2013 Chevrolet Colorado

Owner complaints

What owners report most

1. Power train1
2. Service brakes1

Latest complaints

• Sep 6, 2017OH26,000 mi
  Power train · Service brakes
  TL* the contact owns a 2013 chevrolet colorado. While driving various speeds, the transmission would independently shift from sixth to third gear. The contact stated that the failure only occurred when going down an incline and tapping the brake pedal. The vehicle was taken to a local dealer (jeff…

  TL* the contact owns a 2013 chevrolet colorado. While driving various speeds, the transmission would independently shift from sixth to third gear. The contact stated that the failure only occurred when going down an incline and tapping the brake pedal. The vehicle was taken to a local dealer (jeff wyler eastgate auto mall, 1117 OH-32, batavia, oh, 45103) where the cause of the failure could not be determined. The vehicle was not repaired. The manufacturer was not notified. The failure mileage was approximately 26,000. The vin was not available.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11011989This service bulletin provides information on the harmful effects of ethylene glycol in transmission fluid.
• 11011805This Preliminary information communicates a GM part number forreflective high temperature heat or insulating tape when repairing wiring harnesses.
• 11011782This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
• 11011709This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
• 11011205This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules.
• 11010545This service bulletin provides information on key code security rules and information on GM keycode look-up applications (U.S).
• 11010491This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
• 11010490This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 11010421This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
• 11009764This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
• 11009756This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
• 11009532This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 11009531This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 11009156This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
• 11009088This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
• 11009039This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
• 11008956This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
• 11008906This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
• 11008898The bulletin provides direction on how to locate the Temporary Service Part (TSP) form in GlobalConnect.
• 11007936This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
• 11007935This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
• 11007744This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 11007743This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 11007721This service bulletin provides information on AGM batteries that require less frequent charging in storage.
• 11007208This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 11007196This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
• 11007121This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
• 11007116This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
• 11007115This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
• 11007095This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
• 11007091This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 11006682This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 11006670This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 11006644This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
• 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
• 11006511This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
• 11006421GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
• 11006290This service bulletin provides information to dealership personnel on a new refrigerant (R1234yf) for A/C service.
• 11006282This service bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
• 11006278This service bulletin describes the U.S. Dealer Special Tool Loan Program process.

Every Chevrolet Colorado model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.