2009 RAM 1500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2009 RAM 1500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2009 RAM 1500. Newest first.
Chrysler (FCA US LLC) is recalling certain 2009-2012 Dodge Ram 1500 trucks currently, or ever registered, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia.…
Risk and remedy
Risk
If the fuel tank were to drop and contact the ground, a fuel leak may result. Additionally, in the event of a crash, the fuel tank may not remain secured to the vehicle, possibly causing a fuel leak. A fuel leak in the presence in an ignition source, can increase the risk of a fire.
Remedy
Chrysler will notify owners and dealers will bolt a bracket reinforcement to the frame, free of charge. The recall began May 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U04.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the…
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Owner complaints
37 complaints2 injuries
What owners report most
Latest complaints
- Power train
The contact owns a 2009 Ram 1500. The contact stated that upon purchasing the vehicle, it was discovered that there were two open recalls on the VIN, NHTSA Campaign Number: 13V038000 (Power Train) and 17V821000 (Power Train). The contact scheduled an appointment with a dealer, and the vehicle was…
The contact owns a 2009 Ram 1500. The contact stated that upon purchasing the vehicle, it was discovered that there were two open recalls on the VIN, NHTSA Campaign Number: 13V038000 (Power Train) and 17V821000 (Power Train). The contact scheduled an appointment with a dealer, and the vehicle was repaired under the recall. Upon picking the vehicle and exiting the parking lot, the contact heard an abnormal whining sound coming from the vehicle, and the check engine warning light illuminated. The vehicle was taken back to the dealer and remained with the dealer. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 120,000.
- Suspension
I bought this 2009 Dodge ram Laramie about a year ago been riding like new but 4 days ago starting to hear a bad whining noise from the rear end and I see this truck had a recall on the pinion nut I think it's coming lose from the pinion
- Visibility › Defroster/defogger/hvac system › Windshield › Electrical heating element
The contact owns a 2009 Ram 1500. The contact stated that the air conditioner, heater, and defogger were inoperable. The climate control warning light was not illuminated. The contact replaced the climate control module; however, the failure persisted. The manufacturer was not notified of the failure. The approximate failure mileage was 200,000.
- Structure › Body
Frame rail has rusted out causing this vehicle unsafe to drive. A quick google search showed this a common problem. I know Mercedes Benz have recalled rusting brake boosters and provided extended warranty on rear subframe rust. Toyota has recalled truck frames. Dodge is ignoring this issue.
- Fuel/propulsion system
In researching the vin for my vehicle, a 2009 Dodge Ram 1500, it shows there are no recalls on it but I've recently found that the front fuel tank bracket has rusted out of the frame of the vehicle I believe this VIN should fall under Safety Recall U04 / NHTSA 18V-160 Frame Bracket. This is the…
In researching the vin for my vehicle, a 2009 Dodge Ram 1500, it shows there are no recalls on it but I've recently found that the front fuel tank bracket has rusted out of the frame of the vehicle I believe this VIN should fall under Safety Recall U04 / NHTSA 18V-160 Frame Bracket. This is the subject of that Safety recall which has impacted my vehicle: The front fuel tank strap on about 287,000 of the above vehicles may detach due to the frame bracket corroding. Detachment of the front fuel tank strap could potentially allow the front of the fuel tank to make contact with the ground, increasing the risk of a fuel leak. A fuel leak in the presence of an ignition source could result in a fire.
- Electrical system · Engine
When driving the vehicle at lower speeds, usually between 25 to 38 mph, the engine will surge for about 1 to 2 seconds then back to normal as long as I remain in that speed range. It happens each time within that range of speed.
- Fuel/propulsion system · Power train · Steering
I purchased this vehicle from a private party and insured it and my insurance offers free carfax after checking through its history i see that it has 2 pending recalls and one of them has a buyback program, i called dealerships and the Chrysler warranty phone number but they do not want to buy it…
I purchased this vehicle from a private party and insured it and my insurance offers free carfax after checking through its history i see that it has 2 pending recalls and one of them has a buyback program, i called dealerships and the Chrysler warranty phone number but they do not want to buy it back even though that is one of the remedy's , the main problem is with the driveshaft which can separate due to a axle pinion bolt and cause an accident i really do not want to deal with these recalls and would rather go with the available option of having it repurchased from chrysler
- Electrical system
Tipm causing horn to work not work goes off by itself. Locks don’t work windshield wipers stop working or don’t work at all. Airbags not working. Caused battery to overcharge and begin to smoke. Replaced battery
- Unknown or other
The hvac System behind dashboard stopped working and there is no air or heat it keeps making a loud clicking noise for about 1 minute and goes away and then 5 minutes later it does it again for another 5 minutes I took to a shop the said the hvac system behind the dash went out and you have to…
The hvac System behind dashboard stopped working and there is no air or heat it keeps making a loud clicking noise for about 1 minute and goes away and then 5 minutes later it does it again for another 5 minutes I took to a shop the said the hvac system behind the dash went out and you have to remove the whole dashboard and replace the whole hvac system to fix it I have no heat or a/c and I seen there are recalls concerning this matter
- Exterior lighting
The third brake light stays lit even when key is off and gets extremely hot. rear brake lights come on when key is turned on making them indistinguishable from running lights. This happens even if brake pedal switch is removed!
- Power train
Driving home from the store the rear end locked up, sheared off my drive shaft. Caused a slight skid. There was a low hum when I let off the gas. I thought it was road noise. It got louder as I got closer to home. As I hit the brakes to turn into my neighborhood it was very loud. As soon as I…
Driving home from the store the rear end locked up, sheared off my drive shaft. Caused a slight skid. There was a low hum when I let off the gas. I thought it was road noise. It got louder as I got closer to home. As I hit the brakes to turn into my neighborhood it was very loud. As soon as I turned and hit the accelerator I heard a loud noise and started to skid into the curb. There as a loud banging as my drive shaft spun and hit everything under my truck.
- Power train · Suspension
Took the truck in for tire rotation and was told they couldn't do it due to the rear frame being severely rusted out I have noticed this is a very common problem with this year truck in the same area mine is rusted out
- Power train › Axle assembly
The contact owns a 2009 Ram 1500. The contact stated that while driving 30 MPH, the front passenger’s side axle fractured and detached, which caused the front passenger’s side tire to detach. Additionally, the failure caused brake damage, and the front passenger’s side door would not open due to…
The contact owns a 2009 Ram 1500. The contact stated that while driving 30 MPH, the front passenger’s side axle fractured and detached, which caused the front passenger’s side tire to detach. Additionally, the failure caused brake damage, and the front passenger’s side door would not open due to damage done to the fender. Prior to the failure, the front driver’s side axle also fractured and detached a year prior. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 200,000.
- Visibility/wiper
K-17 recall. Chris Nikel CDJRF at 2920 N. Aspen Ave. Broken Arrrow, OK 74012, 918-806-4197, diagnosed that an actuator door is not functioning properly within the HVAC system on 10-5-21. Service Advisor 856 Dwayne Appeldorn told me that he can not obtain recall approval for Chrysler to cover the…
K-17 recall. Chris Nikel CDJRF at 2920 N. Aspen Ave. Broken Arrrow, OK 74012, 918-806-4197, diagnosed that an actuator door is not functioning properly within the HVAC system on 10-5-21. Service Advisor 856 Dwayne Appeldorn told me that he can not obtain recall approval for Chrysler to cover the repair expense. On 10-6-21, I called the Chrysler Customer Service Center at 866-726-4636 and a Mercedes told me that Chrysler will not cover the expense of the repair. NHTSA has helped me with this same exact problem in the past by telling me that recalls are good for the life of the vehicle and original owner.
- Engine
The exhaust manifold cracked. This allows toxic pre-catalitic converter fumes to be released under the vehicle and potentially enter the vehicle. I have been informed that this is a common issue on This generation truck. It has not been inspected by manufturer, police, or insurance. And this has caused no warning lamps or signals before or after issue arose.
- Service brakes · Unknown or other
I Just bought this car, i get a notice from DMV 2-recalls have not been fixed on this truck I am not driving it until it is repaired, i need to drive it soon for I have a son on a ventilator i need to drive to the Dr only. I am getting the run around with dodge called 5-dealers to hear all different stories why this cannot be taken care of. if i bring it to the local repair shop dodge should pay i need my vehicle
- Unknown or other
The odometer on 4th generation dodge will not go over 621,369 miles. This is a none problem which they refuse to fix. This vehicle has a unlimited power train warranty. Dodge refuses to fix the problem.
- Power train · Service brakes · Steering
I was driving down road when I heard a clanking noise coming from back of truck. I was going about 26mph and I checked for warning lights and system info that shows Temps, but everything was showing normal. The noise got louder ,so I took foot off gas pedal, which then started getting a loud…
I was driving down road when I heard a clanking noise coming from back of truck. I was going about 26mph and I checked for warning lights and system info that shows Temps, but everything was showing normal. The noise got louder ,so I took foot off gas pedal, which then started getting a loud rubbing noise coming from wheels. Truck slowed down quickly. When I pressed gas pedal the clanking/grinding noise got louder. I was close to a 7-Eleven entry way,so I took foot off gas. I then heard a loud clanking (like metal dropped on pavement), so I turned to enter 7-Eleven area to get truck out of road . Truck turned into entrance and came to a dead stop. No of pedals were pushed, engine was in drive, and noise got louder. I turned off truck, cause of noise and dashboard had most lights on adif you were going to start engine. There were no red warnings or messages showing on dashboard. With engine off, I got out of truck and looked under my truck and the rear driveshaft was completely off sitting on road, and the rear transmission joint it connects to was dumping transmission fluid onto pavement. Fluid was bright green with nothing in it. The truck would not move, all 4 wheels were locked up. Me and several people tried pushing truck so the rear end was in roadway. Put truck would not move at all. If you turned key to put into neutral the clanking/grind noise would start again so shutdown engine. I called roadside assistance to come tow truck to dealership a few miles from where I was. Talking with others they said never seen something like this happen. Especially with the truck being '09, with only 58,505 miles. The dealership has a technician looking at it to see what parts it needs and to see what parts are discontinued. I told service rep. it was strange it came without a warning, she said it's a common problem, happens all the time. That's shocking, I had no control when driveshaft came off. I was turning, it jerked to a stop, messed up 3 ribs and hip.
- Wheels
I have had three separate mechanics diagnose my 2009 Dodge Pickup truck after reporting hearing a loud hum. All three mechanics diagnosed rear-wheel bearings failure. Also, the wheel bearing failure may have caused the rear differential to fail as well. To repair my vehicle will cost between…
I have had three separate mechanics diagnose my 2009 Dodge Pickup truck after reporting hearing a loud hum. All three mechanics diagnosed rear-wheel bearings failure. Also, the wheel bearing failure may have caused the rear differential to fail as well. To repair my vehicle will cost between $1500 and $4000. I have seen several reports online that this is a common problem and I would like to file a complaint the Dodge did not properly design the vehicle.
- Electrical system
Door locks do not work
- Suspension
TL* the contact owns a 2009 RAM 1500. While reversing out of a parking lot and turning to the right, the front driver's side hub detached from the wheel without warning. The vehicle was towed to an independent mechanic where it was diagnosed that the wheel hub assembly separated from the wheel and…
TL* the contact owns a 2009 RAM 1500. While reversing out of a parking lot and turning to the right, the front driver's side hub detached from the wheel without warning. The vehicle was towed to an independent mechanic where it was diagnosed that the wheel hub assembly separated from the wheel and needed to be replaced. The vehicle was repaired. Gerry wood chrysler dodge jeep RAM (525 jake alexander blvd s, salisbury, nc 28147, (704) 508-4660) was made aware of the failure and informed the contact that the vin was not included in a recall. The contact referenced nhtsa campaign number: 07v038000 (suspension). The manufacturer was not made aware of the failure. The failure mileage was approximately 106,000.
- Electrical system · Engine · Steering
The truck lost power and the steering locked up.it was in motion going around a turn and went off the road. This IS the second time the vehicle lost power the first was on the freeway and the dealer said there were no error codes.
- Structure › Body
Rusted frame, reported to fca 2/19/19 , presented to dealership 2/25/19, I was told they could not lift truck for safety reasons, there IS a hole rotted through the frame rail forward of rear tire. This could be an obvious safety issue. I have had the recall done for the gas tank strap, frame…
Rusted frame, reported to fca 2/19/19 , presented to dealership 2/25/19, I was told they could not lift truck for safety reasons, there IS a hole rotted through the frame rail forward of rear tire. This could be an obvious safety issue. I have had the recall done for the gas tank strap, frame rust, the truck IS in excellent shape, it has 74,800 miles, not a scratch and a lifetime power train warranty. It has been maintained. this frame was only used for a couple years, I would not be surprised if all rams of this vintage did not have the same problem or will shortly I spoke to fca on 3/14/19, I was told that I could take my truck to another dealership, they could prevent me from driving my truck home, and fca would offer no assistance. Presently a new frame IS not avail could take months to get, if it can be gotten. this IS an accident waiting to happen.
- Unknown or other
I own a 2009 RAM 1500 slt which I bought brand new that can no longer support its own weight. the frame IS so badly corroded it can not be lifted. the vehicle was brought into fair oaks chantilly motors (703-961-9900) for a recall and the service manager, tom archer called to inform me the frame…
I own a 2009 RAM 1500 slt which I bought brand new that can no longer support its own weight. the frame IS so badly corroded it can not be lifted. the vehicle was brought into fair oaks chantilly motors (703-961-9900) for a recall and the service manager, tom archer called to inform me the frame was so corroded they could not lift the vehicle to preform the maintenance. this truck has less than 58,000 miles on it, has never been in or near saltwater, was parked off street on a hard driveway, was meticulously maintained and was washed regularly at a carwash with an under carriage spray. I was assigned a case number under their "good will" program, because I have purchased 4 new chrysler products in the last 22 years. the case number IS 57483749. chrysler has agreed to pay for labor, but I must pay for the parts to include a new frame. the frame cost alone IS $2,000. this IS a material or design defect. a truck frame with less than 60,000 miles should not be so corroded it can not support its own weight. this vehicle could have cracked in half while driving causing death or serious injury. the truck will no longer pass inspection and IS not safe to drive. the consumer should not be responsible for correcting any of this problem. this IS safety issue I hope you can resolve, or are currently investigating.
- Electrical system
Tipm failure- total integrated power module failed abruptly causing the following symptoms. ABS- break- esp/bas and traction control indicator lights to light. The following systems no longer work- hvac- blower fan- windshield wipers- door locks and horn are inoperable. no replacement available…
Tipm failure- total integrated power module failed abruptly causing the following symptoms. ABS- break- esp/bas and traction control indicator lights to light. The following systems no longer work- hvac- blower fan- windshield wipers- door locks and horn are inoperable. no replacement available for a minimum of 35 days per dodge customer care line. this failure occurred while moving and gave no warning of trouble before hand.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Electrical overstress
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air…
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010205Plate - Planetary
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10229031Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10225951CONNECTOR Trailer Tow,WIRING Trailer Tow,CONNECTOR 7 Way,WIRING Rear Bumper If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
- 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
- 10223679Wheel Liner to Steel Bumper Slip Fit Design This bulletin involves informing technicians that the wheel liners tabs are to be tucked behind the flange of the bumper bracket. No fasteners are used to attach the liner and the bumper when vehicle is equipped with a steel front bumper.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10223525Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes P0407 ? EGR Sensor B Circuit Low, or P0408 ? EGR Sensor B Circuit High Set
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220994Part Description: Insulator in Lever Assembly - Valve Body - Trans Issue Description: The manual valve insulator, attaching rivet and an instruction sheet are now available as a kit. If the insulator requires replacement please order 68253099AA. Note: Insulator color is not relevant for service
- 10220868Transfer Case Gear Motor/Actuator Installation Guidelines.
- 10220837GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
- 10220687Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10220561Rattle Tapping Fluttering Noise From A Pillar Or Dash Driving At Highway Speeds
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10216423Advanced Field Action Communication ? N0802072013 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.
- 1021641868069384A$, R8069384A$, 68086182A$, R8027067A$, RL002012A$ - Gasket, Cylinder Head Cover Before replacing injectors for Diagnostic Trouble Codes P0201, P0202, P0203, P0204, P0205, and/or P0206, please make sure that the wiring loom and/or connector in the valve cover gasket is not the root cause to your concern. In addition, make sure that the wiring attaching nuts are torqued to their proper value.~
- 10216395Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10216349Advanced Field Action Communication ? M3411302012 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.
- 10215879Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10212290Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10191460Valve Body. These may cause over drive cycling.
- 10190615Transfer Case Gear Motor/Actuator Installation Guidelines.
- 10190584GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
- 10188765Rattle Tapping Fluttering Noise From A Pillar Or Dash Driving At Highway Speeds
- 10187058Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10175677Valve Body Pressure Testing Plug Inspection
- 10175619APPLIQUE, Storage Bin (Rambox) For concern of Rambox applique fading, do not replace the applique. This is due to wax or other chemical substance being used on a grain in molded color part. You can clean the applique using isopropyl alcohol. This is not a warrantable condition.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10166537RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
- 10162521Safety Recall V47 / NHTSA 19V-325 Backlite Glass Parts Ordering Information
- 10162520Vehicles Eligible For CSN U07 And V08, V11 or V16 Important Update To U07 Dealer Instructions
Every RAM 1500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.