2016 Ford Taurus
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Taurus › 2016
These records cover every 2016 Ford Taurus. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2016 Ford Taurus. Newest first.
Ford Motor Company (Ford) is recalling certain 2015-2019 Flex, 2015 Explorer, Lincoln MKT, Lincoln MKZ, 2015-2016 C-Max, Escape, Taurus, 2016 Fusion, 2018-2019 Taurus, 2019 Lincoln MKT, Fiesta, and 2020 Mustang vehicles. The rearview camera may display a distorted, intermittent, or blank image when the vehicle is in reverse.
Risk and remedy
Risk
A rearview camera that fails to properly display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the rearview camera as necessary, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on October 25, 2025. Additional letters will be mailed once the final remedy is available on each phase. Mustang owner notification letters were mailed January 2, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA9. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 14, 2025.
Ford Motor Company (Ford) is recalling certain 2016-2019 Taurus vehicles. The driver and front passenger B-Pillar door trim may detach while driving.
Risk and remedy
Risk
Door trim that detaches while driving can create a road hazard, increasing the risk of a crash.
Remedy
Dealers will repair or replace the B-pillar trim as necessary, free of charge. Owner notification letters were mailed February 20, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S91.
Ford Motor Company (Ford) is recalling certain 2013-2018 Lincoln MKT and Ford Flex and Taurus vehicles with the Police Interceptor or SHO Performance Pack. The rear suspension toe links may fracture due to stress on the rear suspension.
Risk and remedy
Risk
A fractured rear toe link will cause a sudden change in vehicle handling and increase the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the rear suspension toe links, free of charge. Remedy parts are not currently available. Owners were notified about the recall on March 3, 2020. A second notice will be mailed when remedy parts become available, which is currently expected to be the end of September 2020. The recall began October 28, 2020. Owners may contact Ford customer service at 1-866-436-7332 or Lincoln customer service at 1-800-521-4140. Ford's number for this recall is 20S04.
Ford Motor Company (Ford) is recalling certain model year 2016 Ford Taurus, 2016-2017 Ford Flex, Lincoln MKT, 2017 Ford Explorer and Ford Explorer Police Interceptor Utility vehicles equipped with 3.5L GTDI engines. Improperly brazed turbocharger oil supply tubes may leak oil on engine components.
Risk and remedy
Risk
An oil leak, in the presence of an ignition source, increases the risk of a fire.
Remedy
Ford will notify owners, and dealers will inspect, and if necessary, replace the turbocharger oil supply tubes, free of charge. The recall began on January 31, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S46.
Owner complaints
87 complaints4 involved a crash1 involved a fire3 injuries
What owners report most
Latest complaints
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact stated that while reversing, the rear-view camera displayed a blank image. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The manufacturer was contacted and made aware of the failure.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V69500 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V69500 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. While reversing, the rear-view camera intermittently failed to display an image. The dealer was made aware of the failure but confirmed that parts were not yet available.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the parts needed to complete the recall repair were unavailable. The contact stated that while reversing, the rearview camera displayed an inverted image or…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the parts needed to complete the recall repair were unavailable. The contact stated that while reversing, the rearview camera displayed an inverted image or occasionally displayed a blank image. The dealer was notified of the failure by telephone and informed the contact that the parts were unavailable. The failure mileage was approximately 70,000.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to complete the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to complete the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the issue. The contact stated that the rearview camera displayed an inverted image while reversing. The failure mileage was approximately 64,000.
- Unknown or other
Ford has failed to remedy the safety recall campaign 25SA9/25v695 for my vehicle in a timely manner. A rear view camera that displays a blank or distorted image while in reverse can reduce or distort the drivers view of what is behind the vehicle, increasing the risk of a crash. Their own stated deadline has passed.
- Unknown or other
In October 2025 a recall was announced concerning the rear view camera in my vehicle. A remedy date was provided to NHTSA by Ford with a date range ending July 3 2026. As of October 07 2026 my vin is still showing remedy not available. Just last month my rear view camera has started to malfunction…
In October 2025 a recall was announced concerning the rear view camera in my vehicle. A remedy date was provided to NHTSA by Ford with a date range ending July 3 2026. As of October 07 2026 my vin is still showing remedy not available. Just last month my rear view camera has started to malfunction and most of the time it either shows a black screen a blue screen or says contact dealer. Occasionally it will work normally. Manufacturer Recall Number25SA9 and NHTSA Recall Number25v695 specifically includes this issue for my vehicle yet Ford still has no remedy available for my vehicle.
- Back over prevention › Rearview system braking
The rear-view camera on my 2016 Ford Taurus Limited intermittently malfunctions when the vehicle is placed in reverse. The displayed image flickers and sometimes appears upside down/inverted. The vehicle also sometimes produces inappropriate warning beeps while reversing. There were no warning…
The rear-view camera on my 2016 Ford Taurus Limited intermittently malfunctions when the vehicle is placed in reverse. The displayed image flickers and sometimes appears upside down/inverted. The vehicle also sometimes produces inappropriate warning beeps while reversing. There were no warning lamps or messages before the problem began. The malfunction makes the rear-view image unreliable and creates a safety risk while backing because the displayed image may not accurately represent what is behind the vehicle. I cannot safely rely on the camera to identify pedestrians, vehicles, or other obstacles. The problem has occurred repeatedly but has not yet been diagnosed or confirmed by a Ford dealer or independent repair facility. The vehicle and rear-view camera are available for inspection upon request. I am aware that NHTSA Recall 25V695 / Ford Recall 25SA9 concerns rear-view camera failures in certain 2015-2016 Ford Taurus vehicles. My vehicle exhibits similar symptoms, including an intermittent and inverted rear-view camera image. I have contacted Ford regarding the issue, and they are saying my VIN is not included. Yet, the defect is the same as what is described in the recall. I have escalated my customer service case at Ford.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while reversing, the rear-view camera displayed an inverted, distorted, or blank image. The message "Rear-view Camera Unavailable" was displayed. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 160,000.
- Unknown or other
I own a 2016 Ford Taurus Limited that is covered under Ford Safety Recall 25SA9 / NHTSA Recall 25V-695 for the rearview camera. I received the recall notification in October 2025 stating that a remedy was not yet available and that I would receive another notification once parts became available.…
I own a 2016 Ford Taurus Limited that is covered under Ford Safety Recall 25SA9 / NHTSA Recall 25V-695 for the rearview camera. I received the recall notification in October 2025 stating that a remedy was not yet available and that I would receive another notification once parts became available. Nearly 10 months later, I contacted my local Ford dealership to schedule the recall repair. I was informed that they still do not have the required parts and that no nearby Ford dealerships have them available. I also contacted Ford’s customer service line, but the automated system simply states there are no updates available for this recall. My vehicle is experiencing the exact safety defect described in the recall. When I shift into reverse, the rearview camera no longer displays an image. Instead, the screen turns completely blue, leaving me without a functioning backup camera. This is no longer a potential safety concern—it is an active failure that affects the safe operation of my vehicle when backing up. I am extremely concerned that a federally recognized safety recall remains unrepaired even though my vehicle is now exhibiting the recalled defect. Despite my efforts to have the vehicle repaired, Ford has been unable to provide the necessary parts or any estimated timeline for when the repair will be available. I respectfully request that NHTSA review Ford’s continued inability to provide a remedy for Recall 25SA9 / NHTSA 25V-695 and investigate the prolonged delay in making repair parts available to owners whose vehicles are already experiencing this safety-related failure. Thank you for your attention to this matter.
- Structure
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V611000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving at various speeds, the passenger’s side B-Pillar trim became loosened. The…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V611000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving at various speeds, the passenger’s side B-Pillar trim became loosened. The failure progressed and, upon further inspection, the passenger’s side B-Pillar trim detached, and the driver’s side B-Pillar trim became loosened. The local dealer was contacted, and the vehicle was repaired out-of-pocket. The manufacturer was not made aware of the failure. The failure mileage was approximately 156,000.
- Unknown or other
My backup camera rarely works and sometimes is upside down. It cuts in and out while backing up. There is a recall from Oct 2025 but still no fix.
- Back over prevention · Structure
The contact owns a 2016 Ford Taurus. The contact received notifications of NHTSA Campaign Numbers: 25V611000 (Structure) and 25V695000 (Back Over Prevention); however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2016 Ford Taurus. The contact received notifications of NHTSA Campaign Numbers: 25V611000 (Structure) and 25V695000 (Back Over Prevention); however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The dealer was contacted, and an appointment was scheduled with the understanding that parts had been ordered; however, while contacting the dealer a second time, it was confirmed that parts were not yet available. The manufacturer was not made aware of the issues. The contact had not experienced a failure.
- Back over prevention
The contact's wife owns a 2016 Ford Taurus. The contact's wife was notified of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while in reverse(R) on several occasions, the rearview camera displayed a…
The contact's wife owns a 2016 Ford Taurus. The contact's wife was notified of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while in reverse(R) on several occasions, the rearview camera displayed a blank image intermittently and eventually became inoperable. The vehicle was taken to a dealer, where it was diagnosed that the rearview camera had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 60,000.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image would appear blank. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention)…
The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image would appear blank. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to complete the recall repair was not yet available. The vehicle was taken to the dealer. The vehicle was not diagnosed or repaired. The dealers confirmed that the remedy parts were not yet available. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time to provide a remedy for the recall The approximate failure mileage was 29,000.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera intermittently operated; however, the image was distorted, upside down, or completely blank. The contact received notification…
The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera intermittently operated; however, the image was distorted, upside down, or completely blank. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was contacted and confirmed that the part was unavailable. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 84,000.
- Suspension
Bushing of the driver side rear toe link (aka lateral link, toe arm, etc.) separated, causing the rest of the toe link to disconnect from the tire. Images are available but the original part has been taken by the mechanic. Bushing likely failed from corrosion, though this vehicle only spent 4 of…
Bushing of the driver side rear toe link (aka lateral link, toe arm, etc.) separated, causing the rest of the toe link to disconnect from the tire. Images are available but the original part has been taken by the mechanic. Bushing likely failed from corrosion, though this vehicle only spent 4 of its 10 years in a heavily salted environment. The toe link is also intended to last the life of the vehicle and is not mentioned in the recommended maintenance per the vehicle manual. After the toe link separated control of the vehicle was lost. This occurred at a low speed (~25 mph) in a residential area so there were no injuries or property damaged. Service center has confirmed toe link failure. The vehicle and component have not been inspected by any other party. There were no signs of issue prior to the failure. A previous mechanic had indicated that the toe link was seized and could not be adjusted for an alignment but did not recommend replacement. There was no abnormal tire wear or handling of the vehicle prior to the failure. Though this could have been prevented through maintenance, there were no indicators of a failure besides the seized bolt mentioned by the mechanic. May indicate a wider issue similar to Ford's previous toe link problems.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera displayed a distorted image or a black screen…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera displayed a distorted image or a black screen intermittently while in reverse(R). The contact stated that the failure obstructed the driver's visibility, which prevented the driver from safely operating the vehicle. The message "Rear-view Camera not Available" was displayed. The local dealer was contacted and confirmed that the remedy was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 92,000.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse, the back-over prevention camera displayed a black screen. The dealer was contacted and confirmed that parts for the recall repair were not yet available. The manufacturer was not made aware of the issue. The failure mileage was approximately 48,303.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The rearview camera image was either distorted, upside down, or the image was frozen on the screen. The contact received notification of NHTSA Campaign Number: 25V695000…
The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The rearview camera image was either distorted, upside down, or the image was frozen on the screen. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available for the recall repair. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The approximate failure mileage was 64,000.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
- Electrical system · Unknown or other
I am writing to report an unresolved safety recall for my vehicle. I received Safety Recall Notice 25V695 in October 2025, and as of today, the recall has not been resolved because the required repair parts remain unavailable. This recall involves a safety-related defect, and the extended delay in…
I am writing to report an unresolved safety recall for my vehicle. I received Safety Recall Notice 25V695 in October 2025, and as of today, the recall has not been resolved because the required repair parts remain unavailable. This recall involves a safety-related defect, and the extended delay in providing a remedy raises serious safety concerns. I have contacted authorized dealerships, and I have been informed that parts are still on backorder with no estimated availability date. Given the amount of time that has passed since the recall notice was issued, I do not believe this recall has been addressed within a reasonable timeframe. The ongoing lack of an available repair increases the risk associated with operating the vehicle under normal conditions. I am requesting that this issue be reviewed to ensure the manufacturer complies with its obligation to provide a timely and effective remedy for this safety recall. Thank you for your attention to this matter.
- Back over prevention › Warnings · Seats · Unknown or other
Rearview Camara assist works then quits and the duel heat only works on the driver's side and blows cold air on the passenger side and it smells like it's getting exhaust in the car ?but the fan motor is working fine and so does the AC!
- Back over prevention · Structure
The contact owns a 2016 Ford Taurus. The contact stated that the passenger's side door exterior B-Pillar trim was detaching. Additionally, while in reverse(R), the rearview camera displayed a blue image or the message "Camera Unavailable" was displayed on the screen. The contact stated that the…
The contact owns a 2016 Ford Taurus. The contact stated that the passenger's side door exterior B-Pillar trim was detaching. Additionally, while in reverse(R), the rearview camera displayed a blue image or the message "Camera Unavailable" was displayed on the screen. The contact stated that the failure was intermittent. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention) and became aware that the VIN was also included in NHTSA Campaign Number: 25V611000 (Structure); however, the parts to do the recall repairs were not yet available. The dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was not made aware of the failures. The failure mileage was approximately 130,000.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image was unexpectedly turning on and off. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over…
The contact owns a 2016 Ford Taurus. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image was unexpectedly turning on and off. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the parts to do the recall repair were not yet available. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 60,000.
- Back over prevention
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera displays a blank or distorted image while in reverse(R).…
The contact owns a 2016 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera displays a blank or distorted image while in reverse(R). In addition, the rear-view camera image occasionally froze. The local dealer was not notified of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 49,000.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 11001174This article supersedes TSB 21-2175 to update the TSB Service Procedure. Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. related concerns including but not limited to: Display operation concerns Navigation inoperative Voice recognition concerns Phone connection issues Dropped phone connections Applink related performance Travel Link not present or showing incorrect traffic Slow system response This may be due to the SYNC software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software. NOTE: Ford has found some of the APIMs replaced and returned for inspection contained an outdated software level and the APIM did not require replacement. The customer concern may have been resolved by updating the APIM with latest level of software.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10251952For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
- 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
- 10228876Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
- 10214492Some 2015-2016 vehicles equipped with 6F50/6F55 transmission and built on 2-Nov-2015 and through 1-Feb-2016 may exhibit no reverse, 3rd and 5th gear with diagnostic trouble codes (DTCs) P0715,P0717,P0756 and/or P2701. This may be caused by the direct clutch cylinder/tone wheel (7F283) inadvertently forcing the snap ring out of position resulting in damage to the direct clutch hub (7G384). Service part (7J250) complete rotating 3-5-R clutch module is now available. Refer to Workshop Manual (WSM), Section 307-01. For claiming, use causal part 7F283 and applicable labor operations in Section 7 of the Service Labor Time Standards (SLTS) manual.
- 10205694Some 2016-2021 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit a condition where the navigation voice prompts are inoperative after a SYNC map update. This may be due to an incomplete installation of the SYNC map software. If possible, using the original USB that installed the update, reperform the update and verify the navigation voice prompts have returned. Multiple reboots are expected when this update is being performed. Verify the Installation Is Complete message displays in the touch screen. If the original USB is not available, go to website https://syncnavigation.com/ford/home or https://syncnavigation.com/lincoln/home to download the files once more for the affected vehicle. For further map update support, reference the FAQ section on these websites.
- 10205031Touchscreen navigation system - arabic language - blank screen
- 1020498749 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
- 1020498649 CFR Part 579.5 Monthly Communications - January 2016
- 10201050Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK12 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10201034Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
- 10201013Some 2016-2021 Ford or Lincoln vehicles equipped with SYNC 3 or SYNC 4 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is considered normal due to the power saving features enabled while in transport mode. It is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure exactly allowing time for the SYNC system to complete its tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
- 10198605Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns.
- 10183749In some of the affected vehicles, the front control/display interface module (FCDIM) may have been unintentionally programmed for the European market instead of the North American market
- 10180677When installing a replacement short block in 2015-2017 vehicles equipped with a 2.7L or 3.0L EcoBoost engine, the engine must be converted to use a belt driven oil pump with the following parts: left exhaust camshaft JT4Z-6250-B, left intake camshaft - JT4Z-6250-A, belt driven oil pump - KT4Z-6600-A, oil pump belt - JT4Z-6B651-A, crankshaft sprockets - FT4Z-6306-A (x2), crankshaft oil pump belt drive - JT4Z-6306-A. Follow the engine assembly procedure in Workshop Manual (WSM), Section 303-01 using these new parts without installing the chain tensioner or guides as they are not needed with the belt driven oil pump. Fill out the Authorized Modification Label (FPS-8262) with the following text: 'Engine has been modified to use a belt-driven oil pump per SSM XXXXX' and attach it to the underside of the hood.
- 10180428Some 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual (WSM), Section 303-00 General Information > Diagnosis and Testing > Engine > Engine Oil Leaks - Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards (SLTS) Manual.
- 10179117Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F150/Focus/CMAX/Edge/Fiesta/MKX/ Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.
- 10177042Some 2016-2020 Ford and Lincoln vehicles equipped with a SYNC 3 Touchscreen may experience the volume control unresponsive from the Front Control Interface Module (FCIM) and steering volume controls when using Apple Car Play. When the Apple device is removed, volume control is restored. This is due to a concern with the Waze Navigation App software and Apple iOS version. To correct the condition, update the Waze App software and iOS to the latest version available and reboot the customer's Apple device. Perform an ignition cycle and reconnect the Apple device via USB. Open Apple Car Play and confirm volume control is restored. Installing/Updating third party software/applications is not warrantable.
- 10172972SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
- 10169986Some 2015-2020 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10168810Some 2016-2019 vehicles equipped with SYNC 3 may experience a map displayed on the left half of the SYNC screen with no other information/soft buttons present after updating to the latest version of V3.0 software. This issue occurs when the SYNC 3 system has been previously modified using an aftermarket device to display the Ford GT welcome screen/HMI Theme. To correct this issue, please contact the Technical Hotline Assistance Center to have the vehicle restored back to its original state.
- 10164596Some 2013-2020 vehicles equipped with an EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function. To support the proper diagnosis of this compressor, the EVDC control valve tester has been provided to each U.S. dealership (339-EVDC100). Ensure the A/C system has a full charge prior to any compressor diagnostics. To support the proper diagnosis of this compressor, the EVDC compressor tool must be used, and the results recorded in the Technician comments field with the warranty claim. This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10164497For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
- 10163573Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Use pigtail harness service part numbers 3U2Z-14S411-ZEA or CU2Z-14S411-FA, as both parts are interchangeable. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures.
- 10162087Some 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM,Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual. Section
- 10162086Some 2015-2017 F-150/Mustang, 2015-2018 Edge/MKC, 2016-2018 MKX, 2013-2018 Explorer/Taurus/Flex/MKT, and 2017-2018 Fusion/MKZ/Continental vehicles built on or before 19-Oct-2017 may exhibit an inoperative adaptive cruise control, collision warning, and/or collision avoidance system with a Pre-Collision Assist Not Available, Collision Warning Not Available, and/or Adaptive Cruise Fault message present in the instrument panel cluster (IPC) and diagnostic trouble code (DTC) U3000:49 present in the cruise control module (CCM). To resolve the condition, reprogram the CCM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 9E731 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 101609362015-2016 Edge/MKX/Flex/MKT/MKZ/MKS/Taurus/Taurus Police/Explorer/Explorer Police vehicles built on or before 10-Jun-2016 and equipped with a 3.5L or 3.7L engine, all wheel drive (AWD) and a power transfer unit (PTU) may exhibit a PTU venting, an odor originating from the PTU, or noise originating from the PTU. These vehicles may be a candidate for rebuild using PTU Idler Gear/Shaft/Bearing Kit (GB5Z-7P258-A). Refer to Workshop Manual (WSM), Section 308-07.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10160880Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10159494SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10159489Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10156887Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
- 10156877Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
- 10156869Some 2011-2019 Taurus/Police Interceptor Sedan vehicles may exhibit a loose and/or sagging headliner near the high mounted stoplamp. This may be caused by the headliner mounting bracket separating from the headliner. To resolve the condition, reapply adhesive to the headliner mounting bracket.
- 10155575Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement. For claiming, use causal part 15604 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
- 10155565Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
- 10155557Some 2011-2019 Taurus/Police Interceptor Sedan vehicles may exhibit a loose and/or sagging headliner near the high mounted stoplamp. This may be caused by the headliner mounting bracket separating from the headliner. To resolve the condition, reapply adhesive to the headliner mounting bracket.
- 10153969Some 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.
Every Ford Taurus model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.