…
The "Vehicle Not in Park" warning message is a safety feature designed to prevent accidents and injuries. It's a standard safety feature in most modern vehicles, including the Dodge Charger. Here's what it's intended to do: When the vehicle is shifted out of Park (P) and the transmission is not fully engaged, the system will display a "Vehicle Not in Park" warning message on the dashboard. This message is triggered by the vehicle's Transmission Control Module (TCM) or Electronic Stability Control (ESC) system, which monitors the vehicle's gear position and transmission status. The purpose of this warning is to alert the driver that the vehicle is not properly secured and may roll or move unexpectedly, potentially causing an accident or injury. This can happen when: The parking brake is not engaged: If the parking brake is not fully engaged or is released before shifting into gear, the system will detect this and display the warning message. The transmission is not fully engaged: If the transmission is not fully engaged in gear, such as when shifting from Park to Reverse or Drive, the system will detect this and display the warning message. The vehicle is not properly positioned: If the vehicle is not properly positioned on a level surface or on a slope, the system may detect this and display the warning message. To resolve the "Vehicle Not in Park" issue on your Dodge Charger: Ensure the parking brake is fully engaged. Check that the transmission is fully engaged in gear (e.g., Park, Reverse, Drive). Make sure the vehicle is properly positioned on a level surface or adjust it to a flat surface. The car is in park but will not turn off instead it runs until it decides it wants to turn off which can take several hours. This is a safety concern and issue that needs to resolved we pay to much money on these vehicles to deal with crappy problems due to bad mechanical issues and features
- Engine and engine cooling › Exhaust system · Fuel system, gasoline
The contact called on behalf of a customer who owns a 2013 Dodge Charger. The contact who is an independent mechanic, stated that the vehicle was driven to his place of business; however, upon arrival the vehicle was smoking with an abnormally strong fuel odor. The contact stated upon inspecting…
The contact called on behalf of a customer who owns a 2013 Dodge Charger. The contact who is an independent mechanic, stated that the vehicle was driven to his place of business; however, upon arrival the vehicle was smoking with an abnormally strong fuel odor. The contact stated upon inspecting the vehicle, the contact became aware that the fuel pump was dry, and fuel was leaking onto the ground from the side of the fuel tank. The contact stated that upon removal of the exhaust, the contact became aware that fuel was leaking from the exhaust pipe. The contact stated that when the muffler was removed, there was fuel pouring out of the muffler. Additionally, the contact stated that there was a hole in the heat shield and the fuel tank. The contact stated that the vehicle had two mufflers and no resonators installed. The contact stated that the fuel tank, muffler, exhaust pipe, and heat shield needed to be replaced. The vehicle was currently being repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 168,237.
- Engine
The contact owns a 2013 Dodge Charger. The contact stated while driving at undisclosed speeds, the lifters were making an abnormal tapping sound. There were no warning lights illuminated. The contact called the local dealer and was informed that there was no recall coverage for the failure. The…
The contact owns a 2013 Dodge Charger. The contact stated while driving at undisclosed speeds, the lifters were making an abnormal tapping sound. There were no warning lights illuminated. The contact called the local dealer and was informed that there was no recall coverage for the failure. The mechanic determined that the tapping sound was due to the lifters, which were causing excessed wear on the camshaft. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The approximate failure mileage was 145,000.
- Air bags · Engine · Service brakes
There’s a recall on 11 part on my vehicle
- Air bags · Electrical system · Power train
Power train, transmission output shaft fracture could result in a loss of power, increasing the risk of a crash. if the parking brake is not applied before exiting the vehicle, the vehicle may roll away despite the transmission being placed in park. The vehicle has been inspected. There are warning lights. They appeared 02/29/2024
- Steering
I'm driving mi dogde hard steering
- Steering
While driving the vehicle the steering became very difficult, to the point I could not control my car and had to pull over. The steering seem to have locked up while driving. I had it towed to auto repair shop which I was advised I had to change the power steering pump. That's not in my budget.
- Power train
The contact owns a 2013 Dodge Charger. The contact stated that after stopping at a stop light, the brake pedal was released and the accelerator pedal was depressed to make a left turn however, the vehicle failed to respond. The vehicle was towed to the residence and then towed to the dealer to be…
The contact owns a 2013 Dodge Charger. The contact stated that after stopping at a stop light, the brake pedal was released and the accelerator pedal was depressed to make a left turn however, the vehicle failed to respond. The vehicle was towed to the residence and then towed to the dealer to be diagnosed. The contact was informed that the output shaft had failed, and the transmission and transfer case needed to be replaced. The vehicle was not repaired. The contact referenced NHTSA Campaign Number: 13V610000 (Power Train). The manufacturer was notified of the failure and the contact was informed that the VIN was not included in the recall. The failure mileage was approximately 124,000.
- Unknown or other
Back up camera malfunction. This problem was recalled for 2015 models however my car is 2013. This still is a safety issue. Can not see over trunk without camera.
- Power train › Automatic transmission › Gear position indication (prndl)
The shifter module that was replaced under recall S27/NHTSA 16V-240 in August of 2016 started shifting itself into sport mode automatically and without warning in November of 2022. I took my car to James River Chrysler Dodge in Ozark, Mo in November to have the shifter module replaced. The…
The shifter module that was replaced under recall S27/NHTSA 16V-240 in August of 2016 started shifting itself into sport mode automatically and without warning in November of 2022. I took my car to James River Chrysler Dodge in Ozark, Mo in November to have the shifter module replaced. The dealership could not find a new Mopar shifter module because Chrysler stopped making them. There is no after market shifter modules available for this specific shifter module so James River Chrysler placed a used shifter module in my car. The used shifter module is automatically shifting the car into a lower sports mode gear without warning also which is a safety hazard for me, my family, and other individuals who are traveling in a proximity around me. I cannot purchase a new Mopar or after market shifter module for my car because no one is manufacturing this part. I want to report this safety hazard because there are numerous Dodge Chargers on the road that will potentially have the same situation as me in the very near future. Can Chrysler be held accountable to manufacture the shifter module to keep everyone safe on the roads? Thank you, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Electrical system · Steering
Power steering locks up, power steering fuses have blown three times in less than three months and there are thumping noises and vibrations when making turns.
- Engine
The contact owns a 2013 Dodge Charger. The contact stated while driving at an undisclosed speed, there was a ticking sound coming from the engine. The contact stated that the vehicle had experienced bucking, surging, hesitation, loss of power, and an engine misfire. The vehicle was taken to the…
The contact owns a 2013 Dodge Charger. The contact stated while driving at an undisclosed speed, there was a ticking sound coming from the engine. The contact stated that the vehicle had experienced bucking, surging, hesitation, loss of power, and an engine misfire. The vehicle was taken to the local dealer who diagnosed that the failure was due to premature wear of internal components within the engine and that the rocker arms, lifters, and camshaft were faulty. The contact was informed that the engine had failed and needed to be replaced. The engine was replaced. The manufacturer was notified of the failure. The VIN was not available. The failure mileage was 125,000.
- Fuel/propulsion system
Bad gas smell in car after I fill the tank
- Steering · Unknown or other
Intermittent disabling of the steering system resulting in multiple lights (abs, etc.) and steering locking up with the car in gear with no prior indication of an issue and no warning light or message prior to failure then today this happened along with delayed start and the power steering system…
Intermittent disabling of the steering system resulting in multiple lights (abs, etc.) and steering locking up with the car in gear with no prior indication of an issue and no warning light or message prior to failure then today this happened along with delayed start and the power steering system fail message presented so g with the car steering locking up and the car becoming immovable while in gear. This followed by the car not starting at all and remaining immovable requiring a rollback tow.
- Air bags
The contact's son owns a 2013 Dodge Charger. The contact stated that the air bag warning light was illuminated. The contact called the local dealer and made them aware of the failure. The vehicle was not diagnosed or repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 98,000.
- Power train
When the car is parked and I engage the shifter from Park to drive the car is making a clicking and thumping sound and it’s the same when I shifted from drive to reverse
- Air bags
I made an appointment with a dealership to get the recall repaired. I took it to the dealership the next day to drop it off so they can repair it. A few days later I get a call saying that the airbag inflator is badly damaged and wanted me to pay $1100 for it when it’s a free recall. And I declined the offer for it and picked it up the next day and left.
- Steering
The contact owns a 2013 Dodge Charger. The contact stated that while the vehicle was in reverse, the steering wheel suddenly became very difficult to turn in either direction. The vehicle was towed to the local dealer who diagnosed that the power steering pump was faulty and needed to be replaced.…
The contact owns a 2013 Dodge Charger. The contact stated that while the vehicle was in reverse, the steering wheel suddenly became very difficult to turn in either direction. The vehicle was towed to the local dealer who diagnosed that the power steering pump was faulty and needed to be replaced. The power steering pump was replaced, and the failure was remedied. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 61,000. Consumer stated the only warning on the screen of the car was for air pressure on the tires.
- Engine
While driving on the interstate at a high rate of speed the MDS engaged and suddenly, the engine dies. I am unable to accelerate and have to coast across 3 lanes of traffic to reach the emergency lane. The timing chain tensioner and timing chain guides had broken into multiple pieces and the timing…
While driving on the interstate at a high rate of speed the MDS engaged and suddenly, the engine dies. I am unable to accelerate and have to coast across 3 lanes of traffic to reach the emergency lane. The timing chain tensioner and timing chain guides had broken into multiple pieces and the timing chain was also broken. The failure of the timing components resulted in warped values, bent push rods and catastrophic engine failure. This left me sitting in my car on the side of the interstate for several hours in the dark. There were no warning lamps or any problems with how the engine had operated before it suddenly died. All parts that have been removed from the car have been kept for inspection. There is a recall for the same OEM timing components failing and causing sudden engine failure for 2009-2012 Dodge Chargers. Dodge used the same timing tensioner, timing arm guide, and timing chains in Chargers built from 2009 to 2019. Why would the recall be extended to all years that used these parts. If they had recalled all the years those parts were used my car engine would not quit suddenly at 80mph and I have to coast across three lanes of traffic or sit in the emergency for hours waiting on a ride. .
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Vehicle rollaway, engine on
On April 22, 2016, Fiat Chrysler Automotive US LLC, (FCA) submitted a Defect Information Report (DIR) to NHTSA regarding a defect that could result in unattended vehicle rollaway with the engine running in approximately 811,586 model year (MY) 2012 to 2014 Dodge Charger and Chrysler 300 vehicles and MY 2014 to 2015…
On April 22, 2016, Fiat Chrysler Automotive US LLC, (FCA) submitted a Defect Information Report (DIR) to NHTSA regarding a defect that could result in unattended vehicle rollaway with the engine running in approximately 811,586 model year (MY) 2012 to 2014 Dodge Charger and Chrysler 300 vehicles and MY 2014 to 2015 Jeep Grand Cherokee vehicles equipped with 8-speed transmissions and a monostable gear selector (NHTSA Recall #16V-240, FCA Recall #S27). According to FCA's DIR, The existing strategies built into these vehicles to deter drivers from exiting the vehicle after failing to put the transmission into PARK have not stopped some from doing so. Drivers erroneously concluding that their vehicle's transmission is in the PARK position may be struck by the vehicle and injured if they attempt to get out of the vehicle while the engine is running and the parking brake is not engaged.The vehicles recalled by FCA are equipped with Monostable electronic (shift-by-wire) gearshift assemblies supplied by ZF Group (see Figure 1).The subject Monostable shifter has a single neutral position that it snaps back to when the driver releases the shift knob.Although the Monostable gearshift has the familiar appearance of a conventional console mechanical gearshift assembly, it has an unfamiliar movement that does not provide the tactile or visual feedback that drivers are accustomed to receiving from conventional shifters.Consequently, the driver must take additional time to verify that the desired gear position was achieved by checking the PRNDL display on the shift knob or the Electronic Vehicle Information Center (EVIC) display.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248517LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10247995Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10247906ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10247905ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
- 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10241118Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
- 10239957Water Quality When Mixed With Engine Coolant
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10234468Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10234379ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10234378ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10231970This bulletin involves replacing the left side or the right side or both side tension struts.
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10229945MIL Illumination: P0300, P0302, P0304 or P0306 (X56 Warranty Extension)
- 10229899MIL Illumination: P0300, P0302, P0304 or P0306 (X56 Warranty Extension) This bulletin involves checking for excessive cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300- Multiple Cylinder Misfire P0302- Cylinder 2 Misfire P0304- Cylinder 4 Misfire P0306- Cylinder 6 Misfire
- 10229892Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
- 10229871Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
- 10229857Transmission Shift Enhancements - Adaptation Drive Learn Procedure
- 10229810Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229242This bulletin involves modification or replacement of the backlite rear shelf
- 10229031Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10228020Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10226286Steering Column.
- 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 102248775.7L Cold End Exhaust RH Side (Resonator & Muffler) Engineering is currently investigating an issue where the back-end exhaust system (resonator and muffler right hand assembly) cracks at or around the weld near the muffler with Model Year '13, '14, '16, and '17 Charger and Challenger 5.7L. Please call Design Release Engineer Jeff Robinson at cell phone (315) 408-6055 and send a photo of the part to him at Jeff.Robinson@fcagroup.com. If no response in 15 minutes, please proceed with repair.
- 10224607Verify two (2) 6102212AA alignment dowel pins are installed in the 4x4 adaptor prior to transmission installation.
- 10223987Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10223855Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
- 10223834Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination or a less than desired powertrain response when operating their vehicles in high ambient temperatures. Upon further investigation the technician may find one or more of the following DTCs have been set: P0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance. (Sales Code ERB). (LD, LX vehicles only). P0606 - Internal Control Processor.
- 10223642This bulletin involves performing a USB service flash of the Hands Free Module.
- 10223641This bulletin involves performing a USB service flash of the Hands Free Module.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
Every Dodge Charger model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.