2012 Dodge Charger
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Charger › 2012
These records cover every 2012 Dodge Charger. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
14 recalls name the 2012 Dodge Charger. Newest first.
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
Chrysler (FCA US LLC) is recalling certain 2009-2013 Jeep Wrangler, Chrysler 300, Dodge Challenger and Dodge Charger vehicles, and 2009-2011 Dodge Dakota vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U03.
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Challenger, Dodge Charger, Chrysler 300, Dodge Durango, and 2012-2014 Jeep Grand Cherokee vehicles. The affected vehicles have electro-hydraulic power steering (EHPS) and are equipped with a 5.7L or a 3.6L engine and a 160, 180 or 220 amp alternator. In the affected vehicles, the…
Risk and remedy
Risk
If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash. There is also the possibility that the alternator may short circuit, increasing the risk of a fire.
Remedy
Chrysler will notify owners, and dealers will inspect the alternator and depending on the part number, will replace the alternator, if necessary, free of charge. The recall began February 12, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T36.
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge…
Risk and remedy
Risk
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Chrysler (FCA US LLC) is recalling certain model year 2012-2014 Dodge Charger and Chrysler 300 vehicles manufactured February 15, 2011, to November 27, 2014, and 2014-2015 Jeep Grand Cherokee vehicles manufactured July 16, 2012, to December 22, 2015. The affected vehicles, equipped with an eight-speed automatic transmission and a monostable gear selector…
Risk and remedy
Risk
Drivers thinking that their vehicle's transmission is in the PARK position may be struck by the vehicle and injured if they attempt to get out of the vehicle while the engine is running and the parking brake is not engaged.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software to mitigate the risk of vehicle rollaway, free of charge. The recall began on June 24, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S27. Note: On October 19, 2016 Chrysler identified some previously repaired vehicles did not receive the complete software updates. Chrysler will renotify the affected owners, and dealers will update the software again.
FCA US LLC (Chrysler) is recalling certain model year 2011-2016 Dodge Charger vehicles manufactured August 23, 2010, to January 7, 2016. When an affected vehicle is lifted using the supplied tire jack without chocking the wheels, the vehicle's body-side sill may give causing the tire jack to fail and the car to fall.
Risk and remedy
Risk
A car that falls unexpectedly increases the risk of injury.
Remedy
Chrysler will notify owners, and dealers will provide owners with wheel chocks and instructions for their use, free of charge. The recall began on March 21, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S03.
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger vehicles manufactured May 6, 2010, to June 5, 2014. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Risk and remedy
Risk
Air bags that unexpectedly deploy increase the risk of a crash or injury.
Remedy
Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R35.
Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2014 Chrysler 300, Dodge Charger, Challenger, and Durango; and 2012-2014 Jeep Grand Cherokee vehicles manufactured April 22, 2010, to January 2, 2014, and equipped with a 3.6L engine and a 160 amp alternator. In the affected vehicles, the alternator may suddenly fail.
Risk and remedy
Risk
If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash.
Remedy
Chrysler has notified owners, and dealers will replace the alternator, free of charge. The recall began on February 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P60.
Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2012 Dodge Charger vehicles manufactured May 20, 2010, through November 8, 2011, and equipped with halogen headlamps. In the affected vehicles, a sub-harness for the headlights may overheat and cause the low beam headlights to go out.
Risk and remedy
Risk
Loss of headlights reduces the driver's visibility, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the headlamp jumper harnesses and bulbs, or the headlamp assemblies, as necessary, free of charge. The recall began on May 2, 2014. Owners may contract Chrysler at 1-800-853-1403. Chrysler's number associated with this recall is P08. This recall concerns non-police vehicles. A separate campaign was launched in 2012 to address police vehicles. See NHTSA recall 12V-042.
Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2012 Chrysler 300, Dodge Challenger, and Dodge Charger vehicles manufactured April 11, 2011, through December 14, 2011. The affected vehicles may have improperly sized terminal crimps on the seat side-airbag wiring harness which may cause the seat side-airbags to malfunction and illuminate…
Risk and remedy
Risk
In the event of a crash necessitating airbag deployment the airbags may not operate as designed, increasing the risk of injury.
Remedy
Chrysler will notify owners, and dealers will replace both driver and passenger seat airbag wiring harnesses, free of charge. The recall began on April 22, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N07.
Chrysler IS recalling certain model year 2011 and 2012 300 and dodge charger vehicles. these vehicles may lose abs/esc system function due to an overheated power distribution center.
Risk and remedy
Risk
This could lead to loss of vehicle control, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will relocate the abs/esc system fuse, free of charge. the safety recall began on may 18, 2012. owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling certain model year 2011 and 2012 dodge charger police vehicles. the low beam headlamps of some vehicles could fail due to an overheated bulb harness connector. other vehicles may lose abs/esc system function due to an overheated power distribution center.
Risk and remedy
Risk
This could lead to loss of visibility and/or braking ability, increasing the risk of a crash.
Remedy
Chrysler will notify owners and dealers will replace the headlamp jumper harnesses and relocate the abs/esc system fuse within the power distribution center, free of charge. the safety recall began on april 2, 2012. owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling certain model year 2012 dodge charger SRT8 and the chrysler 300 SRT8 vehicles manufactured from may 2, 2011, through november 17, 2011, for failing to comply with the requirements of federal motor vehicle safety standard number 138, "tire pressure monitoring system" (TPMS). as built, the TPMS does not warn the driver when a tire IS…
Risk and remedy
Risk
Underinflated tires can result in tire overloading and overheating, which could lead to a blowout and possible crash.
Remedy
Chrysler will notify owners and dealers will reprogram the vehicles TPMS. this service will be performed free of charge. the safety recall began on march 2, 2012. owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling certain model year 2012 chrysler vehicles, including 200 and town and country models, dodge vehicles, including charger, durango, grand caravan and journey models and jeep grand cherokee vehicles manufactured from august 31, 2011, through september 13, 2011, that are equipped with 3.6L engines. these engines may experience connecting…
Risk and remedy
Risk
Connecting rod failure may lead to engine seizure which may increase the risk of a crash.
Remedy
Chrysler will notify owners and replace the engine free of charge. the safety recall IS expected to begin on or about november 18, 2011. owners may contact chrysler at 1-800-853-1403.
Owner complaints
648 complaints20 involved a crash49 involved a fire16 injuries
What owners report most
Latest complaints
- Air bags
My airbag light comes on intermittently and when I called the dealership and told them they brushed it off as nothing. My car already had open recalls for the airbag and got fixed but it’s still having the same issues. I had the car since October of 2025 and there was no lights on when I financed…
My airbag light comes on intermittently and when I called the dealership and told them they brushed it off as nothing. My car already had open recalls for the airbag and got fixed but it’s still having the same issues. I had the car since October of 2025 and there was no lights on when I financed it. The car has had 2 airbag related recalls done in 2015, 2019. Is there any way of getting my vehicle fixed by the dealership or manufacturer due to a safety concern of the airbag light randomly coming on. The dealership and manufacturer is claiming out of date for the work and it’s my job to pay for the diagnostic fee for the airbag light/getting it fixed.
- Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Warnings · Service brakes
Brake Light, ABS Light, and Traction Control Light lit up on dash. Took car to dealership and the issue was diagnosed as a faulty ABS module. This is MOPAR part 68160269AB, which is discontinued. I was also told that there were no after-market options, and that programming a used one might not…
Brake Light, ABS Light, and Traction Control Light lit up on dash. Took car to dealership and the issue was diagnosed as a faulty ABS module. This is MOPAR part 68160269AB, which is discontinued. I was also told that there were no after-market options, and that programming a used one might not work. So I have no option to get ABS functionality for my car. I am willing to pay for the part and labor to get this repaired, and Dodge is not even giving me the option.
- Electrical system
Headlight pigtail assembly burned out as described in the 2014 safety recall. 14V-101 / P08 Recall Summary The wiring sub-harnesses for the headlights may overheat, and the low beam headlights may fail. Dealers will replace the headlamp jumper harnesses and bulbs or the headlight assemblies as needed free of charge to resolve the concern.
- Air bags · Power train
While driving my 2012 dodge charger at times it pops out of driving going into neutral. It happens when I'm on the hwy or in town. And the air bags has illuminated on the dash and it is at the dealership, and I was told, I have to pay for everything out of pocket.To replace it, popping out of gear…
While driving my 2012 dodge charger at times it pops out of driving going into neutral. It happens when I'm on the hwy or in town. And the air bags has illuminated on the dash and it is at the dealership, and I was told, I have to pay for everything out of pocket.To replace it, popping out of gear while driving and the airbags. The dealership is not going to warranty anything because it's past. It does it off and on, and I don't know when it's going to happen. Popping in and out of gear. So I took it to the [XXX] 4025 Cleveland Blvd Caldwell Idaho. 83605. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags · Power train
Can not put car into park i have took it to normals dealership and referred to me that it's a recall issue.
- Electrical system
My vehicle has been experiencing electrical issues causing my radio to cut off and my car to cut off and lose power while driving. When the car is moving and loses power it's causes the vehicle to shift into neutral.
- Electrical system · Engine · Fuel/propulsion system
Says that my car is simply just dead smells like gas when trying to start up and shakes but doesn’t start up
- Electrical system · Engine · Service brakes
I have called the dealerships in Fresno Ca and Clovis Ca asked them to check out my car because of all the recalls that were done by them I'm having problems with it or had to replace it again. I also told them since it was a recall and they supposedly repaired it I wanted them to check into it to…
I have called the dealerships in Fresno Ca and Clovis Ca asked them to check out my car because of all the recalls that were done by them I'm having problems with it or had to replace it again. I also told them since it was a recall and they supposedly repaired it I wanted them to check into it to see if the wrong was done because anyone could falsify a document I was turned away from both dealerships. I have receipts for parts I have replaced that were recalled, as diagnostics tests. This has been going on since 2022 one after another and then affects other parts I even asked them to do a software update for the electronic monostable gear they said no.
- Tires
tire size is 235/55R19 the tires had to be replaced because they were wearing unevenly and loosing tread quicker than we believe they should. The rims prematurely rusted and the caps rusted so badly they could not be put back on the vehicle after the new tires we purchased were put on the car.
- Electrical system · Service brakes · Unknown or other
My insuramce claim is [XXX]. [XXX] afternoon. My car was parked on hill parking lot. I put on drive, was getting ready to leave and go home. Car has no acceleration, start sliding down while i stepped on gas. So I stepped on brake and no brake, car kept sliding downhill and hit another subaru.…
My insuramce claim is [XXX]. [XXX] afternoon. My car was parked on hill parking lot. I put on drive, was getting ready to leave and go home. Car has no acceleration, start sliding down while i stepped on gas. So I stepped on brake and no brake, car kept sliding downhill and hit another subaru. Nothing worked then I stepped on e brake and saved my life. My car computer has a malfunctioning.This car and accident has causes me so much emotional stress, i was shaking up and i will not ever get into that car again. Please contact me [XXX] . Id like you guys to get into my car computer box to tell me what caused my car out of control before i take my car to dodge. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine
The contact owns a 2012 Dodge Charger. The contact stated while driving 55 MPH, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The vehicle was towed to an independent mechanic where it was diagnosed with timing chain failure. The contact was informed…
The contact owns a 2012 Dodge Charger. The contact stated while driving 55 MPH, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The vehicle was towed to an independent mechanic where it was diagnosed with timing chain failure. The contact was informed that the timing chain needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The contact referenced Customer Satisfaction Program: P01; however, the VIN was not included. The failure mileage was approximately 140,000.
- Electrical system
The battery keeps dying. The vehicle is draining the battery while it is not running.
- Air bags
The contact owns a 2012 Dodge Charger. The contact stated while driving at an undisclosed speed, the passenger's side air bag warning light illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the passenger's side seat wiring harness. The vehicle was not…
The contact owns a 2012 Dodge Charger. The contact stated while driving at an undisclosed speed, the passenger's side air bag warning light illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the passenger's side seat wiring harness. The vehicle was not repaired. The vehicle was taken to the dealer, who confirmed the diagnosis. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was 67,000.
- Engine and engine cooling › Engine › Crank/camshaft position sensor
The contact's husband owns a 2012 Dodge Charger. The contact stated that when the vehicle was started, the check engine warning light illuminated. Additionally, while driving approximately 30 MPH, the vehicle shuddered, lost motive power, and failed to accelerate as intended. The vehicle was taken…
The contact's husband owns a 2012 Dodge Charger. The contact stated that when the vehicle was started, the check engine warning light illuminated. Additionally, while driving approximately 30 MPH, the vehicle shuddered, lost motive power, and failed to accelerate as intended. The vehicle was taken to an independent mechanic where a handheld diagnostic machine retrieved DTC: P0016 (Cam and Crank shafts signals error). The vehicle was taken to the residence where the cam shaft and oil sensors were replaced. The manufacturer was not notified of the failure. The failure mileage was 170,000.
- Engine · Fuel/propulsion system · Power train
I purchased a 2012 Dodge Charger shortly after tha it just stopped working. It was perfectly fine and then it just wouldn't start. It only turned on to accessory mode. The lights ,radio,ac, ect. turned on but the vehicle did no. The brake pedal was very hard couldn't be pushed down. On the…
I purchased a 2012 Dodge Charger shortly after tha it just stopped working. It was perfectly fine and then it just wouldn't start. It only turned on to accessory mode. The lights ,radio,ac, ect. turned on but the vehicle did no. The brake pedal was very hard couldn't be pushed down. On the dashboard a red lightning bolt symbol with two parentheses appeared. I got it towed the dealership send the problem was the battery and the key fob. I picked it up it was fine and then a few days later while driving on the highway it suddenly started to lose power and completely stopped. same red lightning bolt symbol appeared.I barely made it to the side of the road. I had my son with me. It was a very scary situation our lives were in danger as well as the other drivers behind me because of the sudden decrease in speed. I had to get it towed for the second time. The dealership said that they changed the fuel pump. It was fine after that then couple weeks later I noticed the check engine light come on for about half a day then turn off. 2 Days later I went to turn it on and it did not start, same red lightning bolt symbol appeared again. I got it towed to the manufacture dealership for a recall and they did diagnostic and are telling me that it is the starter switch. They didn't mention anything about the red lightning bolt and it still doesn't turn on
- Engine · Forward collision avoidance › Automatic emergency braking
Was just driving and the engine just cut off now it want start. I carried it to a certified mechanic he said the motor locked up. He also said it's common for this 3.6 to do this. Something about stuff getting in the engine and causes the bearings to mess up and the pistons.
- Other/i am not sure
It is not staying in the proper level
- Engine
Had catastrophic engine failure at 100k miles doing 70mph. I believe it was timing chain failure. Replaced the engine with a refurbished engine and now have the exact same problem. It seems like the MDS system is the main cause for this to keep happening so why isn’t this a recall issue. These engines are not cheap to replace
- Power train
Lifter failure is causing metal shavings from the cam to fall into the engine block and cause the engine to fail. This is a known problem with these cars and nothing is being done about it by the manufacturer.
- Air bags
The contact owns a 2012 Dodge Charger. The contact received notification of NHTSA Campaign Number: 19V018000 (Air Bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2012 Dodge Charger. The contact received notification of NHTSA Campaign Number: 19V018000 (Air Bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. The contact stated that she was approached by a door-to-door representative of the manufacturer to schedule a home visit by a technician to replace the air bag inflator however, the representative never returned. Parts distribution disconnect.
- Tires › Sidewall
Purchased four Cooper Adventurer Tour P235/55R18 tires from Pep Boys Oct 2018. Drove them 19,000 miles with no road hazard incidents. I rotate tires every 5,000 miles. One tire developed a slow leak presently on the right rear side and now losing a couple psi per week. Placed the tire in a…
Purchased four Cooper Adventurer Tour P235/55R18 tires from Pep Boys Oct 2018. Drove them 19,000 miles with no road hazard incidents. I rotate tires every 5,000 miles. One tire developed a slow leak presently on the right rear side and now losing a couple psi per week. Placed the tire in a water filled wheelbarrow. Found hundreds of tiny bubbles developing around the entire sidewall where the design impressions are located. Problem is not at the bead nor at the tread. Suspect this could lead to a blowout due to a flawed manufacturing problem. Question is are the others from the same batch about to have the same problem. Have road hazard warranty but this is a tire flaw.
- Electrical system › Wiring › Fuses and circuit breakers
The contact owns a 2012 Dodge Charger. The contact stated that while the vehicle was parked, he became aware that the air conditioning system was inoperable. Additionally, the contact became aware that the 10-AMP air conditioning clutch fuse was loosened. There was no warning light illuminated. The…
The contact owns a 2012 Dodge Charger. The contact stated that while the vehicle was parked, he became aware that the air conditioning system was inoperable. Additionally, the contact became aware that the 10-AMP air conditioning clutch fuse was loosened. There was no warning light illuminated. The vehicle was taken to the dealer to be diagnosed. The contact was informed that the failure was due to the loosened air conditioning clutch fuse. The vehicle had been repaired. The manufacturer was made aware of the failure and informed the contact that the VIN was not under recall for the failure. The failure mileage was approximately 84,000
- Electrical system · Engine · Unknown or other
I am experiencing the same issue as identified with NHTSA ID NUMBER: 11525511, June 5, 2023. Dodge has a known issue with the wiring for the fuse for the a/c located in the front PDC. Technical Service Bulletin NUMBER: 08-040-14 REV. A. On or around June 2020, I took my 2012 Dodge Charger to my…
I am experiencing the same issue as identified with NHTSA ID NUMBER: 11525511, June 5, 2023. Dodge has a known issue with the wiring for the fuse for the a/c located in the front PDC. Technical Service Bulletin NUMBER: 08-040-14 REV. A. On or around June 2020, I took my 2012 Dodge Charger to my local dealership during the COVID pandemic for an issue with my AC not working. I had the car inspected by numerous mechanics who indicated there was an issue with the fuse for the a/c clutch (#12), They would replace the fuse numerous times, the AC would come on and blow warm air or cool air, but mostly warm. Replacing the fuse numerous of times did not resolve the issue. Neither did replacing all the cooling system and radiator and fan as well. My auto shop had a mechanic who specializes on the computer for cars take a look at my Charger and found technical service bulletins NUMBER: 08-040-14 and NUMBER: 08-040-14 REV. A which directly describes the issue I am experiencing with my vehicle. The mechanic has even placed a small nail in the cavity next to the fuse to hold it in its place and my AC is blowing fine and cold air until that fuse is moved or touched. This also caused issues with the fuse for the steering wheel on the car which the Dodge dealership addressed when I lost steering power on my vehicle. They did NOT repair the issue with NUMBER: 08-040-14 on my vehicle. I paid the $199.00 diagnostic fee just for the shop to put a new fuse in (which I repeatedly told them was not the issue at that time) and I am still having the same problem. I would like Chrysler/Dodge to contact Armory Dodge and authorize not only a refund for the $199.00 diagnostic fee I paid to have the issue identified (which they did not) and also authorize the repair needed as instructed on the TSB NUMBER: 08-040-14. The dealership has informed me that they do not even have the repair kit needed Part No. 68235388AA (wire harness kit) and would need to do a workaround to repair the issue.
- Electrical system · Exterior lighting · Steering
When I purchased the car it had been used as a police car in the state of Mississippi. So after I bought the car I checked for any recalls and found it to have 2 open recalls. 1 was a passenger side airbag and the other was the alternator. So I contacted Moss motor company in South Pittsburg…
When I purchased the car it had been used as a police car in the state of Mississippi. So after I bought the car I checked for any recalls and found it to have 2 open recalls. 1 was a passenger side airbag and the other was the alternator. So I contacted Moss motor company in South Pittsburg Tennessee and they agreed to do the recalls. After they had finished installing the air bag they told me the alternator wasn't required for change out because the part number listed on it wasn't warranted. So I did some investigating and found my part number to be 7030. The part numbers not required for change out is 7051-7031-and 7170.. It's listed under the NHTSA S68/16v-739 recall. Since I've had the car I have had blinking headlight issues.. I have a little bit of automobile knowledge and I knew it had to be a grounding problem or a alternator problem. So I even added a couple of grounds from the engine to the chassis with no improvement. So I contacted a good friend of mine whom is a retired Dodge Chrysler master technician and he agreed to check my alternator for fluctuating amperage. He placed a device around the lead wire coming from the alternator to the battery and when he did the needle was constantly fluctuating very rapidly probably 2/3 across the entire dial. So there is no question whatsoever the alternator is the source of the problem. There's one more issue I would like to report. When I carried my car in for the recalls to be performed the technician didn't even bother to raise the hood of the car to check the part number on the alternator.. The reason I know this is because he didn't take my car to the shop area, he pulled my car in front of the high bay doors and installed the passenger side airbag.. I did witness this.. But not 1 time did I see him raise the hood. It took me a 30x magnifying glass and a flashlight to take the photo clearly showing the part number on my current alternator that was supposed to be changed. Photo attached is part number.
- Electrical system · Power train · Unknown or other
My ac was working decent, not how it should be, when I first got the vehicle. Now, the ac just blows warm air, no recirculation for feet setting. I am getting the code P0741 and it doesn't change.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Vehicle rollaway, engine on
On April 22, 2016, Fiat Chrysler Automotive US LLC, (FCA) submitted a Defect Information Report (DIR) to NHTSA regarding a defect that could result in unattended vehicle rollaway with the engine running in approximately 811,586 model year (MY) 2012 to 2014 Dodge Charger and Chrysler 300 vehicles and MY 2014 to 2015…
On April 22, 2016, Fiat Chrysler Automotive US LLC, (FCA) submitted a Defect Information Report (DIR) to NHTSA regarding a defect that could result in unattended vehicle rollaway with the engine running in approximately 811,586 model year (MY) 2012 to 2014 Dodge Charger and Chrysler 300 vehicles and MY 2014 to 2015 Jeep Grand Cherokee vehicles equipped with 8-speed transmissions and a monostable gear selector (NHTSA Recall #16V-240, FCA Recall #S27). According to FCA's DIR, The existing strategies built into these vehicles to deter drivers from exiting the vehicle after failing to put the transmission into PARK have not stopped some from doing so. Drivers erroneously concluding that their vehicle's transmission is in the PARK position may be struck by the vehicle and injured if they attempt to get out of the vehicle while the engine is running and the parking brake is not engaged.The vehicles recalled by FCA are equipped with Monostable electronic (shift-by-wire) gearshift assemblies supplied by ZF Group (see Figure 1).The subject Monostable shifter has a single neutral position that it snaps back to when the driver releases the shift knob.Although the Monostable gearshift has the familiar appearance of a conventional console mechanical gearshift assembly, it has an unfamiliar movement that does not provide the tactile or visual feedback that drivers are accustomed to receiving from conventional shifters.Consequently, the driver must take additional time to verify that the desired gear position was achieved by checking the PRNDL display on the shift knob or the Electronic Vehicle Information Center (EVIC) display.
- Alternator failure
On July 22, 2014, the Office of Defects Investigation (ODI) opened PE14-022 to investigate 14 complaints (VOQs) alleging incidents of alternator failure resulting in engine stall while driving in model year (MY) 2011 through 2012 Dodge Charger vehicles.The MY 2011 through 2012 Dodge Charger vehicles were sold with…
On July 22, 2014, the Office of Defects Investigation (ODI) opened PE14-022 to investigate 14 complaints (VOQs) alleging incidents of alternator failure resulting in engine stall while driving in model year (MY) 2011 through 2012 Dodge Charger vehicles.The MY 2011 through 2012 Dodge Charger vehicles were sold with three different engine options:1) 3.6L V6 (VIN8 = G), 88,766 vehicles; 2) 5.7L V8 (VIN8 = T), 38,615 vehicles; and 3) 6.4L V8 (VIN8 = J), 2,406 MY 2012 vehicles.The 14 VOQs identified in the PE14-022 opening resume involve 13 vehicles with 3.6L V6 engines and 1 vehicle with unknown engine (no VIN provided).In an October 7, 2014 letter to NHTSA, Chrysler described a safety defect condition that could result in rapid alternator failure having limited or no detection in approximately 434,581 MY 2011 through 2014 Chrysler 300, Dodge Charger, Dodge Challenger, Dodge Durango and Jeep Grand Cherokee vehicles equipped with 3.6L engines and 160 amp alternators (NHTSA Recall No. 14V-634, Chrysler P60).The subject alternators are used in vehicles equipped with 3.6L V6 engines and without towing packages.According to Chrysler, the silicone diodes in the alternator rectifier bridge may experience thermal fatigue due to cyclic loading from the Electric Hydraulic Power Steering (EHPS) system, eventually resulting in no output, reduced output, or a fully shorted to ground condition.These failure modes vary in their time to failure and warning to the driver.Depending on the failure mode and timing, system voltage may drop to critically low levels, disabling systems such as the Anti-lock Brake System/Electronic Stability Control, Engine Control Module/Central Body Controller, or a total vehicle electrical system shut down (in the event of a short to ground failure mode).Analysis of complaints to ODI and Chrysler identified a total of 146 incidents of alternator failure resulting in engine stall while driving in MY 2011 through 2012 Dodge Charger vehicles, including 142 involving vehicles equipped with the 3.6L V6 engines (1.6 IPTV) that were included in 14V-634 and 4 involving vehicles with 5.7L V8 engines (0.1 IPTV), which are equipped with different alternators.Analysis of all alternator failure complaints found that approximately 48 percent of VOQs and 21 percent of Chrysler complaints involved allegations of engine stall.Many (98) complaints reported fire and/or smoke, but analysis of these determined that they involved thermal damage to the alternator diode and did not identify any incidents involving damage beyond the alternator assembly.One VOQ identified in the opening resume for PE14-022 alleged a crash, but further evaluation determined that this involved a minor rear-end impact with slight bumper damage.This investigation is closed based on Chrysler's decision to conduct a safety recall.The VOQs associated with this investigation are:10641479,10641366,10641349,10642017,10640770,10640687,10640553,10639692,10638810,10638356,10638175,10638143,10637460,10633806,10633304,10632943,10632006,10631704,10631613,10631420,10631088,10630991,10630854,10630844,10630108,10629623,10629603,10628228,10628150,10627941,10627342,10626452,10626254,10625962,10622385,10622340,10621603,10620961,10619481,10618950,10618948,10618539,10618476,10618334,10618081,10618107,10616834,10616461,10616456,10615754,10615719,10606580,10605090,10604958,10597295,10592085,10588675,10587141,10562463,10559730,10511407
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248517LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10247906ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10247905ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10241118Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10234379ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10234378ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10231971This bulletin involves replacing both the left and right side front tension struts.
- 10231970This bulletin involves replacing the left side or the right side or both side tension struts.
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10229966MIL Illumination For P0730 And Transmission Shift Enhancements
- 10229945MIL Illumination: P0300, P0302, P0304 or P0306 (X56 Warranty Extension)
- 10229899MIL Illumination: P0300, P0302, P0304 or P0306 (X56 Warranty Extension) This bulletin involves checking for excessive cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300- Multiple Cylinder Misfire P0302- Cylinder 2 Misfire P0304- Cylinder 4 Misfire P0306- Cylinder 6 Misfire
- 10229871Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
- 10229857Transmission Shift Enhancements - Adaptation Drive Learn Procedure
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229242This bulletin involves modification or replacement of the backlite rear shelf
- 10229031Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10228020Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10226286Steering Column.
- 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10223855Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
- 10223642This bulletin involves performing a USB service flash of the Hands Free Module.
- 10223641This bulletin involves performing a USB service flash of the Hands Free Module.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221813No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle
- 10221594Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10221441No Start Condition After A Fuel Pump Replacement, Multiple Fuel System Level Related DTC?s Setting
- 10221377Overhead Console If the sunglasses holder door in the overhead console will not stay closed, inspect the Latch for damage. The Latch is now released for service under part number 68599540A$.
- 10221154No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
- 10221150Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10221067MIL Illumination: P0300, P0302, P0304 or P0306 (X56 Warranty Extension) This bulletin involves checking for excessive cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300- Multiple Cylinder Misfire P0302- Cylinder 2 Misfire P0304- Cylinder 4 Misfire P0306- Cylinder 6 Misfire
- 102210358 Speed Transmission Shift Adaptation, Drive Learn Procedure This bulletin involves performing a Transmission Adaptation Learn procedure based on a subjective shift quality rating evaluation.The adaptation drive learn procedure must be performed on all 8-speed transmissions when the transmission is repaired/replaced and/or the Valve Body/TCU assembly (mechatronic) is replaced, or when the adaptation memory cells are cleared with the wiTECH diagnostic scan tool. Customers may indicate that their transmission shift quality does not meet their expectations.
Every Dodge Charger model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.