2017 Mercedes-Benz Sprinter 3500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › Sprinter 3500 › 2017
These records cover every 2017 Mercedes-Benz Sprinter 3500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2017 Mercedes-Benz Sprinter 3500. Newest first.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2012-2018 Mercedes Benz Sprinter 3500 and Freightliner Sprinter 3500 vehicles upfitted into campers or recreational vehicles. The Electronic Stability Control (ESC) unit may become disabled on these vehicles.
Risk and remedy
Risk
If ESC becomes disabled, vehicle driving stability may be impacted under certain driving conditions, increasing the risk of a crash.
Remedy
DVUSA will notify owners, and dealers will replace the rear-wheel speed sensor with a more robust sensor, free of charge. DVUSA issued owners an interim notification on March 10, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is NC3DREZAHA.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2015-2020 Mercedes Benz Sprinter and Freightliner Sprinter vehicles. The hydraulic power steering return line hoses may detach at their connection points under certain operating conditions, causing hydraulic fluid to leak.
Risk and remedy
Risk
The sudden loss of power steering assist and hydraulic steering fluid leaking onto the roadway may increase the risk of a crash.
Remedy
DVUSA will notify owners, and dealers will check the return line connections of the power steering system, correcting it as needed, free of charge. The recall began December 23, 2020. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this campaign is NV3LETULPE.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2015-2017 Freightliner Sprinter 2500 and 3500 and Mercedes-Benz Sprinter 2500 and 3500 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the driver frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
DVUSA will notify owners, and dealers will replace the front driver air bag module, free of charge. The recall is began March 15, 2019. Owners may contact DVUSA customer service at 1-877-762-8267.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2014-2017 Freightliner Sprinter 2500 and 3500 and Mercedes-Benz Sprinter 2500 and 3500 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
DVUSA will notify owners, and dealers will replace the front passenger air bag module, free of charge. The recall began March 15, 2019. Owners may contact DVUSA customer service at 1-877-762-8267.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2017 Mercedes-Benz and Freightliner Sprinter 2500 and 3500 vehicles. These vehicles may be missing spot welds on the front side wall, connecting the door portal to the hinge reinforcements in the A-pillar area, possibly affecting vehicle strength in a crash.
Risk and remedy
Risk
If the missing welds affect body strength, there may be an increased risk of injury in the event of a crash.
Remedy
DVUSA will notify owners, and dealers will inspect the vehicles and add any missing spot welds, free of charge. The recall began on July 2, 2018. Owners may contact DVUSA customer service at 1-877-762-8267.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2016-2017 Mercedes-Benz Sprinter 2500 and Sprinter 3500 vehicles, equipped with folding seats (sales code S20). The unloaded vehicle weight (UVW) label on these incomplete vehicles may be incorrect.
Risk and remedy
Risk
The incorrect UVW label can result in final stage manufacturers exceeding the maximum vehicle weight once the vehicle is completed. A vehicle that exceeds its maximum weight has an increased risk of a crash.
Remedy
DVUSA will notify owners, and dealers will replace the UVW label and inspect the vehicle to make sure that it is not overloaded, free of charge. The recall began on April 3, 2018. Owners may contact DVUSA customer service at 1-877-762-8267.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2017 Mercedes-Benz Sprinter 3500 and Freightliner Sprinter 3500 vehicles equipped with the Crosswind Assist function. In the event of strong crosswind, automatic brake interventions by the vehicle dynamics control system (ADAPTIVE ESP) might not be activated.
Risk and remedy
Risk
If Crosswind Assist system does not activate the automatic braking system as expected in the event of a strong crosswind, there would be an increased risk of a crash.
Remedy
DVUSA will notify owners, and dealers will update the ESP control unit with corrected software, free of charge. The recall is expected to begin in January 2018. Owners may contact DVUSA customer service at 1-854-888-3214.
Midwest Automotive Designs, LLC (Midwest) is recalling certain Custom Vans and Camper Van recreational vehicles built on 2014-2017 Mercedes Benz Sprinter chassis and 2016-2017 RAM Promaster chassis. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from…
Risk and remedy
Risk
In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
Remedy
Midwest will notify owners, and dealers will replace the fire extinguisher with a different brand, free of charge. The recall began on December 11, 2017. Owners may contact Kidde customer service for their replacement extinguisher at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2017 Mercedes-Benz and Freightliner Sprinter 2500 and 3500 vans. The spare tire holder under the vehicle may not be properly secured.
Risk and remedy
Risk
If the spare tire holder is not properly secured, the spare tire may separate from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
DVUSA will notify owners and dealers will lift the spare tire holder completely and tighten the securing screws as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact DVUSA custom service at 1-854-888-3214.
Owner complaints
28 complaints
What owners report most
Latest complaints
- Wheels › Rim
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact stated that while driving at an undisclosed speed, the front driver's side tire became deflated. The vehicle was driven to the dealer, where the contact was informed that the front driver's side rim was cracked. The contact was…
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact stated that while driving at an undisclosed speed, the front driver's side tire became deflated. The vehicle was driven to the dealer, where the contact was informed that the front driver's side rim was cracked. The contact was informed that the front driver's side rim needed to be replaced. The contact was informed that the parts were unavailable. The vehicle was taken to an independent mechanic, where the contact was informed that the failure had reoccurred due to potholes in the road. The vehicle was repaired; however, the failure reoccurred. The failure became a persistent failure. Additionally, the contact stated that the front passenger's rim and both rear rims were all cracked. In addition, the driver's side rear tire was damaged because of the failure. The contact stated that parts were unavailable at the dealer. The contact stated that during the failure, the contact had to search around for replacement rims. The manufacturer was not made aware of the failure. The failure mileage was approximately 15,000.
- Air bags · Electrical system
The vehicle has swivel seats. When the driver’s seat swivel, it’s severed the wires, the control the SRS system.
- Fuel system, diesel
The contact owns a 2017 Mercedes-Benz M3CA76 Sprinter 3500. The contact stated while driving at approximately 65 MPH, the diesel purifier, Diesel Exhaust Fluid, DEF system, warning illuminated. The contact stated that the failure of the DEF system had occurred before the recent failure. The contact…
The contact owns a 2017 Mercedes-Benz M3CA76 Sprinter 3500. The contact stated while driving at approximately 65 MPH, the diesel purifier, Diesel Exhaust Fluid, DEF system, warning illuminated. The contact stated that the failure of the DEF system had occurred before the recent failure. The contact stated that the first failure had occurred several years ago. The contact had taken the vehicle to an independent mechanic where it was diagnosed and determined that the DEF system again needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 325,000.
- Fuel system, diesel
The contact owns a 2017 Mercedes- Benz Sprinter 350. The contact stated that while driving at various highway speeds the warning message "DEF Is Low" had suddenly displayed and the vehicle went into "Limp Mode" causing the speed to suddenly reduce to 5 MPH. The vehicle was taken to the local…
The contact owns a 2017 Mercedes- Benz Sprinter 350. The contact stated that while driving at various highway speeds the warning message "DEF Is Low" had suddenly displayed and the vehicle went into "Limp Mode" causing the speed to suddenly reduce to 5 MPH. The vehicle was taken to the local dealer who diagnosed that the DEF tank was faulty and needed to be replaced. The vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure but no assistance was offered. The failure mileage was 44,000.
- Structure
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact stated while driving approximately 25 MPH, he had to brake abruptly, due to an animal crossing the roadway. Then he heard a loud sound coming from underneath the vehicle, when he took his foot off the brake. . The contact pulled over…
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact stated while driving approximately 25 MPH, he had to brake abruptly, due to an animal crossing the roadway. Then he heard a loud sound coming from underneath the vehicle, when he took his foot off the brake. . The contact pulled over to the side of the road and saw the water tank had fallen to the ground. The vehicle was taken to an independent mechanic where the water tank was firmly re-attached to the RV. The manufacturer was notified of the failure, but has to date denied responsibility for inadequately attaching the water tank to its RVs. The failure mileage was 49,500.
- Forward collision avoidance › Adaptive cruise control · Service brakes · Vehicle speed control
The ESP and ABS warning lights went on suddenly after what sounded like a thud. The car had not run over anything. There was some initial brief chattering of the break pedal, and that subsided. The car was not near a suitable and available repair shop at the time. It was driven to complete a…
The ESP and ABS warning lights went on suddenly after what sounded like a thud. The car had not run over anything. There was some initial brief chattering of the break pedal, and that subsided. The car was not near a suitable and available repair shop at the time. It was driven to complete a trip. There were several instances of break pedal chattering that led concern about the controllability of the vehicle. During the trip, it was taken to a brake shop, and the technicians felt it was likely safe to drive. Eventually after the servicing dealer first replaced the front speed sensors, the ESP unit was found to be shorted. This event is of concern because the speed sensors on the rear have been replaced on recall and the front speed sensors have been granted an extended warrantee. Both feed into the ESP unit that failed. It seems possible the previously suspect parts may have damaged the ESP unit. There appears to be a safety issue with faulty break performance in this situation. The vehicle only had about 13,000 miles on the odometer. at the time of the event. Service an repair records are available upon request
- Unknown or other
The front left wheel cover shifted and nearly sheared off the tire valve stem. Had this happened while we were on the road, the tire would have had a very fast deflate/explosion. This would have put the 24ft. RV into an uncontrollable nose-dive and possible crash situation. The nearly-sheared…
The front left wheel cover shifted and nearly sheared off the tire valve stem. Had this happened while we were on the road, the tire would have had a very fast deflate/explosion. This would have put the 24ft. RV into an uncontrollable nose-dive and possible crash situation. The nearly-sheared valve stem was discovered by technicians while we were having routine maintenance done at the authorized Mercedes dealership. They removed the tire and replaced the valve stem. We were told by the Service Manager that this usually happens to the rear dual wheels, not the front. We have had zip ties put on to keep the wheel "hubcaps" (beauty rings) on the wheels because they are notorious for flying off. There are no warning lights etc. to indicate any wheel issues. This RV (Sprinter) has been in to authorized Mercedes Sprinter dealership for regular service over the past 4 years and only this time (June 26, 2023) was the problem discovered. The Mercedes Service Dept. in Eugene is the only technicians this RV has been in contact with. They seem to be aware that this "sheering" of valve stems is a reoccurring problem with Sprinters.
- Service brakes · Vehicle speed control
I'm getting wheel sensor errors and the vehicle goes into limp mode and disables the cruise control, even after replacing the sensors. Very frustrated with this dangerous situation!
- Tires
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact stated that on two separate occasions while driving at undisclosed speeds, the vehicle started shaking and the contact heard a loud sound coming from the vehicle. The contact veered off the roadway and noticed that the hub cap had…
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact stated that on two separate occasions while driving at undisclosed speeds, the vehicle started shaking and the contact heard a loud sound coming from the vehicle. The contact veered off the roadway and noticed that the hub cap had detached from the wheel. The contact stated that he was not aware that the inside tire had deflated. The contact then stated that he removed the hubcap from the road and continued driving to the nearest tire shop where it was diagnosed that rear driver’s side inside tire was deflated and needed to be replaced. The vehicle was repaired. The contact stated that on another occasion the vehicle was taken to the dealer for service, where the two rear passenger’s side tires were rotated, and the contact retrieved the vehicle however, while driving at an undisclosed speed, the vehicle failed to operate as needed. The contact pulled over to the nearest service station where it was inspected and the contact was informed that the two rear passenger’s side valve stem were entangled in the hub caps and needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure and the contact was informed that the VIN was not included in a recall. The failure mileage was approximately 26,000.
- Steering
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Number: 20V663000 (Steering) however, the part to do the recall repair was unavailable. The dealer was contacted, and it was confirmed that the part was not yet available. The contact stated…
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Number: 20V663000 (Steering) however, the part to do the recall repair was unavailable. The dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount time for the recall repair. The contact had not experienced a failure. Parts distribution disconnect.
- Electronic stability control (esc)
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact received a recall notification for NHTSA Campaign Number: 21V042000 (Electronic Stability Control) however, the dealer informed the contact that the part for the recall repair was not yet available. The contact stated that the…
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact received a recall notification for NHTSA Campaign Number: 21V042000 (Electronic Stability Control) however, the dealer informed the contact that the part for the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Wheels › Rim
The contact's parents own a 2017 Mercedes-Benz Sprinter 3500. The contact stated that his parents had experienced multiple flat tire failures with various tires on the vehicle. An independent mechanic discovered that there were multiple cracks on three of the rims on the vehicle. Due to that…
The contact's parents own a 2017 Mercedes-Benz Sprinter 3500. The contact stated that his parents had experienced multiple flat tire failures with various tires on the vehicle. An independent mechanic discovered that there were multiple cracks on three of the rims on the vehicle. Due to that discovery, his parents had all six tires and rims replaced on the vehicle. Recently, the contact discovered that the driver’s side inner tire had blown out after parking the RV. The contact called for emergency assistance and had the tire replaced. On a separate occasion, the contact noticed after parking the vehicle, the rear passenger’s side outer tire was flat. The contact again called for emergency assistance and while the tire was being replaced, it was discovered that the sidewalls had all fallen apart inside the tire. The vehicle was not diagnosed nor repaired. The contact believed that the cause of the tire failures was related to the rims on the vehicle. Neither the manufacturer nor the dealer was notified of the failure. The failure mileage was 8,100.
- Electronic stability control (esc)
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA campaign number: 21V042000 (Electronic Stability Control) however, the part to do the recall repair was unavailable. The contact called the local dealer and it was confirmed that the part was not yet…
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA campaign number: 21V042000 (Electronic Stability Control) however, the part to do the recall repair was unavailable. The contact called the local dealer and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue but was unable to provide a date when parts would be available. The contact had not experienced a failure. Vin tool confirms parts not available.
- Electronic stability control (esc)
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact stated while driving at 65 MPH, the cruise control disengaged as the ABS and ESP warning lights illuminated. The contact pulled the vehicle over and read the owner's manual to get information on the failure. Upon restart, the check…
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact stated while driving at 65 MPH, the cruise control disengaged as the ABS and ESP warning lights illuminated. The contact pulled the vehicle over and read the owner's manual to get information on the failure. Upon restart, the check engine warning light illuminated. The contact received notification of NHTSA campaign number: 21V042000 (Electronic Stability Control) however, the part to do the recall repair was not yet available. The manufacturer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was 5,500. Vin tool confirms parts not available.
- Electronic stability control (esc)
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA campaign number: 21V042000 (Electronic Stability Control) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not yet…
The contact owns a 2017 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA campaign number: 21V042000 (Electronic Stability Control) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Electronic stability control (esc)
TL* the contact owns a 2017 mercedes-benz sprinter 3500. The contact received notification of nhtsa campaign number: 21v042000 (electronic stability control). The contact stated that mercedes-benz of san jose service center located at 3000 e. Capitol expy suite a, san jose, ca 95148, (408)…
TL* the contact owns a 2017 mercedes-benz sprinter 3500. The contact received notification of nhtsa campaign number: 21v042000 (electronic stability control). The contact stated that mercedes-benz of san jose service center located at 3000 e. Capitol expy suite a, san jose, ca 95148, (408) 214-3009) exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the issue. The part was not available for the repair. The contact had not experienced a failure. Parts distribution disconnect.
- Fuel/propulsion system · Structure › Body · Unknown or other
Side entry door opened twice while driving. 1ST we thought we didn't close it right, but I checked and door had locks engaged. The 2ND time that door opened up, I pulled over and checked and engaged all locks on door and then pushed it a bit and to my surprise the door opened up! It turns out the…
Side entry door opened twice while driving. 1ST we thought we didn't close it right, but I checked and door had locks engaged. The 2ND time that door opened up, I pulled over and checked and engaged all locks on door and then pushed it a bit and to my surprise the door opened up! It turns out the screws were lose so the locks were not engaging. So I tightened them up with the drill and problem solved. This IS an rv and it IS driven many miles and on bumpy roads so the screws will loosen up causing the deadbolt locks not to engage properly. 2ND issue, holes underneath bed designed to allow slideout rollers to extend bed IS a safety concern as gas fumes enter the rv.*dt
- Wheels
We arrived home after a short trip, parked the vehicle and didn't see it until the next morning. We then found that both left rear tires were flat. Aired them up and drove to discount tire where we were informed that both rims were cracked at the exact same weld. The tires were in perfect…
We arrived home after a short trip, parked the vehicle and didn't see it until the next morning. We then found that both left rear tires were flat. Aired them up and drove to discount tire where we were informed that both rims were cracked at the exact same weld. The tires were in perfect condition: no bless, bubbles, or marks. Mercedes benz refused to warranty or replace the rims. We now see there IS a recall pending on an esp for the rear tires - we believe that are connected issues.
- Electronic stability control (esc) · Service brakes · Vehicle speed control
Our 2018 class c tiffin wayfarer IS built on the 2017 mercedes sprinter 3500 chassis. at 17,380 miles, with no warning, while moving, the vehicle began banging, lurching and sped up. All this occurred while attempting to go through a city street intersection. To stop the vehicle from this erratic…
Our 2018 class c tiffin wayfarer IS built on the 2017 mercedes sprinter 3500 chassis. at 17,380 miles, with no warning, while moving, the vehicle began banging, lurching and sped up. All this occurred while attempting to go through a city street intersection. To stop the vehicle from this erratic motion, I immediately switched it off and coasted to the side. had there been a vehicle or person directly in front of me, there IS no question that I unfortunately would have hit them as the vehicle sped up even with brakes applied. I restarted the vehicle and moved it out of the intersection. multiple error and warning lights came on the dash. with only three months remaining on the warranty, mercedes had the vehicle towed to a dealership who has just informed me the failure was caused by the left rear wheel speed sensor which they replaced. there are four of these sensors none of which should have failed with this low mileage. when will the other three fail? what risk of accident or injury will their potential failure cause? This IS a major concern. apparently mercedes IS well aware of these sensor failures as the service agent suggested this as a probable cause when I described the problem and reason for having the vehicle towed in. I do not believe mercedes has not issued a recall or extended the warranty on these wheel speed sensors. in my opinion, mercedes should definitely remedy these failures with better parts and warranty so as not to cause risk of accident or injury. I asked for the failed part, but was told mercedes has the dealer send the parts to them.*dt consumer stated rear sensors and moisture being investigated and feels that IS not the cause. Service tech feels it IS a faulty part or design. New replacement sensor has been replaced but failed after 45 miles. Front speed sensors also failed.*jb
- Electronic stability control (esc) · Service brakes · Vehicle speed control
Rmp sensor failed causing vehicle to lose anti lock brakes, traction control and cruise control. Plus forced vehicle into limp mode so it would barely move to rest area to call for assistance. I've been to three dealerships with this issue and they are all very aware that these faulty sensors…
Rmp sensor failed causing vehicle to lose anti lock brakes, traction control and cruise control. Plus forced vehicle into limp mode so it would barely move to rest area to call for assistance. I've been to three dealerships with this issue and they are all very aware that these faulty sensors exist. They have been and issue for years putting 100S if not thousands of sprinter owners at extreme risk with loss of anti lock brakes and traction control at the same time. Mercedes benz needs to correct this faulty part and recall all vehicles and fix
- Service brakes
Traveling on I-95 with the cruise control set at 70 mph. suddenly the vehicle decelerated and three warning lights (ABS, traction & the acceleration skid control / electronic braking assist) came on the dash. the vehicle felt sluggish and the cruise control would no longer work. There are only 21,200+ miles on the vehicle and this was a very dangerous situation for my family and I while traveling on the interstate.
- Wheels
I purchased a 2017 rv (17,00 mi) mercedes benz chassis in dec 2019 and in feb 2020 while driving home from a camping trip (55 mph highway) the warning light come on and vehicle was surging. I looked up the issue (wheel sensor failure) and slowly drove home. Got app with mb dealer and rear sensor…
I purchased a 2017 rv (17,00 mi) mercedes benz chassis in dec 2019 and in feb 2020 while driving home from a camping trip (55 mph highway) the warning light come on and vehicle was surging. I looked up the issue (wheel sensor failure) and slowly drove home. Got app with mb dealer and rear sensor replacement made under warrentry. I talked with previous owner and was given the history of rear wheel sensor failures with this rv. below IS his record nov 2018 (12,00 mi) both rear wheel sensor failures and replaced. April 2019 rear wheel sensor failed and replaced. July 2019 one sensor failed and replaced. I have read where this has been a continued failure issue with mb wheel sensors. please look into this issue and get mb to correct the problem. thank you
- Electrical system · Wheels
Wheel speed sensor failure. ABS, traction control sit down until replaced sensor.
- Structure › Body
Body parts are falling of for running boards, parts have fallen off on the highway and hit other vehicles. Dealer unable to find parts to resolve issue.
- Wheels
I have a 2018 thor siesta motor home built on a mercedes benz 3500 chassis. I went on a 6700 mile cross country trip and upon return found the front passenger tire flat. A local shop discovered that the rim was leaking air from a bad weld spot/crack on the inside. I replaced the rim back on may 27…
I have a 2018 thor siesta motor home built on a mercedes benz 3500 chassis. I went on a 6700 mile cross country trip and upon return found the front passenger tire flat. A local shop discovered that the rim was leaking air from a bad weld spot/crack on the inside. I replaced the rim back on may 27, 2019. I then went on a 1000 mile round trip and the following day I noticed another flat tire this time on the inside rear dual on the passenger side. My local shop confirmed the same issue with a weld/crack on the inside of the rim on may 29, 2019. I had to replace that rim also. Both times I noticed the flat tires after parking the vehicle upon returning from long road trips. On the second wheel replacement, I was shown where the leak was detected which was at the corner of the inside weld spot. There are 8 weld spots on the inside of each rim. Each time there was air leaking at the site of a weld spot. I called my local mercedes benz dealership to inquire if there was a reported issue from the factory and was told no. I then called my motor home dealership with the same inquiry and was told that they have not been made aware of any such issue.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Rear Wheel Speed Sensor Failure
The Office of Defects Investigation (ODI) analyzed complaint data provided by Daimler Vans USA, LLC (Daimler) as well as complaints submitted to ODI from consumers to identify incidents related to Rear Wheel Speed Sensors (RWSS) failures. ODI's analysis identified 6,710 incidents of RWSS failure (unique VINs) in MY…
The Office of Defects Investigation (ODI) analyzed complaint data provided by Daimler Vans USA, LLC (Daimler) as well as complaints submitted to ODI from consumers to identify incidents related to Rear Wheel Speed Sensors (RWSS) failures. ODI's analysis identified 6,710 incidents of RWSS failure (unique VINs) in MY 2012-2018 Mercedes- Benz and Freightliner Sprinter vehicles upfitted to campers or recreational vehicles (RVs) representing 81 percent of all Sprinter RWSS reports. Complaint and warranty analysis indicated that the majority of incidents (approximately 99%) were related to RWSS moisture intrusion condition in the Sprinter 3500 5-ton variant, which accounts for 98 percent of upfit campers, where moisture build-up and crystal dendrite formation develop in parked RVs and lead to sensor failures. According to the Daimler Information Request (IR) response, if the wheel speed information is detected as implausible by the Electronic Stability Program (ESP) control unit, the ESP system enters a failsafe mode where:-Driver torque requests are no longer accepted;-Cruise control, if used, would be deactivated; -The ESP/ABS system shuts off; and -Multiple warning lamps and messages advise the operator to take the vehicle to the workshop. While the majority of reports involved only ABS and/or ESP warning lights and messages on the instrument cluster due to faulty sensor signals triggering a failsafe mode, some reports cited intermittent sensor failures resulting in increased vehicle speed while in cruise control and degraded ABS or ESP. Degraded ESP functionality may impact driving stability of the 5-ton vehicle.On Feb 3, 2021, following discussion with ODI, Daimler submitted a Defect Information Report (DIR) to NHTSA describing a defect in the RWSS disabling the ESP control unit functions in approximately 48,667 MY 2012 through 2018 Mercedes-Benz and Freightliner Sprinter 3500 vehicles manufactured from Jan 4, 2012 through Oct 25, 2018 (Recall 21V-042). In its DIR, Daimler indicated that RWSS sensor failures are prevalent in camper vans due to sustained periods of non-use, during which time the moisture may not dry out, remaining inside the plastic housing package. If the moisture within the RWSS dries and the RWSS returns to normal operation, the failsafe mode and the warning lights will disappear at the next ignition cycle, but the sensor fault remains stored within the ESP control unit and can be accessed through a diagnostic evaluation. ODI will continue to monitor field experience in Sprinter non-RVs and Sprinter 2500 RVs 3-ton and 3.5-ton variants (approximately 626 vehicles).Daimler will notify owners of the recalled vehicles and advise them to take their vehicle to a Mercedes-Benz or Freightliner Sprinter dealer, who will replace the RWSS with a repackaged sensor with high robustness against moisture intrusion. Daimler began notifying dealers and owners in Feb 2021. This Preliminary Evaluation is closed.The ODI reports cited above can be reviewed at NHTSA.gov under the following ID numbers:11352380 11351299 11350521 11348969 11342776 11342464 11341988 11341151 11340388 11338230 11337921 11331832 11331829 11331476 11331427 11331066 11328671 11325768 11325693 11322814 11322346 11320295 11319376 11317336 11311647 11310621 11308318 11254223 11253828 11252220 11196530 11194330 11164250 11145019 11141273 11139000 11138785 11124129 11094122 11394837 11390889 11390039 11389262 11387883 11387713 11386418 11383887 11383866 11382947 11377384 11376615 11376973 11375781 11375403 11374997 11374151 11373892 11373111 11366293 11365920 11365594 11365355 11365194 11364253 11364346 11363990 11363787 11362948 113629
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011223SMOG/Emissions Test fail due to one or more Readiness Monitors not set Complaint: The vehicle has failed the State Emissions Certification because one or more of the OBDII readiness monitors are not completely set. Cause: One or more of the following Readiness Monitors are not fully set within XENTRY: Misfire Monitoring - Injection System Fuel System Monitoring - Injection System, Fuel System, EGR Valve, O2 Sensor NMHC Catalyst Monitoring - NMHC/Diesel Oxidation Catalyst NOx Aftertreatment Monitoring - SCR Catalyst System Boost Pressure System Monitoring - Turbocharger, Charge Air System Exhaust Gas Sensor Monitoring - O2 Sensor, NOx Sensors Diesel Particulate Filter Monitoring - Diesel Particulate Filter System Exhaust Gas Recirculation System Monitoring - EGR Valve and system Remedy: Please complete the required driving conditions to fully set the incomplete Readiness Monitor. DO NOT: - Erase any fault codes. If fault codes are present, process these and allow the readiness drives to clear fault codes. - Flash or SCN code the CDI or SCR control units. - Perform a manual DPF regeneration, unless instructed below. - Disconnect the main battery.
- 11001114Complaint A: The engine is jolting/bucking between 1700 and 1900 rpm. Complaint B: One or more mechanical related fault codes for EGR Valve stored in CDI control unit, with possible Check Engine Light. Review list of mechanical fault codes in table below. NOTE: If one or more electrical related fault codes for EGR Valve are also present in CDI, utilize Complaint C. Review list of electrical fault codes PDF document in attachments. Complaint C: One or more electrical related fault codes for EGR Valve stored in CDI control unit, with possible Check Engine Light. Review list of electrical fault codes PDF document attached. Cause of Complaint A: Increased friction between the EGR Valve blade and seat due to soot deposits causing a delay of the EGR Valve being able to reach the target value of the EGR Valve position controller. NOTE: This causes the EGR Valve blade and potentially the boost pressure controller to oscillate. Cause of Complaint B: Soot deposits between the EGR Valve blade and seat leading to the EGR Valve no longer being able to meet the desired target of the EGR Valve position controller. Cause of Complaint C: Internal EGR Valve or other electrical faults related to the EGR Valve function.
- 10235973Recall Campaign bulletin
- 10232322Complaint Engine runs irregularly and it shakes. Indicator lamp lights up. Information: Fault codes for injectors and/or combustion misfires may be stored in the CDI control unit: On engine 642 cylinder 6 is affected. On engine 651 cylinder 2 is affected. Cause Charge air from the exhaust gas recirculation is condensed after being introduced into the charge air section. Information: Under certain operating conditions, condensation that has collected in the charge air cooler can enter the combustion chamber to a damaging degree and a damage profile is then generated (connecting rod bent). Remedy Perform following testing and diagnosis operations
- 10231020Complaint Various issues including control unit programming procedure will not complete successfully/no newer software found, communication faults, or sporadic malfunction of systems. Cause Aftermarket CAN device could be installed into the vehicle's CAN network. Such devices can be but are not limited to, remote start modules, CAN blockers, or high idle modules. Remedy A successful control unit programming session cannot be ensured while aftermarket devices are connected to the vehicle's CAN network. Some of the device companies supply a bypass to allow control unit programming.
- 10207197Complaint Thank you for your continued support of the US Emission Modification Program (EMP). We are providing this LI to assist you in addressing vehicles that come to your workshop to receive the Approved Emission Modification (AEM), but show in VMI as eligible only for the Canada BlueTEC II Field Measure or as currently registered in Canada. Only vehicles currently registered in the United States, or held by a US dealer, are eligible to receive the US Approved Emission Modification (AEM), including vehicles originally built for the Canadian market. This LI is intended to help you evaluate how to proceed when presented with such a vehicle. Complaint 1: VMI shows Canada BlueTEC II Field Measure AND vehicle is currently registered in Canada. Complaint 2: VMI shows Canada BlueTEC II Field Measure AND vehicle is currently registered in the US or held by a US auto dealer. Complaint 3: VMI shows US Approved Emission Modification (AEM) AND vehicle is currently registered in Canada. Cause Cause 1: Canadian client traveling in the US. Cause 2: Vehicle came from Canada, but is now registered in the US or held by a US auto dealer. Cause 3: Vehicle came from the US, but is now registered in Canada Remedy Remedy 1: Vehicles registered in Canada are not eligible for the US Approved Emission Modification (AEM). Refer the client to visit https://www.BlueTECSettlement.ca for further information and to determine eligibility. Remedy 2: Verify the vehicle is currently registered in the US, or is owned by a US auto dealer. Open a PTSS case with a reference to LI49.20-N-073931 and upload a copy of the vehicle's current US registration or proof of ownership by a US auto dealer. Further instruction will be provided by PTSS. Remedy 3: Verify the vehicle is currently registered in Canada. Vehicles registered in Canada are not eligible for the US Approved Emission Modification (AEM). To assist us with correcting VMI, please open a PTSS case with a reference to L
- 10207182Complaint Oil loss from engine or visible traces of oil in the engine compartment. Cause To be determined in each possible situation Remedy Procedure for cause analysis: 1. Clean the engine if necessary. 2. Apply leak tracing powder. 3. Perform a test drive. 4. Locate the oil leak. 5. Perform the repair in accordance with the specific WIS document appropriate for the cause of the oil leak.
- 10206073Various complaints due to aftermarket OBDII device installed
- 10206072"The monitor status this driving cycle (PID 41) can be displayed as disabled in the generic scan tool although no monitor of this group is disabled "
- 10205221Headlamps and lamps fogged and/or leaking.
- 10205151Coolant, vacuum, temperature fault codes.
- 10202549Replace Wheel Speed Sensors
- 10202548Replace Wheel Speed Sensors
- 10191557Mercedes-Benz AG has determined that on certain Mercedes-Benz Sprinter vehicles, the hydraulic power steering return line hoses may detach at their connection points under certain operating conditions and may cause hydraulic fluid to leak resulting in the loss of power steering.
- 10187796Replace 3rd brake lamp, remove soft top compartment cover to access.
- 10187793Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz, has determined that on certain Model Year (?MY?) 2013-2017 B-Class, C-Class, CLA-Class, CLS-Class, E-Class, G-Class, GL-Class, GLA-Class, GLC-Class, GLE-Class, GLK-Class, GLS-Class, GT-Class, M-Class, S-Class, SL-Class, and SLK-Class (117, 156, 166, 172, 190, 204, 205, 207, 212, 217, 218, 222, 231, 242, 253, 292, and 463 platform), the software for the PASS control unit does not meet current series production configuration and therefore the possibility exists that a correct GPS position cannot be determined in the control unit for location based services, and an incorrect vehicle position may be displayed. Please note the E-call feature is not impacted by this issue. What We?re Doing MBUSA will conduct a Service Campaign. An authorized Mercedes-Benz dealer will update the PASS Control Unit Software
- 10186324Inspect Power Steering Hose Clamps
- 10179954Power Steering Hose Updated Repair Method
- 10179906Engine power output is reduced and/or engine indicator lamp lights up, various fault codes present in area of ex- haust gas recirculation (EGR system) or in charge air system
- 10178714Headlamps fogged
- 10170541Seat belt does not roll up correctly
- 10170528MBUX multimedia system: Commissioning problem - No PIN code available in VeDoc
- 10170524SOS display illuminates - poor radio and GPS reception or no reception at all (vehicle with code E4A)
- 10170523MBUX multimedia system: Central display goes dark temporarily (Connect5)
- 10170522MBUX multimedia system: Central display intermittently remains dark (NTG6)
- 10170521MBUX multimedia system: Malfunction in Android Auto (Connect5)
- 10170517MBUX multimedia system: Incomplete playback of navigation announcements (NTG6)
- 10168065Passneger-side Airbag
- 10168062Replace Passenger-side Airbag
- 10167540Engine in limp-home mode, engine diagnosis indicator lamp lights up, fault code P213862, P213864, P211271, P225113, P019122 or P019185 stored in control unit.
- 10166979AdBlue line leaking
- 10162202Clunking/Rattle Noise from Rear Axle Area
- 10162199Information:907 Sprinter 15 Passenger Van Trailer Hitch
- 10160742MBUX multimedia system: Smartphone Integration (Apple CarPlay, Android Auto) not available (NTG6)
- 10160740Instruction for the Removal of M20 Speed Limitation 65mph
- 10158368Status of Parts Ordering - Sprinter
- 10158337Ball joint check on front axle
- 10158314Status of Parts Ordering - Sprinter
- 10158312Status of Parts Ordering - Sprinter
- 10158146Coolant / Vacuum / Temperature fault codes - Check Engine Light with DTCs P003313, P0299FA, P0299FB, P226100, P261F71, P012800, and P012809
Every Mercedes-Benz Sprinter 3500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.