2009 Dodge Avenger
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Avenger › 2009
These records cover every 2009 Dodge Avenger. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2009 Dodge Avenger. Newest first.
Chrysler IS recalling 91 my 2009 sebring and dodge avenger equipped with 2.4L engine passenger vehicles. a compatibility issue between the instrument cluster software and fuel pump module can result in the fuel gauge overstating the actual fuel tank level. as a result, the vehicle may run out of fuel when the gauge indicates that there IS still fuel…
Risk and remedy
Risk
This could cause a crash without warning.
Remedy
Dealers will replace the fuel pump module free of charge. the recall IS expected to begin during march 2009. Owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling 712 my 2009 sebring, dodge caliber, avenger, journey, jeep patriot, and compass vehicles. a new adhesive used in the power train control module (pcm) manufacturing process can cause the printed circuit board to break.
Risk and remedy
Risk
This can cause the engine to stall and cause a crash without warning.
Remedy
Dealers will replace the pcm free of charge. the recall began on november 10, 2008. owners may contact chrysler at 1-800-853-1403.
Owner complaints
67 complaints3 involved a crash6 injuries
What owners report most
Latest complaints
- Service brakes
The anti lock brake system malfunctioned, the ABS, ESP/BAS and traction control lights are on. It kicked a code C2116 which reads ABS pump motor supply low voltage. I took it to a brake shop and they said the pump motor needs replaces but I would have to find one since they don’t stock it. I call…
The anti lock brake system malfunctioned, the ABS, ESP/BAS and traction control lights are on. It kicked a code C2116 which reads ABS pump motor supply low voltage. I took it to a brake shop and they said the pump motor needs replaces but I would have to find one since they don’t stock it. I call several Dodge dealers and was told the part is discontinued and no longer available. I searched on line for one and the only one available is a used one on eBay. Also if you research this it is a common malfunction on this year and other Dodge/ Chrysler vehicles. Anti lock brakes will not work until this is fixed and no parts available . Thank you
- Visibility/wiper
The contact owns a 2009 Dodge Avenger. The contact stated while driving at various speeds in the rain and snow, the windshield wipers shuddered and stopped working. The vehicle was taken to the local dealer, where it was diagnosed that there was corrosion detected and that the wiper motor needed to…
The contact owns a 2009 Dodge Avenger. The contact stated while driving at various speeds in the rain and snow, the windshield wipers shuddered and stopped working. The vehicle was taken to the local dealer, where it was diagnosed that there was corrosion detected and that the wiper motor needed to be replaced. The vehicle was repaired, but the failure recurred. While driving, the windshield wipers stopped in an upward position. The vehicle was taken back to the local dealer, who was unable to diagnose or repair the vehicle. The manufacturer was not contacted. The failure mileage was approximately 60,000.
- Visibility/wiper
I got this car may 13 2019 every since I had this car the wiper stop working when iam driveing in rain and snow. I took this car back to dealership in 2019 2020 and 2021 and they send me home and say there nothing wrong with the wiper. Now it 7/2022 it rain and the wiper stop again we could gotten kill on highway from columbus going back to spitzer moter tomorrow for the 4TH time
- Engine · Unknown or other
Two recalls on my part my car Power train: automatic transmission: control module (tcm, pcm) Fuel system, other: storage: fuel gauge system
- Air bags
Warning light airbags
- Air bags · Fuel/propulsion system
The pcmcia light comes on then goes off.car will some times chugs and wants to shut off in motion
- Seat belts
The driver seatbelt gets really loose and there IS no way to get it tightened. I have had to sit on it to make it tight enough around my waist.
- Engine
Intake manifold runner control was not opening and closing properly so I had to replace the intake manifold. *tr
- Power train
TL* the contact owns a 2009 dodge avenger. The contact stated that the vehicle failed to exceed 30 mph while driving without warning. The contact stated that the rpm revved to extremely high levels however, the vehicle failed to respond. The contact stated that the transmission was also slipping…
TL* the contact owns a 2009 dodge avenger. The contact stated that the vehicle failed to exceed 30 mph while driving without warning. The contact stated that the rpm revved to extremely high levels however, the vehicle failed to respond. The contact stated that the transmission was also slipping due to the powertrain control module needing to be replaced. The contact was also concerned that the powertrain control module was defective. The contact stated that the vin was not included in nhtsa campaign number: 08v528000 (power train). Daytona dodge chrysler jeep RAM & fiat (1450 n tomoka farms rd, suite a, daytona beach, fl 32124 386-274-0571) was informed of the failure. The manufacturer was contacted on several occasions and confirmed that the vehicle was subjected to an extended warranty on the power train however, the dealer declined to provide the repair. The vehicle was not repaired. Approximate failure mileage was 191,336.
- Structure › Body
Paint fade top car.you can see clear coat in spots
- Electrical system · Engine · Unknown or other
Started getting a obd code 2017 and 2004. After replacing the manifold runner control valve the light stayed on and now code says that the circuit IS high in bank one. I took off the runner control and tested it so it IS a good part,
- Power train · Service brakes · Steering
Going home from work, approximately 1 hour and 15 minutes from my job, and traveling at approximately 40-42 mph my engine just stopped....no sounds, no warning lights, nothing. just tried to up my speed to go up a very small incline, and nothing...headlights still worked, no power steering, no…
Going home from work, approximately 1 hour and 15 minutes from my job, and traveling at approximately 40-42 mph my engine just stopped....no sounds, no warning lights, nothing. just tried to up my speed to go up a very small incline, and nothing...headlights still worked, no power steering, no brakes.......managed to pull over.........shaking like a leaf on a tree, because I am 65 years old, alone, no family to call, no one.....and this was a little after 9PM at night on nov 2ND. Called my mobile mechanic the next day and he gave me this info to file a complaint. He said this IS very serious. I was on buford hwy <four lane road> speed limit 45 mph going straight and approaching a red light on a very small incline.
- Fuel/propulsion system · Unknown or other
Vehicle in motion most on highway and sometimes city streets. Sometimes the car will bog down usually between 40--65 mph when accelerating and also while not. Took to dealership they keyed it (test) and said manifold sensor or sensor about $1500.00 repair. Got this fixed and car still doing it.…
Vehicle in motion most on highway and sometimes city streets. Sometimes the car will bog down usually between 40--65 mph when accelerating and also while not. Took to dealership they keyed it (test) and said manifold sensor or sensor about $1500.00 repair. Got this fixed and car still doing it. This has been going on for at least 5 years that I know of. I don't drive vehicle all the time but when it gets drove it happens. The last time this happened was 2 weeks ago. Its was going on at about 50000 miles
- Power train
TL* the contact owns a 2009 dodge avenger. While driving 30 mph, the check engine warning indicator illuminated and the vehicle began to hesitate. The contact associated the failure with nhtsa campaign number: 08v528000 (power train). The contact was an independent mechanic who diagnosed that the…
TL* the contact owns a 2009 dodge avenger. While driving 30 mph, the check engine warning indicator illuminated and the vehicle began to hesitate. The contact associated the failure with nhtsa campaign number: 08v528000 (power train). The contact was an independent mechanic who diagnosed that the engine control module needed to be replaced. The vehicle was not diagnosed or repaired. A dealer was not contacted. The manufacturer was notified. The failure mileage was 79,500. *Tr*jb
- Engine · Power train
I was driving down the road and all of a sudden it was like the transmission shifted down to a lower gear, the engine reved up and then within a few mins stalled out. With no warning also all the warning lights were lit up. When I tried to restart the car it just clicked after jump start because…
I was driving down the road and all of a sudden it was like the transmission shifted down to a lower gear, the engine reved up and then within a few mins stalled out. With no warning also all the warning lights were lit up. When I tried to restart the car it just clicked after jump start because of trying to start it ...restarted but still was "stuck" in the low gear and stalled out again. I then called a tow truck and had it towed home. I looked up recalls for the year of the model and found the recall #H33- tcm/pcm was recalled on 712 models by vin it says mine isn't one of those but by description it did exactly as the recall describes. I was on a very busy interstate road during 4TH of july traffic and almost caused an accident trying to pull off the road as my car suddenly slowed down and then stalled
- Unknown or other
When I'm driving my vehicle on the highway,residential areas, on a freeway it will stall on me and turn off. When I'm turning the 2009 dodge avenger turns off as well this IS a really bad safety hazard myself or someone else can get seriously hurt. It also turns off while I'm at a stop light.
- Air bags · Service brakes
Air bag light constantly coming on and off, beeping, and sometimes just stay on. Brake lights continually come on - every few months for weeks at at a time. Also feels like car wants to give out a lot.
- Air bags · Fuel/propulsion system · Unknown or other
There IS a recall on the pcv on the year make and model and my check engine light IS reading that it IS bad but they say that my vin does not match for recall but yet my year make and model does
- Electrical system · Fuel/propulsion system · Vehicle speed control
The 2008 dodge aveneger had 6 recalls. My 2009 dodge avenger IS doing everything the 08 was recalled for.
- Vehicle speed control
I was driving out of the city on a street that changes from 25 to 35 mph, I begin to accelerate and the car stalls and the etc light illuminates. Then with more force on the pedal it only goes up to 10 to 15 mph. The car shakes and begins to act weird hard to stop to make a turn into a parking lot.…
I was driving out of the city on a street that changes from 25 to 35 mph, I begin to accelerate and the car stalls and the etc light illuminates. Then with more force on the pedal it only goes up to 10 to 15 mph. The car shakes and begins to act weird hard to stop to make a turn into a parking lot. I've almost was forced while braking to pulled in front of cars out of my control due to the jumping and shaking of the car. I then let it turn off after parking. I shut off all electric devices running on the car. I then turn of the fan for ac and heat. I then contact a local independent mechanic. The car was driven back with no stalling no limp mode but the light was still one. Once in the shop he ran the codes all 4 codes came on for etc but the light then goes off. Then it was cleared for a solid 30 minutes. I then drive home from the shop no light until 5 minutes after and no stalling at the time and parked my car in my driveway. I called the mechanic to let him know of the problem had occurred again. Working on price for me to repair. I've seen posted that this IS a common issue and happens randomly to people. I also see that the one part was later upgraded. Suggesting the original etc IS faulty. I contacted chrysler and was told this IS a common issue and that there IS no recall currently but I may or may not get a letter in the mail. I asked if there IS an investigation or a recall going on and was told that she would not know of this information. Yet this was the recall number for chrysler. I would not doubt they were aware of this and covered it up with the upgraded part to hide the fact that it was faulty from the beginning.
- Air bags
Air bags blew up when parrell parking bumped a car in front of me at 1 mile per hour and boom.
- Visibility/wiper
Wipers will stop in middle of windshield, or be jerky when moving. If stopped, moving wiper control to next position, or turning wipers back off, then on, will make wipers move a bit more. In a rain storm, have to constantly move wiper switch to make wipers move. Visibility IS a disaster. Makes driving in a rainstorm very dangerous.
- Engine · Fuel/propulsion system · Power train
I feel these. Recalls should be done on my car because I don't feel safe and was beg informed about any of them and my car IS having issues due to them
- Electrical system · Visibility/wiper
TL* the contact owns a 2009 dodge avenger. While driving approximately 70 mph, the contact attempted to roll down the front passenger side window when it suddenly slid down into the door. The contact was unable to roll the window back up. The contact took the vehicle to a certified mechanic who…
TL* the contact owns a 2009 dodge avenger. While driving approximately 70 mph, the contact attempted to roll down the front passenger side window when it suddenly slid down into the door. The contact was unable to roll the window back up. The contact took the vehicle to a certified mechanic who diagnosed that the mechanism that held the window up failed and needed to be replaced. The vehicle was repaired. While driving approximately 45 mph, the failure recurred to the front driver side window. The contact took the vehicle to the certified mechanic who diagnosed the same failure. The vehicle was not repaired. The manufacturer was not made aware of the failures. The approximate failure mileage was 82,000.
- Seat belts
Rear seatbelt buckles. the stitching that holds the loops to buckle / clasp disintegrated. my son was buckled in and I had to brake hard. seatbelt bucket came off clasp / away from vehicle and he hit back seat. checked other buckles and there were all worn out as well. I have the buckles still / replaced them but don't have pictures handy.*dt*jb
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10223512THROTTLE BODY For clarification, only use 68414676A$ on 2010 & earlier vehicles as supply is limited.
- 10221831(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10217736STAR Center News No. 78 - Jan/Feb 2013: Instead of limiting the use of the tether anchor to 48 pounds (child weight) the new guideline states that the tether anchor can be used with a seatbelt to install a child restraint up to the recommended weight limit of the child restraint.
- 10216395Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10216329Vehicle Exhibits Vibration From The Transmission During Vehicle Launch (X43 Warranty Extension 5 Years\160,000 KMS) This bulletin involves replacing the clutch and damper assembly. The customer may experience a vibration feeling as they accelerate from a stop or accelerating while rolling at slow speeds. This condition could be caused by the damper and clutch.
- 10191460Valve Body. These may cause over drive cycling.
- 10189200STAR Center News No. 78 - Jan/Feb 2013: Instead of limiting the use of the tether anchor to 48 pounds (child weight) the new guideline states that the tether anchor can be used with a seatbelt to install a child restraint up to the recommended weight limit of the child restraint.
- 10180221(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- 10177457THROTTLE BODY For clarification, only use 68414676A$ on 2010 & earlier vehicles as supply is limited.
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10166537RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
- 10139985Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10139978Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10138987Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10136933Part Description: Short Runner Valve (Actuator) Issue Description: Issue 1~ JC,JS '08-09MY 3.5L only~ Caution - Do not replace the intake manifold for a short runner valve (SRV) fault (P1004 / P2008 / P2016 / P2017) or for a manifold tuning valve (MTV) fault (P1005 / P2077 / P2078). Instead follow the service procedure to investigate P codes associated with diagnosis of the SRV or MTV, then cycle the actuator using a diagnostic tool and verify that the PWM output is 50 (+ 2%) de-energized and 80 (+ 2 %) energized. If no problems observed, then idle the vehicle and verify the correct PWM output (50 + 2% PWM). Replace the actuator if you do not get the desired output. Issue 2~ If the SRV actuator or intake manifold is being replaced for a P1004 Short Runner Valve Performance fault code and the vehicle was built prior to 2/5/07 , technicians must complete the module reflash and verification test per TSB 18-003-07 REV. A to ensure the parts need to be replaced. Please reference TSB 18-003-07 REV. A for specific details on the procedure.
- 10136452Vehicle Exhibits Vibration From The Transmission During Vehicle Launch (X43 Warranty Extension 5 Years\160,000 KMS) This bulletin involves replacing the clutch and damper assembly. The customer may experience a vibration feeling as they accelerate from a stop or accelerating while rolling at slow speeds. This condition could be caused by the damper and clutch.
- 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10128914Vehicle Exhibits Vibration From The Transmission During Vehicle Launch (X43 Warranty Extension 5 Years\160,000 KMS) This bulletin involves replacing the clutch and damper assembly. The customer may experience a vibration feeling as they accelerate from a stop or accelerating while rolling at slow speeds. This condition could be caused by the damper and clutch.
- 10121927NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
- 10032785Dodge/chrysler: re-torque decklid latch bolts. Certain vehicles were shipped with the incorrect torque on the decklid latch mounting bolts and will require re-torque to 10NM (88.50 in lb).
- 10032766Chrysler/jeep/dodge: california emissions warranty addendum. The warranty book on certain vehicles may contain errors or may be missing information regarding the coponents covered by the california emissions warranty. Dodge-caravan/grand caravan, charge/charger SRT8, magnum/magnum SRT8, viper, avenger, nitro, challenger/challenger SRT8, durango/durango hybrid, journey, RAM 2500/3500, caliber/caliber SRT4; jeep commander, grand cherokee/grand cherokeesrt8, compass, patroit, liberty; chrysler town&country, pacifica, 300 SRT8, ptcruiser, sebring/sebring conv., aspen/aspen hybrid.
- 10030888Chrysler/jeep/dodge: flash-driveability improvements or mil illumination diagnostic trouble code p0452-evap pressure switch stuck closed. Includes MY09 town&country; voyager and caravan.
- 10028832Chrysler\dodge service campaign: see document search button for owner letter. An incorrect positive crankcase ventilation (pcv) valve may have been installed. An incorrect pcv valve can cause excessive exhaust emissions. Csc letter was received.
Every Dodge Avenger model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.