2020 Mercedes-Benz Sprinter 3500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › Sprinter 3500 › 2020
These records cover every 2020 Mercedes-Benz Sprinter 3500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
22 recalls name the 2020 Mercedes-Benz Sprinter 3500. Newest first.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2022 Mercedes-Benz Sprinter vehicles. The instrument cluster illumination may not be adjustable and appear too bright in certain lighting conditions. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Controls and Displays."
Risk and remedy
Risk
A display that is too bright can make it difficult for the driver to see critical safety information, increasing the risk of a crash.
Remedy
Dealers will update the instrument cluster software, free of charge. Owner notification letters were mailed January 31, 2025. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3BELKOM.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2020 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The connection between the propeller shaft bearing and crossmember may loosen, reducing vehicle control.
Risk and remedy
Risk
Reduced vehicle control increases the risk of a crash. Additionally, the propeller shaft may damage the fuel tank during a crash, causing a leak and increasing the risk of a fire.
Remedy
Dealers will inspect and replace the crossmember as necessary, free of charge. Owner notification letters were mailed April 19, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3QUERTR.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2021 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The longitudinal frame members may be missing reinforcement fasteners, reducing vehicle stability and decreasing the structural integrity of the third-row seats.
Risk and remedy
Risk
Reduced stability increases the risk of a crash. Additionally, the third-row seat mountings can fail, increasing the risk of injury during a crash.
Remedy
Dealers will inspect and repair the frame members as necessary, free of charge. Owner notification letters were mailed March 4, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3ROHRAH.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2023 Mercedes-Benz Sprinter and 2019-2021 Freightliner Sprinter vehicles. The partition wall may be missing bolts, allowing the wall to detach during a crash.
Risk and remedy
Risk
A detached partition wall can increase the risk of injury.
Remedy
Dealers will inspect and secure the partition wall as necessary, free of charge. Owner notification letters are expected to be mailed February 16, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3TREWAN.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2022 Mercedes-Benz Sprinter and 2019-2021 Freightliner Sprinter vehicles. The instrument cluster may fail to display any information when the vehicle is started.
Risk and remedy
Risk
A blank instrument panel will not show critical information, such as vehicle speed, fuel gauge, warning messages, and warning lights, increasing the risk of a crash.
Remedy
Dealers will update the instrument cluster software on the affected vehicles, free of charge. Owner notification letters were mailed May 5, 2023. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3KOMBAUS.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2022 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles equipped with a manual parking brake and 7-speed automatic transmission. The guide bushing on the parking pawl may fatigue, which can cause the parking pawl not to engage and result in vehicle rollaway.
Risk and remedy
Risk
Vehicle rollaway increases the risk of a crash.
Remedy
Dealers will update the software of the electronic stability, transmission control, direct select module, and electronic ignition switch control units, free of charge. Owner notification letters were mailed February 10, 2023. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's numbers for this recall are 22V2790611, 22V2790612, and 22V2790613.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2021 Freightliner Sprinter, Mercedes-Benz Metris, and Mercedes-Benz Sprinter vehicles. An error in the communication module's SIM card software can cause a mobile network connection failure, disabling the emergency call (eCall) system.
Risk and remedy
Risk
A disabled eCall system would prevent a vehicle occupant from contacting the emergency services call center in an emergency, potentially delaying emergency responders and increasing the risk of injury.
Remedy
The communication module software will be updated through an Over-the-Air (OTA) update, or by a dealer, free of charge. Owner notification letters were mailed October 13, 2022. Owners may contact DVUSA at 1-877-762-8267. DVUSA's number for this recall is VS2SIMKOM/VS3SIMKOM.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2021 Freightliner Sprinter and Mercedes-Benz Sprinter vehicles. The rearview camera may not display the rearview image due to a software error. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Risk and remedy
Risk
An inoperable rearview camera display reduces the driver's rear view, increasing the risk of a crash.
Remedy
Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed July 20, 2022. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3KOMRUE.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. A software error in the park lock system may allow the vehicle to move after the gear selector has been placed in the Park 'P' position without the parking brake applied.
Risk and remedy
Risk
Unintentional vehicle movement can increase the risk of a crash.
Remedy
Dealers will update the electronic stability program control unit software, free of charge. Owner notification letters were mailed February 11, 2022. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3PA27 ERI/ERO.
Daimler Vans USA, LLC (DVUSA) is recalling 2019-2021 Mercedes Benz Sprinter and Freightliner Sprinter vehicles equipped with swivel seats. The wiring harnesses for the front seats may have been routed incorrectly and could become jammed and damaged in the swivel seat frames.
Risk and remedy
Risk
Damage to the wiring harness can prevent the side air bag within the seat to deploy inadvertently or not deploy as designed, increasing the risk of injury.
Remedy
Dealers will attach the mounting clip to the correct position, free of charge. Owner notification letters were mailed on August 11, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3DREHSEL.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2021 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The MBUX multimedia system software may cause the display to remain black, or reboot after startup. This could result in the rearview camera image not displaying properly. As such, these vehicles fail to comply with the requirements of…
Risk and remedy
Risk
A backup camera that displays a blank image reduces the driver's rear view, increasing the risk of a crash or injury.
Remedy
The multimedia system software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. DVUSA issued owners an interim notification on July 23, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3UXPOBOX.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2020 Mercedes-Benz Sprinter vehicles. The screws for the front door hinges may not have been tightened properly.
Risk and remedy
Risk
Loose door hinge screws could change the gap between the door and vehicle body, increasing the risk of injury in the event of a crash.
Remedy
Dealers will check the screws and tighten them as necessary, free of charge. Owner notification letters were mailed June 18, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3TURSCHA.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes Benz Sprinter and Freightliner Sprinter vehicles. The hydraulic power steering return line hoses may detach and cause hydraulic fluid to leak.
Risk and remedy
Risk
A hydraulic fluid leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
DVUSA will notify owners, and dealers will install a screw-type clamp, free of charge. Owner notification letters were mailed on May 28, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is NV3LETULPX.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes Benz Sprinter and Freightliner Sprinter vehicles. The multifunctional display in the instrument cluster may not be adjustable and appear too bright in certain lighting conditions. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard…
Risk and remedy
Risk
A display that is too bright can hinder the driver's vision, increasing the risk of a crash.
Remedy
DVUSA will notify owners, and dealers will update the instrument cluster software, free of charge. Owner notification letters were mailed on May 28, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3DISPKI.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The retaining washer and bolt that connect the brake pedal to the bearing block, may come loose and detach. This could cause the brake lights to stay illuminated, even when the brake pedal is not pressed.
Risk and remedy
Risk
Malfunctioning brake lights can fail to alert other motorists of the driver's intention, increasing the risk of a crash.
Remedy
DVUSA will notify owners and dealers will secure a bearing bracket to brake pedal by retrofitting an additional retaining ring (with PNR A 907 994 01 00) at the bearing bracket of brake pedal, free of charge. DVUSA issued owners an interim notification on May 3, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3BREBOL.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes Benz Sprinter vehicles equipped with an optional electric sliding door. The auxiliary lock on the sliding door may be the incorrect type for an electric sliding door. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number…
Risk and remedy
Risk
In the event of a crash, the sliding door could dislocate more than intended, and increase the risk of injury to vehicle occupants.
Remedy
DVUSA will notify owners, and dealers will convert the sliding door from electric to manual function, free of charge. Owner notification letters were mailed January 20, 2023. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3SCHIEBT.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes Benz Sprinter and Freightliner Sprinter vehicles equipped with the multimedia system "Connect 5" and a rearview camera. The rearview image may not display within 2 seconds from the start of the backing event. In addition, the rearview image may be obscured or covered by the visual…
Risk and remedy
Risk
A delayed or obstructed rearview camera display can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy
DVUSA will notify owners, and dealers will perform a software update on the vehicles, free of charge. The recall began March 5, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3RUECON.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2016-2020 Mercedes-Benz Metris and 2019-2020 Mercedes-Benz Sprinter vehicles. The software design of the communication module may fail to communicate the correct vehicle location for the emergency call system (eCall) in the event of a crash.
Risk and remedy
Risk
Failure of the eCall system may result in emergency responders being dispatched to the wrong location, increasing the risk of injury following a crash.
Remedy
DVUSA will notify owners, and dealers will update the software communication module for the automatic emergency call system, free of charge. The recall began on May 5, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VSXHERMPOS.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles equipped with electric parking brakes. The rear brake calipers may leak brake fluid into the housing of the electric parking brake connected to the rear axle service brake system, allowing air to enter the hydraulic brake system.
Risk and remedy
Risk
Air in the brake system can result in extended brake pedal travel, increasing the risk of a crash.
Remedy
DVUSA will replace the rear brake calipers, free of charge. Owners notification letters were mailed on January 4, 2022. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3BREPB.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2015-2020 Mercedes Benz Sprinter and Freightliner Sprinter vehicles. The hydraulic power steering return line hoses may detach at their connection points under certain operating conditions, causing hydraulic fluid to leak.
Risk and remedy
Risk
The sudden loss of power steering assist and hydraulic steering fluid leaking onto the roadway may increase the risk of a crash.
Remedy
DVUSA will notify owners, and dealers will check the return line connections of the power steering system, correcting it as needed, free of charge. The recall began December 23, 2020. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this campaign is NV3LETULPE.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2020 Mercedes-Benz Sprinter vehicles. The outer area of the brake hoses on the front and rear axles may have been damaged during production.
Risk and remedy
Risk
Over time, the hose could begin to leak brake fluid, affecting the braking performance of the vehicle, including the potential loss of directional stability when braking, thereby increasing the risk of a crash.
Remedy
DVUSA will notify owners, and dealers will check the condition of the brake hoses on the front and rear axles and replace them as needed, free of charge. The recall began November 24, 2020. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3MONTLAU.
Daimler Vans USA, LLC (DVUSA) is recalling 2019-2020 Mercedes Benz and Freightliner Sprinters. The fuel line clamps may loosen and result in a fuel leak.
Risk and remedy
Risk
A fuel leak can increase the risk of a fire.
Remedy
DVUSA will notify owners, and dealers will check the fuel hose clamp connections and tighten or replace the components as needed, free of charge. DVUSA issued owners an interim notification on November 9, 2020. The recall began January 19, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3SCHELLE.
Owner complaints
13 complaints1 involved a crash
What owners report most
Latest complaints
- Electrical system · Power train
This vehicle with 19711 mileage was parked in the driveway. The engine started normally, but a red error message stated, "Service Required Do Not Shift Gears Visit Dealer". I contacted the local dealership and Mercedes Roadside Assistance was not able to reset the software. The driveshaft was…
This vehicle with 19711 mileage was parked in the driveway. The engine started normally, but a red error message stated, "Service Required Do Not Shift Gears Visit Dealer". I contacted the local dealership and Mercedes Roadside Assistance was not able to reset the software. The driveshaft was disconnected and two tow trucks were needed to pull the vehicle out of the driveway and then tow to the dealership. The technician found "internal electrical fault in ISM causing shifter not to come out of park". The electronic shifting unit was replaced and the vehicle is functioning normally. The switching unit did not have any external damage and there was no evidence of corrosion on the electrical terminal. This vehicle has had all of the recommended service at the dealership. It was previously serviced on Nov. 5, 2025 for recall 2025070011(update controll unit software). There were no transmission error codes. In approximately February 2026, the vehicle had not been started and the battery was dead. I jumped the vehicle to start it and then used a battery charger. No one was injured. Luckily this occured in my driveway. Mercedes assistance was appreciated. However, there was absolutely no indication of a problem prior to this. There is no mechanism to shift into neutral to move the vehicle unless the drive shaft is disconnected. If this were to occur on a busy street, it is possible that many people could have been injured. I am reporting this "near miss" in case there are other similar problems that have been reported. I believe that the unit will be inspected by Mercedes as well.
- Electrical system › Adas · Electronic stability control (esc)
See attached document for complaint.
- Electrical system · Exterior lighting · Visibility/wiper
We were driving on Rt. 32 north of Canaan Valley State Park in West Virginia. Suddenly the dashboard display began flickering on and off, displaying numerous multiple warning errors and alarms, and the windshield wipers began working and would not shut off. Turn signals would not function.…
We were driving on Rt. 32 north of Canaan Valley State Park in West Virginia. Suddenly the dashboard display began flickering on and off, displaying numerous multiple warning errors and alarms, and the windshield wipers began working and would not shut off. Turn signals would not function. Warning messages included instructions not to shift gears, lane keeping assist and automatic braking disabled, "Steering Malfunction", and many other errors. We have a partial video showing part on the incident. Dealer found evidence of corrosion on the Electronic Ignition System module, and sticking ignition on/off switch, which was indicated as the cause of the problem.
- Forward collision avoidance › Adaptive cruise control · Vehicle speed control
Mercedes Benz 3500 XL Sprinter motorhome, 2020 chassis. May 2023 MB did several recalls & software updates which MB USA headquarters said those changes could've affected the Cruise Control & Adaptive Cruise Control because these systems worked excellently until May '23, in my local MB Sprinter…
Mercedes Benz 3500 XL Sprinter motorhome, 2020 chassis. May 2023 MB did several recalls & software updates which MB USA headquarters said those changes could've affected the Cruise Control & Adaptive Cruise Control because these systems worked excellently until May '23, in my local MB Sprinter service. These systems have not worked more than 2% of the time. MB keeps changing items with no improvement. I told them to test on I-95 or The turnpike, as that's when we use it safely. Service tech said they're not allowed to test it there; we told them that's when it won't work, when we need it. Dozens of trips keep proving MB needs a permanent fix for the safety features we paid & need. I KEEP TRYING TO ADD MY 10 SECOND VIDEO CLIP BELOW BUT YOUR SITE WON'T TAKE IT. IT SHOWS the Cruise Control 3 blinking BLANK cursors on dash monitor where the mph Cruise miles #s setting should display. I showed this to my local MB service who sent video to MB USA HEADQUARTERS. Under my active Warranty they need to CHANGE the WHOLE CRUISE CONTROL SYSTEM. THESE bandaids are exhausting time & resources for all of us. Now their engineers say it could be the seat sensor. I've hamstring pain & need a seat cushion while driving. This EXCUSE is FAULTY like their FAULT CODES, as randomly I don't use my seat cushion & Cruise Control & thus Adaptive Cruise Control won't work. Thank you for your help! [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Service brakes, air › Antilock › Abs warning light
The contact owns a 2020 Mercedes-Benz Sprinter 3500. The contact stated that the message “Brake Assist Inoperable - See Owner’s Manual” message was displayed. The warning light remained illuminated for several miles before turning off. The vehicle was taken to the local dealer on three occasions…
The contact owns a 2020 Mercedes-Benz Sprinter 3500. The contact stated that the message “Brake Assist Inoperable - See Owner’s Manual” message was displayed. The warning light remained illuminated for several miles before turning off. The vehicle was taken to the local dealer on three occasions, where it was diagnosed that there was a low sensor, approximately 1.5 centimeters, and the sensor was adjusted. The fault code displayed was C174AFB on two diagnostic tests. The vehicle was repaired but the failure recurred. Additionally, the mechanic informed the contact to keep the front of the vehicle clean. The manufacturer was not contacted. The failure mileage was approximately 6,000.
- Air bags · Service brakes · Structure › Body
The above are wouldn't allow me to place a check mark in the appropriate boxes. In the Standard Vehicle Components and ADAS sections, I was unable to check the boxes, but our vehicle contains ALL of the items in the first and second sections. The vehicle was dropped off at Lazy Days, Tampa on…
The above are wouldn't allow me to place a check mark in the appropriate boxes. In the Standard Vehicle Components and ADAS sections, I was unable to check the boxes, but our vehicle contains ALL of the items in the first and second sections. The vehicle was dropped off at Lazy Days, Tampa on October 21, 2022 and so far they have been unable to provide an estimate or advise when we may receive our repaired motorhome. This dealer has a reputation for very poor follow-up. If you provide an email, I can send you the items to be checked. Despite going through two highway barriers at about 40 to 50 mph, the air bag system failed to deploy. The vehicle stopped as we ran into a fence at an angle of ten to fifteen percent. We luckily dodged five opportunities to be killed. My wife jumped out of the vehicle when it stopped and screamed so loud I could not believe it was her. I've been married 28 years and was shocked at her condition. I had to hold her to quiet her. The first hint of a problem was the brakes failed and the cruise control seemed to increase speed, but I'm not absolutely sure of this, but it felt like it. There are two Tiffin reps at Lazy Days, which I wrote about this, twice, and called leaving a message and they have not sought to get in touch with me. The supervisor, [XXX], of the intake service advisor, [XXX] said she would be in touch. I told her there was so much wrong, we understand if it took longer than her usual case. When it was about a month in, I called and discovered he no longer works there. They failed to assign someone to let us know of any progress. I called and left messages for [XXX] (Lazy Days employee) and wrote two emails and he also failed to get in touch, but he assigned [XXX] who called us asking what was wrong with our coach. I was beside myself. [XXX] failed to even read the invoice! I told her to read the invoice and call us back. Ran out of room. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Trailer hitches
The contact owns a 2021 Tiffin Wayfarer built on a 2020 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Number: 21V610000 (Trailer Hitches) however, the part to do the recall repair was not yet available. The local dealer was contacted and the contact was informed…
The contact owns a 2021 Tiffin Wayfarer built on a 2020 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Number: 21V610000 (Trailer Hitches) however, the part to do the recall repair was not yet available. The local dealer was contacted and the contact was informed that parts were not yet available. The RV was then towed to an independent mechanic but was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue but provided no assistance. The contact had not experienced a failure.
- Communication · Electrical system
The contact owns a 2020 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Number: 22V360000 (Electrical System, Communication) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of…
The contact owns a 2020 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Number: 22V360000 (Electrical System, Communication) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was not made aware of the issue. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Service brakes
This vehicle suspends cruise control and breaking assist without notice. These systems become unavailable sometimes for days. While driving downhill, you suddenly lose speed control requiring excessive manual breaking. The problem is dangerous because you suddenly lose the ability to maintain…
This vehicle suspends cruise control and breaking assist without notice. These systems become unavailable sometimes for days. While driving downhill, you suddenly lose speed control requiring excessive manual breaking. The problem is dangerous because you suddenly lose the ability to maintain cruise control. Breaking assist is lost and suddenly appearing people, bicycles or cars are at risk. A call to the manufacture, Mercedes-Benz yielded no help. They said they had never heard of this problem.
- Forward collision avoidance › Automatic emergency braking
The contact owns a 2020 Mercedes-Benz Sprinter 3500. The contact stated while driving approximately 60 - 80 MPH, the Crosswind Assist feature malfunctioned and was not able to be deactivated, causing the vehicle to abruptly brake and inadvertently turn the steering wheel. The dealer was made aware…
The contact owns a 2020 Mercedes-Benz Sprinter 3500. The contact stated while driving approximately 60 - 80 MPH, the Crosswind Assist feature malfunctioned and was not able to be deactivated, causing the vehicle to abruptly brake and inadvertently turn the steering wheel. The dealer was made aware of the failure; however, the vehicle was not diagnosed nor repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 4,900.
- Seats
The contact owns a 2020 Mercedes-Benz Sprinter 3500. The contact stated that the front and rear end tracks where the front driver’s and passenger's seats were mounted would cut his leg while entering or exiting the vehicle. The dealer was made aware of the failure and referred the contact to the…
The contact owns a 2020 Mercedes-Benz Sprinter 3500. The contact stated that the front and rear end tracks where the front driver’s and passenger's seats were mounted would cut his leg while entering or exiting the vehicle. The dealer was made aware of the failure and referred the contact to the original dealer, Renegade RV (52216 IN-15, Bristol, IN 46507) where the RV was purchased. Renegade RV was made aware of the failure but provided no assistance. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 800.
- Air bags · Back over prevention · Electrical system
The contact owns a 2022 Midwest Automotive Passage MD4 RV built on the chassis of a 2020 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Numbers: 21V410000 (Electrical System, Air Bags) and 21V411000 (Electrical System, Back Over Prevention). The contact stated that…
The contact owns a 2022 Midwest Automotive Passage MD4 RV built on the chassis of a 2020 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Numbers: 21V410000 (Electrical System, Air Bags) and 21V411000 (Electrical System, Back Over Prevention). The contact stated that while driving at an undisclosed speed, the cruise control and Forward Collision Avoidance would not activate as needed. The dealer was made aware of the recalls but informed the contact that appointments were not available until March 2022. The vehicle was not diagnosed nor repaired. The manufacturer was not made aware of the failure. The failure mileage was 125.
- Electrical system · Structure
2020 mercedes benz sprinter 3500. Consumer writes regarding a defective backup camera and lane watch. *Ld the consumer stated the back up camera/lane watch was unable to be seen in the daylight, the upper door lock was inoperative, the kitchen faucet leaked. The tv needs to be replaced. the…
2020 mercedes benz sprinter 3500. Consumer writes regarding a defective backup camera and lane watch. *Ld the consumer stated the back up camera/lane watch was unable to be seen in the daylight, the upper door lock was inoperative, the kitchen faucet leaked. The tv needs to be replaced. the mirrors were insufficient in allowing the consumer to view what IS being towed. The camera/radio would not turn off, but this was repaired. *Js
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011223SMOG/Emissions Test fail due to one or more Readiness Monitors not set Complaint: The vehicle has failed the State Emissions Certification because one or more of the OBDII readiness monitors are not completely set. Cause: One or more of the following Readiness Monitors are not fully set within XENTRY: Misfire Monitoring - Injection System Fuel System Monitoring - Injection System, Fuel System, EGR Valve, O2 Sensor NMHC Catalyst Monitoring - NMHC/Diesel Oxidation Catalyst NOx Aftertreatment Monitoring - SCR Catalyst System Boost Pressure System Monitoring - Turbocharger, Charge Air System Exhaust Gas Sensor Monitoring - O2 Sensor, NOx Sensors Diesel Particulate Filter Monitoring - Diesel Particulate Filter System Exhaust Gas Recirculation System Monitoring - EGR Valve and system Remedy: Please complete the required driving conditions to fully set the incomplete Readiness Monitor. DO NOT: - Erase any fault codes. If fault codes are present, process these and allow the readiness drives to clear fault codes. - Flash or SCN code the CDI or SCR control units. - Perform a manual DPF regeneration, unless instructed below. - Disconnect the main battery.
- 11009856Complaint: Check engine light with fault code: P300E3B the efficiency of component 'SCR catalytic converter' is not sufficient, is present in the CDI control unit CDI (N3/28). Cause: This subject is currently being analyzed for all 907s equipped with the OM642 engine. Follow the instructions related to this subject to collect information about your vehicle. After completing the checks, please open a TIPS case and at-tach the collected information.
- 11009854Complaint: Noises when reversing slowly <5 km/h (squeaking) Cause: There is a seal in the electric drivetrain that seals off the coolant system from the electric motor. This seal is moistened with coolant during forward travel. As a result of the change in rotational direction when reversing slowly, it may be the case that this sealing ring is no longer moistened. Squeaking noises may occur as a result of the so-called "stick-slip effect". This behavior does not impact the function or durability of the sealing ring and electric drivetrain. Remedy: Do not replace any parts. Explain the cause of the noises to the customer.
- 11008717Complaint Check engine light with fault code: P300E3B the efficiency of component 'SCR catalytic converter' is not sufficient, is present in the CDI control unit CDI (N3/28). Cause This subject is currently being analyzed for all 907s equipped with the OM642 engine. Follow the instructions related to this subject to collect information about your vehicle. After completing the checks, please open a TIPS case and attach the collected information. Remedy Please complete the following inspections and tests: 1. Perform a tailpipe wipe test and document the results along with photographs. 2. Inspect the NOx connectors, pins, crimps, and harnesses between N37/7 and N37/8 to F152f59, Z7108, W105/3, and X30/81. 3. Provide actual values/sensor plausibility test results for all pressure and temperature sensors with the engine com- pletely cooled off for at least eight hours, the key on, and the engine off. Repeat the test with the engine/exhaust at operating temperature and the engine idling. 4. Perform a pressurized smoke test of the intake, charge air system, and exhaust to verify that there are no leaks. Apply overpressure (not exceeding 26 psi) from the exhaust pipe end and seal the system at the clean airline toward the air filter housing. Manipulate all components during the smoke test. 5. Provide diesel particulate filter actual values and regeneration history. 6. Inspect the SCR temperature sensor wirings and pins for electrical and physical correctness. Determine whether this sensor reaches operating temperature while driving and document the time it takes to reach operating temperatu- re. 7. Inspect the Adblue injector nozzle/s for clogging or leaking, and provide photographs. 8. With the Adblue injector/s removed from the exhaust system, perform two to three Adblue pressure tests and check for leaks. If leaks are detected, provide photographs. 9. Collect an Adblue sample, test fluid quality, and provide notes on its condition and quantity (color, clarity, separati- on, odor, etc.), along with a photograph for review. Also, provide a photograph of the spray pattern. 10. Separate the exhaust pipe downstream of the diesel particulate filter, inspect the diesel particulate filter and SCR, and note any soot, blockage, or damage. Provide photographs. 11. Inspect the SCR catalyst interior for dried Adblue residue, and provide photographs. 12. Perform several test drives at varying speeds to gather graphical illustrations (screenshots of the completed graphs in PDF format) of signals from NOx sensors. Provide three to four graphs or actual values of operational NOx sensors with XENTRY; see attachments for examples. Additionally, provide one graph/screenshot of the vehicle idling at operating temperature. Disconnect the Adblue injection valve, drive for approximately 30 minutes to exhaust all Ad- blue within the SCR catalytic converter, and provide two to three additional NOx graphs/screenshots with the sensor disconnected. (see attachments for needed graphs)
- 11001114Complaint A: The engine is jolting/bucking between 1700 and 1900 rpm. Complaint B: One or more mechanical related fault codes for EGR Valve stored in CDI control unit, with possible Check Engine Light. Review list of mechanical fault codes in table below. NOTE: If one or more electrical related fault codes for EGR Valve are also present in CDI, utilize Complaint C. Review list of electrical fault codes PDF document in attachments. Complaint C: One or more electrical related fault codes for EGR Valve stored in CDI control unit, with possible Check Engine Light. Review list of electrical fault codes PDF document attached. Cause of Complaint A: Increased friction between the EGR Valve blade and seat due to soot deposits causing a delay of the EGR Valve being able to reach the target value of the EGR Valve position controller. NOTE: This causes the EGR Valve blade and potentially the boost pressure controller to oscillate. Cause of Complaint B: Soot deposits between the EGR Valve blade and seat leading to the EGR Valve no longer being able to meet the desired target of the EGR Valve position controller. Cause of Complaint C: Internal EGR Valve or other electrical faults related to the EGR Valve function.
- 11001110Complaint: Front door collides with fender. Excessive dynamic stress results in permanent deformation of the lower hinge and causes the front door to collide with the fender. This can result in damage to the door holder and the front door at the threaded connection of the door holder. Remedy: 1. In the event of damage to be claimed under warranty, please follow warranty guidelines 10.11.1 (see note) 2. Damaged body components will need to be repaired or replaced by a MB certified collision center. While at the collision center, please request a visual check for cracks on threaded connection of door holder in front door. 3. Replace lower hinge of front door on affected side of vehicle. (lower hinge will need to be painted) 4. Replace door holder (on both sides) with modified, shortened door holder. 5. For a repeat failure on a vehicle that has been previously repaired with the updated parts, Please create a PTSS case.
- 10253244Propeller Shaft Check Strap on the crossmember may not have been installed.
- 10251998News channel update.
- 10251997News channel update.
- 10251090Check Par????on Wall Bolts
- 10251089Recall Information.
- 10251088Recall Information.
- 10251085Check patrition Wall Bolts
- 10240168Various concerns in relation to electric power steering including Rattling/humming noise from electric power steering when steering fully turned (see video recordings 01 and 02).
- 10240045Modify Interior Blower Motor Fuse Layout
- 10235072Software Updates.
- 10235071Software Updates.
- 10235070Software Updates.
- 10235069Software Updates.
- 10235068Software Updates.
- 10235067Software Updates.
- 10233790Complaint Noise in front door from window regulator when driving. Cause Loosened nut of window lifter leads to screw connection at bottom of door breaking the mounting point in the door (see attached picture). Remedy Glue in repair panel A 910 722 33 00 and screw in again with collar nut A 005 990 64 50. When using the adhesive, observe the following: Roughen the bonding surfaces slightly and clean them so that they are free of grease in order to guarantee secure bonding.
- 10233787Complaint Vehicles with SCR Generation 4: SCR/AdBlue warning message cannot be reset. Information: All fault codes in AdBlue (SCR) control unit have been processed and rectified; however fault code P13DF00 remains active and stored in the AdBlue (SCR) control unit. Cause The procedure for resetting the SCR/AdBlue warning message with XENTRY Diagnosis has not been carried out. Information: In order to reset the SCR/AdBlue warning message for SCR Generation 4, the AdBlue system needs to be checked. Remedy Follow Diagnostic Instructions
- 10232555Update Software - Comfort Function
- 10232325Complaint Check engine warning light active. Fault code P300CA8 or P300CA9 "Hot film mass air flow sensor malfunction" is present in engine control unit. Cause a) In the case of fault P300CA8: Due to incorrectly installed component parts of the clean air line between the air filter box and the exhaust gas turbocharger, it is possible that leaks may occur in the system which subsequently result in air mass faults A fouled air filter or leaks in the intake or charge air system downstream of the exhaust gas turbocharger may also cause these faults. b) In the case of fault P300CA9: Computational model for programmed values of air intake, in particular, for the high load mode, calculates this high load correction programmed value incorrectly. This leads to the programmed value drifting too quickly towards the limit. Remedy Install the following add-ons: 18937 for XENTRY 12/2020 18938 for XENTRY 03/2021
- 10232322Complaint Engine runs irregularly and it shakes. Indicator lamp lights up. Information: Fault codes for injectors and/or combustion misfires may be stored in the CDI control unit: On engine 642 cylinder 6 is affected. On engine 651 cylinder 2 is affected. Cause Charge air from the exhaust gas recirculation is condensed after being introduced into the charge air section. Information: Under certain operating conditions, condensation that has collected in the charge air cooler can enter the combustion chamber to a damaging degree and a damage profile is then generated (connecting rod bent). Remedy Perform following testing and diagnosis operations
- 10231020Complaint Various issues including control unit programming procedure will not complete successfully/no newer software found, communication faults, or sporadic malfunction of systems. Cause Aftermarket CAN device could be installed into the vehicle's CAN network. Such devices can be but are not limited to, remote start modules, CAN blockers, or high idle modules. Remedy A successful control unit programming session cannot be ensured while aftermarket devices are connected to the vehicle's CAN network. Some of the device companies supply a bypass to allow control unit programming.
- 10230520(RC)Remove Power Sliding Door Function
- 10228818Complaint Various customer concerns of Climate Control system operating inadequately. Cause Stepper motor linkage in the heater case may cause a mechanical fault during actuation during unfavorable environmental conditions. NOTE: If the vehicle is equipped with H13 (rear additional heat exchanger), There is an additional stepper motor in the rear heater case under the vehicle. This stepper motor can influence the normalization process. May include fault code: B1A9C07 the output for control valve "Left water valve" has a malfunction. There is a mechanical fault. The component is called N29/12 (rear additional heat exchanger ) . Remedy: See instructions
- 10228812Complaint Distronic and/or Active Brake Assist inoperative after driving for an extended period Cause Blindness detection of the radar sensor. When driving for extended periods in areas with few or no objects for the radar sensor to detect, the radar sensor switches off due to the self-test and sets fault code C174AFB - The adjustment of the 'Active Brake Assist' control unit has malfunctioned. Remedy Check the area of the front radar for damage. Check whether fault code "C174AFB - The adjustment of the 'Active Brake Assist' control unit has malfunctioned" is set in the B92 or B92/1 Active Brake Assist/Active Distance Assist DISTRONIC (ABA/DTR) (FCW177) control unit. If the fault code is present, check the vertical actual values. If these are not OK, please correct the value with inspection of installation position or calibration of installation height (see attachment 2021 NDTD_Vans_Radar Sensor for best practices and functionality info) If the actual values are OK, please update the software.
- 10228609(SC)Replace Front Door Check
- 10228606(RC)Update Hermes Communication Module Software
- 10228601(RC)Update Park Lock Function
- 10228600(RC)Update Park Lock Function
- 10228599(RC)Update Park Lock Function
- 10222473Complaint Customer purchased pre-owned MY18-21 ex-Amazon Sprinter (SA code Z3A) and does not want Amazon specific Parameterizable Special Module (PSM) functions (driver alert, idle shutdown, radio mute, etc). IMPORTANT NOTES: Digital rear view display will no longer operate after Amazon specific PSM software is removed! MY18 will show the reverse camera image on the Audio 15 screen. MY19-21 will lose reverse camera functionality completely! Cause Strategic fleet customer removed the OEM rear view mirror with integrated reverse camera display to install an aftermarket digital rear view display that gets its power supply and reverse signal from PSM. When the Amazon-specific PSM software is removed, the aftermarket digital rear view display no longer has a power supply or reverse signal supplied by the PSM. It is not possible for the OEM PSM software to provide a power supply or reverse signal to the aftermarket digital rear view display. Remedy 1. Notify customer the aftermarket digital rear view display will not operate after PSM software is updated, AND: Reverse camera image will be displayed on the Audio 15 screen (MY18 ONLY) OR Aftermarket digital rear view display must be replaced with the OEM rear view mirror with integrated reverse camera display (MY19-21). 2. Perform software update of Parameterizable Special Module (PSM) using XENTRY > Adaptations > Control Unit Update > Updating of control unit software. This will remove fleet-specific PSM software and load the OEM PSM software from VeDoc. 3. MY19-21: Remove aftermarket rear view display and install OEM rear view mirror with integrated reverse camera display.
- 10217645(RC)Update Hermes Communication Module Software
- 10212903Ecall Hermes Software Update.
- 10212898Software updare.
- 10208740Complaint Operating unit for window lifter at door is nonfunctional. The problem currently only occurs at the driver's door. Cause Triggered by frequently opening and leaving the front doors open or frequently driving with an open window when it is raining, which results in water entering into the operating unit (window lifter). As this is a result of customer use, the replacement of the switch will not be covered under warranty. The switch cover will also not be covered under warranty as this is not a defect of the component. Remedy If the window switch is inoperable it will need to be replaced. Attach silicone cover trim over operating unit for sealing. Silicone trim has an adhesive strip and is affixed over operating unit. Bonding surface area must be cleaned and degreased prior to bonding.
Every Mercedes-Benz Sprinter 3500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.