2012 BMW Z4
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2012 BMW Z4. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
4 recalls name the 2012 BMW Z4. Newest first.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical…
An electrical short increases the risk of a fire.
Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America LLC (BMW) is recalling certain model year 2014 BMW 328i xDrive Sports Wagon, 2012-2014 BMW 320i Sedan, 328i Sedan, 320i xDrive Sedan, 328i xDrive Sedan, 2012-2013 BMW 528i Sedan, 528i xDrive Sedan, 2013-2014 BMW X1 sDrive28i, X1 xDrive28i Sports Activity Vehicle, 2013-2014 BMW X3 xDrive28i Sports Activity Vehicle, 2012-2014 BMW Z4…
A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
BMW will notify owners, and dealers will install a locking ring in the camshaft to retain the camshaft seal disk in the proper location, free of charge. The recall began on December 2, 2014. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America LLC (BMW) is recalling certain model year 2012-2014 320i, 328i, 320i xDrive, and 328i xDrive sedans; model year 2014 328i xDrive Sports Wagons; model year 2012-2013 528i and 528i xDrive sedans, model year 2013-2014 X1 sDrive28i and X1 xDrive28i vehicles and model year 2012-2014 Z4 sDrive28i roadsters. Due to insufficient lubrication…
A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
BMW will notify owners, and dealers will modify the vehicles to prevent insufficient vacuum pump lubrication, free of charge. The safety recall began on January 31, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
BMW IS recalling certain model year 2011 1-series active e and model year 2012 Z4 vehicles. variations in electrical current may occur within the electric power steering assistance system, leading to sudden loss of power steering assistance.
Sudden loss of steering assistance may increase the steering effort required to control the direction of a vehicle, increasing the risk of a crash.
BMW will notify owners, and dealers will replace the steering assistance module, free of charge. the safety recall began during july 2012. owners may contact BMW customer relations at 1-800-525-7417.
The contact owns a 2012 BMW Z4. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2012 BMW Z4. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2012 BMW Z4. The contact stated while driving approximately 10 MPH and turning to the left, the steering wheel seized, and the contact had to use force to return the steering wheel back to center. The contact stated that the failure occurred at various speeds while turning left or right. The contact stated that the vehicle was shuddering while the steering wheel was turned to the left or right. The vehicle regained normal steering functionality when the vehicle was stopped and turned off and restarted. The contact stated the "steering wheel" warning light was illuminated. The contact stated that the failure was a recurring failure. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the steering rack needed to be replaced. The vehicle was not repaired. The contact researched online and related the failure to NHTSA Campaign Number: 12V302000 (Steering). The manufacturer was not informed of the failure. The failure mileage was approximately 16,000.
The contact's wife owns a 2012 BMW Z4. The contact stated while driving approximately 70-75 MPH, the vehicle overheated and started decelerating independently. The contact depressed the accelerator pedal but the vehicle failed to respond. The warning message "Engine Overheat; Pull Over and Turn Off Vehicle" was illuminated. The contact veered to the side of the road and turned off the vehicle. The contact stated that upon restarting the vehicle, the vehicle was still overheating. The vehicle was towed to the dealer where it was diagnosed that the electrical coolant water pump, cooling thermostat, cooling hose, and the vent hose needed to be replaced. The vehicle was repaired. The contact referenced NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The manufacturer was not notified of the failure. The failure mileage was approximately 111,164.
Noticed whining noise from engine although it drives normally. BMW dealer confirms timing chain needs replacement. My car IS at 8 years, 66K miles - just over the 7/70 warranty extension for timing chain. I understand there IS a class action lawsuit still pending on this known issue. it has been dealership serviced since it was purchased with full records.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
In a letter dated September 26, 2013, BMW Group submitted a safety recall notice to NHTSA identifying a defect condition in the vacuum pump oil supply that may result in loss of power assist braking in 76,191 model year (MY) 2012 through 2014 BMW 3-Series, 5-Series, X1 SAV, X3 SAV, and Z4 vehicles equipped with 4-cylinder engines (NHTSA Recall 13V-454).According to BMW, movement of the seal disk within the camshaft may result in blocking of the oil supply to the vacuum pump, resulting in improper pump operation and loss of power assist braking.On July 11, 2013, BMW initiated a change to the camshaft geometry that prevented the seal disk from blocking the oil port.BMW has not received any braking complaints related to loss of power assist after the design change was implemented in production.The owners of all affected vehicles will be contacted by mail and asked to take their vehicle to a BMW dealer who will install a locking ring into the camshaft to keep the seal disk in its proper location.BMW expects to begin dealer and owner notification in November 2013 and complete dealer and owner notification in December when the remedy is expected to be available.Based on the actions taken by BMW, this investigation is closed.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.