2016 Chrysler 300
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Chrysler › 300 › 2016
These records cover every 2016 Chrysler 300. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2016 Chrysler 300. Newest first.
Chrysler (FCA US LLC) is recalling certain Mopar Stage 1 Kit Performance Packages Powertrain Control Modules (PCM) Part Numbers P5160023, P5160025, and Demon Crate PCM Part Number 68412287AA. The PCMs are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short…
Risk and remedy
Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will either perform a software update or replace the PCM, free of charge. The recall began July 26 , 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U82, and U83.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb)…
Risk and remedy
Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain 2014-2017 Dodge Charger and Chrysler 300 vehicles equipped with all-wheel drive (AWD). The front driveshaft bolts may loosen and allow the front driveshaft to disconnect, potentially causing a loss of motive power.
Risk and remedy
Risk
A loss of motive power can increase the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace all eight front driveshaft bolts, free of charge. The recall began April 7, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T03.
Owner complaints
76 complaints9 involved a crash1 involved a fire5 injuries
What owners report most
Latest complaints
- Structure › Interior panels › Door
The contact owns a 2016 Chrysler 300. The contact stated that while driving at undisclosed speeds, the interior door panel on all four doors was shuddering while the windows were rolled down due to the air resistance. The contact stated that while attempting to depress the button to unlock the door…
The contact owns a 2016 Chrysler 300. The contact stated that while driving at undisclosed speeds, the interior door panel on all four doors was shuddering while the windows were rolled down due to the air resistance. The contact stated that while attempting to depress the button to unlock the door on the driver’s side door, the door failed to unlock as needed. The local dealer was contacted; however, the vehicle was not repaired because the warranty had expired. The contact was adamant that the failure was a safety issue. The manufacturer was made aware of the failure. The failure mileage was approximately 11,500.
- Air bags
The contact owns a 2016 Chrysler 300. The contact stated that while driving on a four-lane roadway, at approximately 45 mph, another driver attempted to make a left turn with an obstructed view, ran a red light and collided with the front driver side area of the contact's vehicle near the wheel…
The contact owns a 2016 Chrysler 300. The contact stated that while driving on a four-lane roadway, at approximately 45 mph, another driver attempted to make a left turn with an obstructed view, ran a red light and collided with the front driver side area of the contact's vehicle near the wheel well. Following the impact, the other vehicle spun and struck an additional vehicle. No further property damage was reported. After the collision, the contact's vehicle veered to the right and came to a stop in a vacant lot away from oncoming traffic. The airbags did not deploy, and no warning lights illuminated. The vehicle was subsequently towed to a tow yard and later declared a total loss by the insurance company. The contact sustained injuries to the forehead after striking the windshield due to forward movement during the collision and was then thrown backward into the rear seat. Medical treatment was received following the incident. The dealer was not notified of the issue. The manufacturer was not notified of the issue. The approximate failure mileage was 102,000.
- Electrical system › Instrument panel › Speedometer/odometer
The contact purchased a 2016 Chrysler 300. The contact stated that shortly after purchasing the vehicle, the vehicle was taken to a dealer for several repairs, and the contact was concerned that there was a mileage discrepancy as per a Carfax Report. The vehicle was a dealer sale. At the time of…
The contact purchased a 2016 Chrysler 300. The contact stated that shortly after purchasing the vehicle, the vehicle was taken to a dealer for several repairs, and the contact was concerned that there was a mileage discrepancy as per a Carfax Report. The vehicle was a dealer sale. At the time of purchase, the mileage was 117,338; however, the Carfax Report indicated that the mileage was 156,268 in February 2017. The Carfax Report also stated that the odometer had previously been tampered with in 2017 and indicated a mileage of 5,093 instead of 7,542. The contact stated that currently the approximate mileage was 166,801.
- Fuel/propulsion system
Notified by repair shop that my vehicle is experiencing identical problems with the fuel rail and fuel injector that was recalled for Mercedes in my class and year, but the dealer says my VIN is not applicable currently. Recall campaign number is 2022030003 and NHSTSA ID is 21V961. Was informed by dealer to call customer care at Mercedes, and subsequently informed by Mercedes to fill out this form.
- Engine
The oil filter housing w/sender unit leaks oil under the upper intake plemun. The oil filter Chrysler installed in the vehicle is plastic.
- Electrical system · Fuel/propulsion system
Fuel pump lid is electrical connection is cause a malfunction when fuel up and burning a hole in the electrical connection causing fuel to leak out under the back seat this need to be fix before someone is killed do to a fire this is the 2n time being replace and the same issue
- Fuel/propulsion system
When gas tank is filled with more that 3/4 of a tank of gas, fumes are very strong within the vehicle and around it. This continues until the gas tank has less than 3/4 of a tank of gas. There is a recall for the evap canister on my year, make and model...but my VIN is not included.
- Electrical system · Engine
1- Electrical components lost communication with all module I have diagnostic from dealer. 2- When happened car loose power putting my own safety and other at risk I don’t feel safety no more and all possible lights on dashboard come on. 3- I bring my car to dealer to do a diagnostic and said need…
1- Electrical components lost communication with all module I have diagnostic from dealer. 2- When happened car loose power putting my own safety and other at risk I don’t feel safety no more and all possible lights on dashboard come on. 3- I bring my car to dealer to do a diagnostic and said need change whole car harness, at time that dealer check 68 DYC was show, before happening to me twice and brin to shop close to my house one time has 85 DTC and second time 63 DTC I have diagnostic copy from dealer and from shop. 4- Dealer diagnosed my car. 5- It happened suddenly not warning at all when happened have to stop as soon as I can turn off engine and wait some minutes and turn on again after that engine light come on all the time and car can driving again. 6- Also a year ago on march last year my car was updated from Uconnect and a corrupt file from them damaged my radio they have to install a new radio with new software update for this reason at Uconnect expense, don’t know if this is related to this new problem that I have now, also send you the diagnostic at that time.
- Electrical system · Power train · Steering
Have been having power steering problems over the past few years. Started by displaying a shift to park message while driving, my car would then lose power and shut down completely and power steering would lock up. Have taken to dealerships and independent mechanics and was told it was the wiring…
Have been having power steering problems over the past few years. Started by displaying a shift to park message while driving, my car would then lose power and shut down completely and power steering would lock up. Have taken to dealerships and independent mechanics and was told it was the wiring harness which they repaired several times and the car continued to have the issue. Approximately 3 months ago I was driving 55mph on highway when suddenly without any warning, the power steering failed and locked up making it very difficult to turn the wheel to get the vehicle off the highway safely. The power steering locking up put myself, my passengers and other drivers at risk bc I had no control over the steering. When I got the vehicle off of the highway a message repeatedly coming on and off saying “service power steering “ and another message saying power steering assist off service system. I was able to get the vehicle home, however the steering was extremely difficult especially in turns which is a major safety concern increasing a risk of an accident. I have done a lot of research about this issue and have found that there are numerous others with the same issue and same make/model as my 2016 Chrysler 300 C. I took the vehicle to another independent mechanic and they told me they couldn’t figure out what is wrong with it. I made another appointment with another mechanic and when I attempted to drive it “manually” as I had to do when it initially started doing this, the electric power steering has now completely locked up and the wheel is not functional at all and power steering has completely failed. This is not only a huge inconvenience but a serious safety hazard and should be investigated by the manufacturer.
- Electrical system · Steering
The contact's son owns a 2016 Chrysler 300. The contact stated that the horn was inoperable. Additionally, the contact stated while her son was driving 60-65 MPH, the vehicle lost power steering functionality inadvertently. There was no warning light illuminated. The contact stated that the driver…
The contact's son owns a 2016 Chrysler 300. The contact stated that the horn was inoperable. Additionally, the contact stated while her son was driving 60-65 MPH, the vehicle lost power steering functionality inadvertently. There was no warning light illuminated. The contact stated that the driver was able to veer to the side of the road. The contact stated that the driver turned off and restarted the vehicle, and the power steering became functional. The contact stated that the driver was able to drive to the residence. The vehicle was taken to an independent mechanic, where the failure could not be duplicated, and the contact was referred to the dealer. The dealer was contacted, and an appointment was scheduled for a diagnostic test. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 31,000.
- Engine
oil filter housing, oil pulled to back of engine creating hole, all oil leaked out.
- Electrical system · Fuel/propulsion system
Main Fuel Pump and accompanied electrical connect. The fuel pump and electrical wiring harness is available upon request. My safety was at risk due to a faulty electrical connection inside the fuel tank. My vehicle made a loud hmming sound at a stop sign, upon continuing forward the vehicle shut…
Main Fuel Pump and accompanied electrical connect. The fuel pump and electrical wiring harness is available upon request. My safety was at risk due to a faulty electrical connection inside the fuel tank. My vehicle made a loud hmming sound at a stop sign, upon continuing forward the vehicle shut off randomly. Upon inspection, the fuel was not sending to the engine. We bought a new fuel pump and replaced at the side of the road. When inspecting the OEM fuel pump and accompanied electrical connection, we noticed over heated wiring and melts plastic inside the fuel tank on the underside of the fuel pump, as well as burnt connections on the outside of the fuel tank on the tip side of the fuel pump. We have pictures to support. No warning signs, signals, or lights were present at the time of failure. When purchasing new fuel pump, there were no instructions for replacement of electrical connections. The only indication we found as to what was happening was through public forums online, showing the electrical wiring was faulty and needed replacing with the alternative wiring harness due to wiring (hot wire, b+) being located too close to the grounding wiring causing it to burn amd/or arch creating a problem with which could cause fire and explosion. No information was readily available nor have we received any information on potential catastrophic injury or failure.
- Engine
The contact owns a 2016 Chrysler 300. The contact stated while driving at an undisclosed speed, he heard an abnormal clicking sound coming from the engine compartment. No warning lights were illuminated. The vehicle was taken to an independent mechanic, who diagnosed failures with the connecting…
The contact owns a 2016 Chrysler 300. The contact stated while driving at an undisclosed speed, he heard an abnormal clicking sound coming from the engine compartment. No warning lights were illuminated. The vehicle was taken to an independent mechanic, who diagnosed failures with the connecting rod bearings and hydraulic roller lifters. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 180,000. The VIN was not available.
- Air bags · Unknown or other
Door panels are separating from all interior doors. Separating has caused issues with doors locking and airbag deployment. This is an issue the manufacturer has been aware of for years yet still manufactures cars with this issue. Chrysler and Dodge vehicles. Issue is so common that replacement parts, which are not covered by manufacturer's warranty and can cost anywhere from $1000+ per door, are backordered.
- Power train · Steering · Structure › Body
The bolts were loose on the driveshaft on the all-wheel-drive, which caused them to have to replace the entire driveshaft! If the driveshaft would’ve broke, whoever was driving the vehicle, whether it be me, or with my son in it, we would’ve wrecked and possibly died! The problem has been confirmed…
The bolts were loose on the driveshaft on the all-wheel-drive, which caused them to have to replace the entire driveshaft! If the driveshaft would’ve broke, whoever was driving the vehicle, whether it be me, or with my son in it, we would’ve wrecked and possibly died! The problem has been confirmed with a certified dealer! There is no warning signals. There was nothing and there is a recall on the same. There is a recall for the exact same problem as my car, and now they will not cover it because it doesn’t show up on the Vin! This is a very dangerous safety issue and Chrys learning to address this as soon as possible! Especially after one of their managers told me it would be paid for if I had a diagnosed with a certified dealer and now they’re saying they’re not paying for it
- Back over prevention
The contact's daughter owns a 2016 Chrysler 300. The contact stated that the back-over prevention camera displayed a distorted image while in use. The contact stated that an unknown dealer was notified of the failure. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 103,000.
- Air bags
The door molding on the passenger side is now over 1 inch pulled away from the window because of heat. The door molding may cause issues when/if the airbags are deployed. Now two other doors are having the same issue but not as large of a gap between the window and molding.
- Power train
The contact owns a 2016 Chrysler 300. The contact stated while driving at an undisclosed speed, the power train warning light illuminated. The contact stated that when she arrived at her destination and proceeded to park the vehicle, the gear shifter was inoperable. The contact stated that she…
The contact owns a 2016 Chrysler 300. The contact stated while driving at an undisclosed speed, the power train warning light illuminated. The contact stated that when she arrived at her destination and proceeded to park the vehicle, the gear shifter was inoperable. The contact stated that she waited for several minutes, and the gear shifter became operable, and she was able to safely park the vehicle. The contact stated that the failure occurred previously, and the gear shifter was replaced but the failure reoccurred. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 130,000.
- Unknown or other
Passenger door panel warping. Large gap between panel and window. This will eventually affect the window functioning, as well as the air bag. This IS dangerous and can be life threatening.
- Structure
The contact owns a 2016 Chrysler 300. The contact stated that water was leaking from the rear passenger’s side of the vehicle. Additionally, the contact stated that the window trim on the rear driver's side door had detached. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The approximate failure mileage was 40,000.
- Air bags · Unknown or other
Door panels are separating from interior passenger door. Separating has caused issues with doors locking and airbag deployment. This is an issue the manuafaturer has been aware of for years yet still manufatures cars with this issue. Chrysler and Dodge vehicles. Issue is so common that replacement…
Door panels are separating from interior passenger door. Separating has caused issues with doors locking and airbag deployment. This is an issue the manuafaturer has been aware of for years yet still manufatures cars with this issue. Chrysler and Dodge vehicles. Issue is so common that replacement parts, which are not covered by manufacturers warranty and can cost anywhere from $1000+ per door, are backordered. http://www.chryslerproblems.com/300-warped-door-panels/ https://www.300cforums.com/threads/2016-chrysler-300-door-panels.277838/ https://www.carcomplaints.com/Chrysler/300/2016/accessories-interior/ https://www.motorbiscuit.com/a-lawsuit-accuses-dodge-of-failing-to-repair-defective-charger-models/ https://www.carcomplaints.com/news/2021/chrysler-warped-door-panel-lawsuit-party-dismissed.shtml https://www.chargerforums.com/threads/interior-door-panels-peeling-lifting-on-newer-dodge-chargers-update-class-action-lawsuit-active.387463/page-7 https://www.carcomplaints.com/news/2020/chrysler-300-dodge-charger-door-panels-coming-off.shtml
- Air bags · Electrical system · Unknown or other
Both front door panels severely warped to the point of Cracking and causing the door locks to bind and to also cause the possibility that side air bags may not deploy as designed or deploy prematurely. Warranty and Extended Warranty refused repair claims citing manufacturer defects. Repair estimate over $2000.
- Air bags
Unknown, plastic around window frame is popping off. I believe it to be due to heat however was advised it may cause side air bag deployment issues. After googling I found this to be a known issue
- Electrical system · Steering
I was sitting at a stop light waiting to make a left turn when the electrical power steering randomly failed. This issue made it near impossible to turn the car and caused me to almost crash into a light pole when I tried to make the left turn. I then made an attempt to turn into a parking lot to…
I was sitting at a stop light waiting to make a left turn when the electrical power steering randomly failed. This issue made it near impossible to turn the car and caused me to almost crash into a light pole when I tried to make the left turn. I then made an attempt to turn into a parking lot to get off the road almost causing me to wreck the car a second time. I have been told by multiple mechanics that this electrical power steering failure is not a common issue with newer vehicles. I want to submit this claim to make it known this make and model has this issue
- Engine · Power train · Service brakes
ABS system failed. Front axel disconnected and now needs replaced along with both CV boots. It is now effecting the Carrier Barring (Drive shaft)
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11005320"Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
- 10251783Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10247995Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10247948Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10247906ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10247905ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
- 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
- 10243192Suspected engine coolant leak.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10241118Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
- 10239957Water Quality When Mixed With Engine Coolant
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10234468Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10234420Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10234379ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10234378ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10230301Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
- 10230183No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10230029Customer Complaint May Include Engine Oil Leak Or Consumption
- 10229810Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229255Transmission Oil Pan, Heater (TMU), Tube or O-ring Applies to vehicles equipped with 8 speed transmissions only; if you have a leak that appears to be at the pan the use of proper leak detection is recommended. The fluid in the 8 speeds can be detected with a black light and there are aftermarket spray on leak detection materials to help ensure that the leak is properly diagnosed and not from another location such as cooler lines, heater tubes, or case porosity. Please note that the transmission pan gasket is available for many of the 8 speed applications FCA offers. Please review the available quick connect and transfer tube parts, as replacement of the TMU may not be required. If a TOC line connection is found to be the source, the quick connect may need replacement. If the leak source is coming from the connection of the TMU to the transmission, the transfer tube may need replacement. When parts are returned to the QEC the retaining clips (snap ring) for the quick disconnect fittings are missing. (This leaves a question as to whether the clips were missing from the assembly plant, or the technician removed them in order to make line removal easier.) Please return the clips with the transmission heater and note if they were not there to begin with. For any questions regarding transmission heater, contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
- 10229031Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10228989Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- 10228101Panasonic 8.4" CTP/FCTP Radio, Update Failure Issue 1: Hand Free Module inoperative, can't pair phone: - Do not replace the radio for phone issues. The Radio does not control phone/Hands Free functionality, it is separate from the radio, test and diagnose the Hands Free Module accordingly.~ Issue 2; Radio inoperative, no power, display no power or screen is blank.~ Blank Screen with Audio: The ICS is a separate module from the radio. If attempting to replace the display (ICS), do not order a radio part number. Instead, order p/n Z5064993A$ for an exchange or 05064993A$ for a new part replacement.~ Issue 3.; If the radio ICS/touchscreen display appears to reset intermittently, it turns white then black and functionality returns....Please contact Leony Gonzalez at cell (248) 736-1267 or Dave Clemons at cell (248) 520-0419. Engineering is currently root causing this issue and your assistance is greatly appreciated. If unable to reach this person within 15 minutes, then proceed with the necessary repair. NOTE: USB cables should be replaced prior to the HFM or Radio. ~
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10227969Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold For concerns of V8 oil filter leaks on 22MY and up vehicles: 1. Clean the area and use oil dye to know the exact location of the leak with black/UV light. 2. Removal torque (force needed to loosen the filter) 3. If the source of the leak cannot be identified, please contact FCA Redacted Content to FasTrak parts back for analysis. If no response in 15 minutes, proceed with repair and email pictures of the following: A) Oil filter from the bottom to know if it has a "Factory Installed" filter. B) Leak. C) Damage in filter (if any) D) Gasket. E) Block or Oil Filter Adapter(OFA) or Engine Oil Cooler(EOC) sealing surface.
- 10227712Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
- 10226262Integrated Center Stack If vehicle is found within 50 mile radius of the Detroit Metro area please hold vehicle and contact:~ Contact one of the following:~ Daniel Acciacca CELL (586) 709-1537~ Michael Savich CELL (248) 214-7270~ Ayed Hadaad CELL (248) 941-8707~ Issue: On a 2015 & 2016MY LA (Challenger), LD(Charger) and LX (300), the Integrated Center Stack (ICS) may experience a lock-up/Inop condition (complete loss of functionality) during any vehicle diagnostic session (reading fault codes, clearing fault codes, reflashing of any module, etc.). If this occurs, do not replace the ICS. The module functionality can be restored if it is reset by disconnecting power to it (by removing fuse, battery disconnect or module connector disconnect).~
- 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10224898Trans Oil Pan, Heater Tube or O-ring, Heater Applies to vehicles equipped with 8 speed transmissions only; If you have a leak that appears to be at the pan the use of proper leak detection is recommended. The fluid in the 8 speeds can be detected with a black light and there are aftermarket spray on leak detection materials to help ensure that the leak is properly diagnosed and not from another location such as cooler lines, heater tubes, or case porosity. If you have a leak concern please note that the transmission pan gasket is available for many of the 8 speed applications FCA offers. See your parts specialist for the proper gasket for the repair.
- 10224894Cam Phasers, Oil Control Valve For Malfunction Indicator Light (MIL) issues related to 2012-2017 3.6L Pentastar engines, please note that there is a new diagnostic procedure available in DealerCONNECT for P-codes in relationship to cam phasers. Please use this new information for trouble shooting of cam phasers and oil control valves for MIL on issues.
- 10224887RES / RHA / REB Radios That Support Bluetooth and Hands-Free 1. For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands; DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Hands Free Module (and associated components) are the systems responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis. Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
- 10224882Valve Cover and Gasket, Left and Right Pertains to vehicles equipped with a 3.6L V6 V.V.T. Engine only: Oil leaking from the valve cover onto the O2 sensor causing faults codes P0140, P2096, P0137, P0157. Need to verify the leak source and cause (gasket pinched, out of position, rolled, or cut). Please call one of the individuals below before proceeding with the repair. Also, if possible take a picture and send it to the emails listed below. First: Scott Knaggs - Cell (313) 363-6937 scott.knaggs@facgroup.com Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com If no response in 15 minutes, proceed with repair.
Every Chrysler 300 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.