2022 GMC Canyon

Recalls

1 recall names the 2022 GMC Canyon. Newest first.

• Seats › Critical fasteners

  May 26, 2022NHTSA 22V3750001,631 vehicles

  General Motors, LLC (GM) is recalling certain 2022 GMC Canyon and Chevrolet Colorado vehicles equipped with a manual passenger seat. The front passenger seat may have a hook attachment that was not properly welded, allowing it to separate from the inboard track of the seat frame.

  Risk and remedy

  Risk

  An improperly welded seat frame may not properly restrain the seat occupant, increasing the risk of injury in a crash.

  Remedy

  Dealers will inspect the front passenger seat and replace the cushion frame, if necessary, free of charge. Owner notification letters were mailed July 6, 2022. Owners may contact GMC customer service at 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N222368320.

  Full recall details →

Owner complaints

What owners report most

1. Electrical system14
2. Steering6
3. Power train5
4. Unknown or other4
5. Fuel/propulsion system3
6. Engine2
7. Structure2
8. Back over prevention2
9. Air bags2
10. Lane departure2

Latest complaints

• Oct 26, 2026MD
  Electrical system

  Stereo touch screen goes black and stops working intermittently.

• Oct 6, 2026WA
  Electrical system
  Could not turn the ignition key off beyond the Accessory position in order to turn the key completely off to remove the ignition key. The key would stick in the ON oor Accessory position. The problem was in the microswitch button on the console shifter, the front button is pushed in to enable…

  Could not turn the ignition key off beyond the Accessory position in order to turn the key completely off to remove the ignition key. The key would stick in the ON oor Accessory position. The problem was in the microswitch button on the console shifter, the front button is pushed in to enable shifting into the PARK position. This is a safety concern due to not being able to turn off the ignition and also to not remove the key from the ignition. The repair was done by the dealer, a control unit in the shifter was replaced to correct the problem. Part cost was $525, labor was $225.73. This is a class problem on Chevrolet Colorado and GMC Canyon trucks. There should be a recall on this problem.

• Sep 11, 2026VA
  Unknown or other
  Having problems removing the key from the ignition. We checked and there have been reported problems pertaining to the shifter assembly needing to be replaced. GM has not issued any recalls about this issue but they have put out bulletins regarding the problem. We are currently waiting to hear from…

  Having problems removing the key from the ignition. We checked and there have been reported problems pertaining to the shifter assembly needing to be replaced. GM has not issued any recalls about this issue but they have put out bulletins regarding the problem. We are currently waiting to hear from the dealer on a quote as they told us there is no recall and we will be responsible. The vehicle doesn't even have 44,000 miles on it.

• Aug 22, 2026FL
  Electrical system · Power train
  The ignition key gets stuck in the ignition after shutting off the car. The key may not be removed from the ignition. The failure of the transmission shift control mechanism directly impacts the safe, mechanical operation of the vehicle's powertrain and transmission park-lock functions. The vehicle…

  The ignition key gets stuck in the ignition after shutting off the car. The key may not be removed from the ignition. The failure of the transmission shift control mechanism directly impacts the safe, mechanical operation of the vehicle's powertrain and transmission park-lock functions. The vehicle was taken to a local GM dealer and the problem was recreated. This is a known problem with the transmission shift control assembly for several model years (2020 - 2023). Also, there was a previous class action lawsuit (Jefferson & Riley class action settlement) which specifically covered a predefined list of early-generation model years (including the 2017–2019 GMC Acadia, 2019 Chevy Blazer, and 2016–2019 Malibu/Traverse/Volt). GM continued using similar microswitch shifters in newer vehicles like your my 2022 Canyon. I had no prior warning lamps but the symptoms occurred infrequently after I purchased the vehicle on March 29, 2023. I am the original owner of the vehicle and in July 2026 the problem became frequent - on an almost daily basis. I took the vehicle to my local GM dealer and I was initially told to use my spare key and see if that fixes it. In August 2026, I took it back to the GM dealer and insisted that a diagnostic be done, at which time they agreed that the transmission shift control assembly was faulty. My concern is that GM continued to use the same defective part in newer GM vehicles even though this part was previously determined to be defective in the Jefferson & Riley class action settlement.

• Jul 28, 2026VA30,000 mi
  Electrical system › Ignition
  The contact owns a 2022 GMC Canyon. The contact stated that while the gear shifter was shifted to park(P), the contact was unable to remove the key from the ignition switch. The contact stated that after turning the steering wheel to the right in a certain way, the key was able to be removed from…

  The contact owns a 2022 GMC Canyon. The contact stated that while the gear shifter was shifted to park(P), the contact was unable to remove the key from the ignition switch. The contact stated that after turning the steering wheel to the right in a certain way, the key was able to be removed from the ignition switch. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure, and a complaint was filed. The failure mileage was approximately 30,000.

• May 26, 2026CA
  Electrical system · Power train · Unknown or other
  2022 GMC Canyon AT4 Crew Cab. After the vehicle is shifted into Park and the engine is shut off, the ignition key cannot be removed from the cylinder. The key is physically locked, the steering wheel will not lock, and the vehicle cannot be reliably secured. The only workaround is to restart the…

  2022 GMC Canyon AT4 Crew Cab. After the vehicle is shifted into Park and the engine is shut off, the ignition key cannot be removed from the cylinder. The key is physically locked, the steering wheel will not lock, and the vehicle cannot be reliably secured. The only workaround is to restart the engine and cycle the shifter repeatedly until the interlock releases the key. Recurring. Safety implications: operator cannot reliably power the vehicle off in an emergency, cannot lock the steering column, and may be forced to leave an unattended vehicle in accessory mode — fire, electrical, and theft risk. The defect is documented in GM's own literature. GM Bulletin PI1429 and GM TSB 19-NA-206 address this exact symptom on the Canyon/Colorado platform. NHTSA-archived GM TSB MC-10113734 (March 2015), "Ignition Key Cannot Be Removed and/or Does Not Rotate to the 'Off' Position," names the 2015 GMC Canyon and Chevrolet Colorado. The 2022 Canyon uses the same shifter and ignition-interlock architecture. Documented cause: failure of the transmission control lever microswitch that signals "Park" to the interlock solenoid. Documented fix: replace the shifter assembly. Reported to an authorized GMC dealer while still under the New Vehicle Limited Warranty. Dealer recorded the concern verbatim — "key stays locked in ignition when shifting to Park" — and closed it "unable to duplicate," no repair, despite the open bulletins. A second GMC dealer later refused to inspect, with the service advisor stating on the service drive that there is no fix, that they see this on Canyons and Colorados all the time, and that he had seen another such vehicle the day before. No diagnostic, no repair order. GM's Technical Assistance Center has since taken the position that the bulletins above do not apply to this vehicle, which is inconsistent with the bulletins themselves. No crash, no injury, no fire. Reporting a manufacturer-documented ignition-interlock defect GM is refusing to repair.

• Mar 23, 2026OH
  Back over prevention › Warnings · Electrical system

  At various times key can not be removed from the ignition. I understand this to be a common problem on these trucks, but dealer does not agree.

• Feb 12, 2026IN39,500 mi
  Back over prevention · Electrical system › Instrument cluster/panel
  The contact owns a 2022 GMC Canyon. The contact stated that after starting the vehicle, the instrument cluster failed operate as designed and the speedometer, tachometer, fuel gauge, and turn signals failed to display as intended. The contact stated that a message to service several systems was…

  The contact owns a 2022 GMC Canyon. The contact stated that after starting the vehicle, the instrument cluster failed operate as designed and the speedometer, tachometer, fuel gauge, and turn signals failed to display as intended. The contact stated that a message to service several systems was displayed. The radio screen was blank, and the back over prevention system was inoperable. The vehicle was taken to the local dealer to be diagnosed, and it was determined that several software updates were needed; however, it was then determined that all the software was up to date. A software refresh was performed, and the vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was 39,500

• Jan 26, 2026WI
  Air bags
  To Whom It May Concern, This letter is submitted to report a safety-related defect involving an airbag sensor failure on a 2022 GMC Canyon. The vehicle experienced a failure of an airbag sensor that is part of the Supplemental Restraint System (SRS). The sensor is required for proper airbag…

  To Whom It May Concern, This letter is submitted to report a safety-related defect involving an airbag sensor failure on a 2022 GMC Canyon. The vehicle experienced a failure of an airbag sensor that is part of the Supplemental Restraint System (SRS). The sensor is required for proper airbag deployment and system readiness. Failure of this component compromises the operation of the airbag system and presents a potential safety risk to vehicle occupants. The failure occurred on a vehicle approximately four years in service and was diagnosed as an airbag sensor defect. The sensor assembly includes an integral gasket, and the failure of that gasket resulted in sensor malfunction and airbag system fault indications. General Motors and the administrator of the GMC Platinum Protection Plan were notified of the defect. Coverage for the repair was refused on the basis that a component of the sensor assembly was allegedly excluded, despite the fact that the gasket is integral to the sensor and the failure affects a federally regulated safety system. As a result of this refusal, a safety-related defect involving an airbag system was not repaired. The matter was treated as a contractual coverage issue rather than addressed as a potential defect impacting occupant protection. This submission is intended to notify NHTSA of a failure involving an SRS component that may affect other similarly manufactured vehicles. An airbag sensor failure raises concerns regarding component durability, system reliability, and compliance with applicable Federal Motor Vehicle Safety Standards (FMVSS). This complaint is submitted for logging, review, and any action the Office of Defects Investigation deems appropriate.

• Jan 22, 2026AL
  Unknown or other
  I have been dealing with a sweet/Christmas-like smell in my car occasionally for the last several months. This is a health & safety concern for me involving ethylene glycol fumes in the cabin. These fumes could be linked to why I have experienced increased sinus headaches over the past several…

  I have been dealing with a sweet/Christmas-like smell in my car occasionally for the last several months. This is a health & safety concern for me involving ethylene glycol fumes in the cabin. These fumes could be linked to why I have experienced increased sinus headaches over the past several month. I took it into CarMax (where I purchased the vehicle) and they were able to diagnose the issue and state that my heater core needed to be replaced. However, since my vehicle was under 36,000 miles, it needed to go to the dealer. The dealer that has been working on the vehicle is Hendrick Hoover Chevrolet. I have taken the vehicle to the dealer twice already and they have not been able to diagnose it the same as CarMax nor recreate the smell. Both times I have picked up the vehicle, I smelled the same thing within 1 day of having the vehicle back. Today (1/22/26) I took the vehicle back to CarMax to have them take it to the dealer for the THIRD because I have not only smelled the same smell, I have 2 new issues that need to be addressed. They are not the reason for this complaint, however. But for documentation purposes, it involves servicing the safety restraint system and error codes P0018 and P0021. I do not have any records of the first time I took the vehicle to CarMax/Dealer in November of 2025, but I have attached the records from the latest visit where I dropped the vehicle off on 12/10/25 and picked it up on 1/14/26.

• Dec 9, 2025FL
  Electrical system · Forward collision avoidance · Service brakes, hydraulic
  The contact called on behalf of her son who owned a 2022 GMC Canyon. The contact stated while her son was driving at an undisclosed speed, the brake pedal was depressed, and the brakes failed to engage. Additionally, the infotainment screen was inoperable. The front camera module warning light was…

  The contact called on behalf of her son who owned a 2022 GMC Canyon. The contact stated while her son was driving at an undisclosed speed, the brake pedal was depressed, and the brakes failed to engage. Additionally, the infotainment screen was inoperable. The front camera module warning light was illuminated. The vehicle was taken to an independent mechanic where it was diagnosed and determined that the front camera module needed to be replaced. The dealer made the contact aware of NHTSA Campaign Number: 24V133000 (ELECTRICAL SYSTEM, FORWARD COLLISION AVOIDANCE); however, the VIN was not included in the recal. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was unknown.

• Jun 9, 2025SC
  Unknown or other

  The ignition key intermittently will not extract. I'm seeing a number of complaints on-line regarding this. I have to often restart the truck back up or forward, turn the steering wheel hard left and right, then put in park to extract the key. I believe this is a danger as you would have to leave the key in the ignition of you cannot extract it. This happens multiple times a week.

• Jan 29, 2025FL
  Steering
  After driving vehicle and parking vehicle turn key off key will not turn all the way off to pull key out of ignition switch. The vehicle had 35,750 miles when brought to dealership I had told them this has happened multiple times I had to restart vehicle move vehicle shift vehicle manually or drive…

  After driving vehicle and parking vehicle turn key off key will not turn all the way off to pull key out of ignition switch. The vehicle had 35,750 miles when brought to dealership I had told them this has happened multiple times I had to restart vehicle move vehicle shift vehicle manually or drive around block park again and then key would turn all the way off and come out, When I was contacted from the GMC dealership they said they could not duplicate the problem but I have paperwork from them and the mileage during drop off which was 35,750 miles and pickup at 35,751 miles I also told them to drive the truck it is not going to happen sitting in the dealership parking lot but they only went 1 mile, The warranty for this problem will be up at 36,000 miles. I drove the vehicle 8 miles from the dealership to my house no problems drove another drove another 6 miles to the car wash and went through the car wash went to park to vacuum and wipe exterior the key would not turn all the way off stuck in the accessory position had to back up and move vehicle to another spot park and then the key turned all the way off so I could get key out

• Dec 25, 2024AR
  Electrical system · Engine · Fuel/propulsion system

  Error code p0494 conducted upon check engine light coming on.

• Dec 25, 2024MI
  Electrical system · Fuel/propulsion system

  The ECU electric control model has now burned up 3 times and the dealership just keeps replacing it the only thing they keep saying not to fill up the gas tank all the way? The gas gauge just goes dead

• Dec 12, 2024CT
  Power train

  At first start the first gear slips this has been going on for 2 years. Is been serviced 3 times and no one seems to know what the problem is. The services tech did discover the issue but couldn't figure out what the problem is. I only have 19,000 mile and its on warranty I'm hoping this matter can be resolved. Thanks, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Oct 28, 2024AZ
  Fuel/propulsion system
  The fuel gauge on the vehicle does not appear to read accurately. The distance to empty reading varies on every refuel regardless if the same amount of fuel is filled in the vehicle. I believe this is a safety issue because a driver can run out of gas causing an accident due to inaccurate fuel…

  The fuel gauge on the vehicle does not appear to read accurately. The distance to empty reading varies on every refuel regardless if the same amount of fuel is filled in the vehicle. I believe this is a safety issue because a driver can run out of gas causing an accident due to inaccurate fuel gauge readings. I’ve taken to the dealership and have been told they cannot reproduce the complaint and it remains defective. I’m hoping if others experience the same complaint then a recall may be activated.

• Oct 13, 2024CA
  Lane departure › Assist · Lane departure › Warning · Steering
  While driving out of a parking lot, my power steering stopped working and I had to regain control to manually steer the vehicle. After stopping and turning off the engine to check the serpentine belt, the power steering came back on, but the lane departure assist function was no longer working. It…

  While driving out of a parking lot, my power steering stopped working and I had to regain control to manually steer the vehicle. After stopping and turning off the engine to check the serpentine belt, the power steering came back on, but the lane departure assist function was no longer working. It appears to be the same problem that some of the 2015 and other GMC Canyon models had. Took it to my GMC dealer for warranty evaluation.

• Aug 12, 2024TX
  Electrical system
  Key gets stuck in ignition when attempting to turn off vehicle. This leaves people stranded with their vehicles in hot/cold weather, dangerous areas, etc... Many people have been bypassing this problem by removing steering column and disconnecting a wire that allows the key to be released. But…

  Key gets stuck in ignition when attempting to turn off vehicle. This leaves people stranded with their vehicles in hot/cold weather, dangerous areas, etc... Many people have been bypassing this problem by removing steering column and disconnecting a wire that allows the key to be released. But disconnection of said wire allows the key to be removed and shut off at any time, including driving down the highway at 70mph, serious safety hazard for driver and those on the road. Dealer has confirmed this issue and currently working on repairing my vehicle but it is a widespread issue with certain GM vehicles to include the canyon, colorado, camaro, and equinox.

• Jun 30, 2024CT
  Electrical system · Steering
  Service Power Steering, Drive with care warning comes on, vehicle looses all power steering. First time it happen was around November 2023. This will happen randomly, at various speeds, sometimes going straight, sometimes turning. Power steering will come back after a few minutes sometimes, a few…

  Service Power Steering, Drive with care warning comes on, vehicle looses all power steering. First time it happen was around November 2023. This will happen randomly, at various speeds, sometimes going straight, sometimes turning. Power steering will come back after a few minutes sometimes, a few times vehicle had to be turned off for a hour, but was out for over 3 days one time. During that incident we ran OBD scanner, C0800 code was showing for Power Steering Control Module, recommended repair was the replace battery, even though the battery was good. We went ahead and replaced the battery anyways, issue was not immediately resolved but after running the truck for an hour and then going for a test drive power steering returned a mile down the road. That was around May 11th. Issue hadn’t returned until today, June 22nd where it’s went on and off a handful of time before totally loosing power steering for over 5 hours now. 2015 model years had an issue the power steering rack wiring, dealer said they assume it could be same issue. Connections to the steering rack where check and corrosion was found but they won’t fix because it’s not a recall even though it’s the same corrosion issue the 2015 models had.

• Jun 3, 2024VA36,746 mi
  Electrical system › Ignition
  The contact owns a 2022 GMC Canyon. The contact stated that while attempting to start the vehicle, the contact became aware of a failure by removing the key from the ignition. The contact stated that in 15 to 20 minutes he was able to remove the key. The contact had to restart the vehicle several…

  The contact owns a 2022 GMC Canyon. The contact stated that while attempting to start the vehicle, the contact became aware of a failure by removing the key from the ignition. The contact stated that in 15 to 20 minutes he was able to remove the key. The contact had to restart the vehicle several times and switch gears until the key was removed. There was no warning light illuminated. The vehicle was taken to the dealer where the diagnostic result was undisclosed. The contact was informed that the ignition switch needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHSTA Hotline for assistance. The failure mileage was approximately 36,746.

• May 24, 2024PA14,000 miCrash1 injury
  Air bags
  The contact owns a 2022 GMC Canyon. The contact stated that while driving at 45–50 MPH, he was blinded by the sun and crashed into the rear of a 2010 Volkswagen Jetta. The air bags did not deploy. The contact noticed that the service air bag message was displayed on his app after the crash. The…

  The contact owns a 2022 GMC Canyon. The contact stated that while driving at 45–50 MPH, he was blinded by the sun and crashed into the rear of a 2010 Volkswagen Jetta. The air bags did not deploy. The contact noticed that the service air bag message was displayed on his app after the crash. The contact sustained injuries to his head and cervical spine, and medical attention was provided. A police report was filed. There was no reported fire. The vehicle was towed to a tow lot. The local dealer was not contacted. The manufacturer was not notified. The failure mileage was approximately 14,000.

• May 14, 2024NJ14,424 mi
  Steering
  The contact owns a 2022 GMC Canyon. The contact stated that while driving approximately 5 MPH and making a right turn, the steering wheel became inoperable. The service power steering message was displayed. There were no warning lights illuminated. The vehicle was towed to the local dealer, where…

  The contact owns a 2022 GMC Canyon. The contact stated that while driving approximately 5 MPH and making a right turn, the steering wheel became inoperable. The service power steering message was displayed. There were no warning lights illuminated. The vehicle was towed to the local dealer, where it was diagnosed that there was water intrusion into the electrical connector. The vehicle was repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 14,424.

• Apr 4, 2024CT
  Power train

  8 Speed auto transmission slipping on first gear. Truck was serviced on 2 attempts with know resolution and still currant.

• Jan 29, 2024NC
  Electrical system · Engine · Steering

  The truck smokes constantly, dash board faulty frame has a problem I suspect the engine head gasket is blown radio constantly needs adjusting seats look as if they may be separating from the floor terrible fuel consumption gear shift sticks and more and battery charging problem

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11011996This service bulletin provides diagnostic/repair information to correct a customer concern of Cellphone not Charging or USB Receptacle Inoperative.
• 11011989This service bulletin provides information on the harmful effects of ethylene glycol in transmission fluid.
• 11011900This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
• 11011805This Preliminary information communicates a GM part number forreflective high temperature heat or insulating tape when repairing wiring harnesses.
• 11011782This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
• 11011779This preliminary information discusses potential for a code C0010.5A to store in the brake controller which appears to be setting falsely or is induced by the customer.
• 11011709This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
• 11011704This informational bulletin provides technicians and dealership personnel with spray-in bed liner general information and repair procedures.
• 11011444This Preliminary information communicates to the dealer a process for accessing the procedure to add attachments to a GM technical assistance case using the dealer case management tool.
• 11011436This Preliminary information communicates for Technicians installing a Service Replacement Transmission Assembly to contact Technical Assistance to make sureunit is not suspect of a snap ring concern prior to installation.
• 11011420This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
• 11011406This Preliminary information communicatesa "Forward Collision System Reduced" message displayed on the DIC when theForward Automatic Braking has been set to the "Alert" setting. This is normal when theFAB has been set to "Alert".
• 11011367This informational bulletin provides a guide on how to diagnose and test for vibrations utilizing the PicoScope.
• 11011205This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules.
• 11010901This bulletin provides a procedure on how to check for a battery drain utilizing the Picoscope and how to measure the load on the system that may be causing a drain.
• 11010576This service bulletin provides information on All hazmat parts being returned to the Warranty Parts Center (WPC) must be shipped using Central Transport. Hazardous materials should never be sent by air transportation to the WPC.
• 11010546This informational bulletin provides technicians and dealership personnel with spray-in bed liner general information and repair procedures.
• 11010545This service bulletin provides information on key code security rules and information on GM keycode look-up applications (U.S).
• 11010495This bulletin provides information on Warranty Administration Required Operating Procedures - 8 Points (U.S. Only).
• 11010493This warranty administration service bulletin provides information about GM Accessories - Dealer-Installed, Repaired or Replaced During Warranty Coverage Period.
• 11010492This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories.
• 11010491This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
• 11010490This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 11010488This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program.
• 11010421This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
• 11009764This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
• 11009760This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships.
• 11009756This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
• 11009532This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 11009531This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 11009170This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
• 11009156This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
• 11009088This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
• 11009039This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
• 11009037This service bulletin provides information on Enhancing Field Product Reports with Digital Pictures.
• 11008986This Preliminary information communicatesdirection and examples when diagnosing multiple DTCs, one of which includes U**** Byte 71 DTC.
• 11008966This technical bulletin provides a procedure for the techs to replace the forward check ball and separator plate if found the cause of the customers concern of No Forward Gear When Shifting from Park to Drive and/or Reverse to Drive.
• 11008964This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions.
• 11008956This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
• 11008906This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.

Every GMC Canyon model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.