2002 Lexus RX
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2002 Lexus RX. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
12 complaints3 involved a crash2 injuries
What owners report most
Latest complaints
- Unknown or other
I want to raise concern about the safety issue and health issues relating to the new LED headlights on cars now. In the morning and evenings, I regularly encounter these extremely bright headlights. It's a big distraction and my driving visual field is impacted by these lights. I would like to see…
I want to raise concern about the safety issue and health issues relating to the new LED headlights on cars now. In the morning and evenings, I regularly encounter these extremely bright headlights. It's a big distraction and my driving visual field is impacted by these lights. I would like to see this addressed and resolved! Please advise. Sincerely, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags
The contact owns a 2002 Lexus RX300. The contact stated while driving at various speeds, the air bag warning light flashed on the instrument panel. Neither the dealer nor the manufacturer was notified of the failure. The vehicle was not yet diagnosed or repaired. The failure mileage was approximately 190,000.
- Fuel/propulsion system
The system component that malfunctioned was the Fuel Tank Overfill Check Valve, also referred to the Rollover Valve located in the top of the gas tank. The valve is suppose to prevent any fuel purging or fuel leaking during a rollover accident. Unfortunately, the valve can malfunction during…
The system component that malfunctioned was the Fuel Tank Overfill Check Valve, also referred to the Rollover Valve located in the top of the gas tank. The valve is suppose to prevent any fuel purging or fuel leaking during a rollover accident. Unfortunately, the valve can malfunction during normal refueling without the owner being aware. For a few years, I have been smelling fuel fumes during and after refueling. I would sometimes discover a pool of raw fuel under the gas tank and charcoal canister during/after refueling and up to 12 miles later. The vehicle started hesitating, missing and actually stalling after refueling. Three professional mechanics couldn't solve the problem. In an attempt to eliminate this safety issue, I replaced the gas tank, gas filler tube, fuel vapor purge valve and charcoal canister. I finally discovered a tube from the malfunctioning Overfill Valve was sending raw fuel directly to the charcoal canister, filling the charcoal canister and ultimately overflowing onto the ground outside of the vehicle. I decided to cut a hole in the vehicle floor under the rear seat and replace the Fuel Tank Overfill Check Valve. The design of the replacement valve was different from the original and incorporated a float type check valve rather than just the simple diaphragm in the original. Maybe Toyota/Lexus quietly redesigned the valve, but all owners should be aware of the redesign and the vehicles should be recalled. Thousands of these vehicles are still on the road because people love them. These vehicles and the valves are aging and failing. Dangerous fire potential certainly exist. One previous owner did have this problem, I believe, and his vehicle burned to the ground. It's an extreme safety issue not just because of the hesitating/stalling in traffic after refueling, but mostly because of the raw fuel leaking from the charcoal canister under the vehicle right in the immediate vicinity of the hot exhaust and the gas tank.
- Tires
4 new tyres were installed by Firestone but driver side wore out despite balancing rotation, alignment performed during install. TyrePlus sister concern replaced with new tyre and prorated as the tyre was at fault. Same tyre blew out on the road. The tread, side all etc damaged the wire harness and…
4 new tyres were installed by Firestone but driver side wore out despite balancing rotation, alignment performed during install. TyrePlus sister concern replaced with new tyre and prorated as the tyre was at fault. Same tyre blew out on the road. The tread, side all etc damaged the wire harness and car went out of control causing damage to suspension and fuel tank. Fuel began to leak. Car is toatled due to several other damages. TyrePlus does not want to take ownership. However they have all records of up to date maintenance. They referred me to Bridgestone wherein I need to submit 2 estimates. Tyre purchase dates maintenence etc. I have secured the tread and parts of the tyre which blew out and they want me to submit that. I am hesitatnt to submit it as they may tamper with the proof I have to fix it.
- Power train · Vehicle speed control
Transmission wouldnt shift all of the sudden on the high way no prior mechanical issues was t boned and broke my leg abs and trac off lights mechanic says total transmission failure 121000 miles and this is the second owner of this vehicle
- Unknown or other
Vehicles retractable antenna stopped retracting and antenna motor continues to run trying to pull the telescoping antenna back down. Vehicle was stationary, engine had been shut down and keys removed, but antenna motor kept running.
- Engine
Check engine light kept coming on. Took to dealership and they said they repaired problems. Was accelerating from stop light on busy city street, highway frontage road and engine died in middle of intersection causing no power or steering and had to come/coast to final stop with no power or…
Check engine light kept coming on. Took to dealership and they said they repaired problems. Was accelerating from stop light on busy city street, highway frontage road and engine died in middle of intersection causing no power or steering and had to come/coast to final stop with no power or steering capabilities. Engine died and would not restart. Car was disabled under highway bridge in busy intersection. Could not get it started. drivers would turn left from the light and almost rear end me because I was disabled right after the turn. Turned out to be the infamous toyota recall and class action lawsuit of engine sludge. Paid $6000 to repair all car components affected by the lawsuit.
- Power train
I was out of town I was driving, nothing was wrong with my RX at all. It's a 2002 lexus RX 300, then all of the sudden I go to take off at the stoplight and it was hesitating to take off. My transmission IS now completely gone. No warning at all. If I take my vehicle over 35 mph IS jerks.…
I was out of town I was driving, nothing was wrong with my RX at all. It's a 2002 lexus RX 300, then all of the sudden I go to take off at the stoplight and it was hesitating to take off. My transmission IS now completely gone. No warning at all. If I take my vehicle over 35 mph IS jerks. Transmission slips at stop lights, (with no incline). 115000 miles, and the tranny goes out. I do believe it has been replaced before I purchased the car as well. Great job lexus, not. I thought going with a lexus I would have a quality vehicle. Man was I wrong. *tr
- Power train › Automatic transmission
TL* the contact owns a 2002 lexus RX. The contact stated that the transmission gears would become stuck. The vehicle was taken to the dealer and the contact was advised that the transmission would need replacing. The vehicle was not under recall. The manufacturer was contacted who stated that they…
TL* the contact owns a 2002 lexus RX. The contact stated that the transmission gears would become stuck. The vehicle was taken to the dealer and the contact was advised that the transmission would need replacing. The vehicle was not under recall. The manufacturer was contacted who stated that they would contact the dealer for more information on the failure before making a decision if they could assist. The vehicle was not repaired. The failure mileage was 60,000.
- Air bags › Side/window
A car crashed into side door of passenger and side air did not inflate in my 2002 lexus RX 300. My car was then in a roll over and no other air bags deployed including the driver side air bag. *tr
- Power train › Automatic transmission
Dt*: the contact stated that while driving at 5 mph, there was a lack of responsiveness in the vehicle while depressing the accelerator. the vehicle did not move when the accelerator was depressed. the vehicle was taken to a service dealer, where the dealer determined that the transmission had failed, but was unable to determine the cause.
- Power train › Automatic transmission
Vehicle was parked with transmission in park and emergency brake engaged. while unattended the vehicle started moving forward slowly, I (the driver) jumped into front seat to apply the foot brake and pedal went to floor (no brakes!) vehicle could not be stopped and ran in to the wall of my garage. *jb
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11003648The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003643Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003642Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003641Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 11003593The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003588Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003587Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003586Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 10214355Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
- 10207945POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10205383Spots in Window Glass - vehicle exterior
- 10205352Windshield Wiper Blade Maintenance and cleaning
- 10205346Auto matic Transmission Replacement kPrecautions
- 10205331Immobilizer and Smart Key Reset
- 10205329Immobilizer and Smart Key Reset.
- 10205327Techstream ECU Flash Reprogramming Procedure.
- 10179697TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10179601TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10177780TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
- 10176283Safety Recall and Service Campaign - Technician Certification Requirements
- 10174889TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
- 10174888TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
- 10164328TSB: REVISION NOTICE July 01, 2019 Rev1: G1668 Applicability has been updated to include 2019 ? 2020 model year Lexus vehicles. G2158 The Techstream Preparation and Process Overview sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit
- 10133657TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.
- 10133651TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Lexus vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
- 10132625TSB: Revision Notice: Applicability section has been updated to include 2016-2017 applicable model year Lexus vehicles. The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10132074Beginning in 1998, Lexus introduced side airbags as optional equipment. Lexus does NOT recommend replacement of original seat covers with non-Lexus leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Lexus may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Lexus leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Lexus strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Lexus strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
- 10129210TSB: OBSOLETE NOTICE January 22, 2018: This bulletin is now obsolete. Please see L-SB-0001-18.
Every Lexus RX model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.