2006 Mercedes-Benz E350

Recalls

4 recalls name the 2006 Mercedes-Benz E350. Newest first.

• Visibility › Sun/moon roof assembly

  Nov 19, 2024NHTSA 24V87400033,456 vehicles

  Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.

  Risk and remedy

  Risk

  A detached sunroof panel can become a road hazard, increasing the risk of a crash.

  Remedy

  Dealers will inspect and replace the sunroof panel as necessary, free of charge. Owner notification letters were mailed January 10, 2025. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of previous NHTSA recall number 22V-954. MBUSA's number for this recall is 2024120001/2/3.

  Full recall details →

• Visibility › Sun/moon roof assembly

  Dec 23, 2022NHTSA 22V954000131,653 vehicles

  Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please refer to MBUSA's recall report for specific vehicle model details. The glass sunroof panel may not be properly secured and may detach.

  Risk and remedy

  Risk

  A detached sunroof panel may become a road hazard, increasing the risk of a crash.

  Remedy

  Dealers will inspect and replace the sunroof panel as necessary free of charge. Owner notification letters were mailed February 3, 2023. Owners may contact MBUSA customer service at 1-800-367-6372. This recall expands NHTSA recall number 19V-918. MBUSA's numbers for this recall are 2023010004, 2023010005, and 2023010006.

  Full recall details →

• Visibility › Sun/moon roof assembly

  Mar 19, 2021NHTSA 21V19600011,356 vehicles

  Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2007 C350, C230, C280, CLK350, E320CDI, E350 Wagon, E350, 2006 C55 AMG, CLK500, CLS500, CLS55 AMG, E500 Wagon, E500, E55 AMG, 2007 CLK550, CLS550, CLS63 AMG, E550, E63 AMG, and E63 Wagon AMG vehicles. The bonding between the glass panel and the sliding roof frame may deteriorate, possibly causing…

  Risk and remedy

  Risk

  A detached glass panel can separate from the vehicle and become a road hazard, increasing the risk of a crash.

  Remedy

  MBUSA will notify owners, and dealers will inspect the glass panel bonding and replace the sliding roof, as necessary, free of charge. Owner letters were mailed May 7, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of recall number 19V-918. MBUSA's number for this recall is 2021040012.

  Full recall details →

• Visibility › Sun/moon roof assembly

  Dec 20, 2019NHTSA 19V918000747,928 vehicles

  Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2001-2011 vehicles. The bonding between the glass panel and the sliding roof frame may deteriorate, possibly resulting in the glass panel detaching from the vehicle. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V918-4126.pdf

  Risk and remedy

  Risk

  A detached glass panel can separate from the vehicle and become a road hazard, increasing the risk of a crash.

  Remedy

  MBUSA will notify owners, and dealers will inspect the glass panel bonding and replace the sliding roof, as necessary, free of charge. The recall began July 10, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020040011.

  Full recall details →

Owner complaints

What owners report most

1. Fuel/propulsion system144
2. Fuel system, gasoline80
3. Engine50
4. Service brakes46
5. Power train37
6. Engine and engine cooling22
7. Electrical system19
8. Air bags14
9. Unknown or other10
10. Service brakes, hydraulic8

Latest complaints

• Oct 15, 2026CA151,000 mi
  Service brakes, hydraulic
  The contact owns a 2006 Mercedes-Benz E350. While driving at 30 MPH, a "Reduced Braking Power" warning message was displayed on the instrument panel followed by an audible alarm. The brake pedal travelled to the floorboard, resulting in a significant loss of braking functionality. Additionally, the…

  The contact owns a 2006 Mercedes-Benz E350. While driving at 30 MPH, a "Reduced Braking Power" warning message was displayed on the instrument panel followed by an audible alarm. The brake pedal travelled to the floorboard, resulting in a significant loss of braking functionality. Additionally, the vehicle became stuck in second gear, requiring the driver to pull over and have the vehicle towed to the residence. The consumer performed an OBD II scan, but no diagnostic trouble codes related to the brake failure were retrieved. The manufacturer was notified and confirmed that there were no active recalls associated with the failure. The failure mileage was approximately 151,000.

• Sep 23, 2026AR152,786 mi
  Electrical system · Service brakes, hydraulic
  The contact owns a 2006 Mercedes-Benz E-350. The contact stated that the sensotronic brake control warning was illuminated. The contact researched and found information about warranty coverage for 2006-2010 models with a 25-year warranty. The vehicle was taken to the dealer, who diagnosed that the…

  The contact owns a 2006 Mercedes-Benz E-350. The contact stated that the sensotronic brake control warning was illuminated. The contact researched and found information about warranty coverage for 2006-2010 models with a 25-year warranty. The vehicle was taken to the dealer, who diagnosed that the main battery needed to be replaced but had not provided the repair. The vehicle was also taken to a certified mechanic who diagnosed that the brakes were failing and the computer system needed to be reset; however, the vehicle was not repaired. The contact stated that the belts were replaced. The message remained displayed. The failure mileage was 152,786.

• Dec 3, 2025MS
  Forward collision avoidance › Automatic emergency braking · Service brakes
  Mercedes Benz issued a recall and extended a warranty on its 2003-2005 E Class SBC braking systems (recall # 2005110001) and extended the warranty to 25 years; the 2006 E Class models have the exact same SBC braking system but is not included in the recall. Mercedes needs to add the 2006 E Class…

  Mercedes Benz issued a recall and extended a warranty on its 2003-2005 E Class SBC braking systems (recall # 2005110001) and extended the warranty to 25 years; the 2006 E Class models have the exact same SBC braking system but is not included in the recall. Mercedes needs to add the 2006 E Class models to recall # 2005110001. My 2006 is experiencing the same SBC issues the 2003-2005 models are known to have but because my vehicle is 2006 it is not covered by the extended warranty.

• Oct 23, 2025TX180,000 mi
  Service brakes, hydraulic
  The contact called on behalf of the owner of a 2006 Mercedes-Benz E350. The contact stated that while his mother was driving at an undisclosed speed and approaching a traffic light, the brake pedal was depressed; however, the brakes failed to function as intended. The brake pedal was depressed down…

  The contact called on behalf of the owner of a 2006 Mercedes-Benz E350. The contact stated that while his mother was driving at an undisclosed speed and approaching a traffic light, the brake pedal was depressed; however, the brakes failed to function as intended. The brake pedal was depressed down to the floorboard. The contact's mother used the parking brake to stop the vehicle. The ABS warning light was illuminated. The vehicle was towed to the residence and then to an independent mechanic. The vehicle was diagnosed with Sensotronic Brake Control (SBC) system failure. The contact was informed that the Sensotronic Brake Control system needed to be replaced. The vehicle remained with the mechanic unrepaired. The manufacturer was made aware of the failure and advised the contact to report the failure to the NHTSA Hotline. The failure mileage was approximately 180,000.

• Oct 21, 2025OH97,900 mi
  Visibility
  The contact's son owns a 2006 Mercedes-Benz E350. The contact stated that while his son was driving at an undisclosed speed, the sunroof detached and shattered on the roadway. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the…

  The contact's son owns a 2006 Mercedes-Benz E350. The contact stated that while his son was driving at an undisclosed speed, the sunroof detached and shattered on the roadway. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 19V918000 (Visibility) and 22V954000 (Visibility); however, the VIN was included in the recalls, but the vehicle had been repaired in 2023 and 2025. The manufacturer was not notified of the failure. The failure mileage was 97,900.

• May 30, 2025MO
  Unknown or other

  Reduce power braking depress brake fully keeps popping up on my dash and not letting me take it out of gear

• Aug 29, 2024MO1 injury
  Engine · Power train · Vehicle speed control
  The engine in these cars are defective and can cause serious harm due to a part that was put inside the motor made of plastic. There was a lawsuit but if you didn’t get in on it you losses out for not knowing. I was recently at Mercedes dealership to fix recalls and they brushed me off. The car can…

  The engine in these cars are defective and can cause serious harm due to a part that was put inside the motor made of plastic. There was a lawsuit but if you didn’t get in on it you losses out for not knowing. I was recently at Mercedes dealership to fix recalls and they brushed me off. The car can catch fire and I’m already experiencing engine failure after only owning the car for a year. They don’t care because it’s an old car but it’s still being sold to unsuspecting buyers. I’m not the only one there are thousands of us who are at risk driving these cars because Mercedes won’t admit their off the showroom floor mistake.

• Mar 21, 2024NV149,000 mi
  Service brakes
  The contact owns a 2006 Mercedes-Benz E350. The contact stated while driving at 35 MPH, the vehicle would not stop when depressing the brake pedal. No warning lights were illuminated, however, the contact stated the entire instrument panel was illuminated in red. The vehicle was taken to a local…

  The contact owns a 2006 Mercedes-Benz E350. The contact stated while driving at 35 MPH, the vehicle would not stop when depressing the brake pedal. No warning lights were illuminated, however, the contact stated the entire instrument panel was illuminated in red. The vehicle was taken to a local independent mechanic where the vehicle's brake line, brakes, and rotors were replaced. The contact stated the failure recurred. The vehicle was driven to the contact's residence and was not repaired. The contact referenced the manufacturer recall 2005110001 Sensotronic Brake Control as a possible solution however, the VIN was not included in the recall. The manufacturer was notified of the failure and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was approximately 149,000.

• Feb 5, 2024TX177,000 mi
  Service brakes, hydraulic
  The contact owns a 2006 Mercedes-Benz E350. The contact stated that upon depressing the brake pedal, there was a beeping sound coming from the vehicle with a message stating "Stop, Reduced Braking Power, Depress Brake Pedal Fully" displayed on the instrument panel. The contact pulled over to…

  The contact owns a 2006 Mercedes-Benz E350. The contact stated that upon depressing the brake pedal, there was a beeping sound coming from the vehicle with a message stating "Stop, Reduced Braking Power, Depress Brake Pedal Fully" displayed on the instrument panel. The contact pulled over to shoulder of the road. Due to the failure, the vehicle was towed to the residence. The dealer was notified of the failure and the contact was informed that the vehicle was not covered under NHTSA Campaign Number: 05V133000 (Service Brakes, Hydraulic) which was linked to the failure. The manufacturer was also notified of the failure and the contact was referred to the NHTSA Hotline for assistance. The vehicle was not repaired. The failure mileage was approximately 177,000.

• Dec 30, 2023NY
  Engine
  Certain Mercedes-Benz models 2005- 2007 M272 V6 and M273 V8’s have faced or are facing issues regarding the balance sprocket in which drives the camshaft and crankshaft of the vehicle. Mercedes-Benz had made a decision to make certain engine components out of soft metals, when such metals are not…

  Certain Mercedes-Benz models 2005- 2007 M272 V6 and M273 V8’s have faced or are facing issues regarding the balance sprocket in which drives the camshaft and crankshaft of the vehicle. Mercedes-Benz had made a decision to make certain engine components out of soft metals, when such metals are not adequate in handling the stress of the engine. In particular, in many cases, the balance sprocket was made with inadequate materials and gradually deteriorated to the point in which it could not engage the timing chain and cause camshaft-crankshaft misalignment. I personally did not experience such failure yet but it is more of a concern as this is a common issue , the repair is quite substantial and the failure can damage the engine even more

• Oct 31, 2023MA
  Engine
  Engine codes P0016 and P0017 reads cam shaft and crank shaft correlation it is everywhere on the internet and on the Mercedes Benz Forum.This is a know problem that Mercedes has ignored. its on all 2004 thru 2008 vehicles with the 3.5 engine. Calls for a balancer shaft replacement. This should…

  Engine codes P0016 and P0017 reads cam shaft and crank shaft correlation it is everywhere on the internet and on the Mercedes Benz Forum.This is a know problem that Mercedes has ignored. its on all 2004 thru 2008 vehicles with the 3.5 engine. Calls for a balancer shaft replacement. This should definitely be a recall issue.The industry knows that is was poorly manufactured part. Your help with rectifying this issue would greatly help the and restore the reputation of Mercedes and restore faith in Mercedes Benz owners. My vehicle is a 2006 E350 4 Matic with only 113,634 miles

• Mar 19, 2023CA
  Fuel/propulsion system
  PZEV fuel tank leaks at top but is not repairable. Replacement requires complete tank replacment which is not economically feasilble. This forces owners to continue to operate vehicle with fuel leakage since repair of the tank is not possible. In older models a simple gasket change would resolve…

  PZEV fuel tank leaks at top but is not repairable. Replacement requires complete tank replacment which is not economically feasilble. This forces owners to continue to operate vehicle with fuel leakage since repair of the tank is not possible. In older models a simple gasket change would resolve such leaks, in the PZEV tank leaks can not be repaired and thus are left uncorrected. Many of these vehicles are now owned by minority owners who are unable to pay $5000 to repair a defective design. MB refuses to support owners.

• Dec 27, 2022VA
  Engine
  Driving the vehicle on several occasions on Interstate 66 and the vehicle spontaneously went into limp mode. Now we find out it's a balance shaft issue and is a known problem from Mercedes in the M272 engines for our 2006 E350 4-matic. They evidently used balance shafts with materials that were too…

  Driving the vehicle on several occasions on Interstate 66 and the vehicle spontaneously went into limp mode. Now we find out it's a balance shaft issue and is a known problem from Mercedes in the M272 engines for our 2006 E350 4-matic. They evidently used balance shafts with materials that were too soft, resulting in premature wearing of the balance shafts with all of the M272 engines produced during this time having the problem. There was a previous class action lawsuit, which Mercedes settled, however, the consumers were not adequately notified and no recall was ever issued for the cars. Now we have 2nd or 3rd owners having these problems that didn't get a notice and have no idea there is a huge expensive and dangerous problem with their vehicle. On I-66 traffic moves at 70 mph (regular lanes) or 75 mph (express lanes). Having the vehicle spontaneously go into limp mode because of this engine issue is dangerous and could have caused a fatal accident on multiple occasions for us. Mercedes should be recalling all of these engines and fixing them properly before someone gets injured or killed. When I spoke with Mercedes, they said because I was not involved in the class action suit at that time, they were not willing to fix the car or pay for any portion of the repair, which they quoted me as costing $16,228.96. The problem is the Mercedes went into limp mode on multiple occasions and there was no check engine light to indicate what the problem was for several months. We had no warning that this was going to happen which created a dangerous situation while driving. There were several incidents on different dates spanning months before a check engine light came on with codes and Mercedes could identify the problem specifically was the balance shaft failure.

• Dec 14, 2022MD
  Fuel/propulsion system

  I recently started smelling gas in my car after refueling. I was told by my mechanic that Mercedes was replacing fuel pumps and fuel tanks free of charge . Mercedes Benz customer care has advised this isn't so. This is an expensive repair and I am hoping Mercedes Benz can cover the cost of this repair and if not, offer substantial assistance.

• Dec 5, 2022MN
  Engine
  We just purchased a 2006 Mercedes for our teenage sons and had a dealer look at it before we purchased it. They told us there were a couple of codes that were worth watching but that it wasn’t anything significant right now. After the car started jerking and shaking while driving it, we brought it…

  We just purchased a 2006 Mercedes for our teenage sons and had a dealer look at it before we purchased it. They told us there were a couple of codes that were worth watching but that it wasn’t anything significant right now. After the car started jerking and shaking while driving it, we brought it in to dealership where they told us it had a common code for Mercedes in this timeframe P0016. Repair estimate is nearly $5000 to replace timing chain and balance shaft, or a new engine which would be roughly the same. After researching on my own upon being told this code, I found all of the information about the class action lawsuit and settlement, which of course we are too late to be a part of. The dealer said there is a potential that the car could just seize up at some point, so I don’t want my young sons to be out on the road when that happens. I am very frustrated and upset that this wasn’t a recall since it apparently affected a huge amount of vehicles manufactured within this time frame. There is a specific list of engines with known issues and ours is among them. Mercedes Benz should be held responsible for making this right because it was definitely a quality issue. Now we are stuck with an unsafe vehicle, or a massive expense due to defect.

• Nov 11, 2022CA
  Fuel/propulsion system
  In June 2017, I received a letter from Mercedes-Benz of America informing me that the warranty of the fuel system in my vehicle is extended to 15 years. In that same year, I had my whole fuel tank replaced by an authorized Mercedes Benz dealer in San Jose, California due to strong smell of fuel by…

  In June 2017, I received a letter from Mercedes-Benz of America informing me that the warranty of the fuel system in my vehicle is extended to 15 years. In that same year, I had my whole fuel tank replaced by an authorized Mercedes Benz dealer in San Jose, California due to strong smell of fuel by the rear wheel well on the driver side of the car. The repair was fully cover by MB-America under this extended warranty. On November 3, 2022, I experienced the same fuel smell from the same place of the car (i.e., driver side rear wheel well) and was told that the repair will not be cover at all, even though the fuel system in my car is only 5 years old. I am writing to suggest that you impose a 15 years warranty on the fuel leak replacement parts. MB needs to stand behind their product if it was their OEM parts and done by their authorized dealer. In my case the new fuel smell was due to a cracked Fuel Pump Assembly (Part # 211 470 60 94) which was found in the brand new fuel tank installed in my car in 2017. My car is now repaired at a local shop at a fraction of the cost that MB-San Jose would have charged me. My hope is for you to help future similar customers who will experience similar issue avoiding this unjust expense. Thank you very much, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).

• Aug 22, 2022TX
  Service brakes
  February 22, 2022 I was driving from Memphis, TN to Flower Mound,TX. It was raining really bad and once I got to Texas on University Ave. My brakes went completely out. I had to shut the car off to stop. Shortly after I heard about a recall involving this same matter but it was for 2006 Mercedes…

  February 22, 2022 I was driving from Memphis, TN to Flower Mound,TX. It was raining really bad and once I got to Texas on University Ave. My brakes went completely out. I had to shut the car off to stop. Shortly after I heard about a recall involving this same matter but it was for 2006 Mercedes SUV. However after reading the recall the same thing happened to me E350. I had to pay over $2000 on this repair. I feel I am entitled to be refunded. I also had to get the car towed home. I have tow record and repair record. And you should be able to research the weather on that date from Memphis to Texas. Please give me a response at [XXX] or email me at [XXX]. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).

• Aug 19, 2022CA
  Fuel/propulsion system
  The car would not start as the fuel pump was faulty and IS part of the tank design. Mbz knew of the problem because they repaired or replaced some of the cars but I was never notified till the problem. It cost me under $3,800 to repair and replace the gas tank even though they repaired a lot of…

  The car would not start as the fuel pump was faulty and IS part of the tank design. Mbz knew of the problem because they repaired or replaced some of the cars but I was never notified till the problem. It cost me under $3,800 to repair and replace the gas tank even though they repaired a lot of cars. My repair was finished on 05/14/18. I paid $3,409.33 for the repair and I want to be reimbursed for it. I filed a complaint back in 05/31/2018 under the complaint number [xxx]. I need help to get my money back. This was a bad design on their part. Thank you, [xxx] the car would not start fuel pump faulty and IS part of gas tank bad design cost me close to $3800, some paid by mbz. Mbz replaced 2009 gas tanks for free under warrenty but would not do mine. This IS a bad design they should have told me about it so I would not buy the car. It IS stupid to have to reaplce gas tank in order to replace a fuel pump in 2012 I had gas leakage from the same area and I paid to fix it they should have told me this would be a problem. Instead they kep silent when I take my car for service they always list of things to do so I can spend more money at the dealership why the [xxx]no body bothered to tell me about this problem that it would cost me a lot of moneyto fix . This car has cost over $60,000 to buy and I did not pay that kind of money for a car to last me only 12 years. Mbzs are supposed to last 30 years or more so ifeel cheated big time I think they are hiding this because they will get sued big time and I hope they do bothe the dealership and the mbz company. The dealership IS mercedes benz of valencia in valencia, ca 91355. Phone number 661-753-5555. I have the necessary paperwork. I would like to be reimbursed fro all the cost, the 3 weeks without a car and fro the pain and suffering they have caused me and so it will be a lesson to mbz and their dealers not to pratice this fraud. I am available for an interview or more information as needed. Regards, [xxx] information redacted pursuant to the freedom of information act

• Jul 20, 2022HI140,000 mi
  Service brakes

  Brake failure at 40 mph. RED CAUTION light on : "STOP Reduced braking power Depress brake pedal fully"

• Jun 5, 2022IL
  Engine

  Balance shaft issues possible cause of vehicle stalls and safety concerns.

• Feb 18, 2022FL184,000 mi
  Fuel/propulsion system

  The contact owns a 2006 Mercedes-Benz E350. The contact stated that while the vehicle parked, fuel was noticed leaking from the vehicle onto the driveway. The vehicle was not diagnosed or repaired. The approximate failure mileage was 184,000.

• Dec 31, 2021TX
  Fuel/propulsion system
  Noticed strong gasoline odor in left rear wheel well after filling the vehicle with fuel. Since the vehicle had just been repaired for an unrelated issue at a local Mercedes dealer, I took it back to them for troubleshooting. They diagnosed the problem as a leak at the seal on the fuel pump in the…

  Noticed strong gasoline odor in left rear wheel well after filling the vehicle with fuel. Since the vehicle had just been repaired for an unrelated issue at a local Mercedes dealer, I took it back to them for troubleshooting. They diagnosed the problem as a leak at the seal on the fuel pump in the tank. I researched this issue and found it is a recurring problem for which Mercedes had offered a warranty extension of 15 years. This extension expired for my vehicle in July 2020. Cost to repair was $3,256 as after a 10% discount. I was not informed of this issue or the extended warranty despite having the vehicle serviced at Mercedes dealers multiple times since purchasing it in 2008.

• Nov 17, 2021OH
  Visibility/wiper

  roof started leaking & whistling, could feel air even when it was closed. went to get it checked out was told the glass panel was detaching.

• Jul 31, 2021CA
  Fuel/propulsion system
  Leaking fuel tank and gaskets. A strong smell of fuel internally in the vehicle and externally with a full tank of fuel. Mercedes Benz Warrantee extension PE#12001 "Covered Fuel Tank Components." Mercedes Benz denied claim because of PZEV vs non-PZEV type of vehicle. Both vehicles PZEV and…

  Leaking fuel tank and gaskets. A strong smell of fuel internally in the vehicle and externally with a full tank of fuel. Mercedes Benz Warrantee extension PE#12001 "Covered Fuel Tank Components." Mercedes Benz denied claim because of PZEV vs non-PZEV type of vehicle. Both vehicles PZEV and non-PZEV, both use the same plastic gas tank, sending units, and fuel pump in their respective vehicles. How did NHTSA agree to cover non-PZEV vehicles only.

• Jun 16, 2021SC104,000 mi
  Fuel system, gasoline · Fuel system, gasoline › Delivery › Fuel pump
  The contact owns a 2006 Mercedes-Benz E350. The contact stated while the vehicle was stationary, she started to smell an abnormal fuel odor from the rear driver’s side seat. The contact stated there was no warning light illuminated. The contact took the vehicle to the local dealer, where it was…

  The contact owns a 2006 Mercedes-Benz E350. The contact stated while the vehicle was stationary, she started to smell an abnormal fuel odor from the rear driver’s side seat. The contact stated there was no warning light illuminated. The contact took the vehicle to the local dealer, where it was diagnosed with needing the fuel level sending unit and the seals and gaskets to be replaced. The vehicle was repaired however, the failure recurred. The contact stated that she was unable to continue driving the vehicle due to odor. The contact towed the vehicle to another local dealer, Mercedes-Benz of Myrtle Beach (936 Jason Blvd, Myrtle Beach, SC 29577, (843) 848-6800) where it was diagnosed with needing the fuel tank, fuel pump, fuel line and all the seals and gaskets needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 104,000.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Fuel Leakage From The Fuel Tank

  EA13003Opened Mar 15, 2013Closed Dec 19, 2014
  The Office of Defects Investigation (ODI) opened this investigation on January 23, 2012 as PE12-001 based on 20 consumer reports in model year (MY) 2003-2006 E55 AMG vehicles.Based on new reports in other E-Class vehicles, ODI upgraded the investigation to Engineering Analysis (EA) 13-003 on March 15, 2013, and…

  The Office of Defects Investigation (ODI) opened this investigation on January 23, 2012 as PE12-001 based on 20 consumer reports in model year (MY) 2003-2006 E55 AMG vehicles.Based on new reports in other E-Class vehicles, ODI upgraded the investigation to Engineering Analysis (EA) 13-003 on March 15, 2013, and expanded the scope to all E-Class vehicles through MY 2008.The complainants alleged a strong odor of gasoline fuel both inside and outside of their vehicle, particularly after refilling the fuel tank.Many of the complainants noted that the odor subsided or went away after driving some distance thereby lowering the fuel level in the tank.Other owners reported they would only fill the tank to about three quarters full to avoid the odor altogether.Some complainants alleged fuel leaked from the fuel filter/sender, located on the top of the fuel tank on the driver's side, and collected on top of the tank.There were also allegations that the fuel leaks were associated with an Emissions Recall Campaign (No. 2008020001) conducted by Mercedes-Benz USA, LLC (Mercedes) in 2008 on MY 2003-2006 E-Class and CLS-Class AMG models.The issue in the recall involved small cracks in the pressurized outlet fitting of the fuel filter/sender.AMG vehicles are high performance models that operate at higher fuel pressure and use a different fuel filter/sender and fuel pump than non-AMG models.Information on Recall No. 2008020001 is available from the U.S. Environmental Protection Agency (EPA) website at www.EPA.gov.ODI's investigation found various leak sources that are unrelated to the outlet fitting cited in the EPA recall campaign.Through interviews with complainants, field inspections of complaint vehicles, and the collection and laboratory analysis of failed parts, three identifiable leak sources were found.The component parts and areas of the leaks involve the On-Board Diagnostic fuel tank pressure sensor (located on top of the fuel filter/sender), the outlet of the centrally mounted fuel tank fuel filling limiter valve, and the top of the fuel pump. These areas of leakage are located at the top of the fuel tank in unpressurized parts of the fuel system. When the tank is full, fuel can slowly weep/seep from micro-cracks in these components and may collect in cavities on top of the filter/sender, pump, or tank.Contrary to complainant's allegations that fuel entered the inside of their vehicle under the rear seat bench, neither ODI nor Mercedes found a plausible way for this to occur.The fuel tank is located outside of the passenger compartment, attached to the underside of the vehicle.The service access ports for the fuel filter/sender (driver's side) and fuel pump (passenger's side) are located under the rear seat bench, covered by a steel plate, sealed and bolted to the vehicle floor.When technicians service the fuel filter/sender, which has a regularly scheduled 60,000 mile service interval, and/or the fuel pump, the work is performed from inside the vehicle by working through the access ports.By letter dated September 4, 2014, Mercedes has notified the agency that it will extend the original warranty coverage to 15 years and unlimited mileage on Covered Fuel Tank Components in E-Class vehicles in MY 2003-2009 and CLS-Class vehicles in MY 2006-2011.The covered fuel tank components for the warranty extension include the fuel tank, fuel filter/sender, fuel pump, and all related gaskets/seals and retention rings.ODI is closing this investigation based on the manufacturer's extend warranty of the affected fuel system components and in consideration that the nature of the leaks does not appear to present an un

• Driver Air Bag Circuit High Resistance

  PE10017Opened May 14, 2010Closed Nov 24, 2010
  Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty…

  Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
• 11008323Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove headlamps. 2. Remove all grommets from outlet openings. 3. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation diaphragm to work properly! 4. Remove existing service cover. 5. Place desiccant packs into the new service covers and bolt down (Picture_01). 6. Glue the new diaphragm onto the intended surface at the service cover (Picture_02). Note: The bonding surface must be clean and dry. 7. Attach service cover with desiccant pack at headlamp. 8. Install headlamp. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_03). 2. The new transparent diaphragm must be correctly bonded (Picture_04). 3. Check headlamp housing for any external damage.
• 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
• 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
• 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
• 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
• 10252770As previously reported, to enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a Settlement regarding claims relating to allegations that the 590 Mars Red paint available as an original, exterior color option for certain models of Mercedes-Benz vehicles may experience peeling, flaking, or bubbling of the exterior paint or clear coat. This Mars Red paint is sometimes referred to as Fire Opal. The purpose of this update is to alert you that: 1. The Settlement has received final approval. The Settlement will go into effect on March 11, 2024. As of that date, customers are eligible to receive extended warranty coverage under the Settlement. 2. Under the Settlement, an eligible customer might receive extended warranty coverage as of the date the vehicle is presented to your dealership OR certain customers might have validated Qualified Future Repair claims, making them eligible for a different level of coverage. To determine if a customer: (a) is eligible for extended warranty coverage; and (b) what level of warranty coverage is available to them, please refer to the Service Packages section in VMI/Netstar. 3. Damage code 21800 (damage type 00) must be used for warranty claims covered pursuant to the Settlement. Please note that you should only claim for the percentage of warranty repair cost reflected in VMI/Netstar (see below, e.g., for Period Two, claim only 50% of warranty repair cost). 4. Before the dealership agrees to perform any work: The customer should be given a Repair Order containing: (1) an estimate for the repair, (2) the portion covered under the extended warranty; and (3) the customers contribution amount for the repair, if applicable. The customer must agree to pay their contribution amount for the repair and sign the Repair Order before the repair is performed.
• 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
• 10219252In our continuing efforts to assure the proper performance of Mercedes-Benz products and to enhance the satisfaction of our customers, Mercedes-Benz AG (MBAG), the manufacturer of Mercedes-Benz vehicles, is extending the warranty coverage on the fuel filter unit in certain Model Year (MY) vehicles listed below from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 15 years/150,000 miles (whichever occurs first) due to the following condition: The fuel filter unit might need to be replaced due to minor fuel seepage at the fuel filter flange that could result in fuel odor and/or an activation of the check engine Malfunction Indicator Lamp (MIL). Note that a risk of fire has been ruled out based on the nature of the fuel seepage and the distance to hot components. The vehicles will be visible and flagged in VMI as OPEN on June 10, 2022
• 10215214In our continuing efforts to assure the proper performance of Mercedes-Benz products and to enhance the satisfaction of our customers, Mercedes-Benz AG (MBAG), the manufacturer of Mercedes-Benz vehicles, is extending the warranty coverage on the fuel filter unit in certain Model Year (MY) vehicles listed below from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 15 years/150,000 miles (whichever occurs first) due to the following condition: The fuel filter unit might need to be replaced due to minor fuel seepage at the fuel filter flange that could result in fuel odor and/or an activation of the check engine Malfunction Indicator Lamp (MIL). Note that a risk of fire has been ruled out based on the nature of the fuel seepage and the distance to hot components.
• 10205154Gasket may settle causing a slight oil leak.
• 10205147Ticking or pulsing noise from high-pressure pump and/or fuel injectors.
• 10186142Unmotivated Reaction from Park Assist - model series 213 facelift / 238 facelift with option code 235 (active par- king assist) and option code 501 (surround view system)
• 10186141NTG5.5: Incorrect time shown on instrument cluster, COMAND display, and analog clock
• 10186135If the customer brakes sharply from a speed of > 30mph, without ABS intervention, there is a single cracking noise from the area of the ESP hydraulic unit
• 10181124Harsh engagement when changing gear range from P to D or R
• 10181123Harsh engagement when changing gear range from P to D
• 10179951AIRMATIC Fault Message "Max 80 km/ h (50 mph) " In Instrument Cluster
• 10167561Xenon burner inoperative or flickers
• 10167525Apple products (iPhone or iPod) are not charged via the serial USB interface of the COMAND Online control unit (A40/3) in the stowage compartment of the center console.
• 10167000Surface damage on steering wheel trim
• 10166976Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual"
• 10166975This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014.
• 10166103The controls on the partially electric seat adjustment switch stick or are loose or broken.
• 10166092Dynamic seat control is not functioning correctly and/or air cushions do not inflate fully.
• 10166090Possible complaints: 1. Memory function of electric seat fore/aft adjustment not functioning. 2. Seat fore/aft adjustment with easy entry/exit feature not functioning. 3. Head restraint presetting not functioning. 4. Seat fore/aft adjustment can only be adjusted for 2 sec with the seat adjustment switch (seat can only be adjusted in longitudinal direction in fits and starts). 5. Function "Collision avoidance when folding down the rear seat backrest" not functioning (seat fails to move forward when the rear seat backrest is folded down).
• 10166084Rubbing noises at the point at which the covering rubs against the cover. Only occurs on vehicles with the sport package .
• 10166083Rubbing noises arise between the covering and cover of the sidebag
• 10166082Noises from area of seat adjuster or cushion frame.
• 10166081Noise complaints when load on backrest frame changes. Affects the driver and front passenger seats. Also perform the remedial action if you are performing work on: - backrest frame - backrest cover or - guide rail of head restraint. If the backrest frame is exposed as a result, the actions must always be performed in order to avoid follow-up repairs.
• 10165849AIRCAP functions excessively
• 10158329Oil in engine wiring harness
• 10151959Seat belt extender toothed rack sluggish or makes noises
• 10151948Display of suspension setting in head unit implausible
• 10151924Liftgate intermittently does not open fully
• 10135628iPhone mobile phone: Various complaints after software update to iOS8
• 10135598Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "Implausible data were received from the ethanol sensor"
• 10056470Xentry (mercedes): combination of fault codes p060c00 and/or p060600, causing various transmission symptoms due to central processing unit, software induced internal control unit fault IS detected. Model 212.098, 212.298, 212. 095, 212.195. Updated 1/6/15.
• 10051540Xentry: m271.8 evo engine has poor accelerator response- lack of power under full load and high rpm. Engine diagnosis warning lamp (cel) lights up, vehicle IS in limp-home mode (may or may not be intermittent).
• 10050860Mercedes (xentry): the inside door handle, on front door, IS inoperative due to the bowden cable becoming unhooked from clip and needs to be replaced. Model 207. No model years listed.

Every Mercedes-Benz E350 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.