2006 Toyota Sequoia
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sequoia › 2006
These records cover every 2006 Toyota Sequoia. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2006 Toyota Sequoia. Newest first.
Tenneco Automotive (DRiV) is recalling certain aftermarket ball joints for 2004-2007 Toyota Sequoia and 2004-2006 Toyota Tundra vehicles, MOOG part number K80521, K80522, NAPA part number NCP2601633, NCP2601634, ACDelco part number 45D2344, and 45D2345. The ball joint housing may have inadequate hardness, causing premature failure.
Risk and remedy
Risk
A ball joint failure may cause a loss of control, increasing the risk of a crash.
Remedy
DRiV will work with distributors to return unsold parts. Dealers will inspect and replace the ball joint as necessary, free of charge. Owner notification letters were mailed on March 17, 2022. Owners may contact DRiV customer service at 1-877-489-6659 or at RECALL.SUPPORT@DRIV.COM.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2003-2006 Toyota Land Cruiser and Lexus LX470, 2005-2006 Toyota Tundra and Sequoia, 2004-2006 Toyota 4Runner and Lexus GX470 vehicles equipped with side curtain-shield-air bags. The affected vehicles have an air bag control module that may be improperly programmed, causing…
Risk and remedy
Risk
If the side curtain-shield-air bags deploy unexpectedly, it can increase the risk of occupant injury.
Remedy
Toyota will notify owners, and dealers will replace the air bag control module with one that has improved programming, free of charge. The recall began on December 1, 2016. Owners may contact Toyota customer service at 1-888-271-9371. Toyota's number for this recall is G0C and GLB.
Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015 that they are recalling certain model year 2004 Sequoia vehicles manufactured August 18, 2003, to August 19, 2004, and 2003-2004 Tundra vehicles manufactured March 18, 2003, to August 25, 2004. On June 16, 2015, Toyota expanded the recall to include an additional…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
2003-2004 Corolla and Corolla Matrix vehicles that are recalled under both 15V-043 and 15V-285 are under a Do Not Drive advisory. Owners of these vehicles are advised not to drive their vehicles until the recall remedy has been completed. Toyota will notify their owners. Pontiac Vibe owners will be notified by GM. Dealers will replace the front passenger air bag. The recall began on July 13, 2015. Toyota owners may contact Toyota customer service at 1-800-331-4331. Pontiac owners may call 1-800-762-2737. NOTE: This recall supersedes recall 14V-312 in its entirety.
Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015, that they are recalling 2005-2007 Lexus SC, Toyota Corolla, Corolla Matrix, Sequoia, and Pontiac Vibe, and 2005-2006 Toyota Tundra vehicles that were originally sold, or ever registered, in Florida, along the Gulf Coast, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
2003-2004 Corolla and Corolla Matrix vehicles that are recalled under both 15V-043 and 15V-286 are under a Do Not Drive advisory. Owners of these vehicles are advised not to drive their vehicles until the recall remedy has been completed. Toyota will notify their owners. Pontiac Vibe owners will be notified by GM. Dealers will replace the passenger side front air bag, free of charge. Owners may contact Toyota customer service at 1-800-331-4331. Toyota began the recall on July 13, 2015. Pontiac Vibe owners may contact GM at 1-800-762-2737. GM began the recall on June 29, 2015. NOTE: This recacll supersedes recall 14V-655 in its entirety. For vehicles located in the U.S. states not listed above, please see Toyota recall 15V-285 which covers all other U.S. states.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Certain cardone master cylinders with part numbers 10-2925, 10-2987, 10-2987mza, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, and 11-3156, and with date codes lower than dca7078 sold as replacement equipment for use on the vehicles listed above. the seal on master cylinder can fail and leak brake fluid.
Risk and remedy
Risk
Loss of brake fluid can result in poor braking performance, possibly resulting in a vehicle crash.
Remedy
Cardone will notify owners and offer to repurchase any defective master cylinders. the recall began during april 2007. owners can contact cardone at 1-800-777-4780.
On certain trucks and MINI vans, due to possible improper finishing of the front suspension lower ball joint, some ball joints may experience an incidental deterioration of the internal lubrication. this may cause the ball joint to wear and loosen prematurely, which could result in increased steering effort, reduced vehicle self-centering, and noise in the…
Risk and remedy
Risk
In extreme cases, if the vehicle IS continuously operated in this condition, the lower ball joint may separate from the knuckle and could cause a loss of vehicle control.
Remedy
Dealers will replace the front suspension lower ball joints. the recall began on february 28, 2007. owners may contact toyota at 1-800-331-4331.
Owner complaints
202 complaints7 involved a crash4 injuries
What owners report most
Latest complaints
- Structure › Body · Suspension · Unknown or other
This Toyota has several large rust holes directly on the frame. i hit a pot hole and more structure damage was revealed on the frame from rust. The truck drives rough now. The vehicle only has 150,000 miles. The rust holes are so severe that they're directly under my suspension. I feel very unsafe…
This Toyota has several large rust holes directly on the frame. i hit a pot hole and more structure damage was revealed on the frame from rust. The truck drives rough now. The vehicle only has 150,000 miles. The rust holes are so severe that they're directly under my suspension. I feel very unsafe driving this vehicle. Their was once a recall for the frame. It doesn't seem that it was satisfied. I'm very worried about this issue. Toyota should have to replace frame or make it safe to drive.
- Structure › Body
Back in 2018 toyota did the undercoat to my 2006 Toyota sequoia frame to prevent rust. Now my frame is completely rotted out to the point i can’t drive my vehicle.
- Structure › Body
Frame of this vehicle has lot of rust damage, is it still under manufacture recall? How can I ensure safety of my vehicle along with rusty frame? I’ll be glad to receive more information how to contact manufacturer in order to get this resolved. I drove this vehicle on Nov 19, 2023 last time just hear some knocking sounds while driving
- Structure › Body
Frame rusted so badly the the brackets attached to it are coming off
- Air bags
2006 toyota sequoia. Consumer stated that the airbag did not deploy during auto accident. the consumer stated the manufacturer denied any responsibility, stating that the vehicle operated as designed. The manufacturer advised the vehicle's impact did not require the airbags to deploy. The consumer…
2006 toyota sequoia. Consumer stated that the airbag did not deploy during auto accident. the consumer stated the manufacturer denied any responsibility, stating that the vehicle operated as designed. The manufacturer advised the vehicle's impact did not require the airbags to deploy. The consumer was unsatisfied with this response. The vehicle was totaled. The consumer requested a newly repaired vehicle and to be compensated for future accidents that may affect the driver.
- Unknown or other
My vehicle was in dealer shop for various maintenance 3 times (Nov 202 - May 2021 - Jan 2022). Frame rear passenger side rusting to the point I was told not to drive my vehicle on bad roads. Toyota dealer said to replace the frame thru them would cost me $14,000. I cried all the way home because…
My vehicle was in dealer shop for various maintenance 3 times (Nov 202 - May 2021 - Jan 2022). Frame rear passenger side rusting to the point I was told not to drive my vehicle on bad roads. Toyota dealer said to replace the frame thru them would cost me $14,000. I cried all the way home because I take exceptional care since I purchased her 2006 new. She is a Cream Puff. This should have been identified sooner. I have not driven her since Jan 3, 2022 because not only me+ (husband & dogs), but also my fellow motorists are at risk. Both my husband & an employee of the dealer shop asked Toyota directly in attempt to get them to replace frame at their expense. Toyota said No.
- Structure › Body
The driver side, rear, trailing arm broke away from the vehicles frame due to “frame rot” while driving. The vehicle became extremely dangerous to drive. Toyota has since declined to help. They said they notified us via mail of a customer service campaign addressing the premature rust issue, but we…
The driver side, rear, trailing arm broke away from the vehicles frame due to “frame rot” while driving. The vehicle became extremely dangerous to drive. Toyota has since declined to help. They said they notified us via mail of a customer service campaign addressing the premature rust issue, but we never learned of the program and lawsuit until after the frame broke and I almost crashed. Later I saw the broken arm/frame under the vehicle. This frame failure can potentially be a catastrophic and deadly event. I opened an insurance claim and it was denied and I was referred back to Toyota. Our vehicle has been factory maintained it’s entire life. No service advisors ever mentioned a possible problem to my family and I. I recently spoke to the Toyota service manager at Parker Toyota in Couer d Alene Idaho and his master technicians have seen the same failure that occurred on our vehicle. This is extremely dangerous.
- Suspension
The contact owns a 2006 Toyota Sequoia. The contact stated while driving 65 mph, the vehicle experienced the death wobble. The contact stated that the VSC OFF, and the VSC traction and brake warning lights were illuminated. The contact was able to park on the side of the road before deciding to…
The contact owns a 2006 Toyota Sequoia. The contact stated while driving 65 mph, the vehicle experienced the death wobble. The contact stated that the VSC OFF, and the VSC traction and brake warning lights were illuminated. The contact was able to park on the side of the road before deciding to continue to drive. The contact stated while driving to his residence, he heard an abnormal noise. The contact stated while inspecting the vehicle, the rear driver suspension link was detached from the vehicle. The vehicle was not diagnosed or repaired. A dealer was not contacted. The manufacturer had not been informed of the failure. The failure mileage was approximately 298,000.
- Power train · Steering · Suspension
My front end sounds weird and when I turn my trac lights come on and it tries to turn off but never does I was told my fuel pump was bad I paid 650 for it to be fixed was the issue I believe it is a recall on similar vehicles
- Structure › Body
I was on the freeway driving and out of nowhere the body started swaying and bobbing with no control. Was informed by the tow truck driver that i could have rolled the vehicle easily and the consequences would have been serious. The frame is so rusted out that the tie rod and sway bar assembly are…
I was on the freeway driving and out of nowhere the body started swaying and bobbing with no control. Was informed by the tow truck driver that i could have rolled the vehicle easily and the consequences would have been serious. The frame is so rusted out that the tie rod and sway bar assembly are completely detached from the frame and hanging loose. Upon further inspection at the auto repair garage there are rusting issues throughout the frame. The frame needs complete replacement.
- Unknown or other
Bought the vehicle not knowing it has a rotting frame
- Structure › Body
Frame rusted out and parts dropping off frame with no early warning. Toyota completed corrosion resistant compound 2 years ago following inspection per limited service campaign H0F, saying issue resolved to extent of warranty with known rust issue for this year and model. Now another independent…
Frame rusted out and parts dropping off frame with no early warning. Toyota completed corrosion resistant compound 2 years ago following inspection per limited service campaign H0F, saying issue resolved to extent of warranty with known rust issue for this year and model. Now another independent garage saying we never should have been driving, much less hauling 5000 lb. trailer. Only warning was odd sound from under carriage.
- Structure › Body
The frame IS very rusted
- Electrical system › Software · Unknown or other
I have purchased the vehicle a year ago. I happen to look at the carfax today and realize the carfax has more mileage then what IS on the odometer. *tr
- Vehicle speed control
TL* the contact owns a 2006 toyota sequoia. The contact stated that while driving at various speeds, while depressing the brake pedal, the vehicle accelerated independently without warning. The failure recurred twice. The vehicle was taken to an independent mechanic and was diagnosed that the…
TL* the contact owns a 2006 toyota sequoia. The contact stated that while driving at various speeds, while depressing the brake pedal, the vehicle accelerated independently without warning. The failure recurred twice. The vehicle was taken to an independent mechanic and was diagnosed that the throttle body needed to be cleaned. The vehicle was not repaired. The vehicle was not taken to a dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 134,000. Th vin was invalid.
- Electronic stability control (esc) · Service brakes · Unknown or other
I almost kill myself, the track off goes when I was driving and my car slide to the right after that all lights on the car went on and the code reader do not work says I can't read the codes no codes on the computer
- Electronic stability control (esc)
Traction control intermittently kicks in when taking off from a stop. Pavement IS level and dry at the time. Loses acceleration for a second or two. It has happened several times since 01/03/2020. Problem seems to be increasing.
- Suspension
Pulled out of driveway and drove 30 feet towards a stop sign going 15 mph and ball joint broke and car fell to driver side.
- Air bags
TL* the consumer owns a 2006 toyota sequoia. While driving 15 mph, the consumer slid on black ice, lost control of the vehicle, and crashed into a metal barrier dividing the road. There were no warning indicators illuminated. The air bags did not deploy. The consumer sustained neck and left arm…
TL* the consumer owns a 2006 toyota sequoia. While driving 15 mph, the consumer slid on black ice, lost control of the vehicle, and crashed into a metal barrier dividing the road. There were no warning indicators illuminated. The air bags did not deploy. The consumer sustained neck and left arm injuries that required medical attention. A police report was filed. The vehicle was towed to the consumer's residence. The vehicle was not diagnosed or repaired. The dealer and manufacturer were not notified. The failure mileage was 250,000. *Ln police report case number: xxxxxxx 'parts of this document have been redacted to protect personally identifiable information pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6).' *jb *as
- Suspension
TL* the contact owned a 2006 toyota sequoia. While driving 5 mph and making a left turn, the driver's side ball joint failed without warning. The contact took the vehicle to an independent mechanic where the ball joint was replaced. A year later, while the contact's wife was driving 70 mph, the…
TL* the contact owned a 2006 toyota sequoia. While driving 5 mph and making a left turn, the driver's side ball joint failed without warning. The contact took the vehicle to an independent mechanic where the ball joint was replaced. A year later, while the contact's wife was driving 70 mph, the passenger side ball joint failed without warning. The driver lost control of the vehicle and crashed into a median. There were no injuries and police report number: p190541059 was filed. The vehicle was totaled and towed to a tow yard. The cause of the failure was not determined. There were no recalls on the vehicle. The manufacturer and dealer were not notified of the failure. The failure mileage was 230,000. The vin was unknown.
- Air bags · Structure › Body
TL* the contact owns a 2006 toyota sequoia. The contact received a settlement postcard for the frame along with unknown recall notices regarding the air bags. The contact took the vehicle to butler toyota (9419 aronson dr, indianapolis, in 46240, (317) 848-4210) several times to have the frame…
TL* the contact owns a 2006 toyota sequoia. The contact received a settlement postcard for the frame along with unknown recall notices regarding the air bags. The contact took the vehicle to butler toyota (9419 aronson dr, indianapolis, in 46240, (317) 848-4210) several times to have the frame repaired; however, the air bags were repaired instead. This happened several times until the dealer stated that the settlement letter had expired. The contact stated that the frame was rusted from the inside out and was deteriorating rapidly. The dealer quoted a repair cost of $2,000 for an air suspension air bag that was not included in the recall. The cost to repair the frame was $3,000. The dealer did not include on the paperwork that the frame was the main reason the contact brought in the vehicle. The manufacturer stated that if the dealer had included the frame on the repair order, they would have taken care of the frame. The failure mileage was 230,000.
- Service brakes · Structure › Body · Suspension
We need help in getting toyota motors, inc. To honor the warranty program covering premature excessive rust corrosion of certain toyota model frames. in mid-october 2018 we received notification from toyota motors, inc., of the following: 'warranty enhancement notification ' ZH8 and limited…
We need help in getting toyota motors, inc. To honor the warranty program covering premature excessive rust corrosion of certain toyota model frames. in mid-october 2018 we received notification from toyota motors, inc., of the following: 'warranty enhancement notification ' ZH8 and limited service campaign ' hof.' the ZH8 and hof were instituted as a result of a determination that the frames on certain toyota vehicles are prone to 'excessive, premature rust corrosion because the frames were not properly prepared and treated against rust corrosion when they were manufactured.' excessive rust corrosion on my SUV 'compromises the vehicles' safety, stability, and crash-worthiness because important suspension components, engine mounts, transmission mounts, and body mounts anchor to the vehicles' frames'. by driving my high end SUV, I will be putting my family's safety at risk. On 10/25/2018: we took our SUV to jim coleman toyota in bethesda, md for frame inspection. The attached work order shows: 'inspected and found no perforation. Eligible for crc spray ' customer will return at a later date for frame crc application.' it was during this time I was told that jim coleman only had one person performing this work. And that we had two years from october 2018 to have the work performed by toyota at no charge. on monday march 10, 2019, we left our SUV with the toyota dealer so that the hof work could be performed. we received a call from the dealer at 5:05pm on friday 03/15/2019 informing us that (a) our SUV had not been repaired since the frame needed to be replaced (b) that there are large holes in the frame and (c) no work would be performed since the hof had ended in january 2019. we paid over $60,000.00 for our toyota SUV not many years ago. we literally received a different answer regarding the crc and hof each time we called toyota customer relations
- Structure › Body
My vehicle was in for engine and transmission repairs and being worked on for 3 months. I was unable to get it to toyota before the january 31 deadline for the frame program. I called and was told because it was being worked on, it would be honored anyways. Called to schedule to bring it in and…
My vehicle was in for engine and transmission repairs and being worked on for 3 months. I was unable to get it to toyota before the january 31 deadline for the frame program. I called and was told because it was being worked on, it would be honored anyways. Called to schedule to bring it in and they said, sorry, that expired, so you have to get approval from toyota but we can still coat it in anti corrosion til the end of may. I called toyota and spoke to multiple people who all said, its expired and we can't help you. So now I have a vehicle with a proven unsafe frame and no solution.
- Structure › Body
I have replaced the latch on my lift gate 3 times now. The latch keeps breaking. This IS ridiculous. I don't see a recall for it but I think there should be a recall for it. I can't access my spare tire if I have a flat or something. This needs to be addressed asap.
- Electronic stability control (esc)
When turning corner in motion the traction control light indicator comes on and the vehicle loses acceleration for 2 - 3 seconds, when light goes off acceleration will resume. Very dangerous when you are in traffic. Does not happen all the time.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Lower ball joint failure
In a letter dated january 18, 2007, toyota notified nhtsa of a safety defect in model year (my) 2004 through 2006 toyota tundra and my 2004 through 2007 toyota sequoia vehicles produced between september 15, 2003 and november 17, 2006 (nhtsa recall no. 07V-013). According to toyota, ?in the front suspension lower ball…
In a letter dated january 18, 2007, toyota notified nhtsa of a safety defect in model year (my) 2004 through 2006 toyota tundra and my 2004 through 2007 toyota sequoia vehicles produced between september 15, 2003 and november 17, 2006 (nhtsa recall no. 07V-013). According to toyota, ?in the front suspension lower ball joint on the subject vehicles, due to possible improper finishing of the ball joint, such as the aspect of the ball stud surface, some ball joints may experience an incidental deterioration of the internal lubrication. This may cause the ball joint to wear and loosen prematurely, which could result in increased steering effort, reduced vehicle self-centering, and noise in the front suspension. In extreme cases, if the vehicle IS continuously operated in this condition, the lower ball joint may separate from the knuckle and could cause loss of vehicle control.?toyota will instruct owners to return their vehicles to any toyota dealer for replacement of the front suspension lower ball joints. This engineering analysis has been closed, as toyota IS recalling the affected vehicles.odi will monitor the effectiveness of the remedy and take further action if warranted.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251076FAQ: Customer Frequently Asked Questions
- 10251075DP: The subject vehicles are equipped with a front passenger airbag. A part inside the airbag could explode, shooting sharp metal fragments at vehicle occupants. This could cause serious INJURY or DEATH. ? Added Dealer Procedures for Do No Drive Advisory ? Updated BEC contact information ? Revised Warranty Claim Filing Instructions to streamline customer convenience items during repair ? Added creatives materials from Vendor Partners i.e, sample letters and sample tags ? Removed several obsolete sections
- 10251074FAQ: Customer Frequently Asked Questions
- 10251073DP: The subject vehicles are equipped with a front passenger airbag. A part inside the airbag could explode, shooting sharp metal fragments at vehicle occupants. This could cause serious INJURY or DEATH. ? Added Dealer Procedures for Do No Drive Advisory ? Updated BEC contact information ? Revised Warranty Claim Filing Instructions to streamline customer convenience items during repair ? Added creative materials from Vendor Partners i.e, sample letters and sample tags ? Removed several obsolete sections
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10217806CSP: Takata CSP Coverage Job Aid - published 7.28.2022
- 10217804CSP: On July 30, 2018, a settlement of claims for Economic Loss related to Takata airbag inflators was approved for full implementation. The settlement includes Toyota?s agreement to provide a Customer Support Program (?CSP?) for 2002-2019 model year (MY) vehicles originally equipped with certain Takata airbag inflators or repaired under a recall with Takata airbag inflators to provide coverage for repairs of the airbag inflator contained in the airbag module. This CSP letter is to help clarify how to administer this coverage in accordance with the settlement. This is NOT a recall or a campaign, but is provided to reassure owners that Toyota stands behind the reliability of our vehicles.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197494Technician Certification Requirements.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
Every Toyota Sequoia model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.