2014 Mazda CX-9
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › CX-9 › 2014
These records cover every 2014 Mazda CX-9. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2014 Mazda CX-9. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began November 9, 2018. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 1317F.
Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31…
Risk and remedy
Risk
If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.
Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting.
Risk and remedy
Risk
Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will replace both the left and right lower control arms, free of charge. The recall began on September 14, 2015. The recall will begin with model year 2007-2009 vehicles registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, Washington D.C., West Virginia, and Wisconsin. The second phase will be for model year 2010-2014 vehicles in the same states. Finally, all remaining vehicles will be remedied. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 8515G.
Owner complaints
54 complaints1 involved a crash1 involved a fire
What owners report most
Latest complaints
- Suspension
The contact owns a 2014 Mazda CX-9. The contact stated while driving at various speeds, the vehicle was drifting to either side. There was no warning light illuminated. The contact had to forcefully grip the steering wheel to avoid losing control of vehicle. The vehicle was taken to an independent…
The contact owns a 2014 Mazda CX-9. The contact stated while driving at various speeds, the vehicle was drifting to either side. There was no warning light illuminated. The contact had to forcefully grip the steering wheel to avoid losing control of vehicle. The vehicle was taken to an independent mechanic, and it was discovered that there was severe corrosion around the front suspension ball joints. Upon investigation, the contact discovered NHTSA Campaign Number: 15V451000 (Suspension); however, the VIN was not included in the recall. The dealer was notified of the failure and the contact was provided an estimate for a diagnostic test. The manufacturer was notified of the failure and the contact was provided a case number. The vehicle was not repaired. The failure mileage was approximately 95,000.
- Engine · Fuel/propulsion system · Power train
I purchased a 2014 Mazda CX-9 back in May of 2020 w/ roughly 60k on the dash. Literally 7 months later w/ about 72k on the dash, the day after Christmas I was driving to work (I worked in the next state over) on the highway my car just shut down. No warnings, no check engine lights NOTHING! It just…
I purchased a 2014 Mazda CX-9 back in May of 2020 w/ roughly 60k on the dash. Literally 7 months later w/ about 72k on the dash, the day after Christmas I was driving to work (I worked in the next state over) on the highway my car just shut down. No warnings, no check engine lights NOTHING! It just completely shut off and would not turn on. Thankfully because of the holiday the highway was pretty empty and I was able to swing my car across the interstate so I wouldn’t get hit by oncoming traffic. After getting out and deciding to check my oil I noticed it looked milky. I had no idea what that meant so I had it towed to a Mazda dealership in the state I live in. It was going to cost me almost $8,000 to put in a new engine because the water pump that was placed inside of the engine failed, which in turn caused my engine to seize. The extended warranty I had on my vehicle was worthless so I ended up paying out of pocket. Thankfully Mazda worked with me and had me prove that I kept up maintenance on the truck so the price was chopped in half. This happened right at the beginning of Covid when the entire world was suffering financially. I still had to make my car payments on top of shelling out 4k on a truck I hadn’t even had for a year. This is a huge issue with a lot of people that own the same vehicle and is extremely dangerous! I could’ve killed someone or worse myself when my vehicle stalled out on the highway.
- Engine · Fuel/propulsion system
The water pump failed causing water to mix with the oil and damage the head gasket. Estimates recommend replacing engine. The service engine light came on and we took it to our trusted mechanic right away. Got the estimates from two mechanics for this repair and then towed the car to Mazda…
The water pump failed causing water to mix with the oil and damage the head gasket. Estimates recommend replacing engine. The service engine light came on and we took it to our trusted mechanic right away. Got the estimates from two mechanics for this repair and then towed the car to Mazda dealer who confirmed the problem. We wrote to Mazda's corporate office and was told they would not fix it. My car has 68,000 miles and was regularly serviced. It is currently sitting dead in my garage. We bought this car in 2015 brand new from the Mazda dealer in Monroeville, PA. This is outrageous! I spoke with someone else who also owns a Mazda and the same thing happened to his car. From articles I have read and attached, this problem is occurring in many Mazdas. What needs to be in place for Mazda to take responsibility and fix this problem by recalling the affected vehicles?
- Service brakes
Brakes stopped working while we were on vacation. Made the drive down fine, but the next day went to drive the car, pressed the brakes and the car did not come to a complete stop. Also made a funny noise when we tried to press on the brakes. My husband practically had to stand up and push all the…
Brakes stopped working while we were on vacation. Made the drive down fine, but the next day went to drive the car, pressed the brakes and the car did not come to a complete stop. Also made a funny noise when we tried to press on the brakes. My husband practically had to stand up and push all the way down to get car to stop. Luckily we were not in a congested or confined place. Ended up replacing the brake booster. Three weeks later my acceleration stopped working intermittently. I go to press the gas and the car doesn’t go. The dealership is saying it’s the brake signal.
- Engine
Water pump failed and ruined the engine. There was little to no warning.
- Service brakes
Breaks became very hard to press and I was having trouble stopping the car. I could not drive it to the Mazda dealer who was too far. I took a chance and drove a few miles to local break shop. They replaced the master cylinder and the break booster. Parts and labor were $1083.87
- Service brakes
When I press on my brakes, I hear air. I am fortunate that, as of this reporting, I have not had an accident. My brakes do not fully stop my car, so I have to judge when to brake in order to slow down and not hit the car ahead of me. Very scary when your car won't stop! I have read other…
When I press on my brakes, I hear air. I am fortunate that, as of this reporting, I have not had an accident. My brakes do not fully stop my car, so I have to judge when to brake in order to slow down and not hit the car ahead of me. Very scary when your car won't stop! I have read other complaints on the Mazda CX9s built in 2013 having an issue with the brake booster. PLEASE recall these 2014 Mazdas so the appropriate repairs can be made. Working brakes are ESSENTIAL!
- Engine
I bought a vehicle from Carvana 11/2021 with not quite 59k on it. On 6/21/2023, with 77K miles, my car had a catastrophic engine failure. I was driving my grandchildren ages, 3-12 years of age home. Safety was definitely at risk with speeds of 70 freeway were completed right before engine stopping.…
I bought a vehicle from Carvana 11/2021 with not quite 59k on it. On 6/21/2023, with 77K miles, my car had a catastrophic engine failure. I was driving my grandchildren ages, 3-12 years of age home. Safety was definitely at risk with speeds of 70 freeway were completed right before engine stopping. The mechanic shop has confirmed the car giving 3 codes related to timing belt/water pump and the other code which confirms engine failure. No warning lights had come on until I tried to restart it. Since this situation is most recent, I have not had anyone else inspect the vehicle. I am working through my options and will take recommendations for resolution.
- Unknown or other
I was driving on interstate and there were not any other vehicles that were all that close to me. All of a sudden there was this huge extremely loud bang and glass shattering sound. Scared me to death. I never saw anything, I pulled over at next exit and saw my sunroof with a huge hole and…
I was driving on interstate and there were not any other vehicles that were all that close to me. All of a sudden there was this huge extremely loud bang and glass shattering sound. Scared me to death. I never saw anything, I pulled over at next exit and saw my sunroof with a huge hole and shattered. I drove back by where i was driving and there was nothing i could see that could have caused that to happen. After doing a little research i'm positive the sunroof exploded. Thankfully my kids were not in there and i was able to remain calm enough to get pulled over safely
- Engine
My transmission is slipping ….
- Service brakes
The car started creating a noise like air was leaking when i apply brake. The problem continued to increase, and braking became harder and harder. The dealer indicated that I had to replace the brake booster. This is a 2014 CX-9. A NHTSA search showed that vehicles manufactured in 2013 were affected. My car was purchased in Feb 2014. I suspect this one too had that faulty equipment.
- Engine
Sudden failure of water pump located inside the engine caused engine to shut down immediately while driving 70 mph on busy expressway. Extremely dangerous situation due to heavy traffic and high speeds traveled. Only by sheer luck were we able to coast across 4 lanes of traffic to an exit ramp…
Sudden failure of water pump located inside the engine caused engine to shut down immediately while driving 70 mph on busy expressway. Extremely dangerous situation due to heavy traffic and high speeds traveled. Only by sheer luck were we able to coast across 4 lanes of traffic to an exit ramp and barely make it into a parking lot after crossing 2 more lanes on the frontage road. Very difficult to steer and brake due to no engine power. Repair cost was $4,433. Two subsequent follow up repairs for check engine light and oil control valve issues related to water pump failure were required and covered under initial repair warranty. Research on web indicates this is a common problem with this engine with many complaints occurring soon after 100k miles. In many cases customers reported having to replace the engine or sell the car for parts due to the high cost of repair. Locating the water pump inside the engine block was a terrible design fault and extreme safety hazard when it fails.
- Engine · Fuel/propulsion system
Water pump defect that led to pump failure, which led to catastrophic engine failure without any prior warning. The defect is in the internal chain-driven water pump. The pump is meant to circulate coolant through the engine while the engine is running. However, the defect allows coolant to leak…
Water pump defect that led to pump failure, which led to catastrophic engine failure without any prior warning. The defect is in the internal chain-driven water pump. The pump is meant to circulate coolant through the engine while the engine is running. However, the defect allows coolant to leak from water pump into the oil pan and/or other engine components, mixing it with the engine’s oil and leading to destruction of the engine. Mazda’s internal data indicates that the company began receiving reports of premature water pump failures in vehicles identical to mine (mine is a 2014 Mazda CX-9) by at least June 2007, yet Mazda continued to sell the vehicle without fixing the defect and failed to warn customers of the defect. The owner's manuals say nothing about water pump maintenance because the water pump should last the life of the Mazda vehicle. My water pump failed and destroyed my engine at just a mere 72,400 miles. The water pump problem is caused by the elastomer bellow, which is made with hydrogenated acrylonitrile butadiene rubber, which is damaged by hot coolant. Due to problems with the seal, coolant leaks into other components because the water pump is located above the crankshaft. An engine will allegedly fail once coolant mixes with engine oil and travels through the engine. Mazda allegedly has done nothing to fix the water pumps and won't recall the vehicles to offer free repairs. The automaker is also not reimbursing owners who may pay thousands of dollars for repairs related to failed water pumps. When I took my CX-9 to my Mazda dealer because it was leaking coolant, the dealer informed me I needed a new water pump but then said that because of that they should just replace the engine, for a total cost of approx. $9,000. Dealer gave no explanation of why it concluded before looking inside engine or at timing chain why I must buy a new engine because of bad water pump. Clearly dealer knew defect was the reason but withheld that info. That's fraud
- Engine · Power train · Unknown or other
- Water pump failed causing coolant to mix with oil. This repair cost was around $3,900. - Luckily this failure happened on our community road and was able to pull into our driveway. Mechanic stated that if this happened on the highway or regular road, this could have caused a major incident and…
- Water pump failed causing coolant to mix with oil. This repair cost was around $3,900. - Luckily this failure happened on our community road and was able to pull into our driveway. Mechanic stated that if this happened on the highway or regular road, this could have caused a major incident and possibly a blown motor. - No, but complaints of similar issues have been reported via my online research. - Just by the mechanic I had my vehicle towed to. - There was no indication of an issue until the water pump failed.
- Seats
Drivers seat will not recline backwards
- Unknown or other
Sunroof exploded spontaneously, we have a dashcam and nothing from the road hit it.
- Unknown or other
Water pump faild without warning car overheated and breaking was made difficult. Almost collided with another car do to the breaking not working properly when the car over heated. This problem was or is part of a lawsuit agianst Mazda. Im not sure if there has been a resolution to the lawsuit.
- Engine
I purchased a 2014 Mazda CX-9 on 12/14/2019. On Monday 10/18/2021 I was driving on the Hwy on the way home and my check engine light came. I had my mechanic check it out and he said the computer read a P0019 code. So on 10/20/2021, I took it to the dealer where I originally purchased it and this…
I purchased a 2014 Mazda CX-9 on 12/14/2019. On Monday 10/18/2021 I was driving on the Hwy on the way home and my check engine light came. I had my mechanic check it out and he said the computer read a P0019 code. So on 10/20/2021, I took it to the dealer where I originally purchased it and this was the same code they found. At the local dealership, I was told that apparently, the water pump needed to be replaced due to water coolant in the oil pan. I had absolutely no warning. No leaking, no smell of coolant. This vehicle only has 88,000. Upon further research and to my surprise is that the water pump in the Duratec 37 engine and make and model has a design flaw with the water pump located in the engine with the timing chain. That is the number one problem that fails first due to the water pump gaskets wearing degrading without any warning pump has become damaged due to pump bearings too. I had my vehicle serviced with four oil changes over the past 28,000 miles since I purchased it. These late-model vehicles being built today I know do not burn that much oil nowadays. I also found out, the iVCT 3.7 Duratec is in the 2008-2015 Mazda CX-9 which I have the 2014 model. This 3.7 V6 uses a timing chain-driven water pump. I also found out this kind of water pump is prone to failing at the pump bearings which allows the timing center to move around. Once it’s bad enough coolant is dumped into the engine where it mixes with the oil dripping from the water pump into the oil pan. This is where the real problems begin. Coolant mixing with oil is not good. It can cause corrosion and lots of internal wear as the Duratec 3.7 engine oil is no longer able to properly lubricate moving parts and shut down the engine. Base on the number of oil changes I had during this time I'm sure it had nothing to do with the water pump failure issue. This is solely a Mazda manufacturing flaw with the design. At this time my warranty does not want to cover the repair. Thanks
- Service brakes
Our 2014 mazda CX-9 power brake booster has gotten progressively worse over the last few months and has now failed at 75,269 miles where the pedal IS spongy, pedal travel IS long and there IS a hissing noise (air leakage) from the power booster, all resulting in severely reduced brake effectiveness…
Our 2014 mazda CX-9 power brake booster has gotten progressively worse over the last few months and has now failed at 75,269 miles where the pedal IS spongy, pedal travel IS long and there IS a hissing noise (air leakage) from the power booster, all resulting in severely reduced brake effectiveness - very little. We cannot safely drive the car. This IS the same failure and safety defect that was the subject of odi investigation pe-14-005 (odi closed 2/10/2014) involving 2007-2013 mazda CX-9 vehicles in which the odi resume said "the agency will continue to monitor complaints and other information relating to the alleged defect and take further action in the future if warranted." in that case, in order to avoid a recall, in march 2014 mazda agreed with the nhtsa/odi to extend the warranty for 7 years or 100,000 for the 2007-2013 mazda CX-9 vehicles and repair the condition and initiated special service program ssp93. this now IS exactly that same condition but in the next year model - a model 2014 mazda CX-9 manufactured in 2013 that obviously received the defective power brake booster that was manufactured before the booster supplier corrected the faulty booster mold in february 2013. yesterday (4-29-21) mazda said (mazda customer service reference # 1-378914617) our vehicle IS not covered for the repair because the nhtsa/odi agreement and ssp93 only applies to 2007-2013 vehicles where ours IS a 2014, even though it was manufactured in 2013. this IS not only another example of the same problem now existing in 2014 mazda CX-9'S with a power booster manufactured before the february 2013 faulty booster mold correction, it IS unconscionable for mazda to refuse the repair. please - we need your help in resolving this - and need you to re-open the investigation for the safety of others. thank you.
- Engine · Unknown or other
I purchased a 2014 mazda CX nine a year and a half ago. The other day I was driving and I don't know where my fan got really loud so I pulled over and turned up the heat and turned off any ac. All the sun steam started coming out of my engine and the car died. After towing it to the local…
I purchased a 2014 mazda CX nine a year and a half ago. The other day I was driving and I don't know where my fan got really loud so I pulled over and turned up the heat and turned off any ac. All the sun steam started coming out of my engine and the car died. After towing it to the local dealership I was told that I had two options. I could either buy a brand new car or pay $13,000 to have it repaired. Apparently the water pump broke and the engine seized up. I had absolutely no warning. No leaking, no check engine light, nothing' I later found several reviews saying this was an issue with this make & model. I still owe over $16,000 on this car and now I have to get a new car.
- Steering · Suspension
Heard loud grinding sound from right rear side of vehicle when turning wheel to the right. Brought to mechanic and needed r rear wheel bearing and hub assembly costing $1000.00. Noticed there have been other complaints about this issue.
- Unknown or other · Visibility/wiper
Back windshield wiper won't move. Also the passenger side window in the front. Wont roll up and keeps making a clicking noise.
- Electrical system · Steering
1) when left parked for 2-3 days, mazda CX-9 (mine IS 2013) consistently drains the battery 2) on my grand touring the steering has a shake at above 60 mph the above problems are common on all mazda CX-9 and consumers are spending $$$ on these manufacturer issues
- Engine
TL* the contact owns a 2014 mazda CX-9. Contact stated that while driving at 40 mph, the vehicle decelerated and the steering ceased without warning. The contact depressed the brake pedal which failed to engage. The contact allowed the vehicle to idle with both feet off the pedals which allowed the…
TL* the contact owns a 2014 mazda CX-9. Contact stated that while driving at 40 mph, the vehicle decelerated and the steering ceased without warning. The contact depressed the brake pedal which failed to engage. The contact allowed the vehicle to idle with both feet off the pedals which allowed the vehicle to come to a complete stop. The contact turned the vehicle off and back on which resumed to normal vehicle operation for about 2-3 minutes however, the failure recurred. The contact inspected the vehicle for leaks but found none. The contact stated that the coolant bottle was empty. The contact checked the oil which looked milky and dirty. Lee edwards mazda (2218 louisville avenue, monroe, la 71201 (318) 388-3540) was contacted and informed of the failure. The vehicle was towed to an independent mechanic where it was diagnosed and determined that the water pump gasket was fractured. The vehicle was not repaired. The failure recurred. The manufacture was not made aware of the failure. The mileage was 70,000.
- Suspension · Wheels
Vehicle had a loud grinding/growing sound took it to the dealer in october 2018 replaced right front wheel bearing, same issue took to dealer replaced left front wheel bearing in may 2019, same issue replaced left front wheel bearing again december of 2019, same issue replaced right rear wheel bearing march 2020
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Lower ball joint separation
In an July 7,2015 letter to NHTSA, Mazda identified a safety defect that could result in lower ball joint separation in approximately 193,484 model year (MY) 2007 through 2014 Mazda CX-9 vehicles (NHTSA Recall No. 15V-451,Mazda 8515G).Mazda indicated that damage to the ball joint boot may allow water to enter the…
In an July 7,2015 letter to NHTSA, Mazda identified a safety defect that could result in lower ball joint separation in approximately 193,484 model year (MY) 2007 through 2014 Mazda CX-9 vehicles (NHTSA Recall No. 15V-451,Mazda 8515G).Mazda indicated that damage to the ball joint boot may allow water to enter the front suspension ball joint fitting during use which may result in premature ball joint wear and a progressively looser joint.In January 2014, Mazda implemented redesigned lower control arms in production vehicles to improve the durability of the lower ball joints.The redesign involved changing the shape of the top surface of the ball joint boot cover and adding a suspension plate to the undersurface of the knuckle.Mazda's recall will replace the defect lower control arms with the redesigned parts.ODI's analysis of information collected during PE15-022 identified a total of 62 ball joint separation incidents, including 34 identified in ODI complaints and 31 identified in Mazda complaints and field reports (3 of the Mazda records involve vehicles/incidents that were also reported to ODI).When Mazda's design change was implemented, most of the field experience related to lower ball joints involved complaints of noise and premature wear-out.Only 1 of the ODI and 6 of the additional Mazda separation complaints identified in ODI's analysis were reported prior to January 2014.Significant increases in the number and trend in separation complaints were observed in 2015, when 30 of the ODI complaints and 16 of the additional Mazda complaints were reported.The report trend appears to be accelerating, with 29 of the reports received after ODI opened PE15-022 on June 9, 2015.There has been one crash reported to ODI related to the alleged defect (VOQ 10746510). This investigation is closed based on Mazda's recall.The 34 VOQs associated with this investigation are: 10747358, 10746510, 10744897, 10743509, 10736229, 10735938, 10734763, 10734302, 10734290, 10733813, 10732578, 10732217, 10732154, 10731850, 10730736, 10730280, 10730143, 10730114, 10726622, 10726480 10726448, 10726168, 10725839, 10725567, 10725488, 10725427, 10725390, 10717510, 10714469, 10695142, 10668978, 10648429, 10640541, 10546535
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10244671Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10237216If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10232299Speedometer replacement procedure
- 10226924If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Cell phone charger/accessory in 12V socket (engine no start or unable to turn off) 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay/ Android Auto will not connect) 6. Over-sized wheels/tires (incorrect GPS location)
- 10226814Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10225724Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10217209In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
- 10215274This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10213430Excessive condensation or water within the headlamp assembly caustion
- 10213428Stains found on kpaint during PDI
- 10213427HandsFree bluetooth module and/or text messaging troubleshooting procedure
- 10213421Condensation/Fog in front and rear combination lights
- 10213417Passenger fAirbag deactivation (PAD) indicator light illumination
- 10213380Usual rattle/buzz type noise from presilencer
- 10213377Noise from fuel tank insulator Some vehicles may exhibit an unusual noise while driving the vehicles The noise may be caused by a broken fuel tank (B) insulator (A) that is haning down and contacting the propeller shaft.
- 10213336Engine Coolant Leak from lower radiator hose Some vehicles may exhibit an engine coolant leak (A) between the lower radiator hose (B) and the thermostat housing
- 10213333Battery test procedure requirements using the GR81291
- 10213329Engine Start /Stop Procedure with room fuse removed
- 10213326Mazda guidelines for factory scheduled maintenance
- 10213185Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10209778The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
- 10209761Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
- 10208567Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10208556Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10206002Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission (A/T) oil cooler and lines must be power flushed completely before an overhauled or replacement A/T is installed (except SKYACTIV-DRIVE). The most common cause of repeat A/T failures is lack of lubrication to the front and rear planetary gears. This is usually caused by an accumulation of metal particles and debris (from a previous A/T failure) on the internal mesh type baffle of the oil cooler. Power flushing will remove the restriction by back flushing, followed by forward flushing to dislodge a restriction, then back flushing again. This will in turn ensure full ATF flow for the transmission when it is operating.
- 10205994Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10202696Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary:
- 10202695Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. E85: A blend of 85% ethanol and 15% gasoline All Mazda vehicles can run on gasoline containing up to 10% ethanol (E10) but only some 1999-2001 B3000 trucks can run on gasoline with more than 10% ethanol blended. E10 compatible vehicles: All Mazda vehicles. E85 compatible vehicles: 1999-2001 B3000 Mazda trucks with the 8th VIN digit is V.
- 10201777Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline, E85: A blend of 85% ethanol and 15% gasoline, All Mazda vehicles can run on gasoline containing up to 10% ethanol (E10) but only some 1999-2001 B3000 trucks can run on gasoline with more than 10% ethanol blended. E10 compatible vehicles: All Mazda vehicles. E85 compatible vehicles: 1999-2001 B3000 Mazda trucks with the 8th VIN digit is V. What if a customer puts E85 in there Mazda vehicle? Symptoms include: Rough Running, Lean Codes, Misfires and/or misfire codes, Lack of power, Poor fuel economy, Spark knock, Mechanical engine damage.
- 10200933This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Every Mazda CX-9 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.