2008 Toyota Sequoia
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sequoia › 2008
These records cover every 2008 Toyota Sequoia. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2008 Toyota Sequoia. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk and remedy
Risk
An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the…
Risk and remedy
Risk
If the switch overheats, it may melt, possibly resulting in a fire.
Remedy
Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.
Toyota IS recalling certain model year 2008 through 2011 FJ cruiser, land cruiser, tacoma, sequoia and tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring system (TPMS)." when factory-installed wheels and tires were replaced with toyota authorized accessory wheels and LT…
Risk and remedy
Risk
Failure to warn of tire deflations IS a non-compliance with fmvss 138 and could lead to tire failure increasing the risk of a crash.
Remedy
For the land cruiser, sequoia, tacoma and tundra vehicles, the dealer will re-calibrate the tire pressure monitoring system on affected vehicles and install an updated tire and loading information label at no charge. for the FJ cruiser vehicles, the TPMS cannot be reset so the electronic control unit (ecu) for the TPMS will be replaced. toyota IS currently developing the remedy ecu. if an owner IS not certain whether his or her vehicle IS equipped with these accessories, please contact any toyota dealer for an inspection at no charge. the safety recall began on march 31, 2011. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, RAV4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the…
Risk and remedy
Risk
The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
Remedy
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. gm will notify owners for the pontiac vibe please see 10v-018. this service will be performed free of charge. the safety recall IS expected to begin on february 5, 2010 and will be completed on march 15, 2010. owners may contact toyota at 1-800-331-4331.
Owner complaints
67 complaints4 involved a crash3 injuries
What owners report most
Latest complaints
- Seat belts
I have been having a problem with the seatbelts on this Sequoia for many years and I have had to go into the dealership several times to get help with stuck seatbelts, seatbelts that didn’t retract and seatbelts that weren’t tight enough. I was told after a service visit that Toyota approved a rear…
I have been having a problem with the seatbelts on this Sequoia for many years and I have had to go into the dealership several times to get help with stuck seatbelts, seatbelts that didn’t retract and seatbelts that weren’t tight enough. I was told after a service visit that Toyota approved a rear middle row seatbelt replacement, but started having other mechanical issues and never scheduled the repair. After getting help for the last time I instructed my kids to be very gentle with the seatbelts and that seemed to help for a long time. They weren’t tight enough, but they were retractable if pulled slowly and carefully. They did get stuck again, but I carefully fed them back into the tract. Well, now I have a seatbelt that will not retract and that Is fully pulled out and not functioning at all, which is a serious safety risk for my daughter and any other passengers that may be in my vehicle. Toyota is now claiming that they have no case file about this issue and that I’m out of luck and will need to pay for the repair myself. It’s terrible that Toyota can hide serious safety design flaws, fail to input claims as promised, not input complaints when you visit for a concern, and not be punished. This is a flawed lifesaving automobile feature that should be corrected.
- Vehicle speed control
While accelerating to pass a vehicle that was signaling and operating well below the speed limit, my vehicle experienced sudden and continued unintended acceleration. I was able to bring the vehicle to a stop while fighting against the engine within an intersection but the engine continued building…
While accelerating to pass a vehicle that was signaling and operating well below the speed limit, my vehicle experienced sudden and continued unintended acceleration. I was able to bring the vehicle to a stop while fighting against the engine within an intersection but the engine continued building revs, bouncing off the limiter while my foot was entirely removed from the accelerator pedal and fully applied to the brake. During this time I had moved the gear selector to neutral, only furthering the engine's revs, and attempted to place the vehicle into park without success, before having to reach beneath my dashboard, foot still on the brake, to pull the accelerator pedal up. I verified both visually and by feel that the pedal was stuck in it's position entirely on it's own, there was no outside object or floormat inhibiting it's ability to return.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2008 Toyota Sequoia. The contact discovered a mileage discrepancy after the purchase. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 143,000. It was later discovered, when the contact received the Title, the mileage was 248,000.
- Seat belts
The drivers seat belt sometime does not retract. One of the seat belts in the middle row retracts slowly or sometimes does not retract. Another seatbelt is very tough to pull out to buckle. I just purchased this vehicle so I’m not sure how long the seatbelts have been an issue.
- Suspension · Unknown or other
My wife pulled out of a parking lot and there was a loud noise and the vehicle began to shudder violently. Approximate speed was 10 mikes an hour and she was able to stop. The drivers side rear suspension airbag had broken through the lower control arm, and was under the rear driver side tire. It…
My wife pulled out of a parking lot and there was a loud noise and the vehicle began to shudder violently. Approximate speed was 10 mikes an hour and she was able to stop. The drivers side rear suspension airbag had broken through the lower control arm, and was under the rear driver side tire. It appears some frame members are cracked as well. Had this happened at highway speeds, it may have resulted in a catastrophic accident. Writer contacted Toyota, as I do not recall being notified of their ZH9 frame replacement program that resulted from a class action settlement, and the rear of the frame is horribly rusted. Vehicle probably would have qualified at that time to be fixed, but am now out of the window. Manufacturers should be made to notify via certified mail, so they know their customers received notifications like this.
- Structure
The contact owns a 2008 Toyota Sequoia. The contact stated that while the vehicle was at the independent mechanic for an oil change, the mechanic informed her husband that the chassis was severely rusted. The dealer and other unknown dealers were notified of the failure and informed the contact…
The contact owns a 2008 Toyota Sequoia. The contact stated that while the vehicle was at the independent mechanic for an oil change, the mechanic informed her husband that the chassis was severely rusted. The dealer and other unknown dealers were notified of the failure and informed the contact that they could not repair the vehicle under Toyota Campaign Number: ZH7 because the campaign had expired. The manufacturer was notified of the failure and confirmed the assessment from the dealers. The vehicle was not repaired. The failure mileage was approximately 30,000. The VIN was unavailable.
- Structure › Body
The contact owns a 2008 Toyota Sequoia. The contact stated that while the vehicle was in for routine service, the independent mechanic discovered that the rear subframe was severely damaged due to rust and corrosion. The contact was advised that holes were present in the subframe, and the vehicle…
The contact owns a 2008 Toyota Sequoia. The contact stated that while the vehicle was in for routine service, the independent mechanic discovered that the rear subframe was severely damaged due to rust and corrosion. The contact was advised that holes were present in the subframe, and the vehicle was unsafe to drive. The vehicle was not repaired. The local dealer and manufacturer were notified of the failure and informed that the vehicle was no longer qualified under the Extended Warranty Coverage for the failure. The failure mileage was 168,000. The VIN was not available.
- Engine
A valve spring in the engine failed causing one cylinder to fail as well. The failure fortunately happened at low speed and the engine didn't seize. This a known problem with Toyota V8s of this model year and was the reason for a recall of Lexus vehicles with the same engine. Had this happened at…
A valve spring in the engine failed causing one cylinder to fail as well. The failure fortunately happened at low speed and the engine didn't seize. This a known problem with Toyota V8s of this model year and was the reason for a recall of Lexus vehicles with the same engine. Had this happened at highway speed, the engine, we were told, could have experienced a total failure causing the engine to seize likely leading to a serious accident. The car is available for inspection at the moment, but this failure requires a total engine rebuild or an engine replacement which are both very costly and we may have to purchase a new car. The car has not been inspected by Toyota, police, insurance or anyone other than a car service center. There were no warning lights, messages or any symptoms prior to the failure. It was sudden with no warning at all. The car has been very well maintained over the years with regular maintenance done on a consistent schedule.
- Unknown or other
Activation of VSC off and slip indicator flashing.
- Structure › Frame and members
The contact owns a 2008 Toyota Sequoia. The contact stated that while the vehicle was at the dealer for an unknown repair, the dealer informed the contact that the sub-frame was corroded. The vehicle was not repaired and remained at the dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 125,000.
- Exterior lighting · Power train · Service brakes
Tony Divino Toyota, a Toyota Motor Company dealership, sold me this vehicle sight unseen knowing I would immediately be towing a boat trailer 350 miles at highway speeds through construction zones on I-80 with children and our dog onboard. I was told it had passed a "160 point inspection" and was…
Tony Divino Toyota, a Toyota Motor Company dealership, sold me this vehicle sight unseen knowing I would immediately be towing a boat trailer 350 miles at highway speeds through construction zones on I-80 with children and our dog onboard. I was told it had passed a "160 point inspection" and was "in great condition". However, when delivered to me the dealership knew it was not road worthy and in fact illegal to drive on public roads due to missing a third brake light, bad rear brakes were bad, the transmission had failed, the battery had failed, the shocks/struts had failed, and a live shotgun shell was rolling around under the drivers seat. Both Toyota Motor Corporation and the dealership refused to address or correct these vehicle defects which could have resulted in a disastrous crash with injury/death to myself and children. This systemic Toyota disregard for used vehicle quality creates a national safety issue with all cars processed through the Toyota Motor Company network.
- Power train · Vehicle speed control
When I'm slowing down for a red light, then the light turns green. And I hit the acceleration the car would jerk. And same thing when I make a left turn. It would jerk and feels like I have no acceleration.
- Service brakes
I had my brakes checked out at a shop in mountain home arkansas, mountain motors hwy 5 n.. Asking that they bleed and inspect as necessary ,and check torques. After an hour and twenty minutes I was told that the bleeder on one caliper broke off! They did not replace the bleeder, they said it would…
I had my brakes checked out at a shop in mountain home arkansas, mountain motors hwy 5 n.. Asking that they bleed and inspect as necessary ,and check torques. After an hour and twenty minutes I was told that the bleeder on one caliper broke off! They did not replace the bleeder, they said it would be ok! The brakes failed completely less than 1000 later! We were lucky, the pedal went to the floor in a small town in wisconsin. We were moving slow and I coasted into a parking lot! The vehicle had to be towed and $750.00 later we continued our trip. there IS no regulatory agency in arkansas,and the repair shop IS ignoring me! Can you help? I have reciepts.
- Seats · Structure › Body · Unknown or other
The back cover of the middle seats are broken and removed.i tried to replace them but, I can not. The irons that hod the seat are uncorvered and not safe . When people ,if they have long legs I do not think it IS safe safe for them. the car IS not able to player neither radio nor cds. When trying to play either radio or cd, it makes a crazy noise. The vehicule IS still in motion.
- Engine · Unknown or other
Good afternoon, during the drive-thru and the car, started to shake, and the engine stops. after that, I contacted the tow-truck and brought it to toyota dealer. the dealer has finally opened the engine, and the result was the valve spring was broken in half, and the spark plug also melted. *tr
- Structure › Body
Toyota service said the rear sub-frame IS rusting and eventually rear wheels could separate from vehicle. This was discovered while toyota was replacing the main frame under a class action suit.the sub-frame was not included in the suit' therefore toyota wants me to pay the entire cost of $2550
- Unknown or other
The frame on my toyota sequoia has rusted.this condition IS common to these vehicles.however mine has and the alignment rusted in the area that the alignment adjusters are located.i recently purchased new tires and an alignment could not be performed, as a result my vehicle IS unsafe! The frame must be replaced!
- Structure › Body
My vehicle involved in a recall in which there IS excessive rust in the frame mainly in states where there IS snow and uses salt in roads, michigan IS one of these states where I use to live and my car IS registered in, however I just relocated to ca few month ago, the dealership and toyota…
My vehicle involved in a recall in which there IS excessive rust in the frame mainly in states where there IS snow and uses salt in roads, michigan IS one of these states where I use to live and my car IS registered in, however I just relocated to ca few month ago, the dealership and toyota acknowledge that my vehicle IS affected with this recall, however toyota refuse to do it in the state of california! But if I take my car back to michigan they will do it, its 3000 miles away and not planing to go back please help toyota case # 1902071493
- Power train
S10 direct reply - letter addressed to president trump requesting assistance with defective toyota sequoia. *Ld the consumer stated the vehicle would release from park without being started or without the key in the ignition. The consumer's 7 year old grandson pulled the gear shift causing the…
S10 direct reply - letter addressed to president trump requesting assistance with defective toyota sequoia. *Ld the consumer stated the vehicle would release from park without being started or without the key in the ignition. The consumer's 7 year old grandson pulled the gear shift causing the vehicle to roll into the garage. On a separate occasion, while exiting the vehicle, the consumer accidentally knocked it out of gear. The consumer received an injured knee, shoulder, and lower back. *Js
- Electrical system · Structure › Body
Rusty parts (rust extended warranty) the back window on my 2008 toyota sequoia fell down abruptly while traveling on the highway. The vehicle was in motion. Items flew from my back window and I was forced to slow down abruptly and prevent drivers in my rear from being in an accident. After…
Rusty parts (rust extended warranty) the back window on my 2008 toyota sequoia fell down abruptly while traveling on the highway. The vehicle was in motion. Items flew from my back window and I was forced to slow down abruptly and prevent drivers in my rear from being in an accident. After pulling over, I had to retrieve those items on a busy roadway. I attempted to diagnose the issue by powering the window back up, but it wouldn't work. I attempted to push the window to the up position and it would not work. I had to secure my items and drive home slowly. Later that day, I conducted some research online and found out the 1ST generation sequoia was issued a recall for the same exact problem. Apparently, the issue was due to a faulty window regulator from rust. Unfortunately, I do not see any recalls for the 2ND generation models. I took my vehicle to a local mechanic and once they examined the back door, they diagnosed that the cause for the window falling down abruptly was indeed from a rusty regulator and rusty parts. I conducted more research and found out that toyota has been infamous for installing parts that rust over time. toyota issued an extended warranty for rust, but it doesn't state specifically what it covers. I contacted toyota and they instructed me to take it into a toyota dealership. I was told that the rust extended warranty recall pertains only to the undercarriage of the vehicle and not anything else. The notice IS the mail did not specify the undercarriage. My rusty parts are not covered under the extended warranty for rust. It IS not right that toyota IS finding a way to remove themselves from any liability with their vehicles developing rust over a quick period of time. If a recall was issued for rust on the frame, that's an indicator that toyota uses poor quality parts.
- Vehicle speed control
TL* the contact owns a 2008 toyota sequoia. While driving approximately 10 mph, the accelerator pedal became stuck to the floorboard and caused the vehicle to accelerate to a high speed. The contact mentioned that the brake pedal had to be depressed with extreme force to stop the vehicle. The…
TL* the contact owns a 2008 toyota sequoia. While driving approximately 10 mph, the accelerator pedal became stuck to the floorboard and caused the vehicle to accelerate to a high speed. The contact mentioned that the brake pedal had to be depressed with extreme force to stop the vehicle. The contact stated that the vehicle was repaired per nhtsa campaign number: 10v017000 (vehicle speed control) years earlier; however, the remedy failed. The dealer was not contacted. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 88,000. The vin was not provided.
- Suspension
Vehicle was purchased used in may 2011 with 60,000 miles on it. it currently has 100,440 miles on it.. at the time of purchase from a dealer, an under car inspection indicated no visible rust to speak of and paint/finish was still patent on rear suspension, at the last oil change oil change, the…
Vehicle was purchased used in may 2011 with 60,000 miles on it. it currently has 100,440 miles on it.. at the time of purchase from a dealer, an under car inspection indicated no visible rust to speak of and paint/finish was still patent on rear suspension, at the last oil change oil change, the tech noted the extensive rust on the rear suspension and commented that his toyota tundra a few years older had a recall for severe rust and replacement for the same thing, and that this would likely be subject to a recall too in time. the vehicle was taken to a toyota dealer today for a frame inspection under the extended frame warranty and the frame was declared faulty for a small rust through area and will be replaced. however the entire rear suspension and cross frame were severely rusted through and crumbling, which they said was not covered under the frame warranty. this presents a severe safety situation since this suspension could fail at any time causing a serious accident. since this problem occurred in the past on toyotas and resulted in a recall, it should be considered again for this make and model. at no time during our ownership has it been in or near salt water, nor ever submerged in fresh water. it's stored outside on an asphalt driveway year round and used primarily as a back up for our main vehicle. unfortunately the dealer removed it from the hoist before I could get a photo of it in current condition.
- Structure › Body
The rear liftgate on our 2008 toyota sequoia started acting up late may 2016. The liftgate lock actuator began getting stuck and very difficult to open. Now it cannot be opened by neither the power liftgate button nor manually with the handle. We can see that there IS evidence of excessive rust on…
The rear liftgate on our 2008 toyota sequoia started acting up late may 2016. The liftgate lock actuator began getting stuck and very difficult to open. Now it cannot be opened by neither the power liftgate button nor manually with the handle. We can see that there IS evidence of excessive rust on the actuator. It has seized and are now very concerned that in case of an emergency we will not be able to escape through the rear of the vehicle should all other exits are blocked. Not even the rear window IS working and believe that there IS a defect affecting the components inside the liftgate itself. Upon researching the matter we have discovered that there are several similar complaints from owners of the same vehicle. We feel this warrants an investigation into this safety-related defect to find out what IS causing the excessive rust/corrosion and mechanical failure.
- Seat belts
Two seatbelts, both for the middle row bucket seats, failed. they both stopped retracting properly and had to be replaced. Luckily, we were not involved in an accident.
- Structure › Body
I was driving on I-15 in utah when my passengers heard honking and looked around. Suddenly a white car swerved close to me and cut me off. The driver was looking down and continued to swerve around. Then slowed and put on her flashers. She continued to swerve and then followed us off the freeway.…
I was driving on I-15 in utah when my passengers heard honking and looked around. Suddenly a white car swerved close to me and cut me off. The driver was looking down and continued to swerve around. Then slowed and put on her flashers. She continued to swerve and then followed us off the freeway. She stopped at the stop light and said we had hit her. I said that was a lie and she had been swerving into my lane and people were honking at her. We drove to ikea and she did not follow. Then I filed this complaint. I am concerned for the safety of me and my passengers. She was not friendly. I attached her license number.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197494Technician Certification Requirements.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10190449OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0044-16.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10183281TT: HVAC drain tube is found to be blocked/clogged.
Every Toyota Sequoia model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.