1991 Nissan Maxima
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Nissan › Maxima › 1991
These records cover every 1991 Nissan Maxima. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 1991 Nissan Maxima. Newest first.
Dope, inc. IS recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on july 28, 2009. owners may contact dope, inc. At 1-626-272-1798.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Pro-a motors will notify owners and offer to repurchase the lamps. the recall began on april 3, 2006. owners may contact pro-a motors at 323-838-2988.
It IS possible for a mixture of mud and salt to get trapped between the fuel filler tube and wheel housing. The trapped mud and salt can result in corrosion of the fuel filler tube and the wheel housing.
Risk and remedy
Risk
Significant corrosion of the fuel filler tube may result in fuel leaks which in the presence of an ignition source could result in a fire. In addition, the left rear seat belt retractor IS mounted to the wheel housing and in the event of significant corrosion, and the mounting could fail in a vehicle crash.
Remedy
Dealers will inspect these vehicles and corrective action will be taken depending upon the extent of the corrosion.
Owner complaints
76 complaints8 involved a crash2 involved a fire9 injuries
What owners report most
Latest complaints
- Seat belts › Rear/other
TL* the contact owns a 1991 nissan maxima. The contact stated that the rear seat belt assembly was corroded. The vehicle was not diagnosed or repaired.the manufacturer was notified of the failure. The approximate failure mileage was 370,000.
- Seat belts
Going about 45 mph and hit 2 parked cars. Drivers side seatbelt didn't catch. *tr
- Fuel system, gasoline
TL* the contact owns 1991 nissan maxima. The contact stated that the vehicle was taken to a local mechanic shop for concerns with the fuel lines. The mechanic advised that there was rust and corrosion of the tank, which would need replacing along with the pipe filler. the dealer was contacted and…
TL* the contact owns 1991 nissan maxima. The contact stated that the vehicle was taken to a local mechanic shop for concerns with the fuel lines. The mechanic advised that there was rust and corrosion of the tank, which would need replacing along with the pipe filler. the dealer was contacted and stated that her vin was not included in the recall associated with nhtsa campaign ID number: 95v244000, (fuel system, gasoline: storage: tank assembly: filler pipe and cap). the manufacturer was contacted and confirmed that the vehicle was not under recall and offered no further assistance. The failure mileage was 186,000.
- Fuel system, gasoline
TL* the contact owns a 1991 nissan maxima. The contact stated that the straps connected to the fuel tank fractured because of corrosion and the vehicle was taken to an independent mechanic. The mechanic discovered that the filler cap assembly was corroded and that the muffler could not be replaced…
TL* the contact owns a 1991 nissan maxima. The contact stated that the straps connected to the fuel tank fractured because of corrosion and the vehicle was taken to an independent mechanic. The mechanic discovered that the filler cap assembly was corroded and that the muffler could not be replaced because of the fuel leak caused by the corrosion from the tank assembly. The mechanic referenced nhtsa campaign number: 95v244000 (fuel system), but the contact was told by the manufacturer that the recall was expired and the vehicle was not included. In addition, the odometer was inoperable. The failure and current mileage was unknown.
- Fuel system, gasoline › Storage › Tank assembly › Filler pipe and cap
Dealer performed recall campaign no. 95V244000. A few years later the gas filler tube IS still leaking gas. I took the vehicle back to the dealer and they said they could not fix it because they do not warranty prior recall work. Can the dealer refuse to fix it a second time ? Shouldn't they fix it to prevent the problem from occurring again. Thank you . *tr
- Seat belts › Front
Shoulder belt does not lock, anymore, on those very sudden stops or with sneezes, like it used to, and the red seatbelt light on dash stays on. dealer confirmed that it IS not working. says nissan isn't responsible for seatbelts to work in older cars. *tr
- Electrical system › Alternator/generator/regulator
We have a 1991 nissan maxima. On tuesday, dec. 13, 2004 it burned up under the hood and melted everything to a crisp. The fire department said they were not sure if it was the fuel injector that caused it to ignite. We were on our way to school, and it smelled like gas fumes, then it quelled…
We have a 1991 nissan maxima. On tuesday, dec. 13, 2004 it burned up under the hood and melted everything to a crisp. The fire department said they were not sure if it was the fuel injector that caused it to ignite. We were on our way to school, and it smelled like gas fumes, then it quelled down, about 10 minutes later it started to smoke. We opened the trunk first to get a rag and then the hood turned black, and in 1 minute. It started to blaze. None of the body of the car was damaged except the hood, and everything under it melted to a crisp. Could this be a defect please give me a guess. Thanks for your time. *Ak
- Back over prevention › Warnings › External/pedestrian alert · Exterior lighting › Headlights › High/low beam dimmer switch · Fuel system, gasoline · Latches/locks/linkages › Hood › Latch · Power train › Clutch assembly · Seat belts › Front · Steering › Hydraulic power assist system · Visibility › Power window devices and controls
Power steering hose split...replaced part...currently experiencing very loud noise and "burnt" smell coming from power steering pump...when fluid in pump IS replaced, the color of the fluid becomes black in no time; also experiencing strong gas fumes inside car esp. When heat or a/c IS turned on…
Power steering hose split...replaced part...currently experiencing very loud noise and "burnt" smell coming from power steering pump...when fluid in pump IS replaced, the color of the fluid becomes black in no time; also experiencing strong gas fumes inside car esp. When heat or a/c IS turned on; front seat belts do not function properly...either too tight or too loose...seat belt light & chime goes on and off all the time; driver's seat has broken...had it repaired; driver's side windows will not go down; sunroof leaks when it rains; hood latch does not allow hood to close properly, while the hydrolics under the hood will not keep the hood up when opened...hood slammed down onto service tech's arm and onto anothers head; sometimes vibrates loud when braking; high-pitch clitter-clatter coming from rt-frt wheel; odometer will not work after several attempts to fix; battery acid drip damage on starter; transmission dis-mounted, had replaced, but currently experiencing oil leakage @ main seal; cv joints, ball bearings, axle, clutch assembly, all replaced at least 3-4 times. Ok...if that's not enough, I don't know what is...i am hoping for some recall info on the fuel leakage and seatbelt issues! I have no fundage left for anymore repairs. My 10 year old son IS a frequent passenger in this vehicle...i am seeking any info on how to make this car more safe for us on the roads...until I can afford to purchase another car. (Also, car alarm goes off every time doors are locked; and headlights will not brighten, they stay on dim...when switch IS clicked at column, headlights completely go out!). *ak
- Seats · Vehicle speed control
Crash. while backing out of parking spot in driveway. Engine went full throttle 30 feet across driveway and struck a tree. both feet on brakes trying to stop car. drivers seat broke. car IS not repairable. exact same accidents as oci claim #'s 483257 and 889677. *la
- Air bags
While driving vehicle fish tailed. This resulted in consumer losing control of the vehicle. it went over a ravine, flipped twice, hit a tree, and a concrete wall before landing in a creek. upon impact, driver's side air bag failed to deploy. vehicle IS totaled. *Ak
- Fuel system, gasoline › Fuel injection system › Injectors
I have a 1991 nissan maxima. it IS leaking fuel from the fuel injectors and I am afraid it may catch on fire. please help me. *la
- Engine and engine cooling › Exhaust system › Manifold/header/muffler/tail pipe
Consumer states exhaust manifold and studs failed. *tt
- Structure › Body › Hatchback/liftgate › Support device/strut
Consumer put hood up and hydraulic hood struts gave way, and consumer's head got stuck underneath the vehicle. also, nose was scratch up and swollen.*ak
- Fuel system, gasoline › Fuel injection system › Injectors
Fuel injectors defective, replace multiple times on the model. *Ak
- Electrical system › Wiring › Fuses and circuit breakers
I have noticed on countless nissan maximas (early 90 models) that two or fewer brake lights out of four actually light when brakes are pressed which IS obviously caused by an electrical problem because the other rear lights dim out.*ak
- Seat belts › Front › Buckle assembly
Upon placing my daughters carseat in the middle of my backseat the seatbelt fell completely apart. Therefore that makes me think something IS faulty with it. If it came apart that easily from me trying to buckle in the carseat what would happen if someone hit me. My daughter could have been…
Upon placing my daughters carseat in the middle of my backseat the seatbelt fell completely apart. Therefore that makes me think something IS faulty with it. If it came apart that easily from me trying to buckle in the carseat what would happen if someone hit me. My daughter could have been seriously injured or worse killed if this had happen in a collision. I f my car did this how many others will it happen to and will any children have to die before anything IS done. I only want for my family to be safe and therefore I try to do the right thing by placing my daughter in the middle of my back seat.*ak
- Vehicle speed control › Accelerator pedal
Vehicle accelerated suddenly when the consumer took foot off of brake pedal and lightly touched accelerator pedal. vehicle went out of control to left, impacted a parked vehicle, and continued to accelerate into a concrete pillar. insurance adjuster determined that driver was at fault by…
Vehicle accelerated suddenly when the consumer took foot off of brake pedal and lightly touched accelerator pedal. vehicle went out of control to left, impacted a parked vehicle, and continued to accelerate into a concrete pillar. insurance adjuster determined that driver was at fault by looking at the vehicle. a dealership nor a mechanic hav examined vehicle to determine a cause of defect. please provide any additional information/attachments.*ak
- Engine and engine cooling › Engine › Gasoline
While idling in the driveway the vehicle spontaneously caught fire, possibly engine related. nlm
- Electrical system › Wiring › Interior/under dash
Complete electrical system failue, without warning. vehicle lossed all power in the middle of operation, fuses blew and components such as cruise control, power window motors were destroyed. Cause of problem unkown, estimate to repair far exceeded value of vehicle.
- Electrical system › 12v/24v/48v battery · Engine and engine cooling › Exhaust system › Emission control
Emission vapor canister has several leaks, caused by battery acid drip, causing very strong raw gasoline smell engulfing vehicle, especially during hot weather in so. Ariz. Very noticeable when stopped. Fumes enter passenger compartment if a/c vent open, becomes nausiating. Battery drip has no specific drainage area, spilling on canister and other areas causing mess.
- Seats › Front assembly › Recliner
While driving front driver's seatback collasped, causing the driver to fall backwards. The dealer has been contacted. *ak
- Fuel system, gasoline › Fuel injection system › Injectors · Suspension
Whenever driving vehicle would be rough. vehicle would start to shake & make noises. Took vehicle to dealership & was informed by the mechanic #2, #3 & #5 fuel injectors had gone bad & needed replacing. *ak
- Fuel system, gasoline › Carburetor system
While air vent was turned on noticed fumes inside vehicle. Dealer has noticed that the exhaust manifold needed to be replaced. *ak
- Exterior lighting › Tail lights
Tail light holder that IS supposed to hold the light broke, and tail lights melted. please provide any futher information. *ak
- Electrical system › Wiring › Fuses and circuit breakers
Plastic holder that holds four bulbs melted, also, two of the wires melted. *ak
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
- 1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
- 10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
- 10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192305SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
- 10192233Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletinfor further detail.
- 10192217If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see NTB00-033). See this bulletin for further detail.
- 10192216SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake incident based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific incident. See this bulletin for further details.
- 10192145SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
- 10188377STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10185459AIR BAG DEPLOYMENT PROCEDURE This bulletin is no longer active. Please discard previous versions of NTB92-096.
- 10051767Nissan: lock/unlock request button on outside handle does not respond.
- 10032506Nissan: vent control valve replacement. When replacing the evap canister vent control valve for reason: use the one listed on page 2; for vent control valve replacement procedure, refer to the appropriate section of the electronic service manuals (esm; when installing the new valve, do not add any lube to its o ring; for frontier (D40 series) only, install the protector listed in parts information. Includes 2005-09 frontier. Updated 12/8/10.
- 10031305Nissan: tire pressure monitoring system (TPMS) warning light on/flashing. No models or model years listed. Updated on 08-11-2011.
- 10030165Nissan: the 12 volt battery IS an important part of the vehicle electrical system and IS required to stay connected when the engine IS running. To prevent damage to vehicle electronic components follow the instructions/cautions. No model years listed.
- 606182Key value brake pad service information.
- 604301Service information on key value brake pads.
- 45008New non-asbestos replacement pads and shoes.
- 39652New non-asbestos brake pad.
Every Nissan Maxima model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.