2016 Mazda CX-9

Owner complaints

What owners report most

1. Engine68
2. Electrical system14
3. Service brakes11
4. Power train9
5. Fuel/propulsion system7
6. Unknown or other6
7. Structure4
8. Wheels3
9. Engine and engine cooling3
10. Seats3

Latest complaints

• Oct 6, 2026CO
  Engine
  We discovered the problem by accident -- pulled out of our garage and there was a coolant puddle on the garage floor. No dashboard warnings, no overheat messages, no visible symptoms before that. That's what makes this failure mode dangerous: it loses coolant silently, and you find out from a…

  We discovered the problem by accident -- pulled out of our garage and there was a coolant puddle on the garage floor. No dashboard warnings, no overheat messages, no visible symptoms before that. That's what makes this failure mode dangerous: it loses coolant silently, and you find out from a puddle or from an overheat, not from the car telling you. A Mazda dealership confirmed the failure during a multi-point inspection by one of their master technicians (September 2026): coolant leaking from the back of the cylinder head, no signs of coolant and oil mixing, and a scan showing no history of overheating. Their recommendation is cylinder head replacement. The vehicle is available for inspection on request. This exact failure mode is a known design defect on 2016-2020 CX-9s with the 2.5T engine. Mazda itself acknowledged it -- special service program CSP11 ("Coolant Leaks at Cylinder Head Warranty Extension," NHTSA doc MC-11011136-0001, issued October 2024). That program extended the powertrain warranty to 10 years / 120,000 miles for precisely this failure, covering vehicles produced before June 2020 -- which includes this one. Here's the part that gets me: my vehicle is in the CSP11 VIN range, and the defect was diagnosed inside the program's 10-year date window. But the odometer is past 120,000 miles, so coverage was denied. The owner notification for CSP11 didn't go out until November 2024 -- to original owners. I bought this vehicle used, and never received that notice, so the extension was effectively invisible to the person actually driving the car as it crossed the mileage threshold. A manufacturer-documented design defect shouldn't lose all coverage on a technicality for used owners. Cause: UNKNOWN. The crack is at the cylinder head stud bolt hole area, matching Mazda's own documentation (TSB 01-002/23). No maintenance schedule prevents a casting crack.

• Sep 30, 2026OH
  Engine
  Cracked head cyclinder leaking. Unsafe to drive, coolant can leak into engine if not already. They are aware of it and extended a warranty for the issue in 2024. However people like me, my coolant didn't leak until this year 2026. There have been lawsuits on this issue, but they are still failing…

  Cracked head cyclinder leaking. Unsafe to drive, coolant can leak into engine if not already. They are aware of it and extended a warranty for the issue in 2024. However people like me, my coolant didn't leak until this year 2026. There have been lawsuits on this issue, but they are still failing to address this issue. They created another part to replace the defected part which costs around $6000-$7000. Yes, took it to a Mazda dealer and confirmed the issue and they can fix but cost would be out of pocket. No warning at all. The only way this was discovered was the smell of the coolant leaking.

• Sep 21, 2026FL
  Engine

  My car have a manufacturer engine defect that the company or corporation is not willing to fix. Only because I exceeded the warranty I call them (MAZDA) an told them that it wasn't under my control the these issues happened after the warranty expire. But they still refuse to help me.

• Aug 19, 2026TX
  Engine

  Engine revs or surges while in park, possibly faulty throttle box

• Apr 28, 2026WA
  Engine
  The cylinder head (which involves the engine cooling system) has a known manufacturer defect that affects all year/models of the Mazda CX-9 with turbo. The manufacturing defect poses a risk to motor vehicle safety in a group of vehicles or equipment of the same design and/or manufacturer.…

  The cylinder head (which involves the engine cooling system) has a known manufacturer defect that affects all year/models of the Mazda CX-9 with turbo. The manufacturing defect poses a risk to motor vehicle safety in a group of vehicles or equipment of the same design and/or manufacturer. Specifically, the overheating and failure of the engine can occur at any time, without warning. This puts my family at risk of being stranded on a roadway, particularly because my car is often driven in rural areas. The manufacturing defect is significant and is acknowledged by Mazda: Mazda has offered owners a voluntary, limited, warranty extension (CSP11) of 10 years or 120,000 miles. The voluntary warranty extension is not sufficient because it is limited in duration while the safety risk can happen at any time after the warranty extension expires. The warranty extension essentially only applies to about half of the expected lifetime of the car. NHTSA should determine that a recall and repair should be issued by Mazda that does not expire. The engine is defective, poses a safety hazard, and Mazda has fixed the engine for subsequent models (starting in 2021), so a repair is available.

• Dec 22, 2025FL
  Engine
  I own a 2016 Mazda CX9 Touring FWD (180k miles). Today my car was diagnosed with cracked cylinder head, resulting in coolant and oil leak from the head gasket. While there is a class action settlement about it where Mazda accepted the manufacturing defect, they do not cover the engine…

  I own a 2016 Mazda CX9 Touring FWD (180k miles). Today my car was diagnosed with cracked cylinder head, resulting in coolant and oil leak from the head gasket. While there is a class action settlement about it where Mazda accepted the manufacturing defect, they do not cover the engine repair/cylinder head replacement because my car's mile is over 120k. If it is a manufacturing defect, why year/mile make a difference on the responsibility of the manufacturer? Mazda obviously sold defect vehicles to their customers, and driving these vehicles under this condition is very dangerous! Now, they are expecting me to pay more than $10,000 for a vehicle priced around $6,000!

• Nov 3, 2025TX
  Engine
  In June of 2022 I started having a strong antifreeze/engine coolant smell inside the cab of my vehicle and also outside the vehicle. I had the car checked for a radiator leak, but there wasn’t one. I took my car into my local Mazda where they found that the engine coolant was leaking into the heads…

  In June of 2022 I started having a strong antifreeze/engine coolant smell inside the cab of my vehicle and also outside the vehicle. I had the car checked for a radiator leak, but there wasn’t one. I took my car into my local Mazda where they found that the engine coolant was leaking into the heads of the engine. Mazda kept my car for 5 months and repaired the problem, it cost me $4000 and they had added a 12 month 12,000 mile warranty for the parts. My car is a 2016 Mazda cx-9 at the time of the repair it had 70,430 miles on it. Now a few years later I am having the same issue with the coolant smell inside the cab and outside my vehicle, it goes into the shop for diagnosis on Monday November 10,2025. The car now has 118,000 miles on it. I had purchased an extended warranty for the car at the time of purchase but it had timed out a month before I took my car in for the first repair….please Mazda stand behind your vehicles I am a senior woman with very little income and I will not be able to pay out of pocket for this repair and I CANNOT afford a new car… I would like to get reimbursed for my out of pocket on the first repair and get my car repaired this time as well under a warranty.

• Oct 25, 2025CA
  Engine

  Cylinder head crack. Combustion gasses leaking into coolant causing overheat. Combustion gasses bleeding into oil causing excessive crankcase pressure.

• Sep 16, 2025FL148,000 mi
  Engine and engine cooling
  The contact owns a 2016 Mazda CX-9. The contact stated that while driving approximately 45-50 MPH, the vehicle suddenly lost motive power with white smoke coming from the front of the vehicle. The contact was able to get to the side of the road to inspect the vehicle and became aware that there was…

  The contact owns a 2016 Mazda CX-9. The contact stated that while driving approximately 45-50 MPH, the vehicle suddenly lost motive power with white smoke coming from the front of the vehicle. The contact was able to get to the side of the road to inspect the vehicle and became aware that there was coolant splattered all over the engine compartment. The failure had occurred twice. The “WRENCH” symbol was displayed with the “Service Vehicle” message displayed. The vehicle was taken to the dealer, who diagnosed that the coolant pump and water pump were leaking, and the radiator needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The manufacturer opened for the failure. The failure mileage was approximately 148,000.

• Apr 23, 2025PA
  Electrical system · Forward collision avoidance › Automatic emergency braking
  Smart City Break Malfunction warning light appears while driving. Simultaneously the tire pressure warning appears. Also, at the same time, the temperature reads -20 to -40 degrees. Yes, vehicle is available for inspection. Fearful that car could randomly break while driving putting myself and…

  Smart City Break Malfunction warning light appears while driving. Simultaneously the tire pressure warning appears. Also, at the same time, the temperature reads -20 to -40 degrees. Yes, vehicle is available for inspection. Fearful that car could randomly break while driving putting myself and family in danger since there is a malfunction. Mazda service center says the problem can’t be reproduced so there’s nothing they can do. The problem seems to appear when the outside temperature is 60 degrees Fahrenheit or higher.

• Dec 27, 2024NC
  Engine

  Engine failure with crack in the engine after a loss of coolant fluid.

• Nov 21, 2024FL
  Engine

  Head gasket leaking and caused major engine issue at 89,000 miles. Mazda has known of this issue, but refuses to recall it.

• Nov 13, 2024NV
  Engine
  While my wife was driving her 2016 Mazda Cx-9 Grand Touring on the freeway, many of the dashboard indicator lights came on warning her the engine was over heating and to pull over immediately. While she was attempting to move over to the shoulder, smoke appeared from underneath the engine hood…

  While my wife was driving her 2016 Mazda Cx-9 Grand Touring on the freeway, many of the dashboard indicator lights came on warning her the engine was over heating and to pull over immediately. While she was attempting to move over to the shoulder, smoke appeared from underneath the engine hood which made it difficult to safely move over to the shoulder. She believed the car was on fire so immediately exited the vehicle along with her sister whom was pregnant. I arrived within minutes and noticed the engine compartment was smoking and coolant/engine oil leaking underneath the car. The car was towed to my local Mazda dealership where I was advised days later the engine needed to be replaced due to blown head gaskets. They advised the vehicle over heated causing oil and coolant leaking from cylinder head that is warped. This repair would cost $11, 179.29. Mazda service advisor also mentioned the radiator and lower/upper radiator hoses needed to be replaced. This repair would cost $2691.28. This incident could've resulted in serious injuries or death from a known issue with these engines by Mazda. It's only a matter of time before this failed engine turns into a fatality. Do the right thing Mazda and fix these engines. Your reputation is on the line.

• Oct 29, 2024VA
  Engine

  Sudden and dramatic loss of engine coolant. Received a warning that engine was overheating, and to shut off engine. Quickly obeyed the prompt and found that most of the engine coolant had been lost due to a catastrophic failure of either the head gasket or head itself.

• Oct 24, 2024WA
  Electrical system

  Vehicle failed to turn off the engine while in park and I was unable to lock vehicle while engine was still running. The ignition button failed to work.

• Oct 1, 2024OR
  Engine

  Cylinder head coolant leak. No warning lights.

• Sep 9, 2024NC
  Electrical system · Engine · Steering
  1. What component or system failed or malfunctioned, and is it available for inspection upon request? The entire electrical system is malfunctioning. All dashboard service lights (check engine, ABS, etc.) illuminate simultaneously, causing the vehicle to stutter and shut off while driving. The…

  1. What component or system failed or malfunctioned, and is it available for inspection upon request? The entire electrical system is malfunctioning. All dashboard service lights (check engine, ABS, etc.) illuminate simultaneously, causing the vehicle to stutter and shut off while driving. The vehicle is available for inspection. 2. How was your safety or the safety of others put at risk? This issue has resulted in a dangerous situation, particularly when the vehicle lost power on the highway with my young children aboard. This sudden loss of control could have led to a severe accident. 3. Has the problem been reproduced or confirmed by a dealer or independent service center? Mazda’s service department has not been able to reproduce the problem despite multiple visits. I have provided video evidence, but no conclusive diagnosis or resolution has been achieved. 4. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives, or others? Mazda’s authorized technicians have inspected the vehicle several times, but no substantial action has been taken. The vehicle has not been inspected by police or insurance representatives. 5. Were there any warning lamps, messages, or other symptoms of the problem prior to the failure, and when did they first appear? All dashboard lights come on simultaneously without prior warning. The symptoms have been random and intermittent over the past few months. Given the ongoing risk, I request an immediate replacement of my vehicle. Please confirm receipt of this complaint and provide a plan for replacement. Thank you for your prompt attention.

• Aug 27, 2024FL
  Engine · Power train
  August 2nd I noticed a smell of Coolant coming from my car. I looked under my car and noticed it leaking green coolant. I took it to Mazda where they had it for 7 days to then give me a $6,300 estimate with possible added expenses. They diagnosed it as a cracked cylinder head and needs a gasket as…

  August 2nd I noticed a smell of Coolant coming from my car. I looked under my car and noticed it leaking green coolant. I took it to Mazda where they had it for 7 days to then give me a $6,300 estimate with possible added expenses. They diagnosed it as a cracked cylinder head and needs a gasket as well. I am a single mother and have work but I cannot afford that repair especially since Mazda is not going to honor there vehicle and what they stand by. With this issue with the coolant leak and the cracked cylinder the vehicle could have overheated and go into limp mode and come to a sudden stop with my children in the car while driving on the road. I could be hit as this puts my family at risk of injury while we go to school or work. Mazda has done nothing but tell me to submit a claim with customer service which I have. I had my case manager call me once and left a voicemail and I have called multiple times and have not heard back. There was no warning of this until I found forums and other stories that this unfortunately has happened to hundreds of Mazda owners.

• Jul 18, 2024VA
  Engine

  Coolant sprayed on top of engine

• Jul 10, 2024OK
  Engine
  Our 2016 Mazda CX 9 began leaking coolant and we took it to a shop who diagnosed it as coming from the cylinder head, requiring a very expensive repair or new engine. Luckily our engine did not sieze up while driving, but it easily could have with our baby and toddler in the car. Upon searching…

  Our 2016 Mazda CX 9 began leaking coolant and we took it to a shop who diagnosed it as coming from the cylinder head, requiring a very expensive repair or new engine. Luckily our engine did not sieze up while driving, but it easily could have with our baby and toddler in the car. Upon searching the internet I found countless reports from other CX 9 owners who experienced the very same issue at similar mileage ~50k-70k. There is a technical service bulletin for this issue, but they have not issued a recall. This very expensive repair is going to set us back significantly and is a financial burden we were not expecting from our well cared for vehicle. It seems Mazda knows about the issue and is unwilling to address it.

• Jun 25, 2024CA92,000 mi
  Engine and engine cooling
  The contact owns a 2016 Mazda CX-9. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated, and the vehicle started shuddering and overheating. The vehicle was taken to an independent mechanic who diagnosed the vehicle and determined that the failure…

  The contact owns a 2016 Mazda CX-9. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated, and the vehicle started shuddering and overheating. The vehicle was taken to an independent mechanic who diagnosed the vehicle and determined that the failure was related to a cracked head gasket. The vehicle was not repaired. The contact related the failure with the Technical Service Bulletin: 01-03/21; however, the vehicle was not included. The manufacturer was not notified of the failure. The failure mileage was approximately 92,000.

• Jun 11, 2024RI
  Engine

  Cracked cylinder head causing coolant to leak.

• Jun 4, 2024SC
  Engine
  2016 Mazda CX-9 is leaking coolant from exhaust side of engine cylinder head. This issue has been confirmed by a Mazda dealership in North Charleston, South Carolina. The issue first appeared shortly after replacing the water pump (performed by the same dealership). The issue is known and…

  2016 Mazda CX-9 is leaking coolant from exhaust side of engine cylinder head. This issue has been confirmed by a Mazda dealership in North Charleston, South Carolina. The issue first appeared shortly after replacing the water pump (performed by the same dealership). The issue is known and documents on Mazda TSB 01-002/23 - COOLANT LEAKS AT CYLINDER HEAD. The safety of my family was put at risk as there was no indication of a cracked head until there was coolant leaking on the driveway. Should the car have overheated without the indication of a coolant leak, the car would have been placed in to limp mode. Prior to the leak, there were no warning lamps or messages indicating the issue. Further, the Mazda dealership did not detect the issue at the time of replacing the water pump.

• May 30, 2024FL
  Engine and engine cooling
  The contact owns a 2016 Mazda CX-9. The contact stated that while driving at an undisclosed speed, the vehicle stalled. Several unknown warning lights illuminated. The contact stated after the vehicle cooled off, the was able to be restarted. The contact checked under the vehicle and stated that…

  The contact owns a 2016 Mazda CX-9. The contact stated that while driving at an undisclosed speed, the vehicle stalled. Several unknown warning lights illuminated. The contact stated after the vehicle cooled off, the was able to be restarted. The contact checked under the vehicle and stated that there was coolant leaking on the ground. The vehicle was taken to an independent mechanic, where it was diagnosed with a coolant leak behind the engine. The vehicle was not repaired. The contact related the failure to Technical Service Bulletin: 01-002/23. The dealer referred the contact to the manufacturer for assistance. The contact was unable to reach the manufacturer for assistance. The failure mileage was unavailable.

• May 24, 2024NC
  Engine

  Vehicle had a horrible coolant leak at the rear of the engine to find out the engine has a weak cylinder head and is known to break and leak coolant. The vehicle will need a new cylinder head or engine replacement.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11011141Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
• 11011136CSP11 - COOLANT LEAKS AT CYLINDER HEAD WARRANTY EXTENSION For certain 2019-2020MY CX-5, 2016-2020MY CX-9, 2018-2020MY Mazda6 that are equipped with SKYACTIV-G 2.5T engine, the warranty coverage for specific repair of the coolant leak at cylinder head is extended to: 10 years (120 months) or 120,000 miles (192,000 km) whichever comes first, from the original warranty start date CONDITION OF CONCERN On certain subject vehicles, the coolant may leak at the cylinder head around the exhaust manifold.
• 11011134Some vehicles may have coolant leaks at the cylinder head around the exhaust manifold (as shown below). There may be cracks at the stud bolt hole (1) or at the outside of the exhaust manifold flange (2) on the cylinder head.
• 11009661Please review the entire Dealer Email below announced on October 17, 2024 for full details regarding this campaign. Warranty Information is at the bottom of the TSB Parts and Warranty information and Repair Procedures will be available by October 25, 2024. Until that time if a vehicle is presented to your dealer with a complaint and CSP11 is visible in eMDCS, please click here and follow instructions in TSB 01-002/23 COOLANT LEAKS AT CYLINDER HEAD and hold claims until the Parts and Warranty Information is available in eMDCS and MGSS.
• 11009660Mazda Motor Corporation has decided to conduct a Customer Service Program (CSP11) to extend the limited powertrain warranty to 10 years or 120,000 miles, whichever occurs first, for necessary repairs if the covered vehicle has coolant leaks at the cylinder head, around the exhaust manifold. A dealer must inspect and confirm the covered vehicle is exhibiting coolant leaks at the cylinder head around the exhaust manifold matching Technical Service Bulletin 01-002/23 (Feb. 10, 2023) for the repair to be covered.
• 11009659Mazda Motor Corporation has decided to conduct a Customer Service Program (CSP11) to extend the limited powertrain warranty to 10 years or 120,000 miles, whichever occurs first, for necessary repairs if the covered vehicle has coolant leaks at the cylinder head, around the exhaust manifold. A dealer must inspect and confirm the covered vehicle is exhibiting coolant leaks at the cylinder head around the exhaust manifold matching Technical Service Bulletin 01-002/23 (Feb. 10, 2023) for the repair to be covered.
• 11009658Mazda Motor Corporation has decided to conduct a Customer Service Program (CSP11) to extend the limited powertrain warranty to 10 years or 120,000 miles, whichever occurs first, for necessary repairs if the covered vehicle has coolant leaks at the cylinder head, around the exhaust manifold. A dealer must inspect and confirm the covered vehicle is exhibiting coolant leaks at the cylinder head around the exhaust manifold matching Technical Service Bulletin 01-002/23 (Feb. 10, 2023) for the repair to be covered.
• 11009654The SKYACTIV-DRIVE FW6A-EL AT uses Automatic Transmission Fluid (ATF) Type: FZ. Only use ATF-FZ to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
• 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 11008577Some customers may complain about scratches on the instrument cluster lens.
• 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
• 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
• 11007018Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
• 11007013Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
• 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
• 11007009Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 11006998Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
• 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
• 11006917Some customers may complain that their liftgate does not open. This can mean a range of things, from the liftgate not unlatching to the power liftgate (PLG) not opening automatically. If you confirm that the customer's concern is that the liftgate does not unlatch correctly, follow the repair information below.
• 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 11003397Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
• 11003396Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 11000772Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 F (10 C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.
• 11000673Some customers may complain that the rear console / cup holder area is warming. The warming is caused by heat radiating from the rear heater core, which is located under the console. The warm air created by the heater core escapes through small
• 10254191Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
• 10254188Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 F (10 C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.
• 10254187Some customers may complain about infotainment center display. Peeling, spider cracks and white dots.
• 10252508Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10252507Due to limitations, certain vehicles from 2016 to current models might display an inaccurate transmission part number in the Global Electronic Parts Catalog (GEPC). To provide support in such cases, a temporary lookup guide has been developed for assistance.
• 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 10251368Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
• 10251363Some vehicles may exhibit a creaking or clacking noise when operating the power lift gate (PLG). The noise may be caused by the following: Creaking noise: Dust and dirt accumulates on the sealing portion of the PLG drive unit, reducing sealing performance. Snow and water may enter the PLG drive unit. Humidity then causes rust inside of the unit, resulting in noise. Clacking noise: Since the grease applied on the spring end of the PLG drive unit is insufficient, interference noise is caused when the spring end interferes with the spring guide. The noise has been eliminated by the following mass-production changes: Creaking noise: The sealing structure has been modified to prevent dust/dirt from entering the unit. Clacking noise: The production procedure of the PLG drive unit has been modified to apply sufficient grease to spring end.
• 10249497Some customers may complain about a creaking, knocking, rattle or clunk noise coming from the steering column while driving. A steering column nut loosens due to excessive load when driving on irregular roads. To eliminate this concern, the tightening torque for the steering column nut has been increased.
• 10248384Some customers may complain about a creaking noise coming from the steering column while driving. A steering column nut loosens due to excessive load when driving on irregular roads. To eliminate this concern, the tightening torque for the steering column nut has been increased.
• 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
• 10244671Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
• 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 10243568Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.

Every Mazda CX-9 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.