2001 Toyota Sequoia
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sequoia › 2001
These records cover every 2001 Toyota Sequoia. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2001 Toyota Sequoia. Newest first.
Certain cardone master cylinders with part numbers 10-2925, 10-2987, 10-2987mza, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, and 11-3156, and with date codes lower than dca7078 sold as replacement equipment for use on the vehicles listed above. the seal on master cylinder can fail and leak brake fluid.
Risk and remedy
Risk
Loss of brake fluid can result in poor braking performance, possibly resulting in a vehicle crash.
Remedy
Cardone will notify owners and offer to repurchase any defective master cylinders. the recall began during april 2007. owners can contact cardone at 1-800-777-4780.
Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Ck motorsport will notify owners and replace the noncompliant lamps free of charge. the recall began on july 1, 2006. owners may contact ck motorsport at 1-909-610-7211.
On certain 4X2 vehicles equipped with an alloy wheel tire upgrade (options WM4, WM8, zl1-zl4, DH4, or DH5) installed by the processing centers in jacksonville, florida or commerce, georgia, a label identifying the spare tire as a temporary use spare tire was not installed. the upgrade includes 4 larger size tires with alloy wheels. the original spare…
Risk and remedy
Risk
Different operating characteristics can be experienced when the spare tire IS installed on the vehicle.
Remedy
Owners will be provided with a caution label and an insert for their owner's manual. owner notification began july 15, 2002. owners who do not receive the free remedy within a reasonable time should contact southeast toyota at 1-800-301-6859.
Owner complaints
531 complaints20 involved a crash16 injuries1 deaths
What owners report most
Latest complaints
- Structure › Body
There is a hole in the frame because of the rust.
- Unknown or other
Took my toyota in for repair at they deemed it not safe to drive
- Service brakes · Structure › Body
I own a 2001 Toyota Sequoia SR5, which I purchased new in Colorado and moved to Virginia in 2004. I received a Toyota Limited Service Campaign Program notice in 2013 about excessive corrosion on the frame. Alexandria Toyota inspected the vehicle and applied a Corrosion-Resistant Compound to the…
I own a 2001 Toyota Sequoia SR5, which I purchased new in Colorado and moved to Virginia in 2004. I received a Toyota Limited Service Campaign Program notice in 2013 about excessive corrosion on the frame. Alexandria Toyota inspected the vehicle and applied a Corrosion-Resistant Compound to the frame. They also replaced the spare tire carrier assembly due to rusting. Over the years, I've had mechanics mention the rust on the frame but Toyota never issued a recall on the 2001 Sequoia. In November 2024, the following dashboard lights remained on while driving: Vehicle Skid Control (VSC) OFF, VSC TRAC and Brake Lights. I took it to Steven’s Auto Clinic in Alexandria. They found low brake fluid levels were causing the brake system failure. The brake pipes are leaking due to heavy rust. In addition, rust was destroying the under carriage. The brake system and frame would require extensive maintenance. They warned me NOT to drive the car. They refilled the brake fluid to allow me to take the car home. Reading the Complaints under Structure on the NHTSA website, dozens of customers over the years mention serious rusting on the frame of their 2001 Sequoias. I believe Toyota had a recall to replace the frame on the Tundra but never included the 2001 Sequoia even though it was built on the Tundra frame. I now have a vehicle I can’t drive, due to safety concerns, and I can’t sell, except for parts. The Sequoia should have been included in the Tundra recall. Toyota needs to be held accountable. I can provide any paperwork for my 2001 Sequoia including the Limited Service Campaign Program notice and the repair order from Stephen’s Auto Clinic if necessary. I can also provide the vehicle for inspection.
- Engine
The contact owns a 2001 Toyota Sequoia. The contact stated while driving at various speeds, he became aware of a cranking sound and the vehicle suddenly started jerking and shaking. An unknown warning light was illuminated. The contact stated that the vehicle was repaired, and the front wheel speed…
The contact owns a 2001 Toyota Sequoia. The contact stated while driving at various speeds, he became aware of a cranking sound and the vehicle suddenly started jerking and shaking. An unknown warning light was illuminated. The contact stated that the vehicle was repaired, and the front wheel speed sensor was replaced; however, the failure persisted. The contact stated the failure had gotten worse over time. The contact also stated that while searching online, he became aware that the failure was a common failure with similar vehicles. The vehicle was not diagnosed or repaired by an independent mechanic or local dealer. The manufacturer was not made aware of the failure. The failure mileage was 181,000.
- Structure › Frame and members
The contact owns a 2001 Toyota Sequoia. The contact stated that the vehicle was at the dealer for a diagnostic test; however, the dealer declined to perform the diagnostic test, stating that the sub frame was unstable, and an unknown recall campaign had expired. The manufacturer was made aware of…
The contact owns a 2001 Toyota Sequoia. The contact stated that the vehicle was at the dealer for a diagnostic test; however, the dealer declined to perform the diagnostic test, stating that the sub frame was unstable, and an unknown recall campaign had expired. The manufacturer was made aware of the failure. The contact stated the dealer informed him there was a recall for the sub frame, however, the recall had expired. The failure mileage was unknown.
- Electrical system · Service brakes · Unknown or other
No accident. Just frame issues. If you can. Can I please get a voucher for frame repair. I really like this SUV. Thank you!
- Power train · Structure › Body
Rear axle is rusted to the point where differential fluid is leaking out of the body. There is extreme rust in general which has led to the failure of multiple components such as the oil pressure sending unit. Check engine light is on. This hasn't been verified by a shop or agency, only by me. These issues were discovered shortly after purchase this year.
- Service brakes · Steering · Vehicle speed control
While driving my 2001 Sequoia SR5 with only 74,750 miles on freeways at speeds between 55 and 65 mph, the SUV's braking system activates unexpectedly and without cause. The VSC check engine lighting and warning sound illuminate. My SUV veered to the right, the steering wheel vibrated, and it went…
While driving my 2001 Sequoia SR5 with only 74,750 miles on freeways at speeds between 55 and 65 mph, the SUV's braking system activates unexpectedly and without cause. The VSC check engine lighting and warning sound illuminate. My SUV veered to the right, the steering wheel vibrated, and it went into a skid when the brakes were abruptly engaged, causing it to skid. My SUV abruptly decelerated as if it had lost power. This situation was hazardous for other vehicles who could not tell if they were applying the brakes due to the absence of visible brake lights to prevent a collision. Fortunately, I responded defensively and avoided collisions with other vehicles and roadside obstacles. This issue is a safety concern; if it occurs at the wrong moment, a tragedy can be avoided. I've seen more than a hundred complaints from other proprietors and a completed NHTSA investigation. Sequoia models from 2001 and subsequent years were recalled for the same issue. Before a life is lost, Toyota must address this issue in all model years.
- Unknown or other
No incident. Frame is getting a little rusted. Can you please send me a voucher for a recall.
- Suspension › Front › Control arm › Lower ball joint
Complete failure and separation of the lower ball joint. Caused the wheel to fall off, damaging the front fender and jamming the front door making the door stuck closed. Fortunate we did not crash into anything and kill anyone. A very close call.
- Suspension › Front › Wheel bearing
The contact owns a 2001 Toyota Sequoia. The contact stated while driving 15 MPH, the front driver’s side wheel bearing fracture causing the tire to detach from the vehicle. The vehicle was towed to the dealer and the front wheel bearing was repaired; however, the failure reoccurred. The manufacturer was not contacted. The failure mileage was 200,000.
- Tires
The tread came off on the freeway. The actual tire is still in tact. The tread flew off and ripped our bumper and quarter panel off. The back latch and window to open the vehicle to retrieve the spare no longer work. We are now concerned with the other tires quality and tread.
- Service brakes · Steering · Wheels
I was coming off the highway goi g down the off ramp at a rate of speed in line with the speed limit, and the vsc/abs/brake lights all came on. The truck started making a grinding noise and was difficult to control. I pulled over and checked underneath. Everything was fine and there was no…
I was coming off the highway goi g down the off ramp at a rate of speed in line with the speed limit, and the vsc/abs/brake lights all came on. The truck started making a grinding noise and was difficult to control. I pulled over and checked underneath. Everything was fine and there was no sign of an issue. I turned the truck off and on, and all the lights cleared; however, the lights turn on again when the vehicle is cold. Once it warms up, and you turn the car on and off, the clear. No codes on the scanner. Forums say this happens regularly with this make, model and year, but no one is sure what it is. Everything from emissions, to the brake sensor to the yaw rate sensor.
- Service brakes
INAPPROPRIATE stability braking, A noticable swerve to the right accompanied by a grinding noise ant the ASC and Traction control warning lights.
- Forward collision avoidance › Automatic emergency braking · Unknown or other
Vsc tracking lights and check engine
- Suspension · Wheels
I have changed tires 2 times but I did not know that my sequoia has a recalled from the suspension and it seems to me that all the suspension is out eventhough that I replaced the struts upper and lower balljoint side arm rod tide even the racquet pinion may be out please help with the nesessary…
I have changed tires 2 times but I did not know that my sequoia has a recalled from the suspension and it seems to me that all the suspension is out eventhough that I replaced the struts upper and lower balljoint side arm rod tide even the racquet pinion may be out please help with the nesessary repair driving it like that I’m putting my family at having a accident cause the tire do not wear properly sincerely Joseluis saldana
- Structure › Body
Frame Replacement needed: I took my 2001 Toyota Sequoia (45,515 miles; always garaged) in for an Emissions & Safety Inspection. I was notified the excessive rust on the frame has cause damage to the lines for the brakes/bubbling on the lines, fuel line, power steering fluid lines and, eventually…
Frame Replacement needed: I took my 2001 Toyota Sequoia (45,515 miles; always garaged) in for an Emissions & Safety Inspection. I was notified the excessive rust on the frame has cause damage to the lines for the brakes/bubbling on the lines, fuel line, power steering fluid lines and, eventually, other undercar items may soon fail. It is recommended that due to the excessive rusting/premature frame rotting, the SUV should be decommissioned and off the road. Toyota dealership actually suggested that it might be necessary for me to sign a waiver in order to take the vehicle out of the dealership. The waiver was to hold Toyota harmless should something result as a result of the defect. I was shocked at the request/I declined. Stated the severe rusting is from the front to the rear of the frame. Research shows the Toyota Corporation is fully aware of the excessive rusting on the Toyota Sequoia SUVs however no remedy has been in place to resolve the issue for current owners. I am advised to replace the fuel lines (approximately $1700 for parts and labor), however, upon replacement the excessive rusting to the frame may damage the other lines in the vehicle and the frame will need to be replaced as well (about $10,000). The 2nd technician stated he has done work on 20+ year old SUVs a lot, none with anywhere near this type of premature rusted frame. Stated he couldn't believe how bad it is. Said it flakes apart when you touch it anywhere. He stressed that I should not have my octogenarian mom, and 1st grader in the vehicle. This is our family vehicle. The 2001 Sequoia SUV was built on a tundra frame which had a structural recall (NHTSA action number: pe09049) for frames built in 2000 and 2001. The Sequoia was left out of this recall; a 2012 Spray Option was offered for the frame (I was told by "Israel" today / Brand Ambassador Department). I never received the notification. No dupport from Toyota. The frame, fuel lines need replacement. Pls help!
- Service brakes · Steering
ABS kicks in while driving. It happens at a moderate speeds. IT IS A SAFETY HAZARD since I am in the car with my kids and it causes the car to unexpectedly brake. The VSC light come on and blinks, there is a loud grinding sound. This was reproduced by mechanic. SAFETY HAZARD
- Structure › Frame and members › Underbody shields
The contact owns a 2001 Toyota Sequoia. The contact stated while approaching the vehicle, she noticed rust and corrosion on the undercarriage of the entire vehicle. The contact stated that she had received a manufacturer recall notification and the vehicle was taken to the local dealer who sprayed…
The contact owns a 2001 Toyota Sequoia. The contact stated while approaching the vehicle, she noticed rust and corrosion on the undercarriage of the entire vehicle. The contact stated that she had received a manufacturer recall notification and the vehicle was taken to the local dealer who sprayed the undercarriage with a rust coating inhibitor to prevent the undercarriage from rusting however, the failure occurred. The contact took the vehicle to another local dealer Millennium Toyota (257 N. Franklin St, Hempstead, NY 11550, (516) 874-2581) who inspected the vehicle and stated that the vehicle was unsafe to drive. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 100,000.
- Suspension · Unknown or other
Recently I took the vehicle in to investigate a clunking noise. I was informed by the shop that the frame had completely rusted through, causing the rear stabilizer arm to become detached. I also had a front stabilizer link fail twice in a year, presumably from the frame excessively flexing. Upon…
Recently I took the vehicle in to investigate a clunking noise. I was informed by the shop that the frame had completely rusted through, causing the rear stabilizer arm to become detached. I also had a front stabilizer link fail twice in a year, presumably from the frame excessively flexing. Upon further investigation, I came to learn that Toyota is quite aware of this very issue, they’ve issued recalls where insufficient measures may have been taken to temporarily stop the rusting, and that many many other Sequoia owners have the same exact problems that I’m having, and Toyota refuses to take responsibility for this premature failure and provide some sort of relief. Given the frequency and number of complaints, I’m kind of shocked that NHTSA hasn’t banned these vehicles from the roadways. Seems like a serious accident waiting to happen. It’s not like the facts are in question in this case. There must be hundreds or thousands of examples. If you do a web search for “2001-2004 toyota sequoia rust corrosion on frame” you’ll find a bunch of examples, as well as accounts of Toyota’s numerous refusals to stand behind their mistakes. I still have the vehicle, and would gladly help you with any investigation. I did have part of the frame welded just so I could limp it back home to WI. I towed it on a trailer. It runs great, and is in very good condition, which is why this is all such a shame.
- Service brakes · Steering
Occasionally, while driving the vehicle the "vsc trac" automatically comes on causing the vehicle to brake and the steering is difficult to control.
- Service brakes
The vehicle engages braking in one front wheel for no apparent reason. The traction and vsc lights come on. This can occur at low speed or at high speed. It can make the vehicle unstable. The vehicle is available for inspection. I am taking the vehicle to the dealer for inspection. There was no accident.
- Structure › Body
My truck would be perfect aside from the major corrosion located on the entire frame. I'm on borrowed time with my vehicle. Toyota should replace the frame before the bottom drops out. The cause of this would probably be cheap parts from the factory.
- Service brakes
TL* the contact owns a 2001 toyota sequoia. The contact stated while driving 50 mph, the brakes applied forcefully and independently. The contact also stated that the vehicle began to pull to the right. The contact stated that the traction control warning light and several other unknown warning…
TL* the contact owns a 2001 toyota sequoia. The contact stated while driving 50 mph, the brakes applied forcefully and independently. The contact also stated that the vehicle began to pull to the right. The contact stated that the traction control warning light and several other unknown warning lights were illuminated. The contact stated he continued to experience the failure while attempting to park on the side of the road. The vehicle was not drivable. The vehicle was not diagnosed nor repaired. A dealer was not contacted. The manufacturer had been informed of failure. The failure mileage was approximately 240,000.
- Steering · Structure › Body · Suspension
Very bad resty frame and keep fixing shocks because the frame IS bad on my toyota sequoia 2001 cause problem with brakes and shocks
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Yaw rate sensor malfunction
On June 14, 2016, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE16-006 to investigate 135 complaints alleging incidents of yaw rate sensor malfunctions resulting in unexpected Vehicle Stability Control (VSC) activations and steering pull while driving in model year (MY) 2001-2002 Toyota…
On June 14, 2016, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE16-006 to investigate 135 complaints alleging incidents of yaw rate sensor malfunctions resulting in unexpected Vehicle Stability Control (VSC) activations and steering pull while driving in model year (MY) 2001-2002 Toyota Sequoia vehicles.ODI identified a total of 958 incidents in complaints provided by Toyota or submitted to ODI by consumers.ODI conducted the following work to assess the alleged defect in the subject vehicles: 1) evaluated the design of the subject yaw rate sensor; 2) initiated vehicle testing and instrumentation; 3) performed failure analysis on subject components collected from the field; 4) analyzed field data for evidence of system faults; and 5) reviewed the performance of the subject system in fault simulations testing conducted by Toyota.ODI review indicated that an overwhelming majority of incidents are related to flashing VSC slip indicators on the instrument panel accompanied by warning buzzers and grinding noise or vibration caused by pulsed brake application to one of the front wheels.Yaw rate sensor malfunctions resulting in VSC brake applications is accompanied by a brief duration of longitudinal deceleration with minimal changes in vehicle speed and will not result in abrupt lane change or loss of vehicle control due to steering controllability.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety related defect does not exist.For additional information, see the closing resume appendix and the investigation file for PE16-006.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10171405TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.
- 10164330TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
- 10152205TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10150418TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10149217TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10145776Update on Technician Certification Requirements.
- 10145749Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10145748Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10143953TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
- 10143927TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.
Every Toyota Sequoia model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.