2009 Mercedes Benz E320
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes Benz › E320 › 2009
These records cover every 2009 Mercedes Benz E320. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2009 Mercedes Benz E320. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.
Risk and remedy
Risk
A detached sunroof panel can become a road hazard, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the sunroof panel as necessary, free of charge. Owner notification letters were mailed January 10, 2025. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of previous NHTSA recall number 22V-954. MBUSA's number for this recall is 2024120001/2/3.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please refer to MBUSA's recall report for specific vehicle model details. The glass sunroof panel may not be properly secured and may detach.
Risk and remedy
Risk
A detached sunroof panel may become a road hazard, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the sunroof panel as necessary free of charge. Owner notification letters were mailed February 3, 2023. Owners may contact MBUSA customer service at 1-800-367-6372. This recall expands NHTSA recall number 19V-918. MBUSA's numbers for this recall are 2023010004, 2023010005, and 2023010006.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2001-2011 vehicles. The bonding between the glass panel and the sliding roof frame may deteriorate, possibly resulting in the glass panel detaching from the vehicle. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V918-4126.pdf
Risk and remedy
Risk
A detached glass panel can separate from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
MBUSA will notify owners, and dealers will inspect the glass panel bonding and replace the sliding roof, as necessary, free of charge. The recall began July 10, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020040011.
Owner complaints
8 complaints
What owners report most
Latest complaints
- Structure › Body
Checking on unrepaired recall nhtsa#19v91832/recall#2019120012. This recall described as problem with bonding between glass panel and the sliding roof frame, which could lead in separation of the glass panel from the vehicle. I interpret this to be the sunroof glass detaching from the frame…
Checking on unrepaired recall nhtsa#19v91832/recall#2019120012. This recall described as problem with bonding between glass panel and the sliding roof frame, which could lead in separation of the glass panel from the vehicle. I interpret this to be the sunroof glass detaching from the frame endangering others. This recall appears to be open on my vehicle. Please advise any further information. I have had no problems thus far.
- Engine · Vehicle speed control
TL* the contact owns a 2009 mercedes-benz E320. While driving various speeds, the vehicle failed to accelerate when the accelerator pedal was depressed. There were no warning indicators illuminated. The hesitation was persistent. The dealer diagnosed that the inlet port shutoff motor and linkage…
TL* the contact owns a 2009 mercedes-benz E320. While driving various speeds, the vehicle failed to accelerate when the accelerator pedal was depressed. There were no warning indicators illuminated. The hesitation was persistent. The dealer diagnosed that the inlet port shutoff motor and linkage failed and needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was approximately 64,818.
- Engine
The oil cooler on the vehicle IS leaking oil. this IS a large, 15 hour repair, the total estimate to replace the cooler and seals IS $2350. I have not had this repair done yet. also had other oil seals replaced in the turbo area of the engine which cost me $989.91.
- Fuel/propulsion system
Fuel leak from the seal on fuel pump in the fuel tank. Small pad of fuel on a driveway when the tank IS full. Odor smell with a/c on. *tr
- Fuel/propulsion system
I was changing lanes and went to accelerate when the vehicle completely lost power. The cause of the loss of power IS a plastic(yes plastic) rod that opens the intake to initiate turbo boost. The fact that his rod IS made of plastic that can break so easily when you step on the gas pedal IS…
I was changing lanes and went to accelerate when the vehicle completely lost power. The cause of the loss of power IS a plastic(yes plastic) rod that opens the intake to initiate turbo boost. The fact that his rod IS made of plastic that can break so easily when you step on the gas pedal IS dangerous. Mercedes benz IS supposed to make a quality car that IS very costly and it IS shameful that it IS made so shoddy creating a false sense of safety and quality. I am lucky to be alive and now have to fix this junk. *tr
- Exterior lighting
The wiring in the trunk that goes to the rear brake and license plate lights failed and opens the trunk failed. It was not possible to open the trunk with the remote or the button in the car. The only way was to use the valet key. There was also a warning in the dash about all of these lights being…
The wiring in the trunk that goes to the rear brake and license plate lights failed and opens the trunk failed. It was not possible to open the trunk with the remote or the button in the car. The only way was to use the valet key. There was also a warning in the dash about all of these lights being out. I took the car to a repair shop and they found the ground wire in the wiring harness between the trunk liner and the trunk lid had broken due to excessive wear. *tr
- Engine and engine cooling · Fuel system, gasoline
Dear officer, from the beginning (2010 august, 0 mileage, mb E320) the car has a chemical smell. at first, I thought it will go away. however, in few months it became the most awful chemical smell (it IS not mold, diesel fuel or exhaust). This extremely penetrating chemical(s) is/are coming from…
Dear officer, from the beginning (2010 august, 0 mileage, mb E320) the car has a chemical smell. at first, I thought it will go away. however, in few months it became the most awful chemical smell (it IS not mold, diesel fuel or exhaust). This extremely penetrating chemical(s) is/are coming from carpet. Venting/air-recirculation increases chemical concentration in the compartment to extreme levels. the chemical(s) is/are definitively toxic give strong headache, dizziness, cause nausea, vomiting, light-headedness, cause and activate asthma (personal complains) and other problems (google search). Deterioration components of synthetic organic compounds are known inducers of carcinogenesis. I will be happy to provide additional information on health issues. based on google search chemicals in the car compartment are common problems of mercedes, volkswagen and BMW. The dealership rep agreed wit chemical smell. They offer chemical/deodorizer treatment what I am hesitant to accept as chemical odor reappear in few weeks (google search). Also many chemical deodorizer' are toxic (u.s. Environmental protection agency and the consumer product safety commission). based on google search the sound proofing under the carpet IS the source as it decompose in these vehicles and release the toxic chemical. Dealership agrees the source of chemicals but they do not agree to change sound proofing (although they admit this common problem in mercedes). I respectfully ask national highway traffic safety administration at u s department of transportation to investigate this health issue caused by decomposition of sound proofing. This IS an issue that severely effecting safety of driving and importantly well-being of us citizens. sincerely, on behalf of many us citizens. *tr
- Electrical system · Fuel system, diesel
2 highway stallings: 1) DEC.1. 2009 traveling on I-95 south at 70mph, check engine light on, car suddenly stalled, managed to pull to shoulder. Car towed to benz dealer 90 miles away. They changed a new fuel pump in charleston, sc. Continued driving on 2) dec.3,2009, after 400+ miles on I-95 south…
2 highway stallings: 1) DEC.1. 2009 traveling on I-95 south at 70mph, check engine light on, car suddenly stalled, managed to pull to shoulder. Car towed to benz dealer 90 miles away. They changed a new fuel pump in charleston, sc. Continued driving on 2) dec.3,2009, after 400+ miles on I-95 south at 70mph, check engine light on, car suddenly stalled again, managed to pull to shoulder. Car towed to benz dealer in melbourne, florida. They changed another fuel pump and filter. Now I am driving with my finger crossed. *Tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
- 11008323Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove headlamps. 2. Remove all grommets from outlet openings. 3. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation diaphragm to work properly! 4. Remove existing service cover. 5. Place desiccant packs into the new service covers and bolt down (Picture_01). 6. Glue the new diaphragm onto the intended surface at the service cover (Picture_02). Note: The bonding surface must be clean and dry. 7. Attach service cover with desiccant pack at headlamp. 8. Install headlamp. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_03). 2. The new transparent diaphragm must be correctly bonded (Picture_04). 3. Check headlamp housing for any external damage.
- 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
- 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
- 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
- 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
- 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
- 10235972Enclosed for your information and pursuant to part 579.5, please find our latest Service and Warranty Bulletins for March, 2016
- 10219252In our continuing efforts to assure the proper performance of Mercedes-Benz products and to enhance the satisfaction of our customers, Mercedes-Benz AG (MBAG), the manufacturer of Mercedes-Benz vehicles, is extending the warranty coverage on the fuel filter unit in certain Model Year (MY) vehicles listed below from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 15 years/150,000 miles (whichever occurs first) due to the following condition: The fuel filter unit might need to be replaced due to minor fuel seepage at the fuel filter flange that could result in fuel odor and/or an activation of the check engine Malfunction Indicator Lamp (MIL). Note that a risk of fire has been ruled out based on the nature of the fuel seepage and the distance to hot components. The vehicles will be visible and flagged in VMI as OPEN on June 10, 2022
- 10215214In our continuing efforts to assure the proper performance of Mercedes-Benz products and to enhance the satisfaction of our customers, Mercedes-Benz AG (MBAG), the manufacturer of Mercedes-Benz vehicles, is extending the warranty coverage on the fuel filter unit in certain Model Year (MY) vehicles listed below from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 15 years/150,000 miles (whichever occurs first) due to the following condition: The fuel filter unit might need to be replaced due to minor fuel seepage at the fuel filter flange that could result in fuel odor and/or an activation of the check engine Malfunction Indicator Lamp (MIL). Note that a risk of fire has been ruled out based on the nature of the fuel seepage and the distance to hot components.
- 10205233Mobile phone cotacts are not transferred completely.
- 10205225Headlamps fogged.
- 10186142Unmotivated Reaction from Park Assist - model series 213 facelift / 238 facelift with option code 235 (active par- king assist) and option code 501 (surround view system)
- 10186141NTG5.5: Incorrect time shown on instrument cluster, COMAND display, and analog clock
- 10186135If the customer brakes sharply from a speed of > 30mph, without ABS intervention, there is a single cracking noise from the area of the ESP hydraulic unit
- 10181124Harsh engagement when changing gear range from P to D or R
- 10181123Harsh engagement when changing gear range from P to D
- 10179951AIRMATIC Fault Message "Max 80 km/ h (50 mph) " In Instrument Cluster
- 10177571Lamp unit fogged or droplets forming. Due to the vent openings, the lamp unit is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate it. This can result in deposits on the diffuser and lens. Check housing cover of lamp unit for natural fogging or dew as per GI82.10-P-009047. . 1. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. 1.1. Order the required service covers by referring to the variant overview. 1.2. Remove lamp unit 1.3. Remove all grommets from vent openings. 1.4. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation membrane to work properly! 1.5. Remove existing service cover 1.6. Place desiccant packs in new service covers and bolt down 1.7. Stick new diaphragm onto specified surface on service cover [picture of service cover] Note: The bonding surface must be clean and dry. 06
- 10176670To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a settlement regarding claims relating to alleged mold and mildew type odors originating from the HVAC system in certain Mercedes-Benz vehicles. As part of the settlement, MBUSA has agreed to offer sliding-scale warranty coverage for certain vehicles diagnosed as having mold or mildew type odors originating from the HVAC system?although that coverage will not take effect until the settlement is judicially approved and other events occur; likely not until December 7, 2020 at the earliest (see below). If the settlement becomes effective, coverage will include cleaning of the evaporator and replacement of the HVAC filters
- 10167572If it is necessary to replace an HV battery, the return will only be accepted with the filled-out ?Analysis Sheet for Transportability of High-Voltage Batteries Form? accompanied by: , the removed part, the quick test printout, the BMS control unit log printout, the repair documentation and with all required documentation listed in Section E of the Form.
- 10167569Switch for seat belt extender inoperative.
- 101675671. Noises when operating electric seat fore/aft adjustment 2. Electric fore/aft adjustment nonfunctional 3. Adjustment is biased to one side, which bends the seat frame
- 10167566The side air vents in the instrument panel may be reflected in the side windows in sunlight
- 10167564Customer experiences low battery conditions, resulting in jump starts, and eventually requiring battery replacement.
- 10167563The COMAND unit does not start or the COMAND display remains dark. The COMAND unit cannot be operated. Note: The problem disappears after a lengthy idle period (>6h) or after interrupting the power supply (circuit 30).
- 10167561Xenon burner inoperative or flickers
- 10167556Glove box squeaks/rattles at top left mounting.
- 10167554Engine diagnosis warning lamp activated. Fault code P045600 "Very fine leak" or P044200 "Fine leak" stored in engine control unit.
- 10167553Combination message: "Clean fuel filter" is displayed. The fault code 162500 (water level message - Bosch) or P226997 (water level message - Delphi) or 171600 (filter load - Bosch) is stored in the engine control unit.
- 10167552Engine does not start, or various fault messages in instrument cluster immediately after engine start and servo assistance is reduced. The following display messages may appear: - Red message "Power Steering Malfunction - See Operator's Manual" including acoustic warning - Red or yellow message "ESP / ABS Currently Unavailable - See Owner's Manual", sometimes with acoustic warning - White message about tire pressure monitor or run flat indicator: "Tire Pressure Loss Warning Defective" or "Tire Pressure Monitor Defective" In addition, the indicator lamps of the following systems may light up: - Brakes / ABS / ESP / ESP Off / engine diagnosis Furthermore: - The chassis CAN is partially or completely disrupted - Several control units (e.g. the electric power steering, ESP, engine etc.) cannot be interrogated or are not listed in the quick test - Various CAN communication errors from other control units may be logged (see list "Control unit / Fault code")
- 10167547Shift quality complaints and/or automatic transmission in limp-home mode in combination with one or more of the following fault codes: P060600, P072200, P072300, P072364, P072900, P073000, P073100, P073200, P073300, P073400, P073500, P076F00.
- 10167525Apple products (iPhone or iPod) are not charged via the serial USB interface of the COMAND Online control unit (A40/3) in the stowage compartment of the center console.
- 10167040This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the mbrace software does not correspond to current production configuration. An authorized Mercedes-Benz dealer will update the mbrace control module software at the next workshop visit.
- 10167015The key is not recognized in the electronic ignition switch, the vehicle cannot be started and/or the automatic transmission may perform an "Automatic P function" at speeds below 6 km/h.
- 10167009Battery discharged, vehicle does not start.
- 10167000Surface damage on steering wheel trim
- 10166994Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). Heard once when changing from forward to reverse (and vice versa)
- 10166976Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual"
- 10166975This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014.
Every Mercedes Benz E320 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.