2006 Dodge Durango
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Durango › 2006
These records cover every 2006 Dodge Durango. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2006 Dodge Durango. Newest first.
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge…
Risk and remedy
Risk
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Chrysler (FCA US LLC) is recalling certain model year 2005-2009 Dodge Ram 2500, 2004-2008 Dodge Ram 1500 and Durango, 2006-2009 Dodge Ram 3500, 2008-2010 Dodge Ram 4500 and 5500, 2007-2008 Chrysler Aspen, 2005-2010 Chrysler 300, 300C, 300S, and SRT8, 2006-2010 Dodge Charger, 2005-2008 Magnum, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles.…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the affected Chrysler and Dodge owners and Mitsubishi will notify the affected Raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for Chrylser on June 8, 2015. The recall for Mitsubishi started on June 24, 2015. Chrysler and Dodge owners may contact Chrysler customer service at 1-800-853-1403. Mitsubishi owners may call 1-888-648-7820. Chrysler's number for this recall is R25. Note: This recall supersedes recall 14V817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
On some sport utility vehicles, under certain operating conditions, an integrated circuit in the instrument cluster that controls interior lighting may overheat.
Risk and remedy
Risk
This could potentially cause an instrument panel fire.
Remedy
Dealers will inspect the cluster for damage and replace it free of charge. the recall began on april 2, 2007. owners may contact daimlerchrysler at 1-800-853-140.
On certain sport utility vehicles, the left rear suspension watts link may have been damaged during vehicle assembly and could fail.
Risk and remedy
Risk
A failed watts link could adversely affect vehicle handling and cause a crash without warning.
Remedy
Dealers will replace the left rear suspension watts link free of charge. the recall began on july 19, 2006. owners may contact daimlerchrysler at 1-800-853-1403.
On certain vans and sport utility vehicles, the front windshield wiper motor armature shaft may break.
Risk and remedy
Risk
During certain operating conditions, loss of front windshield wiping capability could occur, and the driver's vision could be obscured which could result in a crash.
Remedy
Dealers will inspect and replace the windshield wiper motor free of charge. the recall began on june 19, 2006, to dodge durango owners. minivan owners will be notified during july 2006. owners may contact daimlerchrysler at 1-800-853-1403.
Certain sport utility vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 208, 'occupant crash protection.' the wrong occupant restraint controller (orc) was installed on these vehicles.
Risk and remedy
Risk
This can cause increased risk of injury to the driver under certain crash conditions.
Remedy
Dealers will replace the occupant restraint control module. the recall began on february 27, 2006. owners may contact daimlerchrysler at 1-800-853-1403.
On certain pickup trucks and sport utility vehicles, a static electricity spark between the operator and the vehicle can cause the turn signal, headlamps or windshield wipers to malfunction without warning.
Risk and remedy
Risk
This can impair the driver's vision and result in a crash.
Remedy
Dealers will re-flash the instrument cluster. The recall began on march 6, 2006. owners may contact daimlerchrysler at 1-800-853-1403.
On certain sport utility vehicles with anti-lock brake system (ABS), the ABS control module software program may cause the rear brakes to lock up during certain braking conditions.
Risk and remedy
Risk
This could result in a loss of vehicle control and a crash could occur without warning.
Remedy
Dealers will reprogram the ABS control module. the recall IS expected to begin on december 12, 2005. owners may contact daimlerchrysler at 1-800-853-1403.
On certain pickup trucks, sport utility and passenger vehicles equipped with 42rle automatic transmissions, the cup plug that retains the park pawl anchor shaft may be improperly installed. if the shaft moves out of position, the vehicle may not be able to achieve 'park' position.
Risk and remedy
Risk
If this occurs and the parking brake IS not applied, the vehicle may roll away and cause a crash without warning.
Remedy
Dealers will inspect the transmissions and install a bracket to ensure the park pawl anchor shaft IS retained in the proper position. the recall began on november 28, 2005. owners may contact daimlerchrysler at 1-800-853-1403.
Owner complaints
852 complaints16 involved a crash9 involved a fire19 injuries
What owners report most
Latest complaints
- Fuel system, gasoline
The contact owns a 2006 Dodge Durango. The contact stated that upon starting the vehicle, there was an abnormal gasoline odor coming from the vehicle with the check engine warning light illuminated. The contact inspected the vehicle and discovered fuel leaking on the top of the fuel tank. The manufacturer was not notified of the failure. The failure mileage was 180,000.
- Fuel/propulsion system
Vehicle: 2006 Dodge Durango VIN: [XXX] Issue Type: Fuel System / Safety Hazard Description: During refueling, the vehicle repeatedly shuts the pump off and then sprays gasoline back out of the filler neck, creating a fire and injury hazard. This is a known defect covered under Dodge Customer…
Vehicle: 2006 Dodge Durango VIN: [XXX] Issue Type: Fuel System / Safety Hazard Description: During refueling, the vehicle repeatedly shuts the pump off and then sprays gasoline back out of the filler neck, creating a fire and injury hazard. This is a known defect covered under Dodge Customer Satisfaction Notification X39, which extends warranty coverage for the inlet check valve / ORVR failure on 2006–2008 Durango models. The symptoms match the documented defect exactly: pump shutoff, fuel expulsion, and fuel spray. This occurs at multiple stations and with different pumps. Stellantis customer service and local dealers have been unresponsive and will not acknowledge X39 unless forced. The defect poses a clear safety risk to me and others nearby during refueling. I am requesting NHTSA involvement to ensure Stellantis honors the X39 warranty extension and addresses this fuel system hazard. Safety Risk: Gasoline sprays out under pressure, contacting the vehicle, ground, and the person refueling. This is a fire hazard and exposes the user to fuel on skin and clothing. The condition is unpredictable and dangerous. Requested Action: Require Stellantis to inspect and repair the vehicle under CSN X39 and ensure compliance with the documented unlimited‑time warranty extension for this defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Fuel/propulsion system
Fuel spills out when you fill it up. I read there were safety recalls due to this issue for 2006 Dodge Durango's but a recall isn't appearing for my vehicle. When filling it fills fine until almost a full tank. Once it reaches full tank the gas pump clicks off then a gush of fuel spills out of my…
Fuel spills out when you fill it up. I read there were safety recalls due to this issue for 2006 Dodge Durango's but a recall isn't appearing for my vehicle. When filling it fills fine until almost a full tank. Once it reaches full tank the gas pump clicks off then a gush of fuel spills out of my car. I bought it last year and it does it every time we put a full tank in it if you don't catch it and manually shut pump off before full. Bought the car used
- Air bags
The contact owns a 2006 Dodge Durango. The contact stated that while driving at an undisclosed speed, another vehicle abruptly merged into his lane in front of him, prompting him to rapidly decrease speeds. However, the vehicle ahead was too close; as a result, the contact collided with the rear of…
The contact owns a 2006 Dodge Durango. The contact stated that while driving at an undisclosed speed, another vehicle abruptly merged into his lane in front of him, prompting him to rapidly decrease speeds. However, the vehicle ahead was too close; as a result, the contact collided with the rear of the other vehicle, forcing his vehicle to careen to the shoulder of the roadway before coming to a complete stop. The air bags did not deploy. The air bag warning light was illuminated. A police report was filed, and no injuries were reported. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 15V313000 (Air Bags); the VIN was included, and the vehicle was repaired. The manufacturer was not notified of the failure. The failure mileage was 231,000
- Fuel/propulsion system
Every time filling full of gas, once full it SPRAYS gas into the air for 2 to 3 seconds. It's evident this is a manufacturing defect as multiple self reported incidents can be found online throught the years. This is vreating a significant fire risk as other vehicles can be pulling up near by. Date provided isn't accurate as this is constant if we let it fill
- Fuel/propulsion system · Power train · Unknown or other
Several repairs for sensor Labor: Check and advise the check engine light is on and the vehicle wants to stall when accelerating. Vehicle loses engine power but has not stalled completely (low/reverse solenoid circuit. Test and replaced transmission solenoid assembly; cost: $819.65, prior to…
Several repairs for sensor Labor: Check and advise the check engine light is on and the vehicle wants to stall when accelerating. Vehicle loses engine power but has not stalled completely (low/reverse solenoid circuit. Test and replaced transmission solenoid assembly; cost: $819.65, prior to that $1200.00, $546.00. I'm unemployed and the truck costing more repairs. The plastic on radiator has cracked all the way cross and leaks coolant, stop radiator leak encourage by dealership and to seal leak or replace radiator (it's upsetting and its cost me thousands of dollars, my last two SUV was dodge Durango and I love them but this one has given the most problems and cost me financially. Plus, when I purchased the dealership replace windshield because of flaw in glass and it wasn't repaired correctly and Oakland County Sheriff said my truck was dangerous, but you said it was fine. Plus, the wrapped chrome grill has been replaced twice because it bubbles up. Information listed at your dealerships: Purchased at Milosch's Palace Chrysler Jeep Dodge (work performed) 3800 S. Lapeer Rd Lake Orion, MI 48359 Milosch Dodge Inc. 677 S. Lapeer Rd Lake Orion, MI 48326 Golling Chrysler Jeep Dodge Inc 2405 S. Telegraph Rd. Bloomfield Hills, MI 48302 2483343600 Firestone Complete Auto Care Pontiac/Waterford 2385 Elizabeth Lake Rd Waterford, MI 48328-3309 Tow company from sensor: Buckhorn Service 1258 S. Lapeer Road Po box 251 lake Orion MI 48360 (248)693-9375 Goodyear Auto Service Center 50300 Woodward Avenue Pontiac, MI 48342 (248)3356167 Monro Auto dba Speedy Auto 3484 Highland Rd. Waterford Mi 48328 (248)6816500 Other Tow companies had to tow under insurance policy for sensor. It's my truck[XXX] now current address [XXX] and the service work was completed under the following names in the system [XXX] Father),[XXX] (self) and son [XXX]. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Fuel/propulsion system
Fuel erupts from fuel filler neck EVERY TIME the fuel tank is filled, even when filling very slowly. A half-gallon or more of fuel ends up violently spitting out of the filler neck onto people in the vicinity, onto the side of the car, and onto the ground—every time the vehicle is refueled. Many…
Fuel erupts from fuel filler neck EVERY TIME the fuel tank is filled, even when filling very slowly. A half-gallon or more of fuel ends up violently spitting out of the filler neck onto people in the vicinity, onto the side of the car, and onto the ground—every time the vehicle is refueled. Many owners apparently have the exact same issue, judging by the large number of complaints on Durango and Dodge forums. Apparently, there was a recall covering model-year 2005 Durangos for this issue, but the issue is present on our 2006 Durango. This is a clear safety defect that could easily create an extremely dangerous situation.
- Steering
design issue on rack and pinion assembly. Basically metal transfer pipes on side of assembly rust out. This is my second Durango 2006 model to have this problem. Complete loss of steering assist occurs because of loss of power fluid out of fore mentioned pipes. The pipes cannot be repaired, entire…
design issue on rack and pinion assembly. Basically metal transfer pipes on side of assembly rust out. This is my second Durango 2006 model to have this problem. Complete loss of steering assist occurs because of loss of power fluid out of fore mentioned pipes. The pipes cannot be repaired, entire rack and assembly must be replaced. Exposure to road salt is cause of rusting as assembly is totally exposed under vehicle. Stainless steel pipes are a better way except to bean counters.
- Power train
In the winter of 2020 i had to use my 4wd lock in my durango. It never come out of 4wd lock. As a former ase technician and auto center manager I have to say dodge has a mess on their hands. 1st off its ridiculous to stop the flow of technical information to the owners of chrysler vehicles due to…
In the winter of 2020 i had to use my 4wd lock in my durango. It never come out of 4wd lock. As a former ase technician and auto center manager I have to say dodge has a mess on their hands. 1st off its ridiculous to stop the flow of technical information to the owners of chrysler vehicles due to globalization!? I have been working on this vehicle for months as my patience allows. All testing and troubleshooting place the issue back into electrical issues within these durangos. This is a dangerous problem so many people own older dodge & chrysler products affected by this transfer case problem, recall it and get it done! Now it has to go to a chrysler dealer to have the codes cleared by a dodge scanner. Issue with that is the local dodge dealer in the village i live is not known for honesty. I took my durango there when i had issues with security system. I was told it would need a $1000. computer to start, then maybe another $1000. I took it home put a security module in it, been driving it since. Hold Chrysler accountable, do something for these thousands of people who own nice looking nice running dodge products they can't drive due to transfer case issues, and its not just one issue, there are several issues & components in that system that are troublesome!!
- Electrical system · Fuel/propulsion system
TIPM / PCM (Computer modules) these items are affecting most Dodge vehicles that is listed already for recalls only in 2011-2013 and one earlier. This is happening in a lot of Dodges, mine is 1D4HB48N76F[XXX] (2006 Durango 4.7 SLT). They will stop running anywhere, it shuts the fuel pump off where…
TIPM / PCM (Computer modules) these items are affecting most Dodge vehicles that is listed already for recalls only in 2011-2013 and one earlier. This is happening in a lot of Dodges, mine is 1D4HB48N76F[XXX] (2006 Durango 4.7 SLT). They will stop running anywhere, it shuts the fuel pump off where the vehicles no longer gets gas and you have a full tank. It is only a computerized Dealer fix. Their recall for some vehicles will fix my 2006 also by the simply relay bypass that they are installing. PARTS OF THIS DOCUMENT HAVE BEEN REDACTED TO PROTECT PERSONALLY IDENTIFIABLE INFORMATION PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Electrical system · Steering · Visibility/wiper
Been losing power to the car while driving which cause me to lose my steering ability and the 4 wheel drive keeps kicking on and off while driving plus the wiper motor works sometimes and sometimes it don’t. The navigation system comes on and off whenever it wants to and the rear end keeps popping
- Electrical system
TL* the contact owns a 2016 dodge durango. The contact stated while the vehicle was stationary, the vehicle would not start. The contact eventually got the vehicle to start however, several warning lights started to flash and an unknown red warning light was illuminated on the instrument panel. The…
TL* the contact owns a 2016 dodge durango. The contact stated while the vehicle was stationary, the vehicle would not start. The contact eventually got the vehicle to start however, several warning lights started to flash and an unknown red warning light was illuminated on the instrument panel. The vehicle was taken to five star chrysler dodge jeep RAM of macon (3068 riverside dr, macon, ga 31210) in 2010 where it was diagnosed and the contact was informed that the instrument cluster needed to be replaced. The vehicle was repaired however, the failure persisted. The contact then took the vehicle to countryside chrysler dodge jeep RAM (846 e 3RD st, jackson, ga 30233) where it was diagnosed with the instrument cluster needing to be replaced. The contact stated that the vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 64,504.
- Electrical system
2006 dodge grand caravan sxt, safety problems with lift gate when opening with key faub; lift gate opens and immediately goes down (when stationary). If needing to get groceries, or anything from the rear of van, need to have one person holding the lift gate, so the other person can remove items…
2006 dodge grand caravan sxt, safety problems with lift gate when opening with key faub; lift gate opens and immediately goes down (when stationary). If needing to get groceries, or anything from the rear of van, need to have one person holding the lift gate, so the other person can remove items from van, to avoid the liftgate crashing down on you (causing injury and inability for vehicle to function safely). Also, problem with left sliding door lock; does not lock and unlock with key faub; have to manually lock and unlock, even though the rest of the doors lock/unlock, with the key faub. couple of years ago, put groceries in the left side of sliding door and this door would not close, electronically, or manually. Had to drive home in the rain with the left side sliding door, wide open. Believe the hatch lift support part for right and left need replacing, however, the left sliding lock/unlock feature may. Or may not be associated with the electrical problems. It leaves a consumer to get a questionable diagnosis from dealers, or mechanics, who see this as an opportunity to nflate the problem with inaccurate diagnosis and overinflated charges, to take advantage of a consumer.
- Power train
While driving the vehicle it will randomly shut off and lock the steering wheel. it has happened on several occasions but luckily I have been am to restart the vehicle and get it out of the road before being hit.
- Air bags · Engine · Suspension
The vehicle surges and makes a rattling soud when excelling. Feels like it's losing power. It delays starting when the ignition IS on. The suspension feels like it's going to snap. The engine light and air bag light IS displayed on the instrument panel/cluster.
- Power train
The 4WD svc light will come on at random while driving down the highway at various speeds. Sometimes it will be shifting into 4X4 on it's on and when I make a turn, I can feel the 4X4 working without ever physically turning it on. Other times, I can hear the transfer case motor making noise for…
The 4WD svc light will come on at random while driving down the highway at various speeds. Sometimes it will be shifting into 4X4 on it's on and when I make a turn, I can feel the 4X4 working without ever physically turning it on. Other times, I can hear the transfer case motor making noise for about 2 seconds when I open the door or press the key fob button. I pulled a trouble code of c1404. Further research of this code and issue results in over 500 complaints online. It seems to be a common problem that should be fixed by the manufacturer before there IS an accident. This just started on my 2006 dodge durango on 01/11/2021
- Service brakes, hydraulic
TL* the contact owns a 2006 dodge durango. The contact stated while driving 30 mph in snow, the brake pedal was depressed and an abnormal sound was heard. The contact stated no warning light was illuminated. The vehicle loss braking functionality for a short while however, the functionality…
TL* the contact owns a 2006 dodge durango. The contact stated while driving 30 mph in snow, the brake pedal was depressed and an abnormal sound was heard. The contact stated no warning light was illuminated. The vehicle loss braking functionality for a short while however, the functionality returned and the vehicle was driven to his destination. The vehicle was not diagnosed nor repaired. A dealer was not contacted. Upon investigation, the contact associated the failure with nhtsa campaign number: 05v554000 (service brakes, hydraulic) however, the vin was not included. The manufacturer had been informed of failure. The failure mileage was approximately 160,000.
- Fuel system, gasoline
TL* the contact owns a 2006 dodge durango. The contact stated that while refueling, the check engine warning light illuminated. The contact stated that fuel starting to spill from the filler neck. The vehicle was taken to an independent mechanic who diagnosed the vehicle and determined that the…
TL* the contact owns a 2006 dodge durango. The contact stated that while refueling, the check engine warning light illuminated. The contact stated that fuel starting to spill from the filler neck. The vehicle was taken to an independent mechanic who diagnosed the vehicle and determined that the fuel check valve failed and needed to be replaced. The vehicle was not repaired. The failure recurred multiple times. Chrysler dodge jeep of paramus (315 route 4 west, paramus, nj 07652) was contacted and informed the contact that there were no recalls on the vin. The contact referenced tsb number: 10128990 as a possible solution to the failure. The manufacturer was made aware of the failure. The failure mileage was approximately 160,000.
- Electrical system
My dash lights stopped working and the dealer states there isn't a technical bulletin on this problem or a recall. *tr
- Steering
TL* the contact owns a 2006 dodge durango. The contact stated that at startup the steering ceased. The contact stated that extra effort was needed to maneuver the vehicle. The vehicle was not taken to be diagnosed nor repaired. Neither the dealer nor the manufacturer was notified of the failure. The approximate failure mileage was 230,000. The vin was not available.
- Engine
TL* the contact owns a 2006 dodge durango. The contact stated that the front of the vehicle was completely engulfed in flames while parked in her employer's parking lot. The fire department came and put out the flames. There was no police report filed and the contact was told it was her…
TL* the contact owns a 2006 dodge durango. The contact stated that the front of the vehicle was completely engulfed in flames while parked in her employer's parking lot. The fire department came and put out the flames. There was no police report filed and the contact was told it was her responsibility to have the vehicle towed. The front end was charred and burned out. There were no injuries. The dealer and manufacturer had not been contacted yet. The failure mileage was 253,000.
- Fuel/propulsion system
The gas tank overfills when filling the tank. when I fill the tank at the gas station the pump will not shut off until after the tank overflows onto the vehicle and the ground.
- Fuel/propulsion system
When fueling the vehicle the pump shuts off then fuel spews out. This happens every time it IS fueled. The vehicle IS stationary. This IS a fire hazzard as well as a pollution problem. It's my understanding the 2005 model was recalled for this problem. I recently purchased this vehicle used with 195000 miles. I also see where several other people are having this same issue on your website.
- Air bags · Fuel/propulsion system · Power train
TL* the contact owns a 2006 dodge durango. While driving various speeds, the vehicle shut off and the check engine indicator illuminated. The vehicle was pulled over to the side of the road and restarted. Also, while filling up the fuel tank, the pump clicked off at approximately half a tank…
TL* the contact owns a 2006 dodge durango. While driving various speeds, the vehicle shut off and the check engine indicator illuminated. The vehicle was pulled over to the side of the road and restarted. Also, while filling up the fuel tank, the pump clicked off at approximately half a tank without filling up the vehicle. The contact stated that when she attempted to continue filling up the tank, fuel spewed from the nozzle. The failures recurred several times. The vehicle was taken to haddad dodge RAM (661-241-8095, located at 3000 harris rd, bakersfield, ca 93313) where it was repaired per nhtsa campaign number: 16v352000 (air bags) and nhtsa campaign number: 15v313000 (air bags). The contact stated that the technician did not reveal the recall parts that were replaced. The manufacturer was not made aware of the failures. The failures recurred and the air bag indicators illuminated occasionally after the recall repairs were performed. The vehicle was not repaired. The failure mileage was not provided.
- Power train · Steering
My dodge durango will engage by itself into 4 wheel drive while driving at slow or very high speed-it IS an issue with the transfer case electricly-could cause accident when this does it on it's own out of nowhere & many complaints have been filed about this issue-it does it at stopping,going slow or even at 75 mph
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Fleet Vehicle Recall Completion Audit
On November 18, 2010, NHTSA's Recall Management Division (RMD) opened an audit query (AQ10-001) to investigate recall remedy completion by rental car companies on safety recall campaigns.It was expected to provide the agency an indication of how completely and how quickly rental car fleets perform necessary…
On November 18, 2010, NHTSA's Recall Management Division (RMD) opened an audit query (AQ10-001) to investigate recall remedy completion by rental car companies on safety recall campaigns.It was expected to provide the agency an indication of how completely and how quickly rental car fleets perform necessary recall-related remedies on the vehicles owned and then rented/leased for use on the roadways.RMD queried three (3) major motor vehicle manufacturers (Ford, Chrysler, and General Motors) and requested data regarding completion figures for fifteen (15) discreet safety recalls.Analysis of this data demonstrated that rental car recalls completion was neither complete nor consistent.The rental car companies representing the largest market share in the industry were then queried as to their respective policies for the rental, lease, and sale of vehicles with open recalls.The data and responses from the manufacturers and the rental car companies can be found in the document repository by accessing the ?Associated Documents link above.In December 2015, Congress enacted the Fixing America's Surface Transportation (FAST) Act.One section of the Act prohibits rental car companies from renting, leasing, or selling motor vehicles subject to open safety recalls.With the passage of the FAST Act and its prohibition, there is no continuing need for the agency to investigate rental car recall completions.Accordingly, this investigation is closed.The agency reserves the right to open any future investigations, including audits of individual recalls, or groups of recalls, or rental car companies, to examine more closely safety recalls performance and completion issues in this area.
- Side curtain air bag failure
Odi's investigation identified no issues in the design, manufacturing process, or quality control process of the side curtain air bags used in the dodge durango vehicles.there have been no reported field incidents of side curtain air bag failures similar to the failures that occurred during the nhtsa research testing…
Odi's investigation identified no issues in the design, manufacturing process, or quality control process of the side curtain air bags used in the dodge durango vehicles.there have been no reported field incidents of side curtain air bag failures similar to the failures that occurred during the nhtsa research testing of the durango air bags.additional nhtsa testing conducted during this investigation resulted in no diffuser tube failures.a safety-related defect has not been identified at this time and further use of agency resources does not appear to be warranted.accordingly, this investigation IS closed.the closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist.the agency will monitor this issue and reserves the right to take further action if warranted by the circumstances.see document file for additional information.
- Side curtain air bag failure
Odi has upgraded this investigation to an engineering analysis (ea07-003) to continue its investigation of the subject issue.
- Steering wheel and steering shaft bolts
On march 9, 2006 odi upgraded preliminatry evaluation pe05-056 to engineerning analysis ea06-004 to investigate allegations of loose or missing steering shaft coupling bolts and steering column retaining bolts in model year (my) 2004 through 2006 dodge durango sport utility vehicles and my 2005 through 2006 dodge…
On march 9, 2006 odi upgraded preliminatry evaluation pe05-056 to engineerning analysis ea06-004 to investigate allegations of loose or missing steering shaft coupling bolts and steering column retaining bolts in model year (my) 2004 through 2006 dodge durango sport utility vehicles and my 2005 through 2006 dodge dakota pickup trucks.either condition could result in a loss of steering control.although odi identified some quality issues in the manufacturing processes for the dakota and durango vehicles, the data do not indicate that a safety defect trend IS present in either population.the failure rates are low for each condition and trend analyses indicate that problems with the subject bolts were isolated to a few units affected by assembly error that were detected either pre-sale or occurred early in vehicle service.further use of agency resources in this matter does not appear to be warranted.the agency will continue to monitor complaints and other information relating to the alleged defect in the sugject vehicles and will take furhter action inthe the future if warranted.for more information see the attached closing report.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010205Plate - Planetary
- 10229256KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10229181Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10228093KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik
- 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
- 10223602Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221686KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220994Part Description: Insulator in Lever Assembly - Valve Body - Trans Issue Description: The manual valve insulator, attaching rivet and an instruction sheet are now available as a kit. If the insulator requires replacement please order 68253099AA. Note: Insulator color is not relevant for service
- 10220868Transfer Case Gear Motor/Actuator Installation Guidelines.
- 10220837GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
- 10220471Mechanical rocker arm, intake, 1.7 ratio.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10217514Key Blank With Transmitter The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.
- 10216276Fuel Spit Back During Refueling Due To Inlet Check Valve (X48 Lifetime Warranty Extension) This bulletin involves replacing the fuel filler tube if the condition occurs.When removing the existing fuel filler tube note how it comes out to aid in installation of the new part. Some customers may experience a fuel spit back condition during a refueling event.
- 10191460Valve Body. These may cause over drive cycling.
- 10191442Mechanical rocker arm, intake, 1.7 ratio.
- 10190615Transfer Case Gear Motor/Actuator Installation Guidelines.
- 10190584GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
- 10189390Fuel Spit Back During Refueling Due To Inlet Check Valve (X48 Lifetime Warranty Extension) This bulletin involves replacing the fuel filler tube if the condition occurs. NOTE: When removing the existing fuel filler tube note how it comes out to aid in installation of the new part. Some customers may experience a fuel spit back condition during a refueling event.
- 10181451KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10141260KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik
- 10139982Key Blank With Transmitter The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.
- 10139704UConnect Hands Free Module Fails To Respond Due To Module Lock Up This bulletin involves replacing the Hands Free Module (HFM) if required. The HFM fails to operate causing the UConnect Hands Free Communications system to not respond when system activation is attempted by the customer. Further diagnosis may reveal that when the wiTECH scan tool is used to read Diagnostic Trouble Codes (DTCs) the tool indicates that the module is not responding. Other modules on the bus may display loss of communication with the HFM. If the Hands Free Communication system is unresponsive then the HFM may require electronic reset.To perform a electronic reset, turn off the vehicle and pull the Ignition Off Drain (IOD) fuse. Wait a few minutes before reinstalling the IOD fuse and checking if the HFM is communicating. If the HFM still will not communicate, then normal No Response diagnostic should be performed. If the HFM is working properly, the module should be replaced to prevent this condition from happening again.
- 10139595Part Description: Insulator in Lever Assembly - Valve Body - Trans Issue Description: The manual valve insulator, attaching rivet and an instruction sheet are now available as a kit. If the insulator requires replacement lease order 68253099AA. Note: Insulator color is not relevant for service
- 1013652756045489A$ - Neutral Safety Switch - Trans Assy 06036369AA Screw and Washer is now available as a service part , 2 required to attach Neutral Start Switch
- 10136486Fuel Spit Back During Refueling Due To Inlet Check Valve (X48 Lifetime Warranty Extension) This bulletin involves replacing the fuel filler tube if the condition occurs.When removing the existing fuel filler tube note how it comes out to aid in installation of the new part. Some customers may experience a fuel spit back condition during a refueling event.
- 1012901156045489A$ - Neutral Safety Switch - Trans Assy 06036369AA Screw and Washer is now available as a service part , 2 required to attach Neutral Start Switch
- 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10128990Fuel Spit Back During Refueling Due To Inlet Check Valve (X48 Lifetime Warranty Extension) This bulletin involves replacing the fuel filler tube if the condition occurs.When removing the existing fuel filler tube note how it comes out to aid in installation of the new part. Some customers may experience a fuel spit back condition during a refueling event.
- 10121927NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
- 10108545"KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~ For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option."
Every Dodge Durango model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.